I have a scenario where a DTO is used for POST and PUT operations. I am currently using Spring MVC (RESTful). I would like to reuse DTO in multiple cases. So I want to avoid any annotations in the DTO. I prefer them on the controller instead. I may be wrong but, please advise.
Below is the scenario:
There are three fields id, a, b in the DTO. For POST operation a and b are required and for PUT operation all three are required. I am currently using attribute "required" in #ApiModelProperty annotation (in model).
a. How do I enforce conditional required for "id" incase of PUT operation using #ApiModelProperty?
b. I would like to have something on the controller itself where I can specify all conditions instead on the DTO itself. That way I can reuse DTO in many scenarios. I tried #ApiImplicitParams with paramType as "body". If I do this, I am seeing multiple body fields instead of one in swagger html documentation.
Any suggestions would be greatly helpful.
Thanks!!
Related
I am trying to reuse my model in my MVC project. However in some instances the model needs to have all its fields filled and in others only some fields need to be filled. I applied [Required] attribute to fields that are required in all cases. But what about others? Is there a way to make those other fields required in just certain instances?
Thanks for any ideas.
You could do it a "hacky" kind of way by creating a custom validator that you trigger with, say, another field in the model. But that seems odd. I'd really opt for having a custom VM for each of the cases: one where required, one where not. You can then use one of many tools to map from your VM to your Model if you're concerned with having to copy fields over. Look at Automapper and ServiceStack.Text (which has a TranslateTo method) for two examples of simple mappers.
I need to add two kinds of verification to a comment form I’ve built. Some type on human verification and some type of email verification. Would putting these into Action Filters be a good way to go?
I don’t want to use Google’s recapture, I don’t like using it myself when I’m asked too and I have seen some other clever options around the place but that’s for another thread.
Is this the type of thing I should/could put into Action Filters???
Cheers,
Mike.
I found the answer to this thanks to a great guy at asp.net, so I will quote him, CodeHobo said,
“You implement this by using the concept of a buddy class. Basically you create another class with public properties that match the properties of your EF model. You apply the validation attributes to your "buddy class".
Then create a partial class to match your EF model (EF generates partial classes for all models). You add an attribute to your partial that points to your "buddy class". Basically you are telling mvc to use the validations in the associated class instead of the EF model.
Take a look at this
http://www.asp.net/mvc/tutorials/older-versions/models-(data)/validation-with-the-data-annotation-validators-cs”
This worked for me and was amazingly simple to implement thanks to MVC.
Background
I have a payment page where the user can select from a list of existing payment methods, or specify a new one. The dropdown presents options such as:
Visa - ******1234 (Saved)
Mastercard - ******9876 (Saved)
[New Credit Card ...]
[New Electronic Check ...]
Using jQuery, I toggle hidden DIVs that contain either an informational table (in the case of options 1 or 2 for saved payment methods) or a form (in the case of the [new] options).
I am using a strongly typed class as my view model which contains (among simple types) a CreditCard class and a Check class. Each of these classes uses data annotation validators, as they are used in other parts of the site.
Problem
The problem comes in when the user submits the form. I would like to use model binding to handle the mapping of POST values, but I need the binding and/or validation to fire depending on which option the user selected. For example, if the user selects option 1 or 2 from the list above, I don't want the model validation (or maybe even the binding itself) to fire for the CreditCard or Check objects.
I have researched the possibilities of creating a custom model binder using IModelBinder as well as extending the DefaultModelBinder and just overriding some of the methods. However, I am unsure as to which method is better, and, if extending DefaultModelBinder, which would be the appropriate method to override.
The logic would be fairly simple:
If the user selected one of the existing payment methods, no validation on the CreditCard or Check are required.
If the user selected one of the options to create a new payment method, then only the selected method (CreditCard or Check) needs to be bound and validated
It feels as if extending the DefaultModelBinder is the way to go, as I would like most of the heavy lifting to be done by the framework without the need to create a custom binder from scratch. However, when looking at the available methods to override, it's not clear which is the best one(s):
BindProperty - The problem here is that I basically need to look at one of the properties to determine what other properties should be bound. I don't think I can control the order in which the incoming properties are bound, and I wouldn't want to rely on the order they are set in the HTML form.
OnModelUpdated - By this point, it's too late. The binding validation from the data annotations has been triggered and the ModelState has been updated. I would have to loop through the ModelState and remove the errors that are not relevant.
OnPropertyValidating - At first I thought this is where I should look, but even returning TRUE for all properties (as a test) causes the ModelState to contain binding errors.
I have come across this scenario in other aspects of the application and decided to split up functionality into separate controller/actions to simplify the process. However, I would like to have a better understanding of how to approach more complex UI problems, particularly related to the MVC model binding features.
Any help on this subject would be greatly appreciated.
All the possible values are stored in a dropdown list. Using jQuery, I toggle the form (for a new payment method) and the display (for an existing method)
I have decided to try to circumvent model binding altogether and use FormCollection, IValueProvider, and TryUpdateModel inside my controller action.
