I had an upgrade on Android Studio from Arctic Fox to Bumblebee v2021.1.1 on Mac M1 and surprisingly iOS version of Flutter app stopped working. It says
Cocoapods not installed.skipping pod install
However, I can locate cocoapods and its components installed
gem list --local | grep cocoapods
I can run the iOS project from Xcode without any issues, and looks like linking of cocoapods is messed up on Android upgrade. Looking for some help.
It's a issue of flutter integration with new update of android studio
Here you can find more about this https://github.com/flutter/flutter/issues/97251
for now there are two solutions:
Open android studio using command line, run below command in terminal -
open /Applications/Android\ Studio.app
Add missing flag to android studio, run below command in terminal -
chmod +x /Applications/Android\ Studio.app/Contents/bin/printenv
I'm trying to build a flutter app on M1 mac and getting the following error.
$ flutter build ios --release
Building XXX for device (ios-release)...
Automatically signing iOS for device deployment using specified development team in Xcode project: XXX
Running pod install... 13.2s
Running Xcode build...
Xcode build done. 6.7s
Failed to build iOS app
Error output from Xcode build:
↳
objc[65074]: Class AMSupportURLConnectionDelegate is implemented in both ?? (0x1f66de518) and ?? (0x1160d82b8). One
of the two will be used. Which one is undefined.
objc[65074]: Class AMSupportURLSession is implemented in both ?? (0x1f66de568) and ?? (0x1160d8308). One of the two
will be used. Which one is undefined.
** BUILD FAILED **
Xcode's output:
↳
note: Using new build system
note: Building targets in parallel
note: Planning build
note: Constructing build description
error: The linked framework 'Pods_Runner.framework' is missing one or more architectures required by this target:
armv7. (in target 'Runner' from project 'Runner')
Encountered error while building for device.
Here is my flutter doctor -v
flutter doctor -v
[✓] Flutter (Channel stable, 1.22.4, on macOS 11.0 20A2411 darwin-arm, locale en-AU)
• Flutter version 1.22.4 at /Users/mlee/development/flutter
• Framework revision 1aafb3a8b9 (3 weeks ago), 2020-11-13 09:59:28 -0800
• Engine revision 2c956a31c0
• Dart version 2.10.4
[✓] Android toolchain - develop for Android devices (Android SDK version 30.0.2)
• Android SDK at /Users/mlee/Library/Android/sdk
• Platform android-30, build-tools 30.0.2
• Java binary at: /Applications/Android Studio.app/Contents/jre/jdk/Contents/Home/bin/java
• Java version OpenJDK Runtime Environment (build 1.8.0_242-release-1644-b3-6915495)
• All Android licenses accepted.
[✓] Xcode - develop for iOS and macOS (Xcode 12.2)
• Xcode at /Applications/Xcode.app/Contents/Developer
• Xcode 12.2, Build version 12B45b
• CocoaPods version 1.10.0
[!] Android Studio (version 4.1)
• Android Studio at /Applications/Android Studio.app/Contents
✗ Flutter plugin not installed; this adds Flutter specific functionality.
✗ Dart plugin not installed; this adds Dart specific functionality.
• Java version OpenJDK Runtime Environment (build 1.8.0_242-release-1644-b3-6915495)
[✓] VS Code (version 1.51.1)
• VS Code at /Applications/Visual Studio Code.app/Contents
• Flutter extension version 3.16.0
[✓] Connected device (2 available)
! Doctor found issues in 1 category.
try a simple, documented step first
In Terminal:
sudo xcode-select -r
explanation
The command resets xcode to the default path (see documentation excerpt below). This command
resolved the issue for me and
avoided the risk of introducing random, undocumented ideas from strangers.
These advantages make it worth trying first, especially since documented approaches typically won't interfere with future version upgrades. Experimental workarounds may need to be undone first.
documentation
% xcode-select -h
Usage: xcode-select [options]
Print or change the path to the active developer directory. This directory
controls which tools are used for the Xcode command line tools (for example,
xcodebuild) as well as the BSD development commands (such as cc and make).
Options:
-h, --help print this help message and exit
[...]
-r, --reset reset to the default command line tools path
I had the same issue. I saw the same error when I ran flutter build ios.
The error message was displayed red color on my VS code terminal, but it was kind of misleading. I found it was not the main issue.
The actual issue should be on the following error section.
So, please run flutter build ios --verbose and read the output carefully.
