I am writing a Swift app, and on my main screen I have a long scrollview with several regions of content in it (upcoming events, announcements, and then featured products, and finally some basic info). So it's this really long scroll, and you can swipe down to the bottom.
So visualize 4 boxes, if you will, stacked vertically.
The 3rd box shows featured products. This can be anywhere from 1 to 30 items, depending upon any filters the user has in their settings.
My first try was using a UITableView for region#3 inside of this parent scrollview, but the problem is it only shows the first few items/rows and then the rest you scroll inside the table (which is the default/natural behavior of a table, right?). Unfortunately, the requirement I have is that the inner table can't scroll - it needs to display everything at once and you have to scroll (in the main UIScrollView) to get to the bottom (not scroll inside the inner uitableview scroll). Also, everyone seems to say don't use UITableView inside of a scroll.
So how do I create some sort of list where I create one template (like how you would in a xib/tablecell, and then assign a data source to it, and then repeat down without scrolling? Should I use a tableview after all, and just make the height of it very high and turn scrolling off?
Do I somehow instantiate xibs in a for loop and assign them dynamically to some view?
Thanks so much!
Sounds like you want a Table View with Grouped style. That would make it fairly easy to keep your "4 boxes" segregated, and your "3rd box" would simply be 1 to 30 rows in that section.
On note: you don't want to have a "very tall" table view - or any other type of view, for that matter. You want to allow iOS to manage memory for you, and to load and display only those parts of your content that is visible at any one time.
In other words, use a table view like its designed to be used :)
Related
New to Swift. I am trying to write a recipe-sharing app for fun. One of the features is to let users create a new recipe. On this page, users should be able to give an intro to the recipe to be created, upload an image THEN add a LIST of ingredients dynamically (as we have no idea how many ingredients in total beforehand).
I have created a UIViewController, which includes a UIViewTable, an image view and a "add another ingredient" button. I have created a class for the ingredient. And when the "add" button is pressed, a new "Ingredient" cell will be added to the table. However, I found that adjusting the UIViewTable height dynamically is quite hard.
I want my table to adjust its height according to the number of cells (rows). I haven't found much useful info online.
Or maybe I should've not even used this structure. Instead, just use UITableController (The entire page is a table)? But I got confused that some of the elements (image view, submit a recipe button, recipe-intro textfield etc) will be only created once. Why do I bother making them as prototype cells and add them to my view programmatically?
Thanks in advance!
First of all, welcome to Swift!
You put a few questions together, I will try to answer them one by one. Let's start with the simple stuff.
Don't try to change the height of UITableView based on the number of items. If you want to achieve similar functionality, take a look at UIStackView. Set fixed size for the tableView, ideally with constraints using auto layout.
UITableView is supposed to fill specified space and scroll items inside or show cell on top if there are not enough cells to cover all space.
UITableView is highly optimized to scroll over huge amount of cells as the cells are reused on the background. If you are new to the iOS world, take a look at this function https://developer.apple.com/documentation/uikit/uitableviewcell/1623223-prepareforreuse it can save you hours of debugging (I have been there)
UITableView vs UITableController
UITableController can save you a few lines of code, but using UITableView inside of UIViewController can give you more freedom and save you refactoring if your app is likely to change in the future. There is no specific advantage of UITableController
If you want to provide the extra elements (image view, submit button, text field etc), you can use several methods and this is where the UIViewController with your own UITableView comes in handy.
You can put some buttons, like a plus icon or "Done" button into the navigation bar, as the native Calendar app does.
You can put the static content (intro text field, image view) above the table view (visible always). Use constraints to place the static content on the viewController.view and constraint the table view under your static content. The table view will take less space on the view keeping the space for your content.
Insert your static content as a table view header (will scroll out with the content). Search "HeaderView" here on stack overflow to see how to achieve that.
Place your content over the tableView. If your button is small (rounded), you can place it over the tableView, eg. Twitter uses this for a new tween button.
Hope this answer your questions. Cheers!
I'm currently creating an update of my iOS application and I'm a bit stuck. I've tried to googling around but cannot find a decent answer on this.
I've a menu which links to different views. And I'm not really sure if I've done it the best method.
I've created a view, and added the links into a stack view. Should I considering changing it all to a tableview? or a collection view? Or maybe there's another way?
The current look:
Should I change this to a tableview? collection view? or something else? Or just let it stay as it is?
If the number of items in your menu changes at runtime and is large, you should use a table view, because a table view is good for efficiently displaying a screen's worth of items from a large list of items.