Your issue sounds way to specialized to be placed in the default ModelBinder.
The ModelBinder is this seductress that lures you in on the pretense that she can solve all of your problems. But then you start merging ModelState's together and going off to do crazy things with nested objects lists and before you know it she slaps you with divorce papers and takes everything but your bones.
MVC 3 holds some promise to provide a more extensible ModelBinder but from my own personal experience unless its super simple what you need to change, such as empty texboxes becoming "" instead of null, than stay clear away from your own implementation.
The alternative approach is to use the existing ModelBinder functionality piecemeal and using things like Ignore method parameters to clean things up:
if( myModel.IsNewPayment )
UpdateModel( myModel.Payment, "exclude everything else" );
A lot of what your proposing to stuff into the model binder is really business logic too that should be in another layer. I've done some crazy things with my own ModelBinder and now regret every line of code I've written in there. Maybe its just me but your really bending the rules and completely trashing the "single responsibility principal" by putting business and payment logic in there.
When I started using xVal for client-side validation, I was only implementing action methods which used domain model objects as a viewmodel or embedded instances of those objects in the viewmodel.
This approach works fine most of the time, but there are cases when the view needs to display and post back only a subset of the model's properties (for example when the user wants to update his password, but not the rest of his profile data).
One (ugly) workaround is to have a hidden input field on the form for each property that is not otherwise present on the form.
Apparently the best practice here is to create a custom viewmodel which only contains properties relevant to the view and populate the viewmodel via Automapper. It's much cleaner since I am only transferring the data relevant to the view, but it's far from perfect since I have to repeat the same validation attributes that are already present on the domain model object.
Ideally I'd like to specify the Domain Model object as a meta class via a MetaData attribute (this is also often referred to as "buddy class"), but that doesn't work since xVal throws when the metadata class has properties that are not present on the viewmodel.
Is there any elegant workaround to this? I've been considering hacking the xVal sourcecode, but perhaps there is some other way I have overlooked so far.
Thanks,
Adrian
Edit: With the arrival of ASP.NET MVC 2, this is not only a problem related to validation attributes anymore, but it also applies to editor and display attributes.
This is the quintessential reason why your input screens should not be tightly coupled to your model. This question actually pops up here on the MVC tag about 3-4 times a month. I'd dupe if I could find the previous question and some of the comment discussion here is interesting. ;)
The issue your having is you're trying to force two different validation contexts of a model into a single model which fails under a large amount of scenarios. The best example is signing up a new user and then having an admin edit a user field later. You need to validate a password on a user object during registration but you won't show the password field to the admin editing the user details.
The choices for getting around these are all sub-optimal. I've worked on this problem for 3 projects now and implementing the following solutions has never been clean and usually frustrating. I'm going to try and be practical and forget all the DDD/db/model/hotnessofthemonth discussions everybody else is having.
1) Multiple View Models
Having viewmodels that are almost the same violates the DRY principal but I feel the costs of this approach are really low. Usually violating DRY amps up maintenance costs but IMHO the costs for this are the lowest and don't amount to much. Hypothetically speaking you don't change how max number characters the LastName field can have very often.
2) Dynamic Metadata
There are hooks in MVC 2 for providing your own metadata for a model. With this approach you could have whatever your using to provide metadata exclude certain fields based on the current HTTPRequest and therefore Action and Controller. I've used this technique to build a database driven permissions system which goes to the DB and tells the a subclass of the DataAnnotationsMetadataProvider to exclude properties based values stored in the database.
This technique is working great atm but the only problem is validating with UpdateModel(). To solve this problem we created a SmartUpdateModel() method which also goes to the database and automatically generates the exclude string[] array so that any non-permissisable fields aren't validated. We of course cached this for performance reasons so its not bad.
Just want to reiterate that we used [ValidationAttributes] on our models and then superceeded them with new rules on runtime. The end result was that the [Required] User.LastName field wasn't validated if the user didn't have permission to access it.
3) Crazy Interface Dynamic Proxy Thing
The last technique I tried to was to use interfaces for ViewModels. The end result was I had a User object that inherited from interfaces like IAdminEdit and IUserRegistration. IAdminEdit and IUserRegistration would both contain DataAnnotation attributes that performed all the context specific validation like a Password property with the interfaces.
This required some hackery and was more an academic exercise than anything else. The problem with 2 and 3 is that UpdateModel and the DataAnnotationsAttribute provider needed to be customized to be made aware of this technique.
My biggest stumbling block was I didn't ever want to send the whole user object to the view so I ended up using dynamic proxies to create runtime instances of IAdminEdit
Now I understand this is a very xVal specific question but all of the roads to dynamic validation like this lead to customization of the internal MVC Metadata providers. Since all the metadata stuff is new nothing is that clean or simple to do at this point. The work you'd have to do to customize MVC's validation behavior isn't hard but requires some in depth knowledge of how all of the internals work.
