I am try to integrate the sonar with ant. My SonarQube server is running fine but when i am building the XML using ant i am getting the following error.
Property 'sonar.jdbc.url' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
[sonar:sonar] Property 'sonar.jdbc.username' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
[sonar:sonar] Property 'sonar.jdbc.password' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
[sonar:sonar] User cache: C:\Users\XYZ\.sonar\cache
[sonar:sonar] Load plugins index
[sonar:sonar] Load plugins index (done) | time=26ms
[sonar:sonar] Default locale: "en_US", source code encoding: "UTF-8" (analysis is platform dependent)
[sonar:sonar] Process project properties
BUILD FAILED
C:\Users\XYZ\git\ABCAPI\ant\build.xml:264: java.lang.IllegalStateException: Unable to load component class org.sonar.batch.scan.ProjectLock
I am new to sonar. I also added the the sonar.properties file and tried, but then also I am getting the error Unable to load component class org.sonar.batch.scan.ProjectLock.
I have tried placing the jdbc properties to build xml directly also but no gain.
I have seen previously discussion but they were of no help.
Related
Jenkin 2.289
Java 11
sonarqube-7.9.1
Here my Jenkins's job that use plugin "SonarQube scanner":
# Language
sonar.language=java
#BaseDir
sonar.projectBaseDir=/home/myUser/.jenkins/workspace/my-project-sonar/my-project
# Set modules IDs
sonar.modules=my-project-common,my-project-dalReader,my-project-mediation,my-project-reports,my-project-server,my-project-dal,my-project-dalWriter,my-project-sdn
# Modules inherit properties set at parent level
sonar.sources=./
#sonar.sources=**/src/main/**
#**/src/**
sonar.exclusions=**/generated-sources/**,**/src/test/**,**/*Header.java,./.svn,./my-project-it,./my-project-parent,./my-project-client
# By default, the base directory for a module is <current_dir>/<module_ID>.
common-model.sonar.projectBaseDir=common-model
my-project-common.sonar.projectBaseDir=my-project-common
my-project-sdn.sonar.projectBaseDir=my-project-sdn
sonar.junit.reportsPath=**/target/surefire-reports/*
# Comma-separated paths to directories containing the compiled bytecode files corresponding to your source files
sonar.java.binaries=**/target/classes/**
# Tells SonarQube where the unit tests code coverage report is
sonar.jacoco.reportPath=**/target/jacoco-ut.exec
# Encoding of the source files
sonar.sourceEncoding=UTF-8
But job get error:
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
INFO: Total time: 15.111s
INFO: Final Memory: 13M/550M
INFO: ------------------------------------------------------------------------
ERROR: Error during SonarScanner execution
ERROR: File myproject-server/server-deployment/pom.xml can't be indexed twice. Please check that inclusion/exclusion patterns produce disjoint sets for main and test files
ERROR:
ERROR: Re-run SonarScanner using the -X switch to enable full debug logging.
WARN: Unable to locate 'report-task.txt' in the workspace. Did the SonarScanner succeeded?
ERROR: SonarQube scanner exited with non-zero code: 2
Finished: FAILURE
You appear to be using the Maven SonarQube plugin's "sonar" goal, so you should not specify a "sonar.sources" value. That is done by the plugin. Maven uses the knowledge of the pom to provide parameters to the SonarQube scanner. Similarly for "sonar.java.binaries".
Once you get past this problem, you may discover you're not getting any test coverage acknowledged. I believe your use of the "sonar.jacoco.reportPath" property is obsolete. You can verify that first.
I am running SonarQube server v6.4 with v6.1 of the C# plugin. We have v3.0.0 of the SonarQube TFS extension installed in our TFS 2015 (Update 3) instance.
I am having issues with SonarQube scanning .cs files. There are a few warnings in the output of a few build steps that I'm not entirely sure what to make of. I haven't been able to find much on the messages.
Visual Studio Build step output:
OverrideCodeAnalysisProperties:
Skipping FxCop analysis: the SonarQube ruleset does not exist. Ruleset: C:\BuildAgents\Agent-01\_work\111\.sonarqube\conf\\SonarQubeFxCop-cs.ruleset
SonarQube Scanner for MSBuild - End Analysis (new) step output:
I'm seeing this at the beginning of the output for the step...
SonarQube Scanner for MSBuild 3.0
Default properties file was found at C:\BuildAgents\Agent-01\tasks\SonarQubeScannerMsBuildBegin\3.0.0\SonarQubeScannerMsBuild\SonarQube.Analysis.xml
Loading analysis properties from C:\BuildAgents\Agent-01\tasks\SonarQubeScannerMsBuildBegin\3.0.0\SonarQubeScannerMsBuild\SonarQube.Analysis.xml
Post-processing started.
