In my app that I am building to learn Rails and Ruby, I have below iteration/loop which is not functioning as it should.
What am I trying to achieve?
I am trying to find the business partner (within only the active once (uses a scope)) where the value of the field business_partner.bank_account is contained in the field self_extracted_data and then set the business partner found as self.sender (self here is a Document).
So once a match is found, I want to end the loop. A case exists where no match is found and sender = nil so a user needs to set it manually.
What happens now, is that on which ever record of the object I save (it is called as a callback before_save), it uses the last identified business partner as sender and the method does not execute again.
Current code:
def set_sender
BusinessPartner.active.where.not(id: self.receiver_id).each do |business_partner|
bp_bank_account = business_partner.bank_account.gsub(/\s+/, '')
rgx = /(?<!\w)(#{Regexp.escape(bp_bank_account)})?(?!\w)/
if self.extracted_data.gsub(/\s+/, '') =~ rgx
self.sender = business_partner
else
self.sender = nil
end
end
end
Thanks for helping me understand how to do this kind of case.
p.s. have the pickaxe book here yet this is so much that some help / guidance would be great. The regex works.
Using feedback from #moveson, this code works:
def match_with_extracted_data?(rgx_to_match)
extracted_data.gsub(/\s+/, '') =~ rgx_to_match
end
def set_sender
self.sender_id = matching_business_partner.try(:id) #unless self.sender.id.present? # Returns nil if no matching_business_partner exists
end
def matching_business_partner
BusinessPartner.active.excluding_receiver(receiver_id).find { |business_partner| sender_matches?(business_partner) }
end
def sender_matches?(business_partner)
rgx_registrations = /(#{Regexp.escape(business_partner.bank_account.gsub(/\s+/, ''))})|(#{Regexp.escape(business_partner.registration.gsub(/\s+/, ''))})|(#{Regexp.escape(business_partner.vat_id.gsub(/\s+/, ''))})/
match_with_extracted_data?(rgx_registrations)
end
In Ruby you generally want to avoid loops and #each and long, procedural methods in favor of Enumerable iterators like #map, #find, and #select, and short, descriptive methods that each do a single job. Without knowing more about your project I can't be sure exactly what will work, but I think you want something like this:
# /models/document.rb
class Document < ActiveRecord::Base
def set_sender
self.sender = matching_business_partner.try(:id) || BusinessPartner.active.default.id
end
def matching_business_partners
other_business_partners.select { |business_partner| account_matches?(business_partner) }
end
def matching_business_partner
matching_business_partners.first
end
def other_business_partners
BusinessPartner.excluding_receiver_id(receiver_id)
end
def account_matches?(business_partner)
rgx = /(?<!\w)(#{Regexp.escape(business_partner.stripped_bank_account)})?(?!\w)/
data_matches_bank_account?(rgx)
end
def data_matches_bank_account?(rgx)
extracted_data.gsub(/\s+/, '') =~ rgx
end
end
# /models/business_partner.rb
class BusinessPartner < ActiveRecord::Base
scope :excluding_receiver_id, -> (receiver_id) { where.not(id: receiver_id) }
def stripped_bank_account
bank_account.gsub(/\s+/, '')
end
end
Note that I am assigning an integer id, rather than an ActiveRecord object, to self.sender. I think that's what you want.
I didn't try to mess with the database relations here, but it does seem like Document could include a belongs_to :business_partner, which would give you the benefit of Rails methods to help you find one from the other.
EDIT: Added Document#matching_business_partners method and changed Document#set_sender method to return nil if no matching_business_partner exists.
EDIT: Added BusinessPartner.active.default.id as the return value if no matching_business_partner exists.
Related
In a Rails 5.1 app, I have a query object (PORO) named CoolProducts.
class CoolProducts
def self.call(relation = Product.all)
...
# return an instance of Product::ActiveRecord_Relation
end
end
Now I need to limit the found Products based on the fact the name matches a string.
The following works
CoolProducts.call.where("name ILIKE ?", "%#{string}%")
However, I'd like to encapsulate the matching login within the CoolProducts class allowing to do something like
CoolProducts.call.including_in_name(string)
But I'm not sure where to start from.
Any ideas?
It will be difficult if you want any of your methods to be chainable or return ActiveRecord::Relation.
If you consider explicitly fetching the records when you're done chaining being ok, this should work:
class CoolProducts
def initialize(relation)
#relation = relation
end
def self.call(relation = Product.all)
new(relation).apply_scopes
end
attr_reader :relation
alias_method :fetch, :relation
def including_in_name(string)
tap { #relation = relation.where("name ILIKE ?", string) }
end
def apply_scopes
tap { #relation = relation.where(price: 123) }
end
end
Usage:
CoolProducts.call.including_in_name(string).fetch
I'm using Rails 4 and have an Article model that has answer, side_effects, and benefits as attributes.
I am trying to create a before_save method that automatically looks at the side effects and benefits and creates links corresponding to another article on the site.
Instead of writing two virtually identical methods, one for side effects and one for benefits, I would like to use the same method and check to assure the attribute does not equal answer.