In my situation, there were other issues of the failure of flutter build ios. The issues were like forget to put in GoogleService-Info.plist or iOS target version is less than the requirement of flutter packages.
installing ffi helped me. I was stucked from last two days and then I finally found this solution.
arch -x86_64 sudo gem install ffi
use this if you are using m1
sudo gem install ffi
if you are intel Macs
Thanks Hope this will work.
Got the same error, also on an M1 macbook. Fixed it by:
flutter clean inside the project directory.
flutter build ios
'Start debugging' (vs code).
Somehow I managed to fix the issue by removing the flutter/bin/cache folder.
This could be a combination of other random things I did to solve this issue.
Things I've tried.
Running the terminal using Rosetta.
Upgrade dependency versions as well as running flutter pub upgrade
Remove ios/Pods & Podfile.lock
Reorganise xcconfig files - make sure to include Generated.xcconfig
I've created base.xcconfig and configure it with the existing Pods-Runner.release.xcconfig
This is my base.xcconfig
#include "Generated.xcconfig"
#include "Env-defaults.xcconfig"
#include "Env.xcconfig"
I was running into the same error using the M1 chip on my mac. I created a new project and realized that the new projects build settings exclude
Any IOS Simulator SDK: arm64 i386
under 'Excluded Architectures'
I replaced all /app/ios files with new from fresh application created by flutter create
FINALLY got it working -- here's what I had to do starting from the project root:
cd ios
rm -rf ~/Library/Caches/CocoaPods
rm -rf Podfile.lock
rm -rf Pods
rm -rf ~/Library/Developer/Xcode/DerivedData/*
Then:
pod deintegrate
pod setup
pod install
For anyone running into this issue on M1 run the iTerm/Terminal from Rosetta. Follow the below commands.
Installation of Rosetta,
softwareupdate --install-rosetta
Running from Rosetta,
Goto applications folder.
Right click on iTerm >> Get Info.
Check open using Rosetta.
Thats it open the terminal, the issue will be fixed.
Got the same issue on Macbook M1.
Changed the iOS Deployment Target of the project Runner to 10.0.
Fixed the issue.
Normally it is working after these steps
flutter clean
flutter pub get
cd ios
pod install
cd ..
flutter build ios
This time it worked for me with an additional command flutter upgrade pub as I was using the newer version of flutter with old pub file. I hope it may help someone using M1 processor.
My Solution for this problem was:
Delete /flutter/iOS/Podfile & /flutter/iOS/Pods & flutter/iOS/Podfile.lock
flutter clean
Enjoy :)
I solved this problem!
rebuild new flutter project
open terminal
move to ios directory (project)
pod init
pod install
modify ios/Podfile file as this content
link : https://github.com/t-sakurai816/flutter_todo_new/blob/main/ios/Podfile
I tried pretty much everything yet nothing worked for me.
Except this -
Open your podfile and do the following
change
use_frameworks!
to
use_frameworks! :linkage => :static
I kept running into a similar problem from React Native too on M1 and I am leaving this here if anyone might need it.
What worked for me is having to run the project from inbuilt terminal with Rosetta enabled. All the project related config, npm install and pod installs had to happen on inbuilt terminal for the error to go away
npm install
cd ios && pod install && cd ..
npm run ios
If you have installed cocoapods using gem as well as home-brew also then please remove gem installed cocoapods.
On my Mac mini m1 cocoapods installed using "gem" was not working so installed from home-brew. Because of that system was having both versions. I got this same problem for every flutter command run because of this.
After removing "sudo gem uninstall cocoapods" this error disappeared.
Open ios/Runner.xcworkspace in xCode and try to run it on your iPhone and the error should tell you your issue.
In my case, I had to login with my apple ID in Xcode and download certificates.
This was quite a journey for me to fix. I tried many things and I'm not exactly sure which one fixed it but here's what I did
First off try building the app for Android instead of iOS. This will tell you if the error is specific to iOS or if it's something else. After building for android I had the error "member not found package root". To fix this I did
flutter pub upgrade
I use Apple silicon, I ran this command
sudo gem install ffi
Along my journey of fixing this I realized I use the system ruby when I should be using homebrew installed ruby
brew install ruby
echo 'export PATH="/usr/local/opt/ruby/bin:$PATH"' >> ~/.zshrc
uninstall all cocoapods from gem
gem list --local | grep cocoapods | awk '{print $1}' | xargs sudo gem uninstall
install cococapods from brew
brew install cocoapods
then try and rebuild your project
Delete the line
#include "Pods/Target Support Files/Pods-Runner/Pods-Runner.debug.xcconfig"
in ios/flutter/Debug.xcconfig
Works for me
I've fixed the issue by doing this:
cd ios
pod init
pod install
hope it will work for you also
It seems this error may occur due to various reasons and this 'Error output from Xcode build:' does not reflect the actual error.
