I am on Windows 10 and I have WSL2 enabled. When I do docker pull ubuntu followed by docker run ubuntu, a new ubuntu container with a randomly generated name shows up in my dashboard and it starts for half a second, but then immediately stops. If I press the start button the same behaviour is observed. I tried running these commands from Command Prompt, PowerShell, and my downloaded Ubuntu 18.04 distro (which is also my default WSL2 distro) all with the same result.
How do I fix this?
Also, docker logs <container_name> doesn't result in anything and double-clicking the container name in the dashboard doesn't show any logs.
A docker container exits when its main process finishes its execution. Now when you check Dockerfile of Ubuntu image you can see the
CMD ["/bin/bash"] which get execute when we start the container.
so if you need to run the container in the background you can do
docker run -id --name=myubuntu ubuntu
Or you can directly launch the container with an interactive shell using
docker run -it --name=myubuntu ubuntu /bin/bash
$ docker run -d ubuntu bash -c "tail -f /dev/null"
8181cb08da63e8c2b43696155088f1a7da58023d426f11dbc52ec4867a2f5bdf
Using a command that hangs (e.g tail -f /dev/null) ensures that the container won't close early.
You can then enter the container using
$ docker exec -it 8181cb08da63e8c2b43696155088f1a7da58023d426f11dbc52ec4867a2f5bdf /bin/bash
To make it easier you could name the container by using the --name flag
$ docker run -d --name=myubuntu ubuntu bash -c "tail -f /dev/null"
fd534285934a6d62e6955ee330134e342d97a6900f4531f5ee60f729d4c6d43d
Then enter the container using
$ docker exec -it myubuntu /bin/bash
Why when i run the command
docker run ubuntu
without option '-it' is not possible to interact with the created container even when running command start with the -a -i options
docker start -a -i CONTAINER_ID
or when i run
docker start CONTAINER_ID
simply the container has the status "Exit (0) 4 seconds ago"
But when i run
docker run -it ubuntu
i can use bash shell of ubuntu using 'docker start -a -i'
When you run docker run without -it it's still running the container but you've not given it a command, so it finishes and exits.
If you try:
docker run ubuntu /bin/bash -c "echo 'hello'";
It'll run ubunu, then the command, and then finish because there is no reason for it to be kept alive afterwards.
-i is saying keep it alive and work within in the terminal (allow it to be interactive), but if you type exit, you're done and the container stops.
-t is showing the terminal of within the docker container (see: What are pseudo terminals (pty/tty)?)
-it allows you to see the terminal in the docker instance and interact with it.
Additionally you can use -d to run it in the background and then get to it afterwards.
Ex:
docker run -it -d --name mydocker ubuntu;
docker exec -it mydocker /bin/bash;
TLDR is -it allows you connect a terminal to interactively connect to the container.
If you run docker run --help, you can find the details about docker run options.
$ docker run --help
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
...
-i, --interactive Keep STDIN open even if not attached
...
-t, --tty Allocate a pseudo-TTY
I'm studying the Docker documentation, but I'm having a hard time understanding the concept of creating a container, ssh, and ssh back.
I created a container with
docker run -ti ubuntu /bin/bash
Then, it starts the container and I can run commands. docker ps gives me
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
0e37da213a37 ubuntu "/bin/bash" About a minute ago Up About a minute keen_sammet
The issue is after I exit the container I can't ssh back.
I tried docker attach that gives me Error: No such container and I tried docker exec -ti <container>/bin/bash that gives me the same message Error: No such container
How do I run and ssh back to the container?
When you exit the bash process, the container exits (in general, a container will exit when the foreground process exits). The error message you are seeing is accurately describing the situation (the container is no longer running).
If you want to be able to docker exec into a container, you will want to run some sort of persistent command. For example, if you were to run:
docker run -ti -d --name mycontainer ubuntu bash
This would start a "detached" container. That means you've started bash, but it's just hanging around doing nothing. You could use docker exec to start a new process in this container:
$ docker exec -it mycontainer ps -fe
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 16:28 pts/0 00:00:00 bash
root 17 0 0 16:28 pts/1 00:00:00 ps -fe
Or:
$ docker exec -it mycontainer bash
There's really no reason to start bash as the main process in this case, since you're not interacting with it. You can just as easily run...
docker run -ti -d --name mycontainer ubuntu sleep inf
...and the behavior would be the same.
The most common use case for all of this is when your docker run command starts up some sort of persistent service (like a web server, or a database server, etc), and then you use docker exec to perform diagnostic or maintenance tasks.
The docker attach command will re-connect you with the primary console of a detached container. In other words, if we return to the initial example:
docker run -ti -d --name mycontainer ubuntu bash
You could connect to that bash process (instead of starting a new one) by running:
docker attach mycontainer
At this point, exit would cause the container to exit.
