Build docker ubuntu image by Dockerfile - docker

If command "docker run ubuntu bash" the container won't last.
but if I command "docker run -it ubuntu bash"
the container will make a pseudo-tty and keep this container alive.
my question is
is there any way I can make a Dockerfile for building an image based on ubuntu/centos then I just need to command "docker run my-image" and
the container will last.
apologize for my poor english, I don't know if my question is clear enough.
thanks for any response

There are three ways to run containers:
task containers - do one thing and then exit, like docker run ubuntu ls /
interactive containers - open a connection to the container with -it, like docker run -it ubuntu bash
background containers - keep a container running detached in the background with -d, like docker run -d ubuntu:14.04 ping localhost
Docker keeps the container running as long as there is an active process in the container. The first container exits when the ls command completes. The second container will exit when you exit the bash session. The third container will stay running as long as the ping process keeps running (note that ping has been removed from the recent Ubuntu images, which is why the example specifies 14.04).

Related

How to see the docker state instead of interacting with the shell?

I use following command to build web server
docker run --name webapp -p 8080:4000 mypyweb
When it stopped and I want to restart, I always use:
sudo docker start webapp && sudo docker exec -it webapp bash
But I can't see the server state as the first time:
Digest: sha256:e61b45be29f72fb119ec9f10ca660c3c54c6748cb0e02a412119fae3c8364ecd
Status: Downloaded newer image for ericgoebelbecker/stackify-tutorial:1.00
* Running on http://0.0.0.0:4000/ (Press CTRL+C to quit)
How can I see the state instead of interacting with the shell?
When you use docker run, the default behavior is to run the container detached. This runs in the background and is detached from your shell's stdin/out.
To run the container in the foreground and connected to stdin/out:
docker run --interactive --tty --publish=8080:4000 mypyweb
To docker start a container, similarly:
docker start --interactive --attach [CONTAINER]
NB --attach rather than -tty
You may list (all add --all) running containers:
docker container ls
E.g. I ran Nginx:
CONTAINER ID IMAGE PORTS NAMES
7cc4b4e1cfd6 nginx 0.0.0.0:8888->80/tcp nostalgic_thompson
NB You may use the NAME or any uniquely identifiable subset of the ID to reference the container
Then:
docker stop nostalgic_thompson
docker start --interative --attach 7cc4
You may check the container's logs (when running detached or from another shell) by grabbing the container's ID or NAMES
docker logs nostalgic_thompson
docker logs 7cc4
HTH!
Using docker exec is causing the shell to attach to the container. If you are comparing the behavior of docker run versus docker start, they behave differently, and it is confusing. Try this:
$ sudo docker start -a webapp
the -a flag tells docker to attach stdout/stderr and forward signals.
There are some other switches you can use with the start command (and a huge number for the run command). You can run docker [command] --help to get a summary of the options.
One other command that you might want to use is logs which will show the console output logs for a running container:
$ docker ps
[find the container ID]
$ docker logs [container ID]
If you think your container's misbehaving, it's often not wrong to just delete it and create a new one.
docker rm webapp
docker run --name webapp -p 8080:4000 mypyweb
Containers occasionally have more involved startup sequences and these can assume they're generally starting from a clean slate. It should also be extremely routine to delete and recreate a container; it's required for some basic tasks like upgrading the image underneath a container to a newer version or changing published ports or environment variables.
docker exec probably shouldn't be part of your core workflow, any more than you'd open a shell to interact with your Web browser. I generally don't tend to docker stop containers, except to immediately docker rm them.

Docker container keeps stopping after 'docker start'

