I am running Docker for Mac. When I run
docker run -d --rm --name nginx -p 80:80 nginx:1.10.3
I can access Nginx on port 80 on my Mac. When I run
docker run -d --rm --name nginx --network host -p 80:80 nginx:1.10.3
I can not.
Is it possible to use both "--network host" and publish a port so that it is reachable from my Mac?
Alternatively, can I access Nginx from my Mac via the IP of the HyperKit VM?
Without the --network flag the container is added to the bridge network by default; which creates a network stack on the Docker bridge (usually the veth interface).
If you specify --network host the container gets added to the Docker host network stack. Note the container will share the networking namespace of the host, and thus all its security implications.
Which means you don't need to add -p 80:80, instead run...
docker run -d --rm --name nginx --network host nginx:1.10.3
and access the container on http://127.0.0.1
The following link will help answer the HyperKit question and the current limitations:
https://docs.docker.com/docker-for-mac/networking/
There is no docker0 bridge on macOS
Because of the way networking is implemented in Docker for Mac, you
cannot see a docker0 interface in macOS. This interface is actually
within HyperKit.
Related
I am writing a simple nodejs container to forward requests on localhost to a port, the container exposes port 4433
docker build . -t myproxy
when i run the container by publishing ports like
docker run --rm -p 4433:4433 myproxy
I am able to access my server through http://localhost:4433 as expected but if i try to run the container with --network host i.e
docker run --rm --net host myproxy
I cannot access the container and get site cannot be reached error.
why is container not binding to my host network?
if i provide both options i.e.
docker run --rm --net host -p 4433:4433 myproxy
then i do get warning on console that
WARNING: Published ports are discarded when using host network mode which means it does recognize that i am trying to use host network.
OS: MAC
From the Docker docs:
The host networking driver only works on Linux hosts, and is not supported on Docker Desktop for Mac, Docker Desktop for Windows, or Docker EE for Windows Server.
I have 3 docker applications(containers) in which one container is communicating with other 2 containers. If I run that containers using below command, container 3 is able to access the container 1 and container 2.
docker run -d --network="host" --env-file container1.txt -p 8001:8080 img1:latest
docker run -d --network="host" --env-file container2.txt -p 8080:8080 img2:latest
docker run -d --network="host" --env-file container3.txt -p 8000:8080 img3:latest
But this is working only with host network if I remove this --network="host" option then I am not able to access this application outside(on web browser). In order to access it outside i need to make the host port and container ports same as below.
docker run -d --env-file container1.txt -p 8001:8001 img1:latest
docker run -d --env-file container2.txt -p 8080:8080 img2:latest
docker run -d --env-file container3.txt -p 8000:8000 img3:latest
With this above commands i am able to access my application on web browser but container 3 is not able to communicate with container 1. here container 3 can access the container 2 because there i am exposing 8080 host + container port. But i can't expose again 8080 host port for container 3.
How to resolve this issue??
At last my goal is this application should be accessible on browser without using host network, it should use the bridge network . And container 3 needs to communicate with container 1 & 2.
On user-defined networks, containers can not only communicate by IP address but can also resolve a container name to an IP address. This capability is called automatic service discovery.
Read this for more details on Docker container networking.
You can perform the following steps to achieve the desired result.
Create a private bridge network.
docker network create --driver bridge privet-net
Now start your application containers along with the --network private-net added to your docker run command.
docker run -d --env-file container1.txt -p 8001:8001 --network private-net img1:latest
docker run -d --env-file container2.txt -p 8080:8080 --network private-net img2:latest
docker run -d --env-file container3.txt -p 8000:8000 --network private-net img3:latest
With this way, all the three containers will be able to communicate with each other and also to the internet.
In this case when you are using --network=host, then you are telling docker to not isolate the network rather to use the host's network. So all the containers are on the same network, hence can communicate with each other without any issues. However when you remove --newtork=host, then docker will isolate the network as well there by restricting container 3 to communicate with container 1.
You will need some sort of orchestration service like docker compose, docker swarm etc.
I'm having a rather awful issue with running a Redis container. For some reason, even though I have attempted to bind the port and what have you, it won't expose the Redis port it claims to expose (6379). Obviously, I've checked this by scanning the open ports on the IP assigned to the Redis container (172.17.0.3) and it returned no open ports whatsoever. How might I resolve this issue?
Docker Redis Page (for reference to where I pulled the image from): https://hub.docker.com/_/redis/
The command variations I have tried:
docker run --name ausbot-ranksync-redis -p 127.0.0.1:6379:6379 -d redis
docker run --name ausbot-ranksync-redis -p 6379:6379 -d redis
docker run --name ausbot-ranksync-redis -d redis
docker run --name ausbot-ranksync-redis --expose=6379 -d redis
https://gyazo.com/991eb379f66eaa434ad44c5d92721b55 (The last container I scan is a MariaDB container)
The command variations I have tried:
docker run --name ausbot-ranksync-redis -p 127.0.0.1:6379:6379 -d redis
docker run --name ausbot-ranksync-redis -p 6379:6379 -d redis
Those two should work and make the port available on your host.