So far I have something like this:
before_save :link_to_article
private
def link_to_article
self.attributes.each do |key, value|
unless key == "answer"
linked_attrs = []
self.key.split(';').each do |i|
a = Article.where('lower(specific) = ?', i.downcase.strip).first
if a && a.approved?
linked_attrs.push("<a href='/questions/#{a.slug}' target=_blank>#{i.strip}</a>")
else
linked_attrs.push(i.strip)
end
end
self.key = linked_attrs.join('; ')
end
end
end
but chaining on the key like that gives me an undefined method 'key'.
How can I go about interpolating in the attribute?
in this bit: self.key you are asking for it to literally call a method called key, but what you want, is to call the method-name that is stored in the variable key.
you can use: self.send(key) instead, but it can be a little dangerous.
If somebody hacks up a new form on their browser to send you the attribute called delete! you don't want it accidentally called using send, so it might be better to use read_attribute and write_attribute.
Example below:
def link_to_article
self.attributes.each do |key, value|
unless key == "answer"
linked_attrs = []
self.read_attribute(key).split(';').each do |i|
a = Article.where('lower(specific) = ?', i.downcase.strip).first
if a && a.approved?
linked_attrs.push("<a href='/questions/#{a.slug}' target=_blank>#{i.strip}</a>")
else
linked_attrs.push(i.strip)
end
end
self.write_attribute(key, linked_attrs.join('; '))
end
end
end
I'd also recommend using strong attributes in the controller to make sure you're only permitting the allowed set of attributes.
OLD (before I knew this was to be used on all attributes)
That said... why do you go through every single attribute and only do something if the attribute is called answer? why not just not bother with going through the attributes and look directly at answer?
eg:
def link_to_article
linked_attrs = []
self.answer.split(';').each do |i|
a = Article.where('lower(specific) = ?', i.downcase.strip).first
if a && a.approved?
linked_attrs.push("<a href='/questions/#{a.slug}' target=_blank>#{i.strip}</a>")
else
linked_attrs.push(i.strip)
end
end
self.answer = linked_attrs.join('; ')
end
Need a little help over here :-)
I'm trying to extend the Order class using a decorator, but I get an error back, even when I use the exactly same code from source. For example:
order_decorator.rb (the method is exactly like the source, I'm just using a decorator)
Spree::Order.class_eval do
def update_from_params(params, permitted_params, request_env = {})
success = false
#updating_params = params
run_callbacks :updating_from_params do
attributes = #updating_params[:order] ? #updating_params[:order].permit(permitted_params).delete_if { |k,v| v.nil? } : {}
# Set existing card after setting permitted parameters because
# rails would slice parameters containg ruby objects, apparently
existing_card_id = #updating_params[:order] ? #updating_params[:order][:existing_card] : nil
if existing_card_id.present?
credit_card = CreditCard.find existing_card_id
if credit_card.user_id != self.user_id || credit_card.user_id.blank?
raise Core::GatewayError.new Spree.t(:invalid_credit_card)
end
credit_card.verification_value = params[:cvc_confirm] if params[:cvc_confirm].present?
attributes[:payments_attributes].first[:source] = credit_card
attributes[:payments_attributes].first[:payment_method_id] = credit_card.payment_method_id
attributes[:payments_attributes].first.delete :source_attributes
end
if attributes[:payments_attributes]
attributes[:payments_attributes].first[:request_env] = request_env
end
success = self.update_attributes(attributes)
set_shipments_cost if self.shipments.any?
end
#updating_params = nil
success
end
end
When I run this code, spree never finds #updating_params[:order][:existing_card], even when I select an existing card. Because of that, I can never complete the transaction using a pre-existent card and bogus gateway(gives me empty blanks errors instead).
I tried to bind the method in order_decorator.rb using pry and noticed that the [:existing_card] is actuality at #updating_params' level and not at #updating_params[:order]'s level.
When I delete the decorator, the original code just works fine.
Could somebody explain to me what is wrong with my code?
Thanks,
The method you want to redefine is not really the method of the Order class. It is the method that are mixed by Checkout module within the Order class.
You can see it here: https://github.com/spree/spree/blob/master/core/app/models/spree/order/checkout.rb
Try to do what you want this way:
Create file app/models/spree/order/checkout.rb with code
Spree::Order::Checkout.class_eval do
def self.included(klass)
super
klass.class_eval do
def update_from_params(params, permitted_params, request_env = {})
...
...
...
end
end
end
end
I have a lot of dynamic code which keeps complex relations in a string.
ex:
"product.country.continent.planet.galaxy.name"
How can I check if these relations exist?
I want a method like the following:
raise "n00b" unless Product.has_associations?("product.country.planet.galaxy")
How could I implement this?
Try this:
def has_associations?(assoc_str)
klass = self.class
assoc_str.split(".").all? do |name|
(klass = klass.reflect_on_association(name.to_sym).try(:klass)).present?
end
end
If these are active record associations, here's how you can do it:
current_class = Product
has_associations = true
paths = "country.planet.galaxy".split('.')
paths.each |item|
association = current_class.reflect_on_association( item )
if association
current_class = association.klass
else
has_associations = false
end
end
puts has_association
And this will tell you if this specific path has all the associations.
