I am using official php docker image: 7.1-apache
I am trying to install composer through the docker console and following the steps provided here: https://getcomposer.org/download/
When I get to the third step: php composer-setup.php
I get: Segmentation fault
I just have no idea what to do. When I was on a lower version of php I had no problems installing composer.
Here is my dockerfile:
FROM php:7.1-apache
RUN apt-get update && apt-get install -y git
# Install Xdebug
RUN curl -fsSL 'https://xdebug.org/files/xdebug-2.4.0.tgz' -o xdebug.tar.gz \
&& mkdir -p xdebug \
&& tar -xf xdebug.tar.gz -C xdebug --strip-components=1 \
&& rm xdebug.tar.gz \
&& ( \
cd xdebug \
&& phpize \
&& ./configure --enable-xdebug \
&& make -j$(nproc) \
&& make install \
) \
&& rm -r xdebug \
&& docker-php-ext-enable xdebug
# Add xdebug cfg
RUN echo "xdebug.remote_enable=1" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
RUN echo "xdebug.remote_autostart=1" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
RUN echo "xdebug.remote_connect_back=1" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
RUN echo "xdebug.remote_port=9001" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
RUN echo "xdebug.remote_host=172.17.0.1" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
RUN echo "xdebug.remote_log=php7-xdebug.log" >> /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini
# Install Composer
RUN curl -sS https://getcomposer.org/installer | php -- --install-dir=/usr/bin --filename=composer
# Install mcrypt
RUN apt-get install -y libmcrypt-dev
RUN docker-php-ext-install mcrypt
# Enable mod_rewrite and ssl
RUN a2enmod rewrite
RUN a2enmod ssl
# Restart apache2 to affect changes
RUN service apache2 restart
Initially this worked perfectly with php version 7.0. 7.1, however, is not happy with this.
I just had the same problem, and it was solved when I updated the Dockerfile
RUN apk add ca-certificates
Then it worked.
RUN curl -sS https://getcomposer.org/installer | php && mv composer.phar /usr/local/bin/composer
Related
I am getting the following error inside my docker container:
How can I update my dockerfile, so that while building the container it builds with a version of wkhtmltopdf with patched Qt.
Following is my dockerfile:
...
RUN apt-get install -y wkhtmltopdf
RUN apt-get install -y xvfb
COPY requirements.txt requirements.txt
RUN pip3 install -r requirements.txt
...
Installing the following dependencies with wkhtmltopdf worked out for me:
...
RUN apt-get update
RUN apt-get install -y xvfb
RUN apt-get install -y wget
RUN apt-get install -y openssl build-essential xorg libssl1.0-dev
RUN wget https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/0.12.4/wkhtmltox-0.12.4_linux-generic-amd64.tar.xz
RUN tar xvJf wkhtmltox-0.12.4_linux-generic-amd64.tar.xz
RUN cp wkhtmltox/bin/wkhtmlto* /usr/bin/
...
FROM php:7.4-fpm
# Install dependencies, libssl1.1-dev ?
RUN apt-get update && apt-get install -y \
xvfb \
wget \
openssl \
xorg \
libssl1.1 \
build-essential \
libpng-dev \
libjpeg62-turbo-dev \
libfreetype6-dev \
locales \
zip \
jpegoptim optipng pngquant gifsicle \
vim \
unzip \
git \
curl \
libzip-dev \
dcmtk \
nginx \
supervisor
RUN wget https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/0.12.4/wkhtmltox-0.12.4_linux-generic-amd64.tar.xz
RUN tar xvJf wkhtmltox-0.12.4_linux-generic-amd64.tar.xz
RUN cp wkhtmltox/bin/wkhtmlto* /usr/bin/
# Clear cache
RUN apt-get clean && rm -rf /var/lib/apt/lists/*
COPY php.ini /usr/local/etc/php/php.ini
# adjustments to php.ini base on the production version.
# Install extensions and configure
RUN docker-php-ext-configure gd --with-freetype --with-jpeg
RUN docker-php-ext-configure zip
RUN docker-php-ext-install pdo_mysql zip exif pcntl gd sockets
# RUN sed -E -i -e 's/max_execution_time = 1200/max_execution_time = 120/' /etc/php.ini \
# && sed -E -i -e 's/memory_limit = 128M/memory_limit = 512M/' /etc/php.ini \
# && sed -E -i -e 's/post_max_size = 8M/post_max_size = 64M/' /etc/php.ini \
# && sed -E -i -e 's/upload_max_filesize = 2M/upload_max_filesize = 64M/' /etc/php.ini
# php artisan storage:link
# THAT NEEDS TO BE RUN FROM THE nginx-home/LaravelPortal/ directory to symlink the storage directory. NEED to figure out how to do that.
