I have an on-premise client-server application, which uses Google API. Until now we were happy with out-of-band flow (redirect_uri=urn:ietf:wg:oauth:2.0:oob), with manual copy-paste of authentication code, but Google is going to block it soon.
The problem is that Google requires a fixed list of allowed redirect URIs, but I do not know internal addresses of application server inside the intranets. For desktop client I just use http://localhost/xxx, but I do not know what to do with web clients.
The only solution I see is to set up a public authentication server. The client will pre-register the state token and the actual redirect uri on the authentication server before calling Google authentication. But I am not sure this is a good idea.
For the past 10+ days I've read an watched ALL the content I could find on understanding OAuth2 and OpenID Connect, only to find that many people disagree on the implementation, which really confuses me.
To my understanding, all the articles and examples I found assume you want access to eg. google calendar, profile info or emails if you eg. login with google, but I do NOT need to access other than my own API's - I only want to use Google, Facebook etc for logging in, and getting an id which I can link to my user in my own database - nothing more than that.
I'll try illustrate my use case and use that as an example.
A note on the diagram: the Authentication service could probably be built into the API Gateway - not that i matters for this example, since this is not about "where to do it", but "how to do it the best way" possible, for an architecture such as mine, where it's used for my own API's / Microservices, and not accessing Google, Facebook etc. external API's
If you can understand what I'm trying to illustrate with this diagram above, please tell me if I've misunderstood this.
The most basic requirements for this architecture you see here are:
Users can login with Google, Facebook, etc.
The same login will be used for all micro-services
OpenId user will have a linked account in the database
User access is defined in my own db, based on groups, roles and permissions
I do not intend to use external API's after the user is authenticated and logged in. No need for ever accessing a users calendar, email etc. so I really just need the authentication part and nothing else (proof of successful login). All user access is defined in my own database.
So a few fundamental questions comes to mind.
First of all, is OpenID Connect even the right tool for the job for authentication only (I'll have no use for authorization, since I will not need read/write access to google / facebook API's other than getting the ID from authenticating)?
People generally do not agree on whether to use the ID or Access token for accessing your own API's. As far as I understand the ID token is for the client (user-agent) only, and the access token is for eg. accessing google calendar, emails etc.... External API's of the OpenID Provider... but since I'll only be accessing my own API's, do I event need the access token or the ID token - what is the correct way to protect your own API's?
If the ID token is really just for the client, so it can show eg. currently logged in user, without going to the DB, I have 0 use for it, since I'll probably query the user from from the db and store it in redux for my react frontend app.
Dilemma: To store user details, groups, roles and permission inside JWT or not for API authorization?
By only storing the user identifier in the token, it means that I always allow authenticated users that has a valid token, to call endpoints BEFORE authorization and first then determine access based on the db query result and the permissions in my own database.
By storing more data about the user inside the JWT, it means that in some cases, I'd be able to do the authorization / access (group, role, permission) check before hitting the API - only possible with user info, groups, roles and permission stored inside a JWT issued upon login. In some cases it would not be possible due to eg. the CMS content access permissions being on a per-node level. But still it would mean a little better performance.
As you can see on the diagram I'm sending all API requests through the gateway, which will (in itself or with an authentication service) translate the opaque access token into some JWT with an identifier, so I can identify the user in the graph database - and then verify if the user has the required groups, roles and permissions - not from an external API, but from my own database like you see on the diagram.
This seems like a lot of work on every request, even if the services can share the JWT in case multiple services should need to cross call each other.
The advantage of always looking up the user, and his permissions in the db, is naturally that the moment the user access levels change, he is denied/granted access immediately and it will always be in sync. If I store the user details, groups, roles and permission inside a JWT and persist that in the client localstorage, I guess it could pose a security issue right, and it would be pretty hard to update the user info, groups, roles and permissions inside that JWT?
