There are many people on stack overflow asking to solve this question but there is no solution that has worked. My application is an MVC and a Web Api. Testing locally on Visual Studio works fine.
However, when i deploy it, it gives me the error, No MediaTypeFormatter is available to read an object of type 'IEnumerable1' from content with media type 'text/html'.
Exception Details: System.Net.Http.UnsupportedMediaTypeException: No MediaTypeFormatter is available to read an object of type 'IEnumerable`1' from content with media type 'text/html'.
Here is the code below.
WebApiClient.BaseAddress = new Uri("https://myweburl/WEBAPI/api/");
WebApiClient.DefaultRequestHeaders.Clear();
WebApiClient.DefaultRequestHeaders.Accept.Add(new MediaTypeWithQualityHeaderValue("application/json"));
//WebApiClient.DefaultRequestHeaders.Accept.Add(new MediaTypeWithQualityHeaderValue("text/html"));
I don't understand why the error says the server puts out text/html. But when i tested it locally and it is JSON formatting.
Does anyone know if it is a result of net target framework as well? This is running the NET target framework of 4.6.1 for both the web api and mvc. I changed my information in the web.config to 4.0 but it didn't work as well.
<system.web>
<customErrors mode="Off" />
<compilation targetFramework="4.6.1" debug="true" />
<httpRuntime targetFramework="4.6.1" />
</system.web>
Basically, there was a firewall denying my permissions and generating the text/HTML instead of querying from the database. However, there is little support to be able to figure out what is the error. My suggestion is to print out the information that is being passed through from the Web Api and then see if it a permission denied by the firewall.
I am already running a site where there are webforms and classic asp running concurrently. Now I have created a new project with MVC and trying to upload it to the site. I have published it in my local and uploaded files to site. But when I am trying to ping the url if says 404(file not found).
In order to get exact problem please add the following to your web.config under
<system.web>
<customErrors mode="Off" />
...
Then come back with your problem.
Im trying to upload a MVC site to a server but it just seems it wont play ball. Never had such weird errors for uploading a mvc site.
Get this message when I navigate to the web page.
The attribute 'debug' has been locked in a higher level configuration.
What the h... does that mean?
Source error:
An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
some part of the web.config that I have been messing around with:
<customErrors mode="Off">
</customErrors>
<compilation debug="false" />
It means that the debug attribute has been set at machine level and you are not allowed to change it. This is done in the global IIS configuration file that you won't have access to. In effect, a web.config just inherits from that and all your XML is just overriding or adding to those values.
Now I assume it's been locked to prevent debug="true", this means you can just remove that attribute completely, which means you can remove the entire compilation element.
I have an IIS7.5 web-site, on Windows Server 2008, with an ASP.NET MVC2 web-site deployed to it. The website was built in Visual Studio 2008, targeting .NET 3.5, and IIS 5.1 has been successfully configured to run it as well, for local testing.
However, whenever I try and navigate to a page running in IIS7, I get a 404 error.
I have checked the following things:
There is no corresponding 404 log entry in IIS logs.
Actually, there are 404 entries in the IIS log.
The application pool for the web-site is set to use the Integrated pipeline.
The "customErrors" mode is set to off.
.NET 3.5 SP1 is installed
ASP.NET MVC 2 is installed
I've used MVC Diagnostics to confirm all MVC DLLs are being found.
ASP.NET is enabled in IIS, which we've demonstrated by running the MVC Diagnostics page.
KB 2023146 did highlight that HTTP Redirection was off, so we've turned it on, but no joy.
EDIT
Ok, so we've installed the world's simplest MVC application (the one which is created when you create a new MVC2 project in Visual Studio), and we are still getting 404s on any page we try and access - e.g.
<my_server>/Home/About will generate a 404.
Any ideas will be greatly appreciated!
This is quite often caused by the following missing from the web.config:
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
Do you have a problem with just 1 page or the whole site is not working?
A) 1 page
You can use RouteDebugger to verify if the route is matched correctly
B) Whole site
I assume you're using Windows Server - check if ASP.NET is enabled in IIS - it's disabled by default, I believe.
You can use MvcDiagnostics page to check if all dlls are deployed properly.
Are you running in IIS7 integrated mode? Classic mode of IIS7 does not automatically map extensionless URLs to ASP.NET (much like IIS6)
Make sure your Web.config tag is configured correctly.
We finally nailed this issue by exporting the IIS configuration of a working server, and comparing it to ours.
It was a really obscure setting which had been changed from the default.
IIS ROOT → request Filtering → Filename Extensions Tab → Edit Feature Settings → Allow unlisted file name extensions
This should be ticked.
This can be set at the IIS level, or the site-level.