We moved our validation attributes to the ViewModel layer. In our case, this provided a cleaner separation of concerns anyway, as we were then able to design our domain model such that it couldn't get into an invalid state in the first place. For example, Date might be required on a BillingTransaction object. So we don't want to make it Nullable. But on our ViewModel, we might need to expose Nullable such that we can catch the situation where the user didn't enter a value.
In other cases, you might have validation that is specific per page/form, and you'll want to validate based on the command the user is trying to perform, rather than set a bunch of stuff and ask the domain model, "are you valid for trying to do XYZ", where in doing "ABC" those values are valid.
If ViewModels are hypothetically being forced upon you, then I recommend that they only enforce domain-agnostic requirements. This includes things like "username is required" and "email is formatted properly".
If you duplicate validation from the domain models in the view models, then you have tightly coupled the domain to the UI. When the domain validation changes ("can only apply 2 coupon per week" becomes "can only apply 1 coupon per week"), the UI must be updated. Generally speaking, this would be awful, and detrimental to agility.
If you move the validation from the domain models to the UI, you've essentially gutted your domain and placed the responsibility of validation on the UI. A second UI would have to duplicate all the validation, and you have coupled two separate UI's together. Now if the customer wants a special interface to administrate the inventory from their iPhone, the iPhone project needs to replicate all the validation that is also found in the website UI.
This would be even more awful than validation duplication described above.
Unless you can predict the future and can rule out these possibilities, only validate domain-agnostic requirements.
I don't know how this will play for client-side validation, but if partial validation is your issue you can modify the DataAnnotationsValidationRunner discussed here to take in an IEnumerable<string> list of property names, as follows:
public static class DataAnnotationsValidationRunner
{
public static IEnumerable<ErrorInfo> GetErrors(object instance, IEnumerable<string> fieldsToValidate)
{
return from prop in TypeDescriptor.GetProperties(instance).Cast<PropertyDescriptor>().Where(p => fieldsToValidate.Contains(p.Name))
from attribute in prop.Attributes.OfType<ValidationAttribute>()
where !attribute.IsValid(prop.GetValue(instance))
select new ErrorInfo(prop.Name, attribute.FormatErrorMessage(string.Empty), instance);
}
}
I'm gonna risk the downvotes and state that there is no benefit to ViewModels (in ASP.NET MVC), especially considering the overhead of creating and maintaining them. If the idea is to decouple from the domain, that is indefensible. A UI decoupled from a domain is not a UI for that domain. The UI must depend on the domain, so you're either going to have your Views/Actions coupled to the domain model, or your ViewModel management logic coupled to the domain model. The architecture argument is thus moot.
If the idea is to prevent users from hacking malicious HTTP POSTs that take advantage of ASP.NET MVC's model binding to mutate fields they shouldn't be allowed to change, then A) the domain should enforce this requirement, and B) the actions should provide whitelists of updateable properties to the model binder.
Unless you're domain is exposing something crazy like a live, in-memory object graph instead of entity copies, ViewModels are wasted effort. So to answer your question, keep domain validation in the domain model.
I understand annotating class properties with the basic required and minimum length and getting all the benefits of the asp.net mvc server side and client side validation.
However does anyone have a link that shows how you combine this 'base' validation with more complex business rules. How would I run business rule functions, such as for example, has the customer ordered anything in the last year (database hit required) and still use the same DataAnnotation and mvc validation plumbing?
Goal : Don't want two ways of generating and outputting validation methods.
From http://msdn.microsoft.com/en-us/library/dd901590%28VS.95%29.aspx:
To create customized validation checks, you can either create a class that derives from the ValidationAttribute class or create a method that performs the validation check and reference that method when applying the CustomValidationAttribute to the data member. When you create a class that derives from ValidationAttribute, override the IsValid method to provide the logic for your customized validation check.
There appears to be example code there.
Data Annotation run before your action is invoked. Then, regardless whether the validation succeded or not, the action is still called. If the DA detected invalid data, your ModelState will be invalid.
Once here, you can still do any validation you want, for your business rules, as you would normally do without the data annotation, if you want to. In your action, you can add errors to the ModelState even if the Data Annotation validation passed.
In this case, you add your errors with ModelState.addError, and those errors are added to any error provided by the DA. So in your View it doesn't matter where the error comes from.
Or, if your rules are general, you can write your own annotation tags. The Data Annotation thing is distributed with its source, so you have full control on it.
You could use VAB (Application Validation Block) from the Enterprise Library 5 of Microsoft that actually based on the DataAnnotations class but u do your complex bussiness logic very easily through configuration...
i'd suggest you check it out...
Have a look at following article, where you can use DataAnnotations Multiple Times On Same Field, Compare N number of properties and N number of values....
http://www.codeproject.com/KB/validation/MultipleDataAnnotations.aspx