One big advantage of storing user access levels and info inside the JWT is of course that in many cases I'd be able to block the user from calling certain API's, instead of having to determine access after a db lookup.
So the whole token translation thing means increased security at the cost of performance, but is is generally recommended and worth it? Or is it safe enough to store user info and groups, roles, permissions inside the JWT?
If yes, do I store all that information from my own DB in the ID Token, Access token or a 3rd token - what token is sent to the API and determines if the user should be granted access to a given resource based on his permissions in the db? Do I really need an access token if I don't need to interact with the ID providers API? Or do I store and append all my groups, roles, permissions inside the ID token (that doesn't seem clean to me) issued by OpenID connect, and call the API and authorize my own API endpoints using that, even if some say you should never use the ID token to access an API? Or do I create a new JWT to store all the info fetched from my database, which is to be used for deciding if the user can access a given resource / API endpoint?
Please do not just link to general specs or general info, since I've already read it all - I just failed to understand how to apply all that info to my actual use case (the diagram above). Try to please be as concrete as possible.
Made another attempt to try and simply the flow:
The following answer does only apply for a OpenID Connect authentication flow with a 3rd party IDP (like Google). It does not apply for an architecture where you host your own IDP.
(There are some API gateways (e.g Tyk or Kong) which support OpenID Connect out of the box.)
You can use JWTs (ID token) to secure your APIs. However, this has one disadvantage. JWTs cannot be revoked easily.
I would not recommend this. Instead you should implement an OAuth2 authorization server which issues access tokens for your API. (In this case, you have two OAuth2 flows. One for authentication and one for authorization. The ID and access token from the IDP are used only for authentication.)
The following picture shows a setup where the API gateway and authentication/authorization server are two separate services. (As mentioned above, the authentication/authorization can also be done by the API gateway.)
The authentication flow (Authorization Code Grant) calls are marked blue. The authorization flow (Implicit Grant) calls are marked green.
1: Your web app is loaded from the app server.
2a: The user clicks on your login button, your web app builds the authorization URL and opens it. (See: Authorization Request)
2b: Because the user hasn't authenticated and has no valid session with your authorization server, the URL he wanted to access is stored and your authorization server responds with a redirect to its login page.
3: The login page is loaded from your authorization server.
4a: The user clicks on "Login with ...".
4b: Your authorization server builds the IDP authorization URL and responds with a redirect to it. (See: Authentication Request)
5a: The IDP authorization URL is opend.
5b: Because the user hasn't authenticated and has no valid session with the IDP, the URL he wanted to access is stored and the IDP responds with a redirect to its login page.
6: The login page is loaded from the IDP.
7a: The user fills in his credentials and clicks on the login button.
7b: The IDP checks the credentials, creates a new session and responds with a redirect to the stored URL.
8a: The IDP authorization URL is opend again.
(The approval steps are ignored here for simplicity.)
8b: The IDP creates an authorization and responds with a redirect to the callback URL of your authorization server. (See: Authentication Response)
9a: The callback URL is opened.
9b: Your authorization server extracts the authorization code from the callback URL.
10a: Your authorization server calls the IDP's token endpoint, gets an ID and access token and validates the data in the ID token. (See: Token Request)
(10b: Your authorization server calls the IDP's user info endpoint if some needed claims aren't available in the ID token.)
11a/b: Your authorization server queries/creates the user in your service/DB, creates a new session and responds with a redirect to the stored URL.
12a: The authorization URL is opend again.
(The approval steps are ignored here for simplicity.)
12b/+13a/b: Your authorization server creates/gets the authorization (creates access token) and responds with a redirect to the callback URL of your web app. (See: Access Token Response)
14a: The callback URL is opened.
14b: Your web app extracts the access token from the callback URL.
15: Your web app makes an API call.
16/17/18: The API gateway checks the access token, exchanges the access token with an JWT (which contains user infos, ...) and forwards the call.