Glad that fixed your problem. Others researching this issue should take note of the extensionless URL hotfix: http://support.microsoft.com/kb/980368
If none of the other solutions here solved your issue, check that you have the
Global.asax
file in your website. This solved the issue for me.
Checkout if KB 2023146 applies to your scenario. Also try requesting directly a controller action: /yoursitename/home/index
Apparently this can have many different causes.
For us, the problem was that the DNS entry was configured for two IP addresses, but the IIS configuration would only listen to one of them. So we got unpredictable results, sometimes it would work, sometimes a few files (css, etc) would not load, and sometimes the whole page would not load.
For me it was all about installing .NET Framework 4.6.1 on the server (my app was targeting that version)
You'll also get this if your bindings aren't correct. If you don't have www or a subdomain it'll return a 404.
I had this problem when running my MVC4 site with an app pool set to ASP.NET 4.0 and the Classic pipeline, even though the extension handlers were set in my web.config and were showing correctly in IIS. The site worked in Integrated Pipeline so I knew it was a configuration issue, but I couldn't nail it down. I finally found that ASP.NET 4 was disabled for the server in the ISAPI and CGI Restrictions settings. I enabled ASP.NET 4.0 and it worked.
In addition to checking if you're running in integrated pipeline mode, make sure your application pool is set to use .NET! I recently ran into this problem, and when I went in to check the app pool settings, I found that somehow it had been set to "No Managed Code." Whoops!
My Hosting company fixed this for me by doing this (I removed the original password value of course).
<system.webServer>
<security>
<authentication>
<anonymousAuthentication password="<password>" />
</authentication>
</security>
</system.webServer>
Typically I encounter this issue when there is a Routing problem. I compare a working vs non-working to resolve it.
Today however I accidentially created a Virtual Directory in IIS.
It has to be an Application, right click on the Virtual Directory (with a folder icon) -> Convert to Application:
Don't use runAllManagedModulesForAllRequests. You want to let IIS handle resources such as images.
<system.webServer> <!-- Rather do NOT use this -->
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
Instead add the MVC routing module
<system.webServer>
<modules>
<remove name="UrlRoutingModule-4.0" />
<add name="UrlRoutingModule-4.0" type="System.Web.Routing.UrlRoutingModule" preCondition="" />
</modules>
</system.webServer>
My ASP.NET MVC application is within a folder called Stuff within IIS 6.0 webroot folder. So I access my pages as http://localhost/Stuff/Posts. I had EMLAH working while I was using the in-built webserver of Visual Studio. Now when I access http://localhost/Stuff/elmah.axd, I get resource not found error. Can anyone point my mistake here! Here is config file entry,
<add verb="POST,GET,HEAD" path="elmah.axd" type="Elmah.ErrorLogPageFactory, Elmah"/> //Handler
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah"/>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah"/>
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah"/> //Module
Working with IIS7 I found I needed both sections of the web.config populated (system.web AND system.webServer) - see Elmah not working with asp.net site.
Perhaps this is related.
Have you added an ignore *.axd routes in global.asax?
For Elmah, we need to differentiate between two things:
First the http modules doing all the work of error logging, emailing...etc.
Second, the http handlers, displaying the error log page and other pages (rss...etc.)
I was having the same problem of 404 resource not found because I have a weird setup!
on my development machine, (windows 7, iis 7 ) elmah was working like a charm because the application pool was working in the integrated pipeline mode. In the production machine, however, the application was using the managed pipeline and I tried all my best to make elmah work but it was all useless...
I then got the idea of displaying the UI (error log page, rss, error detail,...) using regular aspx pages.
I downloaded the source code, made some changes (sorry Atif, I was forced to do this because I needed the quickest solution) and then in my application , I created a folder under which I created regular aspx pages which inherits from Elmah defined pages.
The page only contains one line (ex: for the detail page: <%# Page Language="C#" Inherits ="Elmah.ErrorDetailPage"%>)
Now, I was able to run Elmah regardless of IIS 6/7 and it is working like a charm.. and It saved me from a big headache of correctly configuring http handlers and troubleshooting its work! additionally, configuring security is much simpler!
I don't know if the community is interested in this solution (If so, I am ready to post my full changes).
Hope that this gives you an idea on how to solve the problem in an alternative way (and if you need the modified dll with complete instructions on how to use it, just tell me!)
In the application pool settings in IIS set Managed Pipelin Mode to Classic if you don't want to change code or the web.config file. Your axd.s will then work as before.
Can you post the rest of your web.config?
Or, if you're comfortable enough, can you just ensure that the httpHandlers and httpModules (NOT handlers and modules) sections are filled in properly in the web.config?