I am trying to fix this error:
Error: swiftlint does not have a version "0.11.1" in the Cellar.
by running this:
brew install swiftlint-0.11.1
however this doesn't work, then I tried "brew search swiftlint", but nothing showed up.
Can anyone point to me the correct way to install swiftlint with a specific version?
Go to /usr/local/Cellar/swiftlint you will see all installed switflint version.
Copy swiftlint version folder from other Mac then paste into /usr/local/Cellar/swiftlint
You could check all versions in your Mac by brew info swiftlint
Switch to version you need by brew switch swiftlint x.xx.x
I uploaded some version ==> here
Update: Now you could use pods for this.
My project is using swift2.2 with SwiftLint 0.12.0 installed via brew.
And I decided to change to Pod. There are many changes and errors in each versions. My project is too big, and it's take time to fix all the error and warning (it may effect to current features also...).
Finally I choose pod 'SwiftLint', '0.16.0' and. disable_rules then I don't need to fix any warning nor error.
type_name
shorthand_operator
unused_closure_parameter
This involves a lot of steps, but anyway:
Find the Brew Formula for Swiftlint. It's here.
Now you'll need an older commit of Swift Lint, so you would normally click on the History tab and get to an older commit. However, GitHub might tell you that you need to clone the repo (git#github.com:Homebrew/homebrew-core.git) and then use git log master -- Formula/swiftlint.rb to find your older commit. I'll spare you the details of that.
Now you need a raw URL for an older commit. So the raw URL for the latest commit is https://raw.githubusercontent.com/Homebrew/homebrew-core/master/Formula/swiftlint.rb, but you would use https://github.com/Homebrew/homebrew-core/blob/COMMIT/Formula/swiftlint.rb
Now you can do a brew install directly using this older Swift Lint. In my case, I needed 0.15, so I used:
brew install https://raw.githubusercontent.com/Homebrew/homebrew-core/864095ea97b6d7dc88c772c7f9f36521cf81a77e/Formula/swiftlint.rb
Just go to Swiftlint release page and select the appropriate version.
Download it and extract it.
You should be able to see an executable and a licence txt file.
Now go to /usr/local/Cellar/swiftlint and create a folder with the version (for ex. 0.35.0).
Create a bin folder inside it and paste the swiftlint executable that you have downloaded.
Brew now shows the custom version that you have downloaded . You can check by typing brew info swiftlint in cmd
you can switch by brew switch swiftlint version_number
With mint, which I personally prefer, you can do:
mint install realm/SwiftLint#0.46.2
Go to the SwiftLint's releases section and find the version you're looking for.
Then download its installer (.pkg, .zip, etc), and run it.
Related
I'm trying to install Wine on my Mac via Brew. I'm using Catalina and just updated brew, installed XQuartz and have Xcode installed. When I type the command "Brew install wine" it returns the following:
Error: No available formula with the name "wine"
==> Searching for a previously deleted formula (in the last month)...
Warning: homebrew/core is shallow clone. To get complete history run:
git -C "$(brew --repo homebrew/core)" fetch --unshallow
wine was deleted from homebrew/core in commit 82bd38bc:
wine: delete
To show the formula before removal run:
git -C "$(brew --repo homebrew/core)" show 82bd38bc^:Formula/wine.rb
If you still use this formula consider creating your own tap:
https://docs.brew.sh/How-to-Create-and-Maintain-a-Tap
I'm following this tutorial: https://www.davidbaumgold.com/tutorials/wine-mac/
When I run Brew doctor I get the following:
Please note that these warnings are just used to help the Homebrew maintainers
with debugging if you file an issue. If everything you use Homebrew for is
working fine: please don't worry or file an issue; just ignore this. Thanks!
Warning: "config" scripts exist outside your system or Homebrew directories.
`./configure` scripts often look for *-config scripts to determine if
software packages are installed, and which additional flags to use when
compiling and linking.
