I'm looking at a way to receive (any form of) a notification in IOS (iPhone).
This is needed for a "nurse call" like project and should work regardless of internet connection.
But there are a few "small" restrictions.
It must work on a local network (no connection to the world wide web).
The app must work in background (not always opened).
The response time should be 1 minute max.
If it's of any help, I do have the possibility of using a local Apple MacOSX server.
Things I've tried.
I've looked at Apple Push Notifications, though I believe it will need access to the APNs (server). And can't work locally.
I've looked at keeping an "server" open in an IOS app, though this server will certainly be killed when the app is not in the foreground.
I've looked at the background mode "fetch", but it's not possible to set the frequency and it may just work once every 30 minutes.
I've looked at the Apple server, but I'd rather not use a local e-mail server since it's probably not fast enough and it'll not be possible to interact with an app this way.
The "Messages Server" seems to be interesting, but I'm not sure if I can receive those messages on an iPhone (from a local server, withouth the need of Apple servers).
Related
App that I am working on is offering a VPN connection, that can run even when the app is not running at all. This service is paid, but also I would like to offer a free trial limited by session length and maximum data transfered.
The problem I've encoutered, is with monitoring the data trasnfered when the app is in background or not runing at all. So far the best solution I've came up with, would be to periodically run small task that checks if the user is still within the data limit and if not, the VPN will be disconnected and notification shown to the user.
Will silent notification get priority every time it will be required? According to this quote from developer.apple.com, they are low-priority which isn't what I need, but I was unable to find anything else.
Silent notifications are not meant as a way to keep your app awake in the background, nor are they meant for high priority updates. APNs treats silent notifications as low priority and may throttle their delivery altogether if the total number becomes excessive. The actual limits are dynamic and can change based on conditions, but try not to send more than a few notifications per hour.
How can this be done reliably? Is there any other way?
If this is a personal VPN connection (i.e. you're just providing a config to the standard system) and you're not in the flow, then this isn't possible. There is intentionally no "I want my program to run all the time" solution. Even if you come up with one, Apple will probably shut you down.
If you're writing an MDM/supervised VPN connection (i.e. you're providing a ...Flow object of your own), then you're already running all the time and you can just control it as you want. I'm assuming you have the former or you wouldn't be asking.
I believe you're doing this backwards. Monitor the session length on the server, and disconnect there. When you disconnect, send a push notification, which can display a message directly without having to open the app. That is both robust and the intended solution.
Periodically posting a silent notification to wake yourself up will definitely not work because Apple specifically does not want you to do that and they explicitly break it (as they note "silent notifications are not meant as a way to keep your app awake in the background"). It's bad for battery life. This is intended to be solved on your sever, on on the user's device.
We are building an iOS iPhone app that needs to check-in with a server on a 12 hour basis. This is needed to let the server know that the app is still using it's service on the server. To our understanding this is possible when the app is in background state (not showing on the foreground) via backgound fetch or remote notifications.
But this is not possbile when the app is not running or terminated, when the app is in these states then there is no way to initiate communication with a server. Is this statement corret? Is it possible initiate the communication after a device bootup, is it then possible to send a small keep alive message to te sever?
The background fetch and responding to remote notifcations is not possible in the not running and termenating states(?), so we cannot use these mecahnisms for this purpose. If that is the case are there any other solutions that we can try? Or is it just not possible?
We looked at many sources on the internet but some say that it is possible and others say it is not.
You might want to take a look at the Silent Push Notifications. Here is the thing, if the app is in background mode or suspended state, you will be fine. If the app was killed by the user, you have a problem.
You can always send a silent push notification, and wait for a service call made from the device to your service. If there is a response, it means the app was in background or suspended, and then you can go ahead and do whatever you need to do. If no request is made, it means that app was killed. Then you might want a sent a non silent push letting the user of that device know that he needs to launch the app or something like that. I don't know how you are going to work around it, but that could be a possibility.
I would tell you to take a look at NSURLSession and Background NSURLSessionConfiguration as well, but you will run into the same issue. If the user manually terminates the app, you need to find a work around to set up that connection to the server, and that will imply the user to somehow launch your application.
I understand the basic concept of having a provider talk to Apple's Push Notification Server which then pushes the notification to the phone. Usually, the provider is an app server running on some machine somewhere completely separate from the app.
However, we don't currently have a separate server, and don't yet need one as everything is currently handled in-app. So, is there any way we can use the app itself as the provider to send a notification to Apple's server and thus to another phone?
Basic concept: we have a game and when a user completes 70% of the level, we'd like to notify his competitors that he's close to finishing the game (or that he has finished at 100%).
If it's possible, are there any security concerns with this approach?
P.S. The app already knows who the competitors are because it displays them in a UITableView.
Technically it's possible. If you include the push certificate with your app, and you have a way to send the device token of each device to all other devices that may need to push to that device, you can push a notification directly from one device to another.