17:58:54.965 17:58:54.965 WARNING: Failed to find the code coverage command line tool. Possible cause: Visual Studio is not installed, or the installed version does not support code coverage.
WARNING: File is not under the project directory and cannot currently be analysed by SonarQube. File: C:\Users\TFS2015Build\AppData\Local\Temp\.NETFramework,Version=v4.5.2.SqlClrAttributes.cs, project: C:\BuildAgents\Agent-01\_work\111\s\FunProject.Db\FunProject.Db.sqlproj
SONAR_SCANNER_OPTS is not configured. Setting it to the default value of -Xmx1024m
Calling the SonarQube Scanner...
INFO: Scanner configuration file: C:\BuildAgents\Agent-01\tasks\SonarQubeScannerMsBuildBegin\3.0.0\SonarQubeScannerMsBuild\sonar-scanner-3.0.3.778\bin\..\conf\sonar-scanner.properties
INFO: Project root configuration file: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\sonar-project.properties
INFO: SonarQube Scanner 3.0.3.778
INFO: Java 1.8.0_121 Oracle Corporation (64-bit)
INFO: Windows Server 2012 R2 6.3 amd64
INFO: SONAR_SCANNER_OPTS=-Xmx1024m
INFO: User cache: C:\Users\TFS2015Build\.sonar\cache
INFO: Load global settings
INFO: Load global settings (done) | time=125ms
INFO: User cache: C:\Users\TFS2015Build\.sonar\cache
INFO: Load plugins index
INFO: Load plugins index (done) | time=0ms
INFO: Download sonar-csharp-plugin-6.1.0.2359.jar
INFO: Download sonar-python-plugin-1.8.0.1496.jar
INFO: Download sonar-java-plugin-4.11.0.10660.jar
INFO: Download sonar-flex-plugin-2.3.jar
INFO: Download sonar-scm-git-plugin-1.2.jar
INFO: Download sonar-xml-plugin-1.4.3.1027.jar
INFO: Download sonar-php-plugin-2.10.0.2087.jar
INFO: Download sonar-scm-svn-plugin-1.4.0.522.jar
INFO: Download sonar-javascript-plugin-3.1.1.5128.jar
INFO: SonarQube server 6.4.0
INFO: Default locale: "en_US", source code encoding: "windows-1252" (analysis is platform dependent)
INFO: Process project properties
INFO: Load project repositories
INFO: Load project repositories (done) | time=141ms
INFO: Load quality profiles
INFO: Load quality profiles (done) | time=47ms
INFO: Load active rules
INFO: Load active rules (done) | time=281ms
INFO: Load metrics repository
INFO: Load metrics repository (done) | time=78ms
INFO: Publish mode
...then I'm seeing a set of output like this for each project in my solution:
INFO: ------------- Scan FunProject.Shared
INFO: Load server rules
INFO: Load server rules (done) | time=156ms
INFO: Initializer GenericCoverageSensor
INFO: Initializer GenericCoverageSensor (done) | time=0ms
INFO: Base dir: C:\BuildAgents\Agent-01\_work\111\s\FunProject.Shared
INFO: Working dir: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\.sonar\mod13
INFO: Source paths: FunProjectFolder1/FunProjectClassFile1.cs, FunProjectFolder2/FunProjectClassFile2.cs, ... Properties/AssemblyInfo.cs, packages.config
INFO: Source encoding: UTF-8, default locale: en_US
INFO: Index files
INFO: Analyzer working directory does not exist
INFO: 12 files indexed
INFO: Quality profile for cs: Sonar way
INFO: Sensor C# [csharp]
INFO: Importing analysis results from C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs
WARNING: WARN: Protobuf file not found: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs\encoding.pb
INFO: Importing Roslyn report
WARNING: WARN: Protobuf file not found: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs\metrics.pb
WARNING: WARN: Protobuf file not found: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs\token-type.pb
WARNING: WARN: Protobuf file not found: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs\symrefs.pb
WARNING: WARN: Protobuf file not found: C:\BuildAgents\Agent-01\_work\111\.sonarqube\out\FunProject.Shared_3389\output-cs\token-cpd.pb
INFO: Sensor C# [csharp] (done) | time=78ms
INFO: Sensor SonarJavaXmlFileSensor [java]
INFO: Sensor SonarJavaXmlFileSensor [java] (done) | time=0ms
INFO: Sensor Analyzer for "php.ini" files [php]
INFO: Sensor Analyzer for "php.ini" files [php] (done) | time=0ms
Is there something obvious that I'm missing?
Edit:
I am using Visual Studio Professional, so the warning about code coverage is caused by the fact that I do not have Visual Studio Enterprise installed on the build server.
Suggest you first try to analyze solution in the command line locally to see if it works.