I'm fairly new to Docker. I have a long Dockerfile that I inherited from a previous developer, which has many errors and I'm trying to get it back to a working point. I commented out most of the file except for just the first line:
FROM ubuntu:14.04
I did the following:
docker build -t pm . to build the image - this works because I can see the image when I execute docker images
docker run <image-id> returns without error or any message. Now I'm expecting the container to be created from the image and started. But when I do a docker ps -a it shows the container exited:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
b05f9727f516 f216cfb59484 "/bin/bash" About a
minute ago Exited (0) About a minute ago
lucid_shirley
Not sure why can't I get a running container and why does it keep stopping after the docker run command.
executing docker logs <container_id> displays nothing - it just returns without any output.
Your Docker image doesn’t actually do anything, container stop when finish its job. Since here no foreground process running it will start and then immediately stop.
To confirm your container have no issues, try to put below code into a docker-compose.yml(in same folder as the Dockerfile) and run docker-compose up, now you will see your container is running without exiting.
version: '3'
services:
my-service:
build: .
tty: true
Please have a look here Docker official tutorial it will guide you to how to work with docker.
try
docker run -it <image> /bin/bash
to run a shell inside the container.
That won't do much for you, but that'll show you what is happening: as soon as you exit the shell, it will exit the container too.
Your container basically doesn't do anything: it has an image of Ubuntu but doesn't have an ENTRYPOINT or a CMD command to run 'something'
Containers are ephemeral when ran: they run a single command and exit when the command finishes.
Docker container categorized following way.
Task Based : When container start it will start processing and it complete the process then exited.
Background container : It will wait for some request.
As you not provided your docker file so I assume that you have only one statement.
FROM ubuntu:14.04
your build statement create image with name pm.
Now you run
docker run pm
It will start container and stop as you did not provide any entry point.
Now try this
This is one command prompt or terminal.
docker run -it pm /bin/bash
Open another terminal or command prompt.
docker ps ( Now you will see there is one container).
If you want to see container that is continuously running then use following image.
(This is just a example)
docker run -d -p 8099:80 nginx
Above line run one container with Nginx image and when you open your browser http://localhost:8099 you can see the response.
Docker Containers are closely related to the process they are running. This process is specified by the "CMD" part on the Dockerfile. This process has the PID "1". If you kill it, your container is killed. If you haven't one, your container will stop instantly. In your case, you have to "override" your CMD. You can do it with a simple : "docker run -it ubuntu:18.04 bash". "-it" is mandatory since it allows the stdin to be attached to your container.
Have fun with docker.
Each instruction of Dockerfile is a layer within a container which perform some task. In your docker file It's just the loading the ubuntu which is completed when you run the docker within a fraction of seconds and exit since process finished. So if want to have your container running all the time then there should be a foreground process running in your docker.
For testing if you run
docker run <imageid> echo hi it will return the output means your container is fine.

How restart a stopped docker container

I launch a docker container from an image with the following command:
$ docker run -d myimage /bin/bash -c "mycommand"
When "mycommand" is finished, the container is stopped (I suppose it is stopped), but it is not deleted, because I can see it with this command:
$ docker ps -a
Is there any way to restart this container with the same parameters and keep data generated by mycommand?
Yes, when the initial command finish its execution then the container stops.
You can start a stopped container using:
docker start container_name
If you want to see the output of your command then you should add -ai options:
docker start -ai container_name
PS. there is a docker restart container_name but that is used to restart a running container - I believe that is not your case.
First, $ docker ps -a shows all containers (the ones that are running and the stopped ones), so that is the reason you are not seeing your stopped container listed.
Second, you can easily start a stopped container running:
$ docker start container_name
Once the container has been started, you can run your command by:
$ docker exec -it container_name bash -c "mycommand"
The stuff you create in your container will remain inside your container as long as it exists. If you want to keep data even if your container is removed you can use a volume.
It should be
$ docker restart container_id # OR
$ docker restart container_name
From the above picture we see one container is up and other status is Exited.
When a container is exited we can still start it back up, because a container stop doesn't mean that it's like dead or cannot be used again we can very easily stop and then start containers again at some point in the future. To start a container backup we can take it's ID and then execute docker start and paste the ID end.
sudo docker start container_id
command for exited container in the above picture will be.
sudo docker start -a bba606a95392
Out put:
By the way: While restarting a container we can not replace the default command, as soon as you started up with the default command is set for the container, for example if we start our container overriding the default command let's see what happened:
Docker is thinking we are trying to start and attach multiple container at the same time.
So when we up a container and let it exit, we can start it back up again which is going to reissue the default command that was used when the container was first created. It is part of docker container lifecycle.
Unfortunately, if you restart your VM/System and it shows
mysql-tls:5.7 "docker-entrypoint.s…" 18 hours ago Exited (255) 44 seconds ago
Answer :
Start the Container
docker start mysql
or
docker start your_container_name

How to keep the docker container up and running?