Having additional scripts in your path can confuse software installed via
Homebrew if the config script overrides a system or Homebrew-provided
script of the same name. We found the following "config" scripts:
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7-config
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3.7m-config
/Library/Frameworks/Python.framework/Versions/3.7/bin/python3-config
Warning: Unbrewed dylibs were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected dylibs:
/usr/local/lib/libtcl8.6.dylib
/usr/local/lib/libtk8.6.dylib
Warning: Unbrewed header files were found in /usr/local/include.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected header files:
/usr/local/include/fakemysql.h
/usr/local/include/fakepq.h
/usr/local/include/fakesql.h
/usr/local/include/itcl.h
/usr/local/include/itcl2TclOO.h
/usr/local/include/itclDecls.h
/usr/local/include/itclInt.h
/usr/local/include/itclIntDecls.h
/usr/local/include/itclMigrate2TclCore.h
/usr/local/include/itclTclIntStubsFcn.h
/usr/local/include/mysqlStubs.h
/usr/local/include/odbcStubs.h
/usr/local/include/pqStubs.h
/usr/local/include/tcl.h
/usr/local/include/tclDecls.h
/usr/local/include/tclOO.h
/usr/local/include/tclOODecls.h
/usr/local/include/tclPlatDecls.h
/usr/local/include/tclThread.h
/usr/local/include/tclTomMath.h
/usr/local/include/tclTomMathDecls.h
/usr/local/include/tdbc.h
/usr/local/include/tdbcDecls.h
/usr/local/include/tdbcInt.h
/usr/local/include/tk.h
/usr/local/include/tkDecls.h
/usr/local/include/tkPlatDecls.h
Warning: Unbrewed .pc files were found in /usr/local/lib/pkgconfig.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected .pc files:
/usr/local/lib/pkgconfig/tcl.pc
/usr/local/lib/pkgconfig/tk.pc
Warning: Unbrewed static libraries were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected static libraries:
/usr/local/lib/libtclstub8.6.a
/usr/local/lib/libtkstub8.6.a
I'm not sure these warnings has something to do with it.
Thanks in advance!
I was able to build Wine 64 bit from source on macOS Catalina and successfully run Notepad++ 64 bit on it.
My steps were more or less something like that:
Download Wine 4.20 from https://dl.winehq.org/wine/source/4.x/wine-4.20.tar.xz
Extract it
In terminal go to extracted directory
Run: ./configure --enable-win64
It showed that it cannot find some library (I do not remember what exactly) so I installed it with macports (sudo port install name_of_missing_package reported by ./configure)
After I was able to run ./configure --enable-win64 succesfully without errors in terminal run: make
It compiled after more than 30 minutes.
I run it with: ./wine start
It opened windows console and here I was able to cd to Notepad++ 64 bit directory (downloaded from https://notepad-plus-plus.org/repository/7.x/7.0/npp.7.bin.x64.zip note that newest version did not work and throwed some errors about some dll's)
I typed notepad++ to run exe file
It showed some errors about freetype fonts so I installed them with macports and I had to copy them from /opt/X11/lib to /usr/local/lib before wine detected them
After fixing freetype fonts problem I was able to run notepad++
Also you might want to run: sudo spctl --master-disable to disable gatekeeper if you will see some system alerts about loading app from unknown developer.
Also note that instead of ./wine start you can run ./wine explorer for graphical file manager instead of console
Those steps might not be exactly precise, as I'm not sure if I did not miss something but hope it will help someone.
Also note that obviously wine on macOS Catalina will be able to run only some 64 bit windows apps and all 32 bit windows app will not work. I also tested it with IrfanView 64 bit (https://www.fosshub.com/IrfanView.html?dwl=iview453_x64_setup.exe) and it also works fine.
In case you wanted to get wine working for purpose of running 32 bit games then unfortunately it will not work with wine but you can try with virtualbox. You can check https://www.youtube.com/watch?v=3AO8dF0vviQ for some performance improvements tips.
