Unfortunately on my MAC I am unable to get the gem "rmagick" to install. I've tried pretty much a all the options.
I had gotten it to install when I used "imagemagick 6.3.9.7".
Therefore, I want to know is there a way to install a particular version of the software using brew ?
Something like
brew install imagemagick -v 6.3.9.7
Search for available versions with:
brew search imagemagick
To install a specific version use this forumla: brew install package#<version>, in your case it's:
brew install imagemagick#6.3.9.7
Related
I am trying to install rbenv on OS X by following instruction from site link - setup ruby on macbook
when I try brew install rbenv I get below error
Error: rbenv-rbenv already installed To install this version, first 'brew unlink rbenv'
Here is the output from brew doctor
brew doctor
Your system is ready to brew.
I tried brew unlink rbenv on which fails with message Error: No such keg: /usr/local/Cellar/rbenv
Please suggest how this can be solved.
I have tried all solutions as listed below
brew update
brew prune
brew link rbenv
nothing really works
This, I was able to solve by thrashing all the junk files and folders related to rbenv still existing in the system; as brew link rbenv wasn't working
Use command below to find any rbenv files/folder still existing in the system.
sudo find /user/ -name "*rbenv*"
most of the issues could be because /usr/local/opt may still have folders related to rbenv
then carefully remove any listed files/folder using command
sudo rm -r <folder-listed-in-result-of-above-command>
then try brew install rbenv, follow any output from this command (which may suggest brew unlink rbenv && brew link rbenv) and you should be good to go.
I do not recommend file/folder thrashing this way as it could be risky however, to be frank, this is only what worked for me.
Is it possible to run in a verbose mode where it doesn't actually install the package, but just details from where and how it will be install the package?
You can run brew outdated to see a list of outdated packages that will be upgraded when running brew upgrade.
The closest you'll find is to show the dependencies of the package you're trying to install:
$ brew deps ruby
Will list the packages of ruby. You can then use:
$ brew list
to see which packages you have installed. From these two commands, you will be able to tell which packages will be installed by brew install ruby
I've used gentoo linux quite a bit in the past, and their portage system has a nice 'pretend' option for installing packages, the closest I've found for brew is:
brew list (package name)
brew list ruby gives me:
/usr/local/Cellar/ruby/1.9.2-p0/bin/tilt
/usr/local/Cellar/ruby/1.9.2-p0/bin/testrb
/usr/local/Cellar/ruby/1.9.2-p0/bin/ruby
/usr/local/Cellar/ruby/1.9.2-p0/bin/ri
/usr/local/Cellar/ruby/1.9.2-p0/bin/rdoc
/usr/local/Cellar/ruby/1.9.2-p0/bin/rake
/usr/local/Cellar/ruby/1.9.2-p0/bin/rackup
/usr/local/Cellar/ruby/1.9.2-p0/bin/irb
/usr/local/Cellar/ruby/1.9.2-p0/bin/gem
/usr/local/Cellar/ruby/1.9.2-p0/bin/erb
/usr/local/Cellar/ruby/1.9.2-p0/include/ruby-1.9.1/ (21 files)
/usr/local/Cellar/ruby/1.9.2-p0/lib/libruby.1.9.1.dylib
/usr/local/Cellar/ruby/1.9.2-p0/lib/ruby/ (998 files)
/usr/local/Cellar/ruby/1.9.2-p0/lib/ (3 other files)
/usr/local/Cellar/ruby/1.9.2-p0/share/man/ (5 files)
/usr/local/Cellar/ruby/1.9.2-p0/share/ri/ (9522 files)
But I'm guessing you're looking for more info than this?
The brew install --dry-run feature was recently added.
brew install --dry-run vim
==> Would install 1 formula:
vim
==> Would install 5 dependencies for vim:
lua berkeley-db perl libyaml ruby
I am getting the following error:
$script/console
Loading development environment (Rails 2.2.2)
/opt/ruby-enterprise-1.8.6-20080709/lib/ruby/1.8/irb/completion.rb:10:in `require': no such file to load -- readline (LoadError)
Where can i get the file and what directory should it go in?
Thanks!
The readline module is normally part of the Ruby package itself.
Did you manually build your Ruby install? If so, you want to make sure libreadline and its headers are installed, and build again.
On Debian/Ubuntu:
apt-get install libreadline-dev
Or on RHEL/CentOS, try
yum install readline-devel
Update:
You are using a very old release of Ubuntu. If you want to keep using it, open /etc/apt/sources.list in a text editor, and change all occurrences of archive.ubuntu.com to old-releases.ubuntu.com. Then, run apt-get update and try the above again.