I was able to fix this issue by opening ios/Runner.xcworkspace using Xcode and selecting the correct team in 'Signing & Capabilities'. Then I was able to run flutter run without getting this error
If you see an additional error that states: error: no such module 'Flutterz', go into your AppDelegate.swift file and change import Flutterz to import Flutter.
After fixing above, I no longer received the AMSupportURLConnectionDelegate is implemented in both error message.
I ran into the problem 2 times and it had 2 times separate root causes.
First cause was that one of the libraries I used got outdated - after upgrading from 1.x to 2.x. It was NOT visible on the pub.dev page that this plugin got outdated, only on the respective Github page. It was some Google library. Once the plugin got commented out, it worked.
The second case was way harder to find. It happened after upgrading to 2.2.0 and some of my images were suddenly not working anymore. I needed to comment them out, then the error went away. No clue why these PNGs suddenly not work anymore, but it is reproduce-able. Every time you find an image that doesn't work, run flutter clean afterwards followed by pub get and only THEN start again a build on the simulator.
Hope this helps someone, it cost me more than 5 days...
For the people using M1 chips:
In Xcode, target Runner, Go to Build Settings
Check Architecture and select standard if arm architecture is selected.
I had the same problem.
I fixed the problem:
Rename the ios folder to ios.old
I have created a new flutter project and copied the ios folder to my project
I have copied the info.plist file from the ios.old folder to the new ios folder
I think it would only be necessary to copy the images of the icons.
In my case, the problem was caused by an invalid release version number, it should contain only digits, no strings
Try Selecting For install builds only in the run script in the Build phases tab.
I changed
Another fix could be
flutter clean
rm -rf ios/Flutter/Flutter.framework
cd ios
pod install
Thanks to https://github.com/CocoaPods/CocoaPods/issues/7234#issuecomment-606591037
In my case the solotion was to comment this line of podfile:
# platform :ios, '14.3'
It has happened to me a few times. Almost always it was related to a mistyped name of an asset or pointing to a wrong asset package.
I installed Flutter following official document and also installed Flutter and Dart plugin on Android Studio.
But, I can't see File>New Flutter Project wizard on Android Studio 3.0.1
I run "flutter doctor" command. See the below output.
Doctor summary (to see all details, run flutter doctor -v):
[✓] Flutter (Channel beta, v0.1.5, on Mac OS X 10.13.3 17D102, locale en-TR)
[✓] Android toolchain - develop for Android devices (Android SDK 27.0.3)
[✓] iOS toolchain - develop for iOS devices (Xcode 9.2)
[✓] Android Studio (version 3.0)
[✓] IntelliJ IDEA Community Edition (version 2017.3.3)
[!] Connected devices
! No devices available
! Doctor found issues in 1 category.
You need check the “AndroidAPK Support” in your Plugins.
See this screenshot:
If you are sure to have both Dart and Flutter plugins correctly installed, check again your Plugins and be sure that Android APK Support is enabled.
If it isn't, enable it!
Et voilà! Now everything should be fine:
You can find the plugin menu inside the Welcome page
or, when you have a project opened, inside the Preferences menu:
Had the same problem. Check-in Android Studio if the Dart and Flutter plugins are both installed and marked with a lock symbol in Preferences --> Plugins.
Anyway, the following procedure helped me:
uninstall the Flutter plugin
restart Android Studio.
uninstall the Dart plugin
restart Android Studio again which seemed important to do
install the Dart plugin again
restart Android Studio although it is annoying
install the Flutter plugin again
and guess: restart Android Studio
After the last restart I saw the success message:
I assume we both installed both plugins without restarting after Dart.
I also faced it but soon I solved it
I simply install flutter and dart plugins and restarted Android Studio.
After restarting I noticed that there is no Wizard for creating flutter apps. But soon I realized that I have disabled some plugins ( Android Studio's default plugins ) so I enabled all plugins and restarted Android Studio again and BOOM! Now there is a wizard for Creating Flutter Apps.
Hope this helps you !