Run your analysis by executing the following commands from the root directory of the project:
SonarQube.Scanner.MSBuild.exe begin /k:"org.sonarqube:sonarqube-scanner-msbuild" /n:"Project Name" /v:"1.0"
MSBuild.exe /t:Rebuild
SonarQube.Scanner.MSBuild.exe end
This will narrow down it's your environment issue or just related to your build definition settings.
According to the error message:
WARNING: Failed to find the code coverage command line tool. Possible
cause: Visual Studio is not installed, or the installed version does
not support code coverage.
Double check your VS edition on your build agent. Note: you need Visual Studio Enterprise edition for code coverage. Have a look at this page and expand the 'testing tools' section. Code coverage is only listed for the Enterprise edition.
Besides, you could also enable verbose Debug Mode with system.debug=true to get a more detail build log for troubleshooting.
I downgraded the C# plugin from 6.1 (build 2359) to 5.11 (build 1721), and the problem went away. There must be some issue with that release that was causing the issue.
Using Jenkins 1.642.2 for code analysis with SonarQube 5.6.1 for all my maven projects.
When I use maven goal sonar:sonar they take more time to analyse files (more than 7 seconds by file) :
[INFO] Sensor SCM Sensor
[INFO] SCM provider for this project is: svn
[INFO] 1079 files to be analyzed
[INFO]
[INFO] 2/1079 files analyzed
[INFO] 3/1079 files analyzed
[INFO] 4/1079 files analyzed
[INFO] 5/1079 files analyzed
When I use the SonarQube Scanner with this config :
then i have this error :
WARN: Property 'sonar.jdbc.url' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
WARN: Property 'sonar.jdbc.username' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
WARN: Property 'sonar.jdbc.password' is not supported any more. It will be ignored. There is no longer any DB connection to the SQ database.
INFO: User cache: /var/lib/jenkins/.sonar/cache
INFO: Load plugins index
INFO: Load plugins index (done) | time=43ms
INFO: SonarQube server 5.6.1
INFO: Default locale: "en_US", source code encoding: "UTF-8" (analysis is platform dependent)
INFO: Process project properties
INFO: ---------------------------------------------------------------------- --
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
INFO: Total time: 1.621s
INFO: Final Memory: 39M/132M
INFO: ------------------------------------------------------------------------
ERROR: Error during SonarQube Scanner execution
ERROR: You must define the following mandatory properties for 'Unknown': sonar.projectKey, sonar.projectName, sonar.projectVersion, sonar.sources
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
Build step 'Execute SonarQube Scanner' marked build as failure
Finished: FAILURE
My settings file :
<profile>
<id>sonar</id>
<activation>
<activeByDefault>true</activeByDefault>
</activation>
<properties>
<sonar.jdbc.url>
jdbc:mysql://11.230.5.88:3306/sonar
</sonar.jdbc.url>
<sonar.jdbc.username>sonar</sonar.jdbc.username>
<sonar.jdbc.password>sonar</sonar.jdbc.password>
<!-- Optional URL to server. Default value is http://localhost:9000 -->
<sonar.host.url>
http://sonarqube-groupe.com/
</sonar.host.url>
</properties>
</profile>
Any idea to solve this problem because i have a problem to understand the new sonarqube use
i must make a sonar-project.properties file for the maven project?
You can and should still analyze with Maven, using a Build Step. As stated in the docs, you should first "Enable injection of SonarQube server configuration" at the global configuration level, and then in your build enable the Build Environment Option "Prepare SonarQube Scanner environment". Then you can set your Maven goal to the following:
$SONAR_MAVEN_GOAL -Dsonar.host.url=$SONAR_HOST_URL -Dsonar.login=$SONAR_AUTH_TOKEN
I am trying to integrate SonarQube to generate report on my iOS project,
I am using Objective-C Sonar plugin
When i run ./run-sonar.sh
OCLint generates a compile_commands.json file in my root directory.
and after that getting following error
11:24:39.782 INFO - Processing OCLint report /Users/.......app/./sonar-reports/oclint.xml
11:24:39.899 ERROR - Reporting 1073 violations.
INFO: ------------------------------------------------------------------------
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
Total time: 16.240s
Final Memory: 6M/86M
INFO: ------------------------------------------------------------------------
ERROR: Error during Sonar runner execution
org.sonar.runner.impl.RunnerException: Unable to execute Sonar
at org.sonar.runner.impl.BatchLauncher$1.delegateExecution(BatchLauncher.java:91)
at org.sonar.runner.impl.BatchLauncher$1.run(BatchLauncher.java:75)
at java.security.AccessController.doPrivileged(Native Method)
at org.sonar.runner.impl.BatchLauncher.doExecute(BatchLauncher.java:69)
at org.sonar.runner.impl.BatchLauncher.execute(BatchLauncher.java:50)
at org.sonar.runner.api.EmbeddedRunner.doExecute(EmbeddedRunner.java:102)
at org.sonar.runner.api.Runner.execute(Runner.java:100)
at org.sonar.runner.Main.executeTask(Main.java:70)
at org.sonar.runner.Main.execute(Main.java:59)
at org.sonar.runner.Main.main(Main.java:53)
Caused by: The rule 'OCLint:ivar assignment outside accessors or init' does not exist.