# sudo docker exec -it orthanc-docker-dev_ris_php-fpm_1 /bin/bash
COPY default.conf /etc/nginx/conf.d/default.conf
COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
COPY entrypoint.sh /
ENTRYPOINT ["/bin/bash","/entrypoint.sh"]
On a debian machine, I suddenly cannot install ssmtp via the following
apt-get update && apt-get install ssmtp
Before it was all working seamlessly up until now.
Also just an FYI.
I am doing this on a dockerFile on a debian container.
Just for your perusal this is the docker file I am running
FROM php:fpm
RUN apt-get update && apt-get install -q -y \
git g++ libcurl4-gnutls-dev libicu-dev libmcrypt-dev \
libpq-dev libxml2-dev \
unzip zlib1g-dev \
procps\
zip \
libzip-dev \
ssmtp mailutils && rm -rf /var/lib/apt/lists/*
RUN docker-php-ext-install \
pdo_mysql mysqli curl json mbstring pdo pdo_pgsql \
&& docker-php-ext-enable mysqli
RUN docker-php-ext-configure pdo_mysql
RUN echo "hostname=localhost.localdomain" > /etc/ssmtp/ssmtp.conf
RUN echo "root=root#example.com" >> /etc/ssmtp/ssmtp.conf
RUN echo "mailhub=maildev" >> /etc/ssmtp/ssmtp.conf
RUN echo "sendmail_path=sendmail -i -t" >> /usr/local/etc/php/conf.d/php-sendmail.ini
RUN echo "localhost localhost.localdomain" >> /etc/hosts
ENV TZ=Asia/Manila
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN curl -sS https://getcomposer.org/installer | php -- --install-dir=/usr/bin/ --filename=composer
RUN curl -sSL https://phar.phpunit.de/phpunit.phar -o /usr/bin/phpunit && chmod +x /usr/bin/phpunit
I ran into the same issue, but it has to do with the fact that the package sSMTP package is currently unmaintained.
This package has been orphaned since 2019-03-19. msmtp can be used as an alternative.
So the fix would be replacing your sSMTP package with the suggested msmtp package.
I'm working on a project that uses a Docker image for a specific feature, other than that I don't need docker at all so I don't understand much about it. The issue is that Docker doesn't finds a file that is actually in the folder and the build process breaks.
When trying to create the image using docker build -t project/render-worker . the error is this:
Step 18/23 : RUN bin/composer-install && php composer-setup.php --install-dir=/bin && php -r 'unlink("composer-setup.php");' && php /bin/composer.phar global require hirak/prestissimo
---> Running in 695db3bf2f02
/bin/sh: 1: bin/composer-install: not found
The command '/bin/sh -c bin/composer-install && php composer-setup.php --install-dir=/bin && php -r 'unlink("composer-setup.php");' && php /bin/composer.phar global require hirak/prestissimo' returned a non-zero code: 127
As mentioned the file composer-install does exist and this is what's in it:
#!/bin/sh
EXPECTED_SIGNATURE="$(wget -q -O - https://composer.github.io/installer.sig)"
php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
ACTUAL_SIGNATURE="$(php -r "echo hash_file('SHA384', 'composer-setup.php');")"
if [ "$EXPECTED_SIGNATURE" != "$ACTUAL_SIGNATURE" ]
then
echo 'ERROR: Invalid installer signature'
rm composer-setup.php
fi
Basically this is to get composer as you can see.