If the contents of your menu is small (under maybe two screenfuls of items) and fixed at compile time and you are using a storyboard, then you could use a table view with static cells, if you can make it look the way you want.
If the contents of your menu is small, then you can use a stack view (inside a scroll view) if that is easier for you. There is no particular advantage to using a table view over a stack view to display a small amount of content, unless you need other features of the table view (like the ability to select/deselect rows).
Based on the screen shot you posted, I'd either use a table view with static cells (since the screen shot is from a storyboard) or a stack view, depending on whether I can get the appearance I want from a table view. If, as in the screen shot, the buttons must be centered vertically, I'd use a stack view, because it's easier to vertically center the content with a stack view.
Look, the fact of have many itens on your screen is clear on the mobile applications, to make it easy, we have collecions view like UITableView and UICollectionView. On the UITableView's case, this implements the scrolling and have methods do handle the operations' list, you can see the documentation to check these methods: https://developer.apple.com/documentation/uikit/uitableview.
Main reasons to use UITableView
Implements scroll behavior.
Independent of size screen you can access all itens.
Easy to detect interactions like tap on cell.
Easy to make changes, like insert and remove content.
The UITableView exists precisely to solve problems like you has.
This question maybe already asked in stackoverflow. But, I did not get any clear idea to my scenario.
I have a viewcontroller (Say, MyViewController).
I have a scrollview(Say, MyScrollView) and I have N number of views (Say MyView1, MyView2, ...) in it.
Those views can be scrolled horizontally. Refer the below image for more clarification.
This image was taken from here.
So, the red area is the scroll view that holds multiple views which are yellow color.
Scenario:
I want to call API's for each view, when the API calling and parsing data occurs, I need to show some loading activity indicator in the views. After successful parsing, I need to update corresponding view with UITableView.
Questions:
In my case, the number of views may vary from 3 to 6. Should I maintain 6 separate UITableViews and UIActivityIndicator's?
I tried with three pointers like left, middle & right to hold reference of tableview and activity indicator. But the problem is, before the first three pages are loading, if the user goes to the fourth view, this system will collapse with so many conditions.
Suggestions needed. Confused!!
I think you have to use UIPageViewController with UITableView. it will solve your problem.
I guess this question is more of a best practice question than a problem solving question.
I would like to have a page on my app that has a UITableView at the bottom of it and some buttons/text above the UITableView but instead of just the UITableView scrolling, I would like the whole page to scroll.
I have been searching around and some people say to put the UITableView inside of a UIScrollView and disable scrolling on it and recalculate the height so the table view is as tall as all of it's rows.
Then I have read some other people say just to put the buttons/text in a Table Row Header and just have that scroll with the whole table view.
Which is the better practice and are either of them frowned upon?
Thanks!
Open the main storyboard and on the bottom right hand side you should see a list of view controllers, buttons, gestures etc.. In that list there should be a controller called "page control" that opts for the page-scroll you are looking for as well as the continuous one which you are trying to get rid of, you can just insertt this in to your basic view controller (via drag and drop). As for the button responsible for the segue (turning the page) you can find that in the list too. I can't explain how to program the button to turn the page step by step as I am typing this on my phone at work right now. If you want I can edit this later in more detail
I am using a standard grouped style UITableView that returns a custom header view for one of it's sections (using the tableView's delegate method viewForHeaderInSection:). The view that is returned for the section header contains a control. It displays an image and is a control so it can tapped to let the user change the image. My desired UI is similar to the photo for a contact in the Apple Contacts app (a floating imageView-like control in a grouped style table).
The problem I'd like to solve is that touches on the tableView section header go straight to the control. I'd like the table to get a chance to determine if the touch is actually the beginning of a scroll gesture. If not, then the table can pass the event to the section header view for processing.
This is how all the rows in the table behave since I have "delaysContentTouches" for the table on. I suspect the problem is because the section header view is not in the table's view hierarchy. So everything is probably working per spec. just not the way I want.
I want the section header view to behave regarding touches just like rows do (table gets first chance to process).
BTW I am not placing this control in a table row (which would solve the problem) because I want the rounded rect grouped style for all table rows, but not for this one UI element. This control is in the center of my table (header for section 1) which is why I want drags on it to scroll the table.
OK, so apparently this is simulator issue only. On a device my tableView gets the first chance at the event. So I guess I need to listen to the Apple mantra of "always test on an actual device" before posting to StackOverflow. Sorry friends... may my error be helpful to others who, like me, probably spend too much time in the simulator.