Obviously, I've checked this by scanning the open ports on the IP assigned to the Redis container (172.17.0.3) and it returned no open ports whatsoever. How might I resolve this issue?
You shouldn't be checking the ports directly on the container from outside of docker. If you want to access the container from the host or outside, you publish the port (as done above), and then access the port on the host IP (or 127.0.0.1 on the host in your first example).
For docker networking, you need to run your application listening on all interfaces (not localhost/loopback). The official redis image already does this, and you can verify with:
docker run --rm --net container:ausbot-ranksync-redis nicolaka/netshoot netstat -lnt
or
docker run --rm --net container:ausbot-ranksync-redis nicolaka/netshoot ss -lnt
To access the container from outside of docker, you need to publish the port (docker run -p ... or ports in the docker-compose.yml). Then you connect to the host IP and the published port.
To access the container from inside of docker, you create a shared network, run your containers there, and access using docker's DNS and the container port (publish and expose are not needed for this):
docker network create app
docker run --name ausbot-ranksync-redis --net app -d redis
docker run --name redis-cli --rm --net app redis redis-cli -h ausbot-ranksync-redis ping
I am really confused about this problem. I have two computer in our internal network. Both computers can ping internal servers.
Both computers have same docker version.
I run simple docker container with docker run -it --rm --name cont1 --net=host java:8 command on both computers. Then ssh into containers and try to ping internal server. One of the container can ping an internal server but other one can't reach any internal server.
How it can be possible? Do you have any idea about that?
Thank you
connect container to other systems in the same network is done by port mapping .
for that you need to run docker container with port mapping.
like - docker run -it --rm --name cont1 -p host_ip:host_port:container_port java:8
e.g., docker run -it --rm --name cont1 -p 192.168.134.122:1234:1500 java:8
NOTE : container port given in docker run is exposed in Dockerfile
now for example container ip will be - 172.17.0.2 port given in run is :1500
Now the request send to host_ip(192.168.134.122) and host_port(1234) is redirect to container with ip (172.17.0.2) and port (1500).
See the binding details in iptables -L -n -t nat
Thanks
Ok, I am pretty new to Docker world. So this might be a very basic question.
I have a container running in Docker, which is running RabbitMQ. Let's say the name of this container is "Rabbit-container".
RabbitMQ container was started with this command:
docker run -d -t -i --name rmq -p 5672:5672 rabbitmq:3-management
Python script command with 2 args:
python ~/Documents/myscripts/migrate_data.py amqp://rabbit:5672/ ~/Documents/queue/
Now, I am running a Python script from my host machine, which is creating some messages. I want to send these messages to my "Rabbit-container". Hence I want to connect to this container from my host machine (Mac OSX).
Is this even possible? If yes, how?
Please let me know if more details are needed.
So, I solved it by simply mapping the RMQ listening port to host OS:
docker run -d -t -i --name rmq -p 15672:15672 -p 5672:5672 rabbitmq:3-management
I previously had only -p 15672:15672 in my command. This is mapping the Admin UI from Docker container to my host OS. I added -p 5672:5672, which mapped RabbitMQ listening port from Docker container to host OS.
If you're running this container in your local OSX system then you should find your default docker-machine ip address by running:
docker-machine ip default
Then you can change your python script to point to that address and mapped port on <your_docker_machine_ip>:5672.
That happens because docker runs in a virtualization engine on OSX and Windows, so when you map a port to the host, you're actually mapping it to the virtual machine.
You'd need to run the container with port 5672 exposed, perhaps 15672 as well if you want WebUI, and 5671 if you use SSL, or any other port for which you add tcp listener in rabbitmq.
It would be also easier if you had a specific IP and a host name for the rabbitmq container. To do this, you'd need to create your own docker network
docker network create --subnet=172.18.0.0/16 mynet123
After that start the container like so
docker run -d --net mynet123--ip 172.18.0.11 --hostname rmq1 --name rmq_container_name -p 15673:15672 rabbitmq:3-management
note that with rabbitmq:3-management image the port 5672 is (well, was when I used it) already exposed so no need to do that. --name is for container name, and --hostname obviously for host name.
So now, from your host you can connect to rmq1 rabbitmq server.
You said that you have never used docker-machine before, so i assume you are using the Docker Beta for Mac (you should see the docker-icon in the menu bar at the top).
Your docker run command for rabbit is correct. If you now want to connect to rabbit, you have two options:
Wrap your python script in a new container and link it to rabbit:
docker run -it --rm --name migration --link rmq:rabbit -v ~/Documents/myscripts:/app -w /app python:3 python migrate_data.py
Note that we have to link rmq:rabbit, because you name your container rmq but use rabbit in the script.
Execute your python script on your host machine and use localhost:5672
python ~/Documents/myscripts/migrate_data.py amqp://localhost:5672/ ~/Documents/queue/