Can any one help me on this issue?
Thanks
AMR
Thnaks
I had a similar error. My sonar server had two objective-c code analyser plugin. The Sonar Plugin for Objective C (free) and SonarSource Objective-C plugin (commercial)
When I removed (uninstalled) one of the plugin from sonar server the error stopped to occur
I had a similar error too with the last version of this plugin which is a fork of the one you used.
I downgrade my OCLint version from 0.11 to 0.10.1 and everything work perfectly.
It seems that the OCLint rules defined in the plugin was different of the OCLint version installed on my server.
I am not sure what version of the objective-c-sonar plugin that you were using.
I solved similar issue before.
Goto ${SONAR_INSTALLATION_FOLDER}/extensions/plugins/, copy the sonar-objective-c-plugin-${version}.jar to somewhere else.
unzip the jar file, and edit below file
org/sonar/plugins/objectivec/profile-oclint.xml
Add the rule you are missing following the layout of the xml file,
may be look similar below
<rule>
<repositoryKey>OCLint</repositoryKey>
<key>ivar assignment outside accessors or init</key>
</rule>
And edit another file org/sonar/plugins/objectivec/rules-oclint.xml
<rule>
<key>ivar assignment outside accessors or init</key>
<name>ivar assignment outside accessors or init</name>
<priority>MAJOR</priority>
<description>ivar assignment outside accessors or init</description>
</rule>
And then using zip to package the files unpacked as the new jar file.
Override the original plugin jar file in ${SONAR_INSTALLATION_FOLDER}/extensions/plugins/, restart the sonar, issue could be gone.
Repeat the step for all similar issues you encountered.
I am using SonarQube Runner 2.4 at jenkins since today but the analysis fail with the message:
SonarQube Runner 2.4
Java 1.7.0_51 Oracle Corporation (64-bit)
INFO: Runner configuration file: /.jenkins/tools/hudson.plugins.sonar.SonarRunnerInstallation/Sonar_Runner_2.4/conf/sonar-runner.properties
INFO: Project configuration file: NONE
INFO: Default locale: "en_US", source code encoding: "ISO-8859-1" (analysis is platform dependent)
INFO: Work directory: /.jenkins/workspace/Sonar/.sonar
INFO: SonarQube Server 4.3.2
23:21:42.176 INFO - Load batch settings
23:21:42.160 INFO - User cache: /.sonar/cache
23:21:42.270 INFO - Install plugins
23:21:43.322 INFO - Install JDBC driver
23:21:43.329 INFO - Create JDBC datasource for jdbc:mysql://xxx
23:21:45.505 INFO - Initializing Hibernate
INFO: ------------------------------------------------------------------------
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
Total time: 5.214s
Final Memory: 21M/429M
INFO: ------------------------------------------------------------------------
ERROR: Error during Sonar runner execution
ERROR: Unable to execute Sonar
ERROR: Caused by: You must define the following mandatory properties for ‚com.mypackage:MyProject: sonar.sources
ERROR:
ERROR: To see the full stack trace of the errors, re-run SonarQube Runner with the -e switch.
ERROR: Re-run SonarQube Runner using the -X switch to enable full debug logging.
Build step 'Invoke Standalone Sonar Analysis' marked build as failure
[BFA] Scanning build for known causes...
[BFA] Done. 0s
Notifying upstream projects of job completion
Finished: FAILURE
If I add the property "MyProject.sonar.sources=src" In the project properties in Jenkins (I use "Invoke Standalone Sonar Analysis"). I will receive the error message
ERROR: Caused by: Findbugs needs sources to be compiled. Please build project before executing sonar and check the location of compiled classes.
This means the sonar-project.properties (/.jenkins/workspace/Deploy/MyProject/sonar-project.properties) is not read or used because there are all values defined:
sonar.language=java
sonar.projectName=MyProject
sonar.projectVersion=0.1
sonar.binaries=bin
sonar.projectDescription=
sonar.projectKey=MyProjectKey
sonar.sources=src
When sonar is executed I can see the correct path to MyProject where :
-DMyProject.sonar.projectBaseDir=/.jenkins/workspace/Deploy/MyProject
Or does the name of sonar-project.properties changed?
Please build the project in the release mode. After the build happens you will get the dll's produced somewhere. you have to point to that location.