A setup where the authorization server calls the API gateway is also possible. In this case, after the authorization is done, the authorization server passes the access token and JWT to the API gateway. Here, however, everytime the user infos change the authorization server has to "inform" the API gateway.
This is a very long question. But I believe most can be summarised by answering below,
To my understanding, all the articles and examples I found assume you want access to eg. google calendar, profile info or emails if you eg. login with google,
You do not necessarily use Access token (ID token in some occasions) to access the services offered by token issuer.You can consume tokens by your own APIs. What these Identity Providers (synonym to Authorization server, or IDP in shorthand) is to hold identities of end users. For example, typical internet have a Facebook account. With OAuth and OpenID Connect, the same user get the ability to consume your API or any OAuth/OIDC accepted service. This reduce user profile creation for end users.
In corporate domain, OAuth and OIDC serves the same purpose. Having a single Azure AD account lets you to consume MS Word as well as Azure AD's OIDC will issue tokens which can be used to Authorise against an in-house API or an third party ERP product (used in organization) which support OIDC based authentication. Hope it's clear now
A note on the diagram is that the Authentication service could probably be built into the API Gateway - not sure if that would be better?
If you are planning to implement an API gateway, think twice. If things are small scale and if you think you can maintain it, then go ahead. But consider about API managers which could provide most of your required functionalities. I welcome you to read this article about WSO2 API manger and understand its capabilities (No I'm not working for them).
For example, that API manager has built in authentication handling mechanism for OAuth and OIDC. It can handle API authentication with simple set of configurations. With such solution you get rid of the requirement of implement everything.
What if you can't use an API manager and has to do it yourself
OpenID Connect is for authentication. Your application can validate the id token and authenticate end user. To access APIs through API Gateway, I think you should utilise Access token.
To validate the access token, you can use introspection endpoint of the identity provider. And to get user information, you can use user-info endpoint.
Once access token is validated, API gateway could create a session for a limited time (ideally to be less or equal to access token lifetime). Consequent requests should come with this session to accept by API gateway. Alternatively, you can still use validated access token. Since you validated it at the first call, you may cache for a certain time period thus avoiding round trips to validations.
To validate user details, permission and other grants, well you must wither bind user to a session or else associate user to access token from API gateway at token validation. I'm also not super clear about this as I have no idea on how your DB logic works.
First Appreciate your patience in writing a very valuable question in this forum
we too have same situation and problem
I want to go through ,as images are blocked in our company in detail
Was trying to draw paralles to similar one quoted in the book
Advance API In Practise - Prabath Siriwerdena [ page 269]Federating access to API's Chapter. Definitely worth reading of his works
API GW should invoke Token Exchange OAUTH2.0 Profile to IDP [ provided the IDP should support TOken Exchange profile for OAUTH 2.0
The Absence of API Gateway , will result in quite bespoke development
for Access Control for each API Check
you land up in having this check at each of the api or microservice [ either as library which does work for you as a reusable code]
definitely will become a choking point.]
I am writing a REST API to be consumed by our internal applications. I need to login and logout users of the identity server using code grant via http requests
presentation
I need to know how to call the following endpoints:
/authorize (invoked from server-side)
/accesstoken (invoked from server-side)
/login
/logout
CASE:
Our company has many applications. I want one point of authentication which will happen in their company-x account like how you only need to login to atlassian account to access jira and confluence cloud. The REST API I'm working is for our front-end developers (as of now).
presentation
I cannot simply let the user login to WSO2 IS since they only need a module where they can manage their company-x profile and other basic stuffs. By this I think I have 2 options:
Customize WSO2 Identity Server UI and permissions. But the problem is, I still need an endpoint to get that id_token. I am also not sure if this is the right approach.
Know how to call /authorize, /accesstoken, /login and /logout endpoint and write my own minimal required UI and provide an endpoint that will respond the id_token
How about having a basic login page on front-end and use request path authenticator to get the authorization code/id_token.