This is the Docker file:
FROM php:7.2-apache
RUN echo 'deb http://ftp.debian.org/debian stretch-backports main' > /etc/apt/sources.list.d/backports.list
RUN apt-get update
RUN apt-get install -y --no-install-recommends \
libpq-dev \
libxml2-dev \
ffmpeg \
imagemagick \
wget \
git \
zlib1g-dev \
libpng-dev \
unzip \
mencoder \
parallel \
ruby-dev
RUN apt-get -t stretch-backports install -y --no-install-recommends \
libav-tools \
&& rm -rf /var/lib/apt/lists/*
RUN docker-php-ext-install \
pcntl \
pdo_pgsql \
pgsql \
soap \
gd \
zip
RUN gem install compass
RUN a2enmod rewrite
ENV APACHE_RUN_USER root
ENV APACHE_RUN_GROUP root
EXPOSE 80
WORKDIR /app
COPY . /app
# Configuring apache to run the symfony app
COPY config/docker/apache.conf /etc/apache2/sites-enabled/000-default.conf
RUN echo "export DATABASE_URL" >> /etc/apache2/envvars \
&& echo ". /etc/environment" >> /etc/apache2/envvars
RUN wget -cqO- https://nodejs.org/dist/v10.15.3/node-v10.15.3-linux-x64.tar.xz | tar -xJ
RUN cp -a node-v10.15.3-linux-x64/bin /usr \
&& cp -a node-v10.15.3-linux-x64/include /usr \
&& cp -a node-v10.15.3-linux-x64/lib /usr \
&& cp -a node-v10.15.3-linux-x64/share /usr/ \
&& rm -rf node-v10.15.3-linux-x64 node-v10.15.3-linux-x64.tar.xz
RUN bin/composer-install \
&& php composer-setup.php --install-dir=/bin \
&& php -r "unlink('composer-setup.php');" \
# Install prestissimo for dramatically faster `composer install`
&& php /bin/composer.phar global require hirak/prestissimo
RUN APP_ENV=prod APP_SECRET= DATABASE_URL= AWS_KEY= AWS_SECRET= AWS_REGION= MEDIA_S3_BUCKET= \
GIPHY_API_KEY= FACEBOOK_APP_ID= FACEBOOK_APP_SECRET= \
GOOGLE_API_KEY= GOOGLE_CLIENT_ID= GOOGLE_CLIENT_SECRET= STRIPE_SECRET_KEY= STRIPE_ENDPOINT_SECRET= \
THEYSAIDSO_API_KEY= REV_CLIENT_API_KEY= REV_USER_API_KEY= REV_API_ENDPOINT= RENDER_QUEUE_URL= \
CLOUDWATCH_LOG_GROUP_NAME= \
php /bin/composer.phar install --no-interaction --no-dev --prefer-dist --optimize-autoloader --no-scripts \
&& php /bin/composer.phar clear-cache
RUN npm install \
&& node_modules/bower/bin/bower install --allow-root \
&& node_modules/grunt/bin/grunt
# Don't allow it to keep logs around; they're emitted on STDOUT and sent to AWS
# CloudWatch from there, so we don't need them on disk filling up the space
RUN mkdir -p var/cache/prod && chmod -R 777 var/cache/prod
RUN mkdir -p var/log && ln -s /dev/null var/log/prod.log \
&& ln -s /dev/null var/log/prod.deprecations.log && chmod -R 777 var/log
CMD ["/usr/bin/env", "bash", "./bin/start_render_worker"]
Like I said, unfortunately I don't have the slightest idea of how docker works and what's going on, just that I need it. I'm running docker in Win10 Pro and to make matters even worst it is actually working for another dev running Win10. We tried a few things but we can't make it work. I tried cloning the repo in other locations with no success at all. Everything before this particular step runs correctly.
[EDIT]
As suggested by the users I ran RUN ls bin/ before the composer install line and this is the result:
Step 18/24 : RUN ls bin/
---> Running in 6cb72090a069
append_captions
capture
composer-install
concat_project_video
console
encode_frames
encode_frames_to_gif
format_video_for_concatenation
generate_meme_bar
image_to_video
install.sh
phpcs
phpunit
process_render_queue
publish_docker_image
run_animation_worker
run_render_worker
run_render_worker_osx
start_render_worker
update
Removing intermediate container 6cb72090a069
As you can see composer-install is there so this is quite baffling.
Also I checked and set the line ending sequence to LF and the result is the same error.
[SECOND EDIT]
I added COPY bin/composer-install /bin
Then RUN ls bin/
And the results are the same. The ls command finds the file but the error persists. Also adding a slash before bin doesn't change anything :(
FROM some-build:latest as build
COPY / /var/www/html
WORKDIR /var/www/html
RUN cd /var/www/html && composer install
FROM some-build2:latest as run
COPY --from=build /var/www/html /var/www/html
ENV PATH ${HOME}/local/bin:${PATH}:/home/site/wwwroot
RUN cd /var/www/html && \
npm install && \
npm run production
ENTRYPOINT ["/bin/init_container.sh"]
The image run contains an installed npm. Despite this fact, the npm install return the error: /bin/sh: 1: npm: not found
How is this possible? What am I doing wrong?