First, you don't ssh to a docker container (unless you have a sshd process in that container). But you can execute a command with docker exec -ti mycontainer bash -l
But you can exec a command only on running container. If the container exited already you must use another approach : create an image from the container and run a new one.
Here is an example. First I create a container and create a file within then I exit it.
$ docker run -ti debian:9-slim bash -l
root#09f889e80153:/# echo aaaaaaaaaa > /zzz
root#09f889e80153:/# cat /zzz
aaaaaaaaaa
root#09f889e80153:/# exit
logout
As you can see the container is exited (Exited (0) 24 seconds ago)
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
09f889e80153 debian:9-slim "bash -l" 45 seconds ago Exited (0) 24 seconds ago thirsty_hodgkin
So I create a new image with docker commit
$ docker commit 09f889e80153 bla
sha256:6ceb88470326d2da4741099c144a11a00e7eb1f86310cfa745e8d3441ac9639e
So I can run a new container that contains previous container content.
$ docker run -ti bla bash -l
root#479a0af3d197:/# cat zzz
aaaaaaaaaa
I created a container using the command
docker run ubuntu /bin/bash -c "echo 'cool content' > /tmp/cool-file"
Now I see the container has exited
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9e5017aef3f9 ubuntu "/bin/bash -c 'echo '" 38 seconds ago Exited (0) 36 seconds ago elegant_euler
Question: How can I restart and get in to the interactive mode for this container using its container-id?
I cannot use docker run -it <image_name> since this expects image name and not container id.
I tried using docker attach , but I think this only works for running containers.
I don't want to commit this container just yet so, how can I restart and get in to interactive mode for this container using it's container-id?
EDIT: I'm able to get in to other containers using docker start {container-id} and then running docker attach {container-id}. I wonder if there is something peculiar with the way I created the container which would result in this behavior. I'm just starting out with docker so do direct me in right direction if I'm missing some basic bit.
A container exits when it completes its command. So the container started with
docker run ubuntu /bin/bash -c "echo 'cool content' > /tmp/cool-file"
will exit as soon as the command echo is completed. In this case it doesn't make sense to restart that container.
If you run a new container in detached mode you'll be able to keep it live and to attach it in a second time.
So, in your case you should run a new container from the image in detached mode running a command like /bin/bash , then you can run the echo and attach it
docker run -d -ti ubuntu /bin/bash
docker exec -ti <containerId> /bin/bash -c "echo 'cool content' > /tmp/cool-file"
The container will be kept alive, so you can exec more commands on it, e.g.
docker exec -ti /bin/bash -c "cat /tmp/cool-file"
or run a new /bin/bash to "attach" your container and to work in it as a command prompt
docker exec -ti <containerId> /bin/bash
root#<containerId>:/# cat /tmp/cool-file
cool content
You can succesfully stop / start /restart this container
docker stop <containerId> && docker start <containerId>
or
docker restart <containerId>
Remind that when you restart a container it executes again its original command. So if you would able to restart the container of your use case (but you dont't) it would run again /bin/bash -c "cat /tmp/cool-file"
Restarting a container that run with command /bin/bash , it will run again the same command when restarting.
You normally can't change the command to RUN when restarting an existing container; to do it you can try some tricks as suggested at How to start a stopped docker container with a different command.
i tried myself:
docker restart <container_id>
docker exec -it <container_id> bash
works both perfect to restart and get into interactive terminal.
Check Docker start command
docker stop {containerId} && docker start -i {containerId}
I created a container with -d so it's not interactive.
docker run -d shykes/pybuilder bin/bash
I see that the container has exited:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d6c45e8cc5f0 shykes/pybuilder:latest "bin/bash" 41 minutes ago Exited (0) 2 seconds ago clever_bardeen
Now I would like to run occasional commands on the machine and exit. Just to get the response.
I tried to start the machine. I tried attaching. I thought I could call run with a container, but that does not seem to be allowed. Using start just seems to run and then exist quickly.
I'd like to get back into interactive mode after exiting.
I tried:
docker attach d6c45e8cc5f0
But I get:
2014/10/01 22:33:34 You cannot attach to a stopped container, start it first
But if I start it, it exits anyway. Catch 22. I can't win.
In October 2014 the Docker team introduced docker exec command: https://docs.docker.com/engine/reference/commandline/exec/
So now you can run any command in a running container just knowing its ID (or name):
docker exec -it <container_id_or_name> echo "Hello from container!"
Note that exec command works only on already running container. If the container is currently stopped, you need to first run it with the following command:
docker run -it -d shykes/pybuilder /bin/bash
The most important thing here is the -d option, which stands for detached. It means that the command you initially provided to the container (/bin/bash) will be run in the background and the container will not stop immediately.
Your container will exit as the command you gave it will end. Use the following options to keep it live:
-i Keep STDIN open even if not attached.
-t Allocate a pseudo-TTY.