Basically what this means is instead of redirecting the user to IS login page you can extract the username and password from the basic login page you created and send the authorization grant request along with the credentials.
so your authorization code request will be:
https://localhost:9443/oauth2/authorize?response_type=code&client_id=JqB4NGZLMC6L3n4jz094FMls2Joa&redirect_uri=https://localhost/callback&scope=openid§oken=<sec_token>
sec_token = base64encode(username:password)
You need to add basic-auth request path authenticator in your Service Provider configurations. This request should return you an authorization code. If you want an id_token simply use the implicit flow with request path authentication.
If you use code grant type, there will be a browser redirection from /authorize to /login. I don't think you can handle that by a REST call. (You might be able to handle that by calling url in location header of each 302 response. But I don't think it's a nice way to do this.) If you want to develop a REST API, I think password grant type will be more suitable.
I apologies in advance for incorrect use of oauth terms.
I have 4 "parties" as follows (intentionally not using oauth terms where possible):
End-user in a browser (javascript)
Our website (aspnet)
Our web api (aspnet)
Our auth server (aspnet utilising identityserver 4)
My usage scenario is that we only want the API to be called by a browser that has requested a page from the website first. Whilst the API doesn't release sensitive information, we would like to introduce a layer of complexity with regards to the API being spammed.
Our end user's will not be logged in.
I imagine such a flow being akin:
Browser requests a certain page from the website (one that will likely lead to js making an api call)
Website requests token from auth server
Auth server verifies token request came from website (the server itself)
Auth server returns a token to the website
Website returns page including the access token
Browser is able to make a request to api using token
Although convoluted, I believe this is at least similar to the Client Access Grant flow?
These tokens could then be throttled either by website or auth server.
Yes, I'm aware that this doesn't protect the api from numerous other vectors, but it does eliminate the simplest of cases which is all we're looking to achieve for now. I'll add, I didn't define this requirement, I'm simply trying to find a way to achieve it utilising techs out there instead of making the mistake of rolling anything of my own.
Could someone confirm/deny that there is an oauth flow I could use here? Any sample projects using the given flow and IdentityServer?
IdentityServer3 / non-aspnet[core/5] examples are fine, I can translate.
What you describe is the Client Credentials Grant where your website (client) gets an access token from identityserver (auth server). That access token can then be used to call endpoints on your web API (resource server).
The token is a bearer token and can be used by anyone who has it, so if you are comfortable with your website passing it back to a browser on an HTTP response, then it will work just fine.
I'm not sure what you mean by throttling the tokens - once minted they are valid for their lifetime. I guess you can keep the time-to-live very short to achieve the single usage you want though.
I'm working with a client who would like to authenticate with Active Directory Federated Services using SAML. As it was explained to me, the client ADFS server is the SAML identity provider and I simply need to provide a webview in the app for them to load a login page. Upon successful authentication the response should give authenticated metadata?
I've tried researching SAML and iOS and have only been able to find third party software which offers solutions, but no explanation of how this may be done without any third party integration into the app.
Resources I've looked into:
https://www.mutuallyhuman.com/blog/2013/05/09/choosing-an-sso-strategy-saml-vs-oauth2/
http://leandrob.com/2012/02/request-a-token-from-adfs-using-ws-trust-from-ios-objective-c-iphone-ipad-android-java-node-js-or-any-platform-or-language/
http://blog.centrify.com/ideal-solution-for-sso-across-native-mobile-applications/
https://msdn.microsoft.com/en-us/library/bb897402.aspx
Since I don't know anything about the content of this login page, how do I determine if the response has authenticated correctly? Additionally how do I extract and pull relevant information from this response into the app to store for future authenticated web service requests?
If the customer has ADFS 2012R2, it supports OAuth for public clients. Use the ADAL (Active Directory Authentication library) that supports ADFS. In this case, it will pop up a browser dialog window to do the authentication and then get a an authorization code. This code is then converted to an access token (JWT) which can then be used against a WebAPI.