I'm trying to set up a new lab environment in MTM (2010) in TFS 2010 for a client. When I attempt to define a new environment I get to this screen and everything is disabled. Is this a permissions issue or perhaps was it TFS was not set up with Lab Environment?
Should I be able to add a machine? If I go to the test settings tabs, I get to the "Roles" section and it tells me there are no Test Environments, when I click the link it takes me back to this screen below.
We were able to create the controller yesterday and it shows up in the Controllers tab.
Experimenting futher on this tab I attempt to "Componse Virtual Environment" and this is the message it showed. "You cannot create a Virtual Environment"
I am not TFS Admin, and need to ask someone else to do this if indeed it's the issue. I'll look it up on google but am also looking for any tips.
The root cause was that I didn't know, at the time; when clicking on the "Machines" tab that you must highlight the controller and then click "Add to the Environment" once I did that I saw the machine pop up in the Environments window.
Related
I'm new to TFS admin panel.
my question is
How to get Last run result of Scheduled task with in Back up plan ?
I couldn't find the log path where this wizard reading status ? Could some one help me on this.
You can find it in TFS logs.
Open Administrator Console. Click Logs in the left Side navigation bar, click Open Logs Folder on the right.The default path(C:\ProgramData\Microsoft\Team Foundation\Server Configuration\Logs). Search the log you need.
For example:
The Back Up log format is TFS_Scheduled_Backups_Date(ex. 1026)_xxxxx.log
I had a problem with TFS that forced me to restore TFS to a new server. Everything is working fine except for the Warehouse, Analysis Services and the Reports.
Mainly the report keeps pointing to the old server, and when I try to edit it by pointing to new server TFS Administration Console returns the following message:
I do not wish to restore my old reports; I would like to create all the TFS reporting from scratch. Would someone please point me to the correct place to start?
Thanks!
To target the report to the new server, please follow the steps below:
1). Go the TFS Administration Console, go to Application Tier -> Reporting, then click the Edit link.
2). On the Reporting dialog, check the Use Reporting checkbox.
3). On the Warehouse tab, type the new server name on the Server field.
4). On the Analysis Service tab, specify the new server name in the Server field, Database name, and user account information.
5). On the Reports tab, type your new server name and click the Populate URLs button to have these reporting server URLs populated. Then type the user account information.
This was finally solved by clicking the "Specify non-default instance" checkbox, without entering any value in the following combobox. TFS has created the Warehouse and Analysis database by itself.
I am trying to create a new job in Jenkins. Even after giving 'item name' and type of project as 'freestyle', the 'OK' button is greyed out as shown in the attached screenshot.
I am using :
Windows 7 32 bit OS
Jenkins version 1.619
Can anyone tell how to solve this issue.
Thanks in advance.
Check if the problem is related to your particular browser configuration.
Try with addons/plugins disabled, or in another browser.
Check the Jenkins logs under the logs folder to see if there's anything meaningful.
As the "People" tab in Jenkins says, it "Includes all known “users”, including login identities which the current security realm can enumerate, as well as people mentioned in commit messages in recorded changelogs."
To ensure that you have been assigned with appropriate role, ask a person with admin or dev rights, to go to Manage Jenkins -> Manage and Assign Roles -> Assign Roles, and then add you as user with appropriate rights.
Easy way to fix this issue
Before :
The OK button is disabled:
After :
Choosing any items and then OK will enable:
I have two different bitbucket accounts set up. One is for work projects and one is for personal use. In BitBucket I have set up a repository in each of the accounts for different projects.
In SourceTree I have a few existing personal projects that are syncing up to my personal repository on SourceTree. In the left hand panel I can see my "Develop" branch for one of those personal projects and on the remote in BitBucket I can see the remote repo.
In SourceTree I don't see an obvious way to keep my two accounts separate. For example, I have added the work repo in SourceTree but when I try to commit an initial version of a work project it only gives me the option to commit my personal project branch.
How can I now add my work repo locally and sync only those work projects into repos on that work BitBucket account?
For SourceTree 2.0.2+ on Mac only with GitHub accounts:
Click from menu File-> New/Clone
In the dialog click settings icon.
In the resulting popup menu click Settings
It brings a dialog with listing user accounts. Add your additional account to the list.
Close the dialog.
Click remote button (next to local) on the tool in image shown below.
All your added accounts will be listed and their respective repositories with button to clone.
Hope this helps.
NOW on Windows, you do it in the Clone/Add/Create Repository dialog:
Click the "Hosted Repositories" button (internet icon)
Click "Edit Accounts"
Click "Add"
Well I have done this way:
Click on Settings
Click on Advance tab
Enter your Full name and Email address (Email should be match with your Bitbucket account)
Click on OK
Click on Close (To close current window)
Restart again
Note: You must have added account in Source tree. (Open Source tree -> Click on Setting icon < Right Top corner> -> Click Settings -> Add your Account -> Set as Default account)
Hope this would help you.