So your new run command is:
docker run -it -d shykes/pybuilder bin/bash
If you would like to attach to an already running container:
docker exec -it CONTAINER_ID /bin/bash
In these examples /bin/bash is used as the command.
So I think the answer is simpler than many misleading answers above.
To start an existing container which is stopped
docker start <container-name/ID>
To stop a running container
docker stop <container-name/ID>
Then to login to the interactive shell of a container
docker exec -it <container-name/ID> bash
To start an existing container and attach to it in one command
docker start -ai <container-name/ID>
Beware, this will stop the container on exit. But in general, you need to start the container, attach and stop it after you are done.
To expand on katrmr's answer, if the container is stopped and can't be started due to an error, you'll need to commit it to an image. Then you can launch bash in the new image:
docker commit [CONTAINER_ID] temporary_image
docker run --entrypoint=bash -it temporary_image
Some of the answers here are misleading because they concern containers that are running, not stopped.
Sven Dowideit explained on the Docker forum that containers are bound to their process (and Docker can't change the process of a stopped container, seemingly due at least to its internal structure: https://github.com/docker/docker/issues/1437). So, basically the only option is to commit the container to an image and run it with a different command.
See https://forums.docker.com/t/run-command-in-stopped-container/343
(I believe the "ENTRYPOINT with arguments" approach wouldn't work either, since you still wouldn't be able to change the arguments to a stopped container.)
I had to use bash -c to run my command:
docker exec -it CONTAINER_ID bash -c "mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql mysql"
Creating a container and sending commands to it, one by one:
docker create --name=my_new_container -it ubuntu
docker start my_new_container
// ps -a says 'Up X seconds'
docker exec my_new_container /path/to/my/command
// ps -a still says 'Up X+Y seconds'
docker exec my_new_container /path/to/another/command
If you are trying to run shell script, you need run it as bash.
docker exec -it containerid bash -c /path/to/your/script.sh
This is a combined answer I made up using the CDR LDN answer above and the answer I found here.
The following example starts an Arch Linux container from an image, and then installs git on that container using the pacman tool:
sudo docker run -it -d archlinux /bin/bash
sudo docker ps -l
sudo docker exec -it [container_ID] script /dev/null -c "pacman -S git --noconfirm"
That is all.
Pipe a command to docker exec bash stdin
Must remove the -t for it to work:
echo 'touch myfile' | docker exec -i CONTAINER_NAME bash
This can be more convenient that using CLI options sometimes.
Tested with:
docker run --name ub16 -it ubuntu:16.04 bash
then on another shell:
echo 'touch myfile' | docker exec -i ub16 bash
Then on first shell:
ls -l myfile
Tested on Docker 1.13.1, Ubuntu 16.04 host.
I would like to note that the top answer is a little misleading.
The issue with executing docker run is that a new container is created every time. However, there are cases where we would like to revisit old containers or not take up space with new containers.
(Given clever_bardeen is the name of the container created...)
In OP's case, make sure the docker image is first running by executing the following command:
docker start clever_bardeen
Then, execute the docker container using the following command:
docker exec -it clever_bardeen /bin/bash
I usually use this:
docker exec -it my-container-name bash
to continuously interact with a running container.
Assuming the image is using the default entrypoint /bin/sh -c, running /bin/bash will exit immediately in daemon mode (-d). If you want this container to run an interactive shell, use -it instead of -d. If you want to execute arbitrary commands in a container usually executing another process, you might want to try nsenter or nsinit. Have a look at https://blog.codecentric.de/en/2014/07/enter-docker-container/ for the details.
Unfortunately it is impossible to override ENTRYPOINT with arguments with docker run --entrypoint to achieve this goal.
Note: you can override the ENTRYPOINT setting using --entrypoint, but
this can only set the binary to exec (no sh -c will be used).
For Mac:
$ docker exec -it <container-name> sh
if you want to connect as root user:
$ docker exec -u 0 -it <container-name> sh
Simple answer: start and attach at the same time. In this case you are doing exactly what you asked for.
docker start <CONTAINER_ID/CONTAINER_NAME> && docker attach <CONTAINER_ID/CONTAINER_NAME>
make sure to change <CONTAINER_ID/CONTAINER_NAME>
I am running windows container and I need to look inside the docker container for files and folder created and copied.
In order to do that I used following docker entrypoint command to get the command prompt running inside the container or attach to the container.
ENTRYPOINT ["C:\\Windows\\System32\\cmd.exe", "-D", "FOREGROUND"]
That helped me both to the command prompt attach to container and to keep the container a live. :)
# docker exec -d container_id command
Ex:
# docker exec -d xcdefrdtt service jira stop
A quick way to resume and access the most recently exited container:
docker start -a -i `docker ps -q -l`
An easy solution that solved a similar problem for me:
docker run --interactive --tty <name_of_image>