If indeed you are storing the AR associations in a string like that, this code placed in an initializer should let you do what you want. For the life of me I can't quite figure out why you'd want to do this, but I trust you have your reasons.
class ActiveRecord::Base
def self.has_associations?(relation_string="")
klass = self
relation_string.split('.').each { |j|
# check to see if this is an association for this model
# and if so, save it so that we can get the class_name of
# the associated model to repeat this step
if assoc = klass.reflect_on_association(j.to_sym)
klass = Kernel.const_get(assoc.class_name)
# alternatively, check if this is a method on the model (e.g.: "name")
elsif klass.instance_method_already_implemented?(j)
true
else
raise "Association/Method #{klass.to_s}##{j} does not exist"
end
}
return true
end
end
With this you'll need to leave off the initial model name, so for your example it would be:
Product.has_associations?("country.planet.galaxy")
Taking following association declaration as an example:
class Post
has_many :comments
end
Just by declaring the has_many :comments, ActiveRecord adds several methods of which I am particularly interested in comments which returns array of comments. I browsed through the code and following seems to be the callback sequence:
def has_many(association_id, options = {}, &extension)
reflection = create_has_many_reflection(association_id, options, &extension)
configure_dependency_for_has_many(reflection)
add_association_callbacks(reflection.name, reflection.options)
if options[:through]
collection_accessor_methods(reflection, HasManyThroughAssociation)
else
collection_accessor_methods(reflection, HasManyAssociation)
end
end
def collection_accessor_methods(reflection, association_proxy_class, writer = true)
collection_reader_method(reflection, association_proxy_class)
if writer
define_method("#{reflection.name}=") do |new_value|
# Loads proxy class instance (defined in collection_reader_method) if not already loaded
association = send(reflection.name)
association.replace(new_value)
association
end
define_method("#{reflection.name.to_s.singularize}_ids=") do |new_value|
ids = (new_value || []).reject { |nid| nid.blank? }
send("#{reflection.name}=", reflection.class_name.constantize.find(ids))
end
end
end
def collection_reader_method(reflection, association_proxy_class)
define_method(reflection.name) do |*params|
force_reload = params.first unless params.empty?
association = association_instance_get(reflection.name)
unless association
association = association_proxy_class.new(self, reflection)
association_instance_set(reflection.name, association)
end
association.reload if force_reload
association
end
define_method("#{reflection.name.to_s.singularize}_ids") do
if send(reflection.name).loaded? || reflection.options[:finder_sql]
send(reflection.name).map(&:id)
else
send(reflection.name).all(:select => "#{reflection.quoted_table_name}.#{reflection.klass.primary_key}").map(&:id)
end
end
end
In this sequence of callbacks, where exactly is the actual SQL being executed for retrieving the comments when I do #post.comments ?
You need to dig deeper into the definition of HasManyAssociation.
colletion_reader_method defines a method called comments on your Post class. When the comments method is called, it ensures there's a proxy object of class HasManyAssociation stored away (you'll need to dig into the association_instance_set method to see where exactly it stores it), it then returns this proxy object.
I presume the SQL comes in when you call a method on the proxy, for example, calling each, all or accessing an index with [].
Here you are: a standard AR query getting all the ids of the associated objects
send(reflection.name).all(:select => "#{reflection.quoted_table_name}.#{reflection.klass.primary_key}").map(&:id)
but sure Activerecord is messy... a re-implementation (better without eval) of has_many maybe can be useful for you:
def has_many(children)
send(:define_method, children){ eval(children.to_s.singularize.capitalize).all( :conditions => { self.class.name.downcase => name }) }
end
In the association reader the line
association = association_proxy_class.new(self, reflection)
in the end will be responsible for executing the find, when the instance variable is "asked" for and "sees" that #loaded is false.
I am not 100% sure I understand what you are looking for.
The sql generation is not in one place in AR. Some of the database specific things are in the database "connection_adapters".
If you are looking for the way how the records are found in the database, look at the methods "construct_finder_sql" and "add_joins" in the ActiveRecord::Base module.
def construct_finder_sql(options)
scope = scope(:find)
sql = "SELECT #{options[:select] || (scope && scope[:select]) || default_select(options[:joins] || (scope && scope[:joins]))} "
sql << "FROM #{(scope && scope[:from]) || options[:from] || quoted_table_name} "
add_joins!(sql, options[:joins], scope)
...
and
def add_joins!(sql, joins, scope = :auto)
scope = scope(:find) if :auto == scope
merged_joins = scope && scope[:joins] && joins ? merge_joins(scope[:joins], joins) : (joins || scope && scope[:joins])
case merged_joins
when Symbol, Hash, Array
if array_of_strings?(merged_joins)
sql << merged_joins.join(' ') + " "
else
join_dependency = ActiveRecord::Associations::ClassMethods::InnerJoinDependency.new(self, merged_joins, nil)
sql << " #{join_dependency.join_associations.collect { |assoc| assoc.association_join }.join} "
end
when String
sql << " #{merged_joins} "
end
end
I hope this helps!