In Windows, you can do it by following steps:
Click on settings button ( right top corner). It will open dialog box.
Click on Advanced tab.
Uncheck the "Use global user settings".
Now you can enter username and email id for corresponding repository.
Click on OK to save changes.
If I understand your question correctly, you still need to do a little bit more set of your bitBucket accounts.
You can also test the BitBucket server to see which account you are logging in with.
ssh -v git#bitbucket.org
This link help me, follow these instructions here and you should be successful.
The key part you need is in you .git/config.
You'll need separate entries for each.
Use different SSH keys for different accounts on the same Git hosting
In Windows you may have more than one account (you can have even GitHub and BitBucket side by side). For example, assuming the account you have now in SourceTree is with BitBucket and you want to add your GitHub account to it as well, do the following:
From menu, choose File->New/Clone
In the Source Path/URL put the repository url for a repository you have on github
Wait for a few seconds and it asks you for username/password. (first, buttons might be disabled for example for entering your password. So wait for a few seconds first)
Add the new username and passowrd on github.
Now if you like you can cancel the clone.
For BitBucket account/repos, you can include the username you want to use as part of the git URL. SourceTree will then ask for the password for that username.
https://username#bitbucket.org/account/repo
If you've already cloned a repository with ssh on the Mac version, and you want to change the account for it, you can do this by changing the host name of the remote.
If you've let SourceTree modify your ˜/.ssh/config , then it will have added some entries starting with:
# --- Sourcetree Generated ---
Host <account name>-<service name>
...
Choose the <account name>-<service name> combination that you want to use and modify the path of your repository (in Remote Settings). Your new path will be something like the following format:
git#<account name>-<service name>:<account name>/<repository name>.git
(Actually, you can use this solution for working copies not cloned by SourceTree too.)
on windows the tool has a bug
no matter what I've tried from within the tool it was always using a previews git account which was cached somewhere...
so I searched all files where sourcetree was installed and I found a file C:\Users\WIDNOWS_USER\AppData\Local\Atlassian\SourceTree\userhosts
there I had cached the old git user/account name and it was driving me nuts in the app.
I updated this file, deleted the old account name and added the new one, restarted the tool and it started to work fine.
there's also a file
C:\Users\WIDNOWS_USER\AppData\Local\Atlassian\SourceTree\passwd
check that one too and if your cached account with passwd is there too clean it out, do not add here anything, the app will do it first time when you enter your password for the new acccount
I've been trying to follow http://devs.valence.desire2learn.com/2013/02/15/remote-plugins-the-bookwidget-sample-2 to make sure we can get the demo running before continuing with development, however we've run into the problem where the sample instructions given don't mention a "System Test Link", and d2l won't allow us to create the widget without one.
What is this, and how can this be solved?
Edit: The system the client is using is 10.1
Looks like the "community" decided that my additions to Sarah-Beth's answer were not appropriate. So here's my edited answer in it's entirety:
The System Test Link is not a required value in order to create a new Remote Plugin. This behavior has been verified against both Desire2Learn 10.1 and 10.2 environments.
A System Test Link value is required in order to run automated tests using the Test button on the Create a New Remote Plugin form. If you click the Test button without populating that field, you will be alerted that a value must be entered in the System Test Field in order to proceed. But this alert does not prevent you from creating your Remote Plugin by clicking Save.
The only required values for a new Remote Plugin are a launch point, a name, and a build type (course builder, widget).
Note. The UI for this management tool can be a bit confusing. When you enter your information and click Save, the tool's UX prompts the browser window to reset to the top of the displayed page: if your browser window is not long enough to contain the entire form, you will not see the little message above the Save button that tells you your configuration has changed, and there's no apparent change in the form's state. Accordingly, you may think that you haven't saved anything when, in fact you have.
Provide the config for your plugin, ensure you have a launch point, a name, and a build configuration selected (at least), and click Save. Once the browser resets the viewport to the top of the form's page, you should be able to click Cancel to back out of the form and see your new plugin in the list of plugins.
We are aware of the discomfort in this form and are taking steps to improve it's UX.
The System Test Link is not a required value in order to create a new Remote Plugin. This behavior has been verified against a Desire2Learn 10.2 environment.
A System Test Link value is required in order to run automated tests using the Test button on the Create a New Remote Plugin form. If you click the Test button without populating that field, you will be alerted that a value must be entered in the System Test Field in order to proceed. But this alert does not prevent you from creating your Remote Plugin by clicking Save.