My answer will be nearly same with #VickyBOSS but I'll upload screenshots of before and after ;)
First and foremost Flutter and Dart plugins must be installed before.
After installing these plugins you can check if it is ok or not with flutter doctor
If you hadn't installed the plugins you would have this:
Android Studio
At first, I didn't see "Start a new Flutter project"
After:
I have also same problem.but what can you do in that situation is Just create the project with command line :
flutter create your_app_name
Now open android studio and open that project. Hope this works well
Yes first update all your plugins related to flutter and dart .
"AndroidAPK Support" plugin(install /enable /update).
3.This will work for all the AS , checked this on AS 3.4 also .
Thanks to the guys who answered before me .
I also ran into this issue and the steps above didn't work. What I did was check which plugins I have enabled and realized that Android APK Support and Android NDK Support was disabled in my AS. After enabling this and restarting android studio everything seems to be working correctly.
This worked for me. Install Dart and Flutter manually from Plugins:
Open Plugins (For Mac: Configure -> Plugins OR Android Studio -> Preferences -> Plugins)
Search for Dart -> Search in repositories -> Install -> Restart Android studio
Search for Flutter -> Search in repositories -> Install -> Restart Android Studio
Got the same problem, fixed it by installing dart first using the plugin manager of android studio. Then install flutter plugin.
How to set flutter wizard in Android Studio 3.0
File > Close Project
Configure > Check for Updates
You will find Flutter and Dart updates. Update and Restart. Downloading Patch.
File > New Flutter Project or Select new Flutter Project.
Hope your problem resolved.
Happy Codings!!
It was little different in my case. After upgrading to newest release of Android studio. The dart flutter and other related plugins were in incompatible mode.
You can check that by going to Android Studio=> Plugins.
I simply update those plugins and then restart the IDE and it works fine.
Just Restore your IDE settings as shown in image
File -> Manage Ide Settings -> Restore default settings
This will remove your installed plugins and ask you again to install them.
Update flutter using below command
flutter upgrade
and again create flutter application from android studio
For some reason, Flutter refused to show New Flutter Project in android studio 3.1
but when I use android studio 3.2 it works fine after installing Dart and flutter plugins.
Make sure you have flutter and dart installed, then enable Android apk support; this helped me
Uninstall Flutter and Dart plugin
Restart Android Studio
Install Flutter Plugin (it will prompt you to install Dart plugin as well. Accept it)
Restart Android Studio
Also, reminder to check whether the plugin is enabled or not. Go to Preferences -> Plugins -> Flutter/Dart. Although, it's enabled by default, you may have had to disable it at some point in the past. In that case, just enable it from Preferences -> Plugin -> Flutter/Dart if you want to.
In my case I did not have APK/NDK support Plugin, added that and it worked. Of course restart IDE couple of times.
Well go to command line and check flutter doctor , if all good give command to your project directory
flutter create appname
and import this to androidstudio , this will generate necessary plugins.
I've got the same problem and finally sorted out. It's usually caused by your upgrade of Android Studio from 2.x to 3.x at the same time.
In short, it's because Flutter is not correctly configurated, but behind the scene there might be different reasons, so the universal solution is to run flutter doctor -v to diagnose and see what's missing.
[First make sure you've already followed the setup steps in Flutter's official documentation and have your Android SDK updated.]
In my own case, a couple of things to fix:
Update the JAVA_HOME path in .bash_profile. Because I have 2 Java versions installed and so I updated it to use the same as Android Studio does. This is critical as flutter doctor relies on Java to check some of your configurations.
Some Android licenses not accepted - follow flutter doctor's advice to accept all licenses.
Android Studio's Flutter plugin version too low - simply update it.
Even if you have done everything here,it may not work if you have Android Studio 4.x or canary
It works only in lower version
In my case I only miss Dart plugin so i installed and on IDE restart it was there
I tried running command cordova platform add ios but when the command is executed always appears an error like in the picture.
How do I fix this?
Note:
I use NodeJS v0.10.25
Prerequisites
Before running any command-line tools, you need to install SDKs for each platform you wish to target.
To add support or rebuild a project for any platform, you need to run the command-line interface from the same machine that supports the platform's SDK. The CLI supports the following combinations:
iOS (Mac)
Android (Mac, Linux)
Blackberry (Mac, Windows)
Windows Phone 7 (Windows)
Windows Phone 8 (Windows)
http://docs.phonegap.com/en/edge/guide_platforms_ios_index.md.html