However, in practice, that would require opening and closing many connections to the APNS servers frequently (you'll need a connection for each device, and every time a device loses network connection - which may happen often - you'll have to re-open that connection), which will probably cause Apple to block your app from connecting to their APNS server (since they would interpret it a DDoS attack).
Therefore you should use a server.
For future visitors to this question: we wound up ditching Amazon SNS since we spent nearly 8 hours and couldn't get it working the way we wanted. Instead, we setup Parse Push in rough 15 minutes with exactly what we wanted to do, so I would definitely recommend giving it a look.
I have a chat application developed by JS. I want to send PING to server once in a while. Its not a problem if app runs on fore ground. The problem is when user minimizes it or open another app. My app looses its focus and gets into suspended state.
I have following two use-cases.
To keep the chat session open I need to send PING to server (Its an IRC server) every X minutes even the app runs in background.
We also need to check for new messages (by ajax on a local http server) and add a local notification to the notification queue so when user clicks on it app can resume
I have found apple does not allow running apps in the background. if they allow they require special permission. I found some apps does it by requesting finite length execution time.
What is the best way to get highest possible background execution time? As a chat app can I request permission for voip, location or any other way ?
Note: the app will be running in an environment where there is no Internet. Hence push notification will not work here.
Update: After doing a lot searching I found background fetch. It seem background fetch will suite it. But still the problem remains, its not called in a timely manner.
This sounds like an interesting problem. From reading the various comments, it sounds like you want this to work when you're on a local network - so you have wifi, but the wifi router/base station isn't connected to the actual internet?
Because background refresh isn't going to be predictable - you'll never know when it is going to update - you might want to get creative.
You could look into exploiting iOS VOIP support, only without the Voice! Apple has some tips on VOIP here. VOIP basically uses something called SIP (Session Initiation Protocol), which is signalling layer of the call, and a lot like HTTP. It's this SIP layer that you want to take advantage of.
This isn't going to be terribly easy, but it should be achievable. Setup your app to use VOIP, and then look into something like PJSip as your SIP library. Then, on your local network have a SIP Server (I'm sure there are plenty open source implementations) that you can register your iPhone against (so your server knows where your phone is, pretending to be a VOIP phone). This should work, because it doesn't need to go through Apple as far as I am aware... And will run happily on your local network.
Then, the server can send a message via SIP to the handset, as if it were instigating a VOIP session. You app is awoken, gets the messages - ideally from the SIP message if possible - and then just doesn't start the session. SIP was designed just for creating sessions, not just VOIP. When I worked in Telecoms R&D (a long time ago) we were using it to swap between Text/Voice/Video, all using local servers.
You'll have to jump a lot of hoops to make this work, but it would be pretty awesome. I have never tried this actual use case - especially with iOS, but I'm fairly sure it will work. It is a bit of a fudge, but should get you where you need to go.
Good luck!
You can use something like PubNub to build this chat app with iOS using native Objective-C code, or with the Phonegap (Cordova) libs.
The beauty with using a real-time messaging network like PubNub is that when the app goes to the background, you can easily have the chat messages come in on APNS.
When the app is in the foreground, it can just receive them as the native (PubNub) message. And if it needs to "catch-up" with the messages it missed while in the background (but received via APNS), its trivial to implement.
Also, PubNub is platform agnostic -- so you can easily also use it on Web, Android, BB, Windows Phone, etc.
http://www.pubnub.com/blog/build-real-time-chat-10-lines-code/
http://www.pubnub.com/blog/html5-websockets-beautiful-real-time-chat-on-mobile-using-pubnubs-channel-presence/
https://github.com/pubnub/objective-c/tree/master/iOS
https://github.com/pubnub/javascript/tree/master/phonegap
geremy
We are building an enterprise class Work Order application where the users will often be in areas with no network coverage. We want to be sure that when they come back into coverage, any work that they have done on locally stored work orders is sent back to the server ASAP. This is easy to do if the user keeps the app running, but in our situation it is very likely that they will switch between apps, and the Work Order app may not be running when they come back into coverage.
We have thought of having the app fire an email to a server side listener when it senses that it is out of coverage. When the device comes back into coverage, the email should get delivered, and the server can send a push notification to the user to open the app. This feels like a bit of a hack... is there a better way to handle this situation?
As you already noticed, push notifications is the way to go, but even with them its not guaranteed that the user will send the data or even open the app.
I would suggest that you make the data itself expire after a limited time and alert the users when they minimize or even close the application.
You can also use local notification to alert about expiration.
So long as this is an enterprise application that doesn't have to be distributed through the App Store, you can abuse the audio background processing mode to keep your application running at all times. All you have to do is play a silent audio file on a loop as if you were a media player. This will keep your application running in the background, where you can retry connections to the server as you'd like.