I'm getting an error while running bundle install on digitalocean. I've put the error's in a pastebin here;
http://pastebin.com/wzFCFYYE
Thank you.
Looks similar to Bundle install: ERROR: Failed to build gem native extension. nio4r gem
You probably don't have installed on DigitalOcean some libraries... from the marked as correct answer... probably you need only
sudo apt-get install libev-dev
Before install the gem
Lets try
`sudo gem install nio4r -v '1.2.1'`
Might be this command will help you -
gem install nio4r -v '1.2.1'
if this command is not working then follow the below steps to fixing this issue like -
Try to install nio4r with different version so remove/change version from Gem file. If still getting some issue then remove Gemlock file and run bundle install.
Might be above solution will help you.
Related
I am still fairly new to Rails. I am trying to push to Heroku and I am getting errors.
The first error is when I run a Bundle Install I get this error message:
"An error occurred while installing pg (1.1.3), and Bundler cannot continue.
Make sure that gem install pg -v '1.1.3' succeeds before bundling."
I have tried to run this command
gem install pg -v '1.1.3'
But it fails and gives me this error message:
"ERROR: Error installing pg:
ERROR: Failed to build gem native extension."
Does anyone have a solution to this?
I had the exact same problem, and solved it by running sudo apt install postgresql-contrib libpq-dev. Then bundle worked just fine.
if you're using OSX, you could try running
brew install postgresql
and then installing the gem
TL;DR; If you installed the Postgres using the PostgresAPP instead of BREW then the problem might be that you don't have the postgres bin folder in the $APTH
The solution is to find the Posgres app installation folder an in it the /bin folder.
In my case if I run which postgres doesn't work which means I don't have it in my $PATH, so what I did is I navigated to: cd /Applications/Posgres.app then to Contents and then to Versions until I found the latest folder:
/Applications/Postgres.app/Contents/Versions/latest/bin
Now, with this I can install the PG GEM by providing the path to the bin folder of my Postgres app installation
Finally, in the terminal in the root of my Rails project I ran where I provide the postgres config file path to the GEM installer:
gem install pg -v '1.2.3' -- --with-pg-config=/Applications/Postgres.app/Contents/Versions/latest/bin/pg_config
I encountered the same problem. I am using Ubuntu. I installed Postgres using this Ubuntu guide. After installing Postgres, I ran this code sudo apt install postgresql-contrib libpq-dev then bundle install.
The accepted answer is not correct. If you installed postgresql-contrib and libpq-dev as mentioned in Cesar Faria answer, and you still getting the same error, most probable you missed the list of packages which are considered essential for building Debian packages. All that packages included in build-essential package. So, all you need to do to get rid of the error is the command below.
sudo apt install libpq-dev build-essential
try instaling with pg-config like this:
gem install pg -v 1.1.3 -- --with-pg-config=/usr/pgsql-9.X/bin/pg_config.
In pg-config path mention the posgtres version installed in you're system.
Postgresql needs to be in local in order to install gem pg. Try this
brew install postgresql
and the re-install bundle
bundle install
or
If you are using yum. Try this
sudo yum install postgresql-devel
The following is only for your local environment:
Note: Update the command below to match your version postgresql/13.2/...
> brew install postgres
> sudo gem install pg -v '1.1.4' --source 'https://rubygems.org/' -- --with-pg-config=/usr/local/Cellar/postgresql/13.2/bin/pg_config
Also, make sure to start your server > pg_ctl -D /usr/local/var/postgres start
Upon trying to start a new Rails App on Linux, I am receiving this error:
I am a newbie to this software. Please help!
Thanks :)
My Error
UPDATE: I ran 'sudo gem install bundler', and it worked but now received this error!
'/usr/bin/ruby2.3: No such file or directory -- /usr/bin/bundle (LoadError)'
My new error
It seems like you dont have bundler gem installed.
Try:
gem install bundler
Bundler is missing.
Try the below commands.