Edit:
As answer to #BMitch 's comment, when I run the RUN image, in the container the node is on the PATH and I can use it. The path is /root/local/bin. I've attached all the Dockerfiles.
I have 3 docker files:
APP
The one you've already seen before.
RUN
FROM php:7.2.5-apache
MAINTAINER Azure App Services Container Images <appsvc-images#microsoft.com>
COPY apache2.conf /bin/
COPY init_container.sh /bin/
RUN a2enmod rewrite expires include deflate
# install the PHP extensions we need
RUN apt-get update \
&& apt-get install -y --no-install-recommends \
libpng-dev \
libjpeg-dev \
libpq-dev \
libldap2-dev \
libldb-dev \
libicu-dev \
libgmp-dev \
mysql-client \
libmagickwand-dev \
openssh-server vim curl wget tcptraceroute \
&& chmod 755 /bin/init_container.sh \
&& echo "root:Docker!" | chpasswd \
&& echo "cd /home" >> /etc/bash.bashrc \
&& ln -s /usr/lib/x86_64-linux-gnu/libldap.so /usr/lib/libldap.so \
&& ln -s /usr/lib/x86_64-linux-gnu/liblber.so /usr/lib/liblber.so \
&& ln -s /usr/include/x86_64-linux-gnu/gmp.h /usr/include/gmp.h \
&& rm -rf /var/lib/apt/lists/* \
&& pecl install imagick-beta \
&& docker-php-ext-configure gd --with-png-dir=/usr --with-jpeg-dir=/usr \
&& docker-php-ext-configure pdo_mysql --with-pdo-mysql=mysqlnd \
&& docker-php-ext-configure mysqli --with-mysqli=mysqlnd \
&& docker-php-ext-install gd \
mysqli \
opcache \
pdo \
pdo_mysql \
pdo_pgsql \
pgsql \
ldap \
intl \
gmp \
zip \
bcmath \
mbstring \
pcntl \
xml \
xmlrpc \
&& docker-php-ext-enable imagick
###################
# Installing node #
###################
RUN apt-get update -yq && apt-get upgrade -yq && \
apt-get install -yq g++ libssl-dev apache2-utils curl git python make nano
# setting up npm for global installation without sudo
# http://stackoverflow.com/a/19379795/580268
RUN MODULES="local" && \
echo prefix = ~/$MODULES >> ~/.npmrc && \
echo "export PATH=\$HOME/$MODULES/bin:\$PATH" >> ~/.bashrc && \
. ~/.bashrc && \
mkdir ~/$MODULES && \
\
# install Node.js and npm
# https://gist.github.com/isaacs/579814#file-node-and-npm-in-30-seconds-sh
mkdir ~/node-latest-install && cd $_ && \
curl http://nodejs.org/dist/v8.11.3/node-v8.11.3.tar.gz | tar xz --strip-components=1 && \
./configure --prefix=~/$MODULES && \
make install && \
curl -L https://www.npmjs.org/install.sh | sh
# optional, check locations and packages are correct
# RUN which node; node -v; which npm; npm -v; \
# npm ls -g --depth=0
# Remove unnecessary packages
# RUN apt-get -yq purge g++ libssl-dev curl git python make nano
# RUN apt-get -yq autoremove
###################
RUN \
rm -f /var/log/apache2/* \
&& rmdir /var/lock/apache2 \
&& rmdir /var/run/apache2 \
&& rmdir /var/log/apache2 \
&& chmod 777 /var/log \
&& chmod 777 /var/run \
&& chmod 777 /var/lock \
&& chmod 777 /bin/init_container.sh \
&& cp /bin/apache2.conf /etc/apache2/apache2.conf \
&& rm -rf /var/www/html \
&& rm -rf /var/log/apache2 \
&& mkdir -p /home/LogFiles \
&& ln -s /home/LogFiles /var/log/apache2
RUN { \
echo 'opcache.memory_consumption=128'; \
echo 'opcache.interned_strings_buffer=8'; \
echo 'opcache.max_accelerated_files=4000'; \
echo 'opcache.revalidate_freq=60'; \
echo 'opcache.fast_shutdown=1'; \
echo 'opcache.enable_cli=1'; \
} > /usr/local/etc/php/conf.d/opcache-recommended.ini
RUN { \
echo 'error_log=/var/log/apache2/php-error.log'; \
echo 'display_errors=Off'; \
echo 'log_errors=On'; \
echo 'display_startup_errors=Off'; \
echo 'date.timezone=UTC'; \
} > /usr/local/etc/php/conf.d/php.ini
COPY sshd_config /etc/ssh/
EXPOSE 2222 8080
ENV APACHE_RUN_USER www-data
ENV PHP_VERSION 7.2.5
ENV PORT 8080
ENV WEBSITE_ROLE_INSTANCE_ID localRoleInstance
ENV WEBSITE_INSTANCE_ID localInstance
ENV PATH ${PATH}:/home/site/wwwroot
ENTRYPOINT ["/bin/init_container.sh"]
BUILD
FROM composer:latest as composer
FROM php:7.2.5-apache as apache
COPY --from=composer /usr/bin/composer /usr/bin/composer
RUN apt-get update && \
apt-get install git zip unzip -y
Edit 2:
It is important that if I remove the RUN npm... commands, then the whole build is a success and the result image contains the npm and I can use it (I've verified by using a container in interactive mode).