Wine hast been removed from homebrew due to the incompatibility to Macos Catalina
https://discourse.brew.sh/t/issue-with-wine/6188/3
Try using wine64 to run your .exe files after installing wine. The manuals and references don't seem to mention this explicitly.
More Info
I followed the guidance in the wine manual to install using home-brew. After install, I got an error when trying to test the installation like it says in the quickstart.
Install wine-stable using homebrew
brew tap homebrew/cask-versions
brew install --cask --no-quarantine wine-stable
After install, test by opening notepad
wine notepad
zsh: bad CPU type in executable: wine
While uninstalling wine, I noticed one of the linked libraries was called wine64. I immediately reinstalled and tried again using wine64 as the call, as I am using wine on an M1 Mac. This was successful!
You can also use winehelp to get access to more commands that will work with 64bit processor.
Based on https://github.com/Homebrew/homebrew-core/pull/46556#issuecomment-559938873 you can do brew cask install wine-stable on newer version of OS X. And works with recent versions of homebrew since the source version was moved :(
How to install wine on Mac OS Catalina with brew
install homebrew with
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
install xquartz to install wine using brew
brew cask install xquartz
install wine using brew
brew install homebrew/cask-versions/wine-devel
run wine and check the version
wine64 --version
As of Wine 5.0 there is no 32bit support on mac in the official version, but you are able to achieve it via the
Unofficial Wineskin Winery
You can download it from github releases here. And then create a Wineskin with WS11WineCX[64/32]bit19.0.[0/1]. All WS11 versions support Catalina. To use it you also need to turn off the no32exec boot argument. You theoretically can do it by typing:
sudo nvram boot-args="no32exec=0"
into the Terminal while you're logged in but it didn't work out for me, so if you'll have the same problem, reboot into the Recovery mode, in the menubar pick Utilities -> Terminal and type just:
nvram boot-args="no32exec=0"
(without sudo).
Example
To be more exact, to install eg. Steam 32bit, you would:
Install the Unofficiall Wineskin Winery from the provided link
Turn on the 32bit execution boot argument by going into Recovery Mode and entering nvram boot-args="no32exec=0" into the terminal
Open Wineskin, click the '+' sign and scroll down to find the WS11WineCX64bit19.0.1 (the newest version with 64 and 32 bit support, at the time of writing)
Click update/install under the Wrapper Version.
Click Create New Blank Wrapper, name it and click through installation of mono and gecko.
Launch the Wrapper App from Finder. Click Install Software, choose setup executable, and proceed through installation. Then pick the executable from a menu. (In case of steam, Steam.exe)
Note: If you get the "No windows app to open the file"(Like I did) error, click advanced -> configuration and set the Windows EXE to the path to the installer. Then find the place that it has installed in and set that as Windows EXE. Then you can run by clicking Test Run.
Enjoy your windows app, as an .app file!
Hope I helped!
How do I specify a version number when installing something with brew cask install?
For recent versions of Homebrew, Jethro' instructions below may not work work, because we will get an error like:
Invalid usage: Non-checksummed download of <FORMULA_NAME> formula file from an arbitrary URL is unsupported.
I found a workaround:
Go to the Homebrew Cask search page: https://formulae.brew.sh/cask/
Type and find the application you are looking for
Click Cask code link
On Github click History button
Find the version you need by reading the commit messages and view the raw file. Confirm the version variable (normally on line 2) is the version you need.
Click on the name of the commit, then three dots and select View file
Right-click Raw button and Save Link As... to download the file locally
When downloaded, go to download directory cd Downloads/
Finally run brew install --cask <FORMULA_NAME>.rb
Voilà 😄
If you need some visual assistance check the screenshots here.
You can manually point brew at the ruby file for a specific version of a cask, using a git hash. This lets you control which version is installed.
For example:
Find the cask .rb file on the homebrew-cask git repo that you
want.
Get the commit hash, eg
cee7983cd95fc92fdc250fc509f2379cefe647fe in the example above.