[sudo] gem install bundler
bundle install
Try stop using sudo in your commands. According to your new capture, you are using sudo with gem install bundler, and maybe that is conflicting with your configuration.
Take this link for reference for sudo usage with gem
https://stackoverflow.com/a/2119413/4870465
I get the following error when attempting to run cap production deploy.
DEBUG [dc362284] Bundler::GemNotFound: Could not find json-1.8.1.gem for installation
DEBUG [dc362284] An error occurred while installing json (1.8.1), and Bundler cannot continue.
DEBUG [dc362284] Make sure that `gem install json -v '1.8.1'` succeeds before bundling.
It may be important to note that this deployment was working, than I upgraded to Ruby 2.1.0 to remove an encoding error. I upgraded locally which worked fine. I ran rvm install 2.1.0 and rvm use 2.1.0 then changed my .ruby-version file to reflect this Ruby upgrade.
The bundle install command works locally, but produces the same above error when I ssh onto the destination server and run this command.
If I run gem list I can see this in the list of gems.
...
jquery-rails (3.0.4)
json (1.8.1)
less (2.3.2)
...
If I try the recommended solution gem install json -v '1.8.1' Locally and on the destination server I get the following output:
Building native extensions. This could take a while...
Successfully installed json-1.8.1
Parsing documentation for json-1.8.1
Done installing documentation for json after 0 seconds
1 gem installed
So it appears the gem is installed, right? Why is this happening? How can I solve this? Any help would be greatly appreciated.
$ bundle update json
$ bundle install
So after a half day on this and almost immediately after posting my question I found the answer. Bundler 1.5.0 has a bug where it doesn't recognize default gems as referenced here
The solution was to update to bundler 1.5.1 using gem install bundler -v '= 1.5.1'
Run this command then everything will be ok
sudo apt-get install libgmp-dev
if you are in MacOS Sierra and your ruby version is 2.4.0.The ruby version is not compatible with json 1.8.3.
You can try add this line in your Gemfile:
gem 'json', github: 'flori/json', branch: 'v1.8'
This works for me!
To solve this problem, simply run:
bundle update
It will update the version of your bundler. Then run:
bundle install
Your problem will get solve. Solution is well explained here.
I found the solution here. There is a problem with json version 1.8.1 and ruby 2.2.3, so install json 1.8.3 version.
gem install json -v1.8.3
You should try
$ sudo gem install json -v '1.8.2'
in my case (Ubuntu 14.04) that didn't work directly and I had to do this:
$ sudo apt-get install ruby-dev
and then I could install the gem and continue. Had one more problem that was fixed by:
$ sudo apt-get install libsqlite3-dev
Hoping helps.
If the recommended answer didn't help because you are already using a newer version of bundler. Try the solution that worked for me.
Delete everything inside your vendor folder.
Add a line to your gemfile
gem 'json', '1.8.0'
Then run - bundle update json.
It seems to be an issue with 1.8.1 so going back to 1.8.0 did the trick for me.
I ran into this error while trying to get a project to run on my local dev box (OSX 10.6), using Sinatra and Postgresql (through activerecord), running on an rvm'd ruby 2.1. I found my answer here: https://github.com/wayneeseguin/rvm/issues/2511
My exact problem (after the first block of log entries):
I also get an error when trying to build native extensions for gems
The answer:
rvm reinstall 2.1.0 --disable-binary
The explanation:
OSX does not have a package manager so all libraries have to be installed manually by user, this makes it virtually impossible to link the binary dynamically, and as you can see there are problems with the (pseudo)statically linked binary.
For the sake of completeness, I had first forgotten to update rvm (rvm get head), which yielded some other errors, but still needed the --disable-binary flag once I had done so.
bundle update json. Helped to get through.
When I tried to install the json gem using gem install json separate from just using bundle install I got ERROR: Failed to build gem native extension., looking that up I found using
apt-get install ruby-dev
did the trick
For OS X make sure you have coreutils
$ brew install coreutils
$ bundle
This appears to be a bug in Bundler not recognizing the default gems installed along with ruby 2.x. I still experienced the problem even with the latest version of bundler (1.5.3).