Edit 3:
Here's a lot lot simpler solution that can be tried out instantly:
FROM alpine as img1
RUN echo "$HOME" > $HOME/test.txt
FROM alpine as img2
RUN cat $HOME/test.txt
The result is: cat: can't open '/root/test.txt': No such file or directory
Two issues going on here. The "php:7.2.5-apache" image won't have /root/local/bin in the path, and you did not add it to the path during your build. The npm commands will work when you login interactively likely because of some changes to the shell login scripts that setup the environment. You'll need to run these environment setup scripts before running any npm commands, and that must be done within the same RUN command. To verify for yourself, you can check your .bashrc for variables or commands run to setup the npm environment. And you can verify the environment is different by comparing the PATH value with an env command in the interactive shell and in your build, you should see two different outputs if this is your issue. When I ran part of your run image, I saw the following in the .bashrc:
export PATH=$HOME/local/bin:$PATH
So you'll want to update the line in your Dockerfile for the run image:
ENV PATH /root/local/bin:${PATH}:/home/site/wwwroot
Per your edit 3, that's an entirely different issue. You created a file in one new image, and then went back to the base image where the file doesn't exist. If you wanted to see the file in a multi-stage build, then you either need to copy it between the stages, or use the previous image as your "from".
FROM alpine as img1
RUN echo "$HOME" > $HOME/test.txt
FROM alpine as img2
COPY --from=img1 /root/test.txt /root/test.txt
RUN cat $HOME/test.txt
or
FROM alpine as img1
RUN echo "$HOME" > $HOME/test.txt
FROM img1 as img2
RUN cat $HOME/test.txt
I'm trying to install drupal console in docker (under Linux Antergos). I've the following error :
Warning: mkdir(): Permission denied in phar:///usr/local/bin/drupal/vendor/drupal/console-core/src/Utils/ConfigurationManager.php on line 49
Here is my PHP dockerfile :
FROM php:7.0-fpm
RUN usermod -u 1000 www-data
# Set timezone
RUN rm /etc/localtime
RUN ln -s /usr/share/zoneinfo/Europe/Bruxelles /etc/localtime
RUN "date"
RUN apt-get update && apt-get install -y \
git \
unzip \
libfreetype6-dev \
libjpeg62-turbo-dev \
libmcrypt-dev \
libpng12-dev \
mysql-client \
&& docker-php-ext-install -j$(nproc) iconv mcrypt \
&& docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \
&& docker-php-ext-install -j$(nproc) gd \
&& docker-php-ext-install mysqli pdo pdo_mysql mcrypt zip mbstring opcache json
# Install Xdebug / Redis
RUN pecl install redis \
&& pecl install xdebug \
&& docker-php-ext-enable redis xdebug
# Set the Drush version.
ENV DRUSH_VERSION 8.1.2
# Install Drush 8 with the phar file.
RUN curl -fsSL -o /usr/local/bin/drush "https://github.com/drush-ops/drush/releases/download/$DRUSH_VERSION/drush.phar" && \
chmod +x /usr/local/bin/drush
# Download console.
RUN curl https://drupalconsole.com/installer -L -o drupal.phar
# Install console.
RUN mv drupal.phar /usr/local/bin/drupal && \
chmod +x /usr/local/bin/drupal && \
drupal init --override
# Create drush-backups dir
RUN mkdir /var/www/drush-backups/
USER 1000
WORKDIR /var/www/html
To solve the problem I had to install Drupal Console by composer. There is certainly another solution, but it's work with it.