Here is my simple docker file
FROM java:8
EXPOSE 4000
now when I run it using the following command
sudo docker run --name hello dockerfile
and do docker ps -a it shows the status as exited. I just want to keep this container up and running so I can ssh into this container and probably transfer files and so on. It looks like containers are mainly used to run servers am I correct?
you can at least keep your container up with something like docker run -d hello sleep infinity but as said by René M, you should put in your Dockerfile something to do in your CMD or ENTRYPOINT, see the doc
https://docs.docker.com/engine/reference/builder/#cmd
and
https://docs.docker.com/engine/reference/builder/#entrypoint
That is realy simple.
Because your container is running nothing that last long. What happens is, that this container starts, has nothing to do and stops.
What you can do is:
Run the container in interactive mode with attached tty. This way your console enters the container after it's start, and let him run a tty, which is something to do and prevends the container from stopping. Then you can work inside this container, like installing an application. Doing this your work will be lost after stoping the container. But you can run docker commit on that container, which makes your changes persistent.
docker run -i -t --name hello dockerfile
Enhance your dockerfile with something usefull. Like copying an application into the container and provide a CMD command to run, when the container starts.
After this the container will last as long as your CMD command runs. If the command is a server or deamon application, the container will last for ever and will only stop when you stop him.

Difference between Running and Starting a Docker container

In practice to start a container I do:
docker run a8asd8f9asdf0
If thats the case, what does:
docker start
do?
In the manual it says
Start one or more stopped containers
This is a very important question and the answer is very simple, but fundamental:
Run: create a new container of an image, and execute the container. You can create N clones of the same image. The command is:
docker run IMAGE_ID and not docker run CONTAINER_ID
Start: Launch a container previously stopped. For example, if you had stopped a database with the command docker stop CONTAINER_ID, you can relaunch the same container with the command docker start CONTAINER_ID, and the data and settings will be the same.
run runs an image
start starts a container.
The docker run doc does mention:
The docker run command first creates a writeable container layer over the specified image, and then starts it using the specified command.
That is, docker run is equivalent to the API /containers/create then /containers/(id)/start.
You do not run an existing container, you docker exec to it (since docker 1.3).
You can restart an exited container.
Explanation with an example:
Consider you have a game (iso) image in your computer.
When you run (mount your image as a virtual drive), a virtual drive is created with all the game contents in the virtual drive and the game installation file is automatically launched. [Running your docker image - creating a container and then starting it.]
But when you stop (similar to docker stop) it, the virtual drive still exists but stopping all the processes. [As the container exists till it is not deleted]
And when you do start (similar to docker start), from the virtual drive the games files start its execution. [starting the existing container]
In this example - The game image is your Docker image and virtual drive is your container.
run command creates a container from the image and then starts the root process on this container. Running it with run --rm flag would save you the trouble of removing the useless dead container afterward and would allow you to ignore the existence of docker start and docker remove altogether.
run command does a few different things:
docker run --name dname image_name bash -c "whoami"
Creates a Container from the image. At this point container would have an id, might have a name if one is given, will show up in docker ps
Starts/executes the root process of the container. In the code above that would execute bash -c "whoami". If one runs docker run --name dname image_name without a command to execute container would go into stopped state immediately.
Once the root process is finished, the container is stopped. At this point, it is pretty much useless. One can not execute anything anymore or resurrect the container. There are basically 2 ways out of stopped state: remove the container or create a checkpoint (i.e. an image) out of stopped container to run something else. One has to run docker remove before launching container under the same name.
How to remove container once it is stopped automatically? Add an --rm flag to run command:
docker run --rm --name dname image_name bash -c "whoami"
How to execute multiple commands in a single container? By preventing that root process from dying. This can be done by running some useless command at start with --detached flag and then using "execute" to run actual commands:
docker run --rm -d --name dname image_name tail -f /dev/null
docker exec dname bash -c "whoami"
docker exec dname bash -c "echo 'Nnice'"
Why do we need docker stop then? To stop this lingering container that we launched in the previous snippet with the endless command tail -f /dev/null.
daniele3004's answer is already pretty good.
Just a quick and dirty formula for people like me who mixes up run and start from time to time:
docker run [...] = docker pull [...] + docker start [...]
It would have been wiser to name the command "new" instead of "run".
Run creates a container instance of an existing (or downloadable) image and starts it.

Resources