One solution is to simply delete json-1.8.1.gemspec from the default gemspec directory.
rm ~/.rubies/ruby-2.1.0/lib/ruby/gems/2.1.0/specifications/default/json-1.8.1.gemspec
After doing this, bundler should have no problem locating the gem. Note that I am using chruby. If you're using some other ruby manager, you'll have to update your path accordingly.
I was missing C headers solution was to download it for Xcode, this is the best way.
xcode-select --install
Hope it helps.
Bundle was failing to install json -v '1.8.1' and deleting my Gemfile.lock and running bundle again solved this issue for me.
I installed the latest version of json:
gem install json
Then deleted the line json(1.8.1) from the Gemfile.lock and did a
bundle install
And then the Gemfile.lock file uses json(1.8.3) without erros
Switch ruby version from 1.9 to 2.2 with rvm did the job for me
For me, some of the answers mentioned earlier were helpful from understanding point of view, but those didn't solve my problem.
So this is what I did to solve issue.
Modified gemfile.lock to update json (2.0.2) (Earlier, it was 1.8.3)
Check the Bundler version installed (Bundler -v command). I had version 1.12.5 installed
Install bundler version 1.11.2 (using gem install bundler -v '1.11.2')
Then run bundle install
For macOS Sierra:
I ran into this error When i used bundler(v1.15.3) in Rails(v4.2) project.
The solution for me is gem uninstall bundler -v '1.15.3' and gem install bundler -v '1.14.6'.
I've successfully installed the curb gem on Mac OS X using sudo env ARCHFLAGS="-arch x86_64" gem install curb but when trying to run bundle install I still get this error:
Installing curb (0.7.16) with native extensions
Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension.
I've done some digging and it looks like feedzirra is requiring the gem (it's not listed in the Gemfile). I've tried adding the gem to the Gemfile and pointing it to vendor/gems but that didn't help.
Any help would be greatly appreciated. Also, sorry if there's more clarification needed. This is my first question and I'm fairly new to Ruby on Rails. I'll be glad to provide more details if necessary.
Apparently it needs SSL support for curl, as I had the same error and fixed it with:
sudo apt-get install libcurl4-openssl-dev
You might want to try a standard "gem install curb" to see if that works before "bundle install".
in your Gemfile:
gem 'curb', '= 0.7.16', :path => 'vendor/gems/curb'
As long as that's where you installed the gem to.
As shown in a blog I followed the instructions of setting up SQLite3 on my Windows, but after I pasted the necessary files in Bin folder of Ruby, which I downloaded from http://www.sqlite.org/download.html, I get the following error when I use the following commmands:
C:\gem install sqlite3-ruby --version=1.2.3
ERROR: http://rubygems.org does not appear to be a repository
ERROR: Could not find a valid gem 'sqlite3-ruby' (= 1.2.3) in any repository
Please help me out with this problem and suggest me alternate methods for gem installing SQLite3.
Thanks.
Check that you have the latest version of rubygems: gem -v executed in a command prompt should return 1.3.7. If it does not, you have several options (also explained on rubygems.org):
gem update --system
or
gem install rubygems-update
update_rubygems
Secondly, if you have the correct version and you are on a network with a proxy, you have to tell gem to use that proxy.
There are two ways to do that. First, you could do
gem install sqlite3-ruby -p http://yourproxyserver:port`
or you could define an environment variable
set HTTP_PROXY=http://yourproxyserver:port
and then this setting is saved (and you do not have to specify it explicitly anymore).
Hope this helps.
Try doing this: gem install sqlite3-ruby --version=1.2.3 --source http://gemcutter.org
If that does not work head over to http://gemcutter.org and download the particular version of the gem file, go to the destination to where you copied it to in the command line and install it locally using gem install sqlite3-ruby -l