I have this image and I trying to paint the third line from left
and fourth line for up
for output this
how I could do this ;please help me
More or less like this - you can do the exact numbers :-)
convert frame.png -fill red -draw "line 305,80 1180,80" -draw "line 305,80 305,435" result.png
Related
I am using ImageMagick to add text to an image. I used to -gravity Center flag to put the text in the center of the image. But I think this is resulting in the text being center aligned too. I want the text at the center of the image but left aligned. Here is an example of what I'm trying to have:
This is the output I'm getting:
Current output
This is what I want:
This is my requirement
How do I accomplish this? This is my first time using ImageMagick. Please guide me.
Here is one way to do that in Imagemagick 6. I specify the background color, the font color (fill), the font and the pint-size and gravity west (left side). I use label: to create the two lines of text with a new line between them. This creates a text image of the size needed to hold the text. Then I pad the image all around that to the final size with the text image in its center using the same background color.
convert -background black -fill white -font ubuntu -pointsize 28 -gravity west label:"This is line 1 of text\nThis is line 2 of text" -gravity center -extent 400x300 result.png
See
https://imagemagick.org/Usage/text/
https://imagemagick.org/Usage/crop/#extent
ADDITION
If you want to put the text over an existing image, then you do something similar, but in place of the extent, we composite the text image over the background image.
The following is Unix syntax. For Window, remove the backslashes \ before the parentheses.
Input:
convert lena.png \( -background black -fill white -font ubuntu -pointsize 21 -gravity west label:"This is line 1 of text\nThis is line 2 of text" \) -gravity center -compose over -composite result.png
Result:
Or if you do not want the black background, use "none" for the color.
convert lena.png \( -background none -fill white -font ubuntu -pointsize 21 -gravity west label:"This is line 1 of text\nThis is line 2 of text" \) -gravity center -compose over -composite result2.png
I am using imagemagick to draw a border on the top of an image.
THIS IS MY CODE:
convert source.jpg -stroke red -strokewidth 2 -fill transparent -draw \"roundrectangle 10,10 628,151 10,10\" source.jpg
This works fine but i need to be able to position the -draw where i want.
I tried to position the border like using -geometry like so:
convert source.jpg -stroke red -strokewidth 2 -fill transparent -geometry +5+15 -draw \"roundrectangle 10,10 628,151 10,10\" source.jpg
But this does not position it where i want. I also tried using -gravity and that doesn't work either!
Could someone please advise on this?
Thanks in advance.
Bonzo is correct, you cannot use -geometry with -draw.
In ImageMagick with -draw you can also translate to where you want the center to be and then specify +- distances to the corners from the center placement.
Suppose you have a 100x100 size box you want draw and you want it centered at 250,250, then
convert input.jpg -stroke red -strokewidth 2 -fill transparent -draw "translate 250,250 roundrectangle -50,-50 50,50 10,10" output.png
That makes it easier to draw the same size boxes at different locations.
see
http://www.imagemagick.org/Usage/draw/
http://www.imagemagick.org/script/magick-vector-graphics.php
Here is my code:
#! /usr/bin/env sh
# Generate test image.
convert -size 100x60 xc:blue -fill blue -stroke black -draw "circle 50,30 55,55" in.png
# Make background transparent.
convert in.png -fill none -draw 'matte 0,0 floodfill' -flop -draw 'matte 0,0 floodfill' -flop out.png
# Replace transparent background with green.
mogrify -background green -flatten out.png
# The wrong way.
convert in.png -transparent blue oops.png
mogrify -background green -flatten oops.png
It is based on this snippet: https://snippets.aktagon.com/snippets/558-how-to-remove-a-background-with-imagemagick
Starting with this:
I want to get this:
Not this:
Can I achieve this with a single convert command instead of a convert followed by a mogrify?
I am using ImageMagick 6.8.9-9.
Essentially, you are seeking a "floodfill", like this:
convert in.png -fill green -draw 'color 0,0 floodfill' result.png
That will look at the top-left pixel (0,0) and fill all similarly coloured pixels which are connected to it with green. If your background has slight variations in it, e.g. it's a JPEG, add some fuzz factor
convert in.jpg -fuzz 25% ...
Note that if your circle had touched the top and bottom edges, it would prevent the fill from flooding around to the right side of the diagram. So, let's say you had created your circle like this:
convert -size 100x60 xc:blue -fill blue -stroke black -draw "circle 50,30 50,0" in.png
And then you run the above command, you will get:
If that happens, you can add a single pixel wide border all the way around for the colour to "flow" through first, then flood-fill, and finally remove it later:
convert in.png -bordercolor blue -border 1 -fill green -draw 'color 0,0 floodfill' -shave 1x1 result.png
I wrote this script and it's working fine, but I would like to do all of it in one step on the fly, without the extra temp image.
explanation: i have a lot of broken image files and i want to draw a circle underneath each image. for this i have to create a temporary image circle.png and then use "image DstOver" to place it below each of the images:
convert -size 200x200 xc:transparent -fill red -draw 'translate 100,100 circle 0,0 100,0' circle.png
mogrify -draw "image DstOver 0,0 0,0 'circle.png'" images/*.png
Something along the lines of:
mogrify -fill red -draw "DstOver translate 100,100 circle 0,0 100,0" images/*.png
But this is always giving me an error, no matter where i place the DstOver:
mogrify: non-conforming drawing primitive definition `DstOver' # error/draw.c/DrawImage/3169.
Composition operators like "DstOver" are only used with the "image" primitive of "-draw". Just omit it. See the "-draw" entry in the ImageMagick commandline documentation.
You can have multiple "-draw " options, some drawing figures such as "circle ..." and others such as "image DstOver ...".
I am not sure what you are trying to do, but in general, mogrify will have trouble doing anything with multi-image operators or stack operators. The only exception I know of is the -draw image operator, so you need to create your image up-front and then use that:
# Blue rectangle with transparent centre
convert -size 200x200 xc:none -bordercolor blue -border 50 start.png
# Your circle
convert -size 200x200 xc:white -fill red -draw 'translate 100,100 circle 0,0 100,0' circle.png
# Now underlay
mogrify -draw "image DstOver 0,0 0,0 'circle.png'" start.png
I'm using ImageMagick ver 6.9.3-7 to write text over pictures. I've noticed that the same text with the same font looks much better in html canvas and I'm trying to make it looks the same.
This is how it looks in the html5 canvas:
and this is how it's looks with IM:
(enlarge the images to view the different)
This is how I'm creating the image with node.js:
gmFrame
.font("./assets/impact.ttf", fontSize)
.stroke("#000")
.strokeWidth(8)
.draw(`gravity center text ${position.x},${position.y} '${text}'`)
.stroke("transparent")
.fill("#fff")
.draw(`gravity center text ${position.x},${position.y} '${text}'`);
Is there something to do about it?
After investigating the only way to do it is with blur.
This is an example for how to add text with blur without writing another file
convert -quality 100 "DJ Pauly D.jpg" -resize 500x500 \( +clone -alpha transparent -pointsize 52 -font impact -stroke "#000" -strokewidth 8 -draw "gravity center text 0,0 'WRITE SOMETHING'" -stroke "transparent" -fill "#fff" -draw "gravity center text 0,0 'WRITE SOMETHING'" -blur 0x5 \) -composite r2.png