I urge you to consider updating your installation, though. Ubuntu 7.10 hasn't seen security updates in quite a while, and using it in production is not recommended. Even if it's not a production machine, there's a good chance you'll run into further problems because of old versions of certain libraries/dependencies.
You need to install the ncurses and readline libraries.
On Ubunutu you could do
sudo apt-get install libreadline5-dev libncurses5-dev
and then you will have to recompile readline which comes with your ruby source
cd <ruby-src-dir>/ext/readline
ruby extconf.rb
make
sudo make install
If you are using RVM you could simply do
rvm package install readline
EDIT:
On newer RVM versions, this last command is
rvm pkg install readline
Add the following line to your Gemfile and run bundle update
gem 'rb-readline'
credits to similar question/answer at install ruby 1.9.3 using rvm on ubuntu
This easiest way to get relief from this problem,
just add to your Gemfile:
gem 'rb-readline'
And then run bundle install
Run the command
rvm requirements
It shows the requirements and dependencies. Install those and reinstall the ruby on rvm
rvm remove 1.9.2
rvm install 1.9.2
It works!
EDIT
If you can't find the requirements option update your rvm.
rvm update --head # older rvm
or use rvm upgrade
Maybe this is a bullshit answer, but I ran into this problem today after upgrading postgres from 9.5.3 to 9.6, along with which homebrew upgraded readline from 6.something to 7. I ended up rolling back my postgres to 9.5.3 and that resolved the issue.
I used a script to install ImageMagick http://github.com/masterkain/ImageMagick-sl
After a while, I got ImageMagick installed.
Then I ran sudo gem install rmagick and got
Building native extensions. This could take a while...
ERROR: Error installing rmagick:
ERROR: Failed to build gem native extension.
.rvm/rubies/ruby-1.9.2-p0/bin/ruby extconf.rb
checking for Ruby version >= 1.8.5... yes
checking for gcc... yes
checking for Magick-config... no
Can't install RMagick 2.13.1. Can't find Magick-config in...
I'm working in OSX Snow Leopard with Ruby 1.9.2 and Rails 3. Any ideas?
I was getting the same error and it got resolved after installing the libmagick9-dev library on ubuntu 11.
Update (Thanks to the commenters - Dec. 2012)
$ sudo apt-get install libmagickwand-dev or $ sudo apt-get install graphicsmagick-libmagick-dev-compat for ubuntu 12
$ sudo apt-get install libmagickwand-dev or $ sudo apt-get install libmagick9-dev for ubuntu 11 or below.
$ yum install ImageMagick-devel for centos
$ brew install imagemagick for Mac OS (using Homebrew)
you need the imagemagick libraries under ubuntu
$ sudo apt-get install libmagickwand-dev
it contains all missing libraires
then run bundle install command
I believe you need the Imagemagick libraries.
If you are using Homebrew (which I'd highly recommend), simply do
$ brew install imagemagick
Then rerun bundle install
Mac OS Mountain Loin (using Homebrew)
download and install http://xquartz.macosforge.org/trac/wiki/X112.7.2
brew install imagemagick
gem install rmagick
sudo apt-get install libmagickwand-dev
works well for Ubuntu 12.10
This is assuming you have installed all other dependencies viz.
sudo apt-get install imagemagick ruby ruby-dev gem`
On CentOS 5.7, I got it to work by first specifying PKG_CONFIG_PATH:
export PKG_CONFIG_PATH=/usr/local/src/ImageMagick-6.7.5-10/magick/
gem install rmagick
For those who got
InitializeMagick() in -lMagickCore... no; -lMagick... no; -lMagick++... no;
this worked for me in OS X 10.8: https://github.com/maddox/magick-installer
From here: RVM + Ruby 1.9.2 + Rmagick + Lion = System Works, RVM Doesn't
Initially, I came around to installing rmagick because it seemed to be a dependency when I tried installing libgtk2.0-dev. I was trying to install that package, because the RGtk2.0 is a requirement for using R package called rattle.
Anyway, none of the above solutions worked for me in installing in my Ubuntu 12.04. Even running sudo apt-get update first didn't seem to help, nor this related posting: Installing rmagick on Ubuntu
I eventually found what works is to troubleshoot using sudo aptitude rather than apt-get.
https://askubuntu.com/questions/223237/unable-to-correct-problems-you-have-held-broken-packages
I recommend the technique of using aptitude to work through the package installation issue.
On Mac Os X, check if /opt/local/bin is in your PATH. If not:
export PATH=/opt/local/bin:/opt/local/sbin:$PATH
sudo gem install rmagick
This worked for me!