Git may give you instructions to view the file history locally - eg git clone https://github.com/Homebrew/homebrew-cask.git git log master -- Casks/CASK_NAME.rb
Point brew at the file using the hash: brew cask install https://raw.githubusercontent.com/caskroom/homebrew-cask/cee7983cd95fc92fdc250fc509f2379cefe647fe/Casks/minikube.rb
The other answers are pretty heavy handed, an alternative is to use the homebrew/cask-versions tap which contains a list of the old (major) versions of casks.
To use them tap it with brew tap homebrew/cask-versions and then you can search for your cask again like brew search --cask yourformula and see if what you're looking for is there.
Or you can see the complete list of casks by clicking on Casks folder at https://github.com/Homebrew/homebrew-cask-versions .
If you run
brew edit [formula]
you can change the version that matches your operating system. If you know the checksum, enter that too. If not, just comment that line out with # and it will skip the check. Then run
HOMEBREW_NO_INSTALL_FROM_API=1 brew reinstall [formula]
I need to use the LFTP program for a script I run. I tried installing it from the website using the instructions in the downloaded folder's "INSTALL" file, but running config always failed. So, I tried to have Homebrew install it, and that worked great.
I have no idea where Homebrew fetches its source from, but the latest version it pulled has a bug which the developer has since fixed on GitHub. Is there a way I can get Homebrew to install the source from the latest commit?
Some packages, such as numpy have a --HEAD option.
--HEAD
Install HEAD version
but the lftp package doesn't have this option. One solution could be to implement it yourserlf:
brew edit lftp
P.S. the homebrew version of lftp already include a patch:
https://raw.githubusercontent.com/macports/macports-ports/edf0ee1e2cf/devel/m4/files/secure_snprintf.patch
it's maybe the same you are looking for. You can see how it's apply whit brew edit lftp.
I am using charts library and trying to run the demo. Before running I have to install the dependencies using Carthage. I goto project folder location and type in terminal:
carthage update
I got the below error:-
Carthage requires git 2.3.0 or later.
How to install Carthage decencies and run the above said demo.
Select Command Line Tools to the latest version of Xcode.
Xcode -> Preferences -> Locations -> Command Line Tools
Open Preferences shortcut : Command + comma ⌘ + ,
It seems like you have used another Xcode version since last time. You should set command line tool again by running the following in terminal:
sudo xcode-select -s <path to Xcode>/Contents/Developer
for example:
sudo xcode-select -s /Applications/Xcode.app/Contents/Developer
Not sure if this will help, but I ran into the same issue and found out that xcodebuild is using a different Xcode that I installed.
so you can probably double check which Xcode you are using:
xcode-select --print-path
Here is the original post that helped me solving this issue:
Change Carthage Swift version
It seems you have to install new version of git.
brew install git
It could say "Target /usr/local/bin/git
already exists. You may want to remove it". I didn't want to remove it and decided only to overwrite:
brew link --overwrite git
It helped me with the same issue. I hope it will help to someone else.
Is there a way to to recompile from an edited source code via homebrew?
I did a change on the source user.hpp of Boost which I now want to recompile Boost with. I tried --build-from-source and --enable-bar but neither works, saying that it is already installed. The only way I can recompile is by reinstall but that simply overwrites the source code I changed.
Any idea?
First option
Download the archive, edit the files, and zip the archive as homebrew does (same name and format).
If you kept the original folder structure created by Homebrew, you can put the modified archive in ~/Library/Caches/Homebrew and then try brew install -f. (the -f is maybe not strictly necessary but it may be need for the SHA-1 mismatch.)
More info on this blog.
Second option
Pulled out from the Homebrew wiki, install the package without homebrew and then link it with brew.
./configure --prefix=/usr/local/Cellar/foo/1.2 && make && make install && brew link foo
Another approach is to add a patch to the homebrew formula (you can edit the formula using brew edit <formula-name>):
https://github.com/Homebrew/brew/blob/master/docs/Formula-Cookbook.md#patches