I had an issue installing Rmagick gem version 2.13.2 on Debian Jessie. After fighting with the packages in the other answers, I upgraded the version of the Rmagick gem from 2.13.2 to the latest (2.16.0 at time of writing). This installed successfully.
bundle update rmagick
If you tried all solutions, of all posts of whole Internet, have installed and reinstalled many times all indicated packages in all Linux or Mac distributions/versions (even in Windows) and it still not working, close your terminal and open it again. Some times, even if your reload all shell environment, only after I reopen the terminal the bundle install was successfully completed.
After several days of searching, my problema was related to some missing libraries, and the one that get the gem installed was this one:
brew install pkg-config
after this I did my bundle install again and it worked.
I'm try to install the SQLite gem on a Fedora 9 Linux box with Ruby 1.8.6, Rails 2.2.2, gem 1.3, and sqlite-3.5.9. Here's the command I'm running and its results:
sudo gem install sqlite3-ruby
Building native extensions. This could take a while...
ERROR: Error installing sqlite3-ruby:
ERROR: Failed to build gem native extension.
/usr/bin/ruby extconf.rb install sqlite3-ruby
can't find header files for ruby.
Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.4 for inspection.
Results logged to /usr/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.4/ext/sqlite3_api/gem_make.out
gem_make.out just repeats what was already sent to the console. How can I install this gem?
The SQLite RubyGem isn't actually a RubyGem, it's a "CGem", IOW it's written in C. This means it has to be compiled and linked to the Ruby interpreter when you install it and in order to do that it needs the C header files for the Ruby interpreter.
If you compile Ruby yourself, those header files will be installed automatically, however, in RedHat-ish systems, such header files are usually packaged in a seperate package, called <whatever>-dev. So, in this case you will need to install the ruby-dev package and possibly the libsqlite3-dev (Ubuntu) or sqlite-devel (Fedora) package as well.
However, you might be better off just installing your Operating System's pre-packaged libsqlite3-ruby package, that way all the dependencies are automatically satisfied.
(Note: all package names pulled out of thin air, might be different on your system.)
You probably need the ruby dev package. For Ubuntu you have to install ruby1.8-dev which includes the ruby header files. A quick google says that the yum package is ruby-devel. so run this:
sudo yum install ruby-devel
I faced problem installing sqlite3-ruby gem on my fedora 13 box.
It was fixed after sudo yum install sqlite-devel
When I had that problem:
gem install sqlite3 -v '1.3.9'
Building native extensions. This could take a while...
ERROR: Error installing sqlite3:
ERROR: Failed to build gem native extension.
For me worked, installing the "libsqlite3-dev" with:
apt-get install libsqlite3-dev
sudo apt-get install ruby-dev
Fixed it for me.
On Ubuntu 9 and 10 try:
sudo apt-get install ruby-dev
sudo apt-get install sqlite3-dev
Then run
gem install sqlite3
Run the following for Fedora OS:
yum install rubygem-sqlite3
On alpine, you need to install the sqlite-dev package.
I also faced this same issue, the problem is that your Linux installation requires the development libraries for SQLite3 to be installed in order to build the gem.
Here's how I fixed the issue
Open your terminal and run the following commands
sudo apt-get install sqlite3
sudo apt-get install libsqlite3-dev
And then try installing Sqlite3 gem again using this command
gem install sqlite3
That's all.
I hope this helps
Do you have all the source code required to build sqlite3-ruby? Gem is trying to compile some C code and cannot find the headers. You can probably use a fedora rpm for sqlite3-ruby (I don't use fedora, but I'm sure one exists) if you prefer to forgo compiling. Personally for ruby stuff, I prefer to use gem rather than a distro's packaging system.
I'm not really familiar with Fedora, but in Ubuntu when you are installing packages you have apt-get, and you have to install the build-essentials which includes gcc and other compilation tools for C. I would say that could be your issue, and you make look into how that can be install either using RPM or apt-get on Fedora.
I fixed the problem on my OLPC (Fedora 9) by installing 'gcc' oddly enough. It seems like it should have been one of those dev packages, but no.
Also, regarding the other packages, the suffix is "-devel", not "-dev", so make sure you get those ending right: "ruby-devel", "sqlite-devel"...
Once you get that installed, if you get errors about your gems being too old "< 1.3.1" when you try to run various rails scripts, eg: script/server or script/console, google "upgrade_rubygems" to fix that problem...
HTH...
Run "sudo yum install sqlite-devel" and then "gem install sqlite3". Had the same problem on my Fedora 15.
I had this same exact issue...instead of gem'ing the missing pieces I used synaptic on unbuntu.
The key package for me was libsqlite-ruby1.9.1 ... I documented my experience (for reference) with this error at :
Sqlite3-gem-error-during-bundle-install
I encountered this error while running bundle install after generating a react-rails app on Fedora 29. I was able to identify a suitable development package by running dnf search sqlite3, then installed it dnf install libsqlite3x-devel. This fixed it for me.