Hy, I want to ask if there is any possibility to have 2 types of authotization in the same API, for 2 separate endpoints, one to use client_credentials and the other to use authorization_code? The code is in RAML.
Short answer: Yes, it's possible.
The API should only care about the access token (JWT) & claims (user id, etc.) returned from your auth provider, not the authentication method. (unless it's a business requirement)
User can authenticate himself via a login flow and the receives an authorization code, which is then exchanged for a access token. This is authorization_flow in essence.
Or the request can be authenticated using client id + secret and uses the received access token (client_credentials flow). This access token doesn't contain a user claim (because it's usually done in a machine-to-machine communication).
So unless the API relies on user claims being present in access token, it doesn't matter how you retrieve the it, as long as it's valid.
While starting to integrate auth0, I came across this article
So its clear that to secure apis, all we need is the access_token and that is sent with each http request in the request Authorization header(Bearer scheme).
But then auth0(and possibly other providers) also send an Id_token that contains information about the user. My confusion is that how do I use this id_token to pass user information to my api. ( I have a spa running front end that authenticates to auth0 and gets these 2 tokens).
I can ofc call the userInfo end point in my api to get user info. But then wouldn't this defeat the purpose of the Id tokens?
The ID Token is consumed by the application and the claims included,
are typically used for UI display. It was added to the OIDC
specification as an optimization so the application can know the
identity of the user, without having to make an additional network
requests.
So my question is how do I access user profile in my api using id tokens?
"My confusion is that how do I use this id_token to pass user information to my api"
for that confusion, you just pass your JWT token. while generating JWT token, you need to add user information in payload part in JWT token. When your api get the JWT token, just check your JWT token is correct or not by the use of secret key and if correct, you can get data. How to get is just go from that JWT Authentication for Asp.Net Web Api
ID token is sent from the authorization server as a part of OIDC protocol. The purpose of this is to authenticate the user to your client application (SPA in this case). i.e. to let your API or the application know which particular user authorized the client to access a certain resource on its behalf.
Best way to use the ID token is by decoding and verifying it using a library. This will allow you to verify the signature of the token and any other claim that is included in the token (you can add custom claims to the tokens). Validation of those claims can be used to determine identity of the user and match with the user profile in your API. You will have to check the documentation related to your IdP(auth0) to figure out how to add new claims that are used by the user profile in your API.
I am using a variant of the in-memory clients defined in the reference IdentityServer4 demo project and after I log into the Identity Server and get redirected, the URI is such that the id_token and access_token are the same exact JWT.
Is this a sensible behavior? Why would you want the id_token and access_token to be the same, ever? Maybe if you don't care about the access_token?
Not sure what you mean same exact JWT. But both access token and ID token can come as JWT tokens.
One good example is OAuth flow of Azure AD. According to the document successful token response return an access token and an id token (yes, Azure does send one for OAuth auth. code flow) both in JWT format (reference). But their contents could be different. For example, one could be a signed JWT and other could not be.
Reason for the usage of JWT is due to self-contained nature of them. For example, token validations can be done easily from client application end as well as protected API end.
Usually if both access token and ID token are JWTs they could be differ by claims. For example audience claim ("aud") could be different depending on intended audience of token.
I'm building a system with OIDC and OAuth 2.0 (using Auth0), and I'm unsure how to properly use the id_token and access_token. Or rather, I'm confused about which roles to assign to the various services in my setup.
I have a fully static frontend-application (single-page app, HTML + JS, no backend) that ensures that the user is authenticated using the implicit flow against Auth0. The frontend-application then fetches data from an API that I am also building.
Now, which is right?
The frontend SPA is the OAuth client application
My API service is an OAuth resource server
...or:
The frontend and my API service are both the client application
If both my frontend and backend API can be considered to be the client, I see no real harm in using the id_token as the bearer token on requests from my frontend to my backend - this is appealing because then I can simply verify the signed token on the backend, and I have all the information about the user that I need. However, if my API is considered a resource server, I should probably use the access_token, but then I have to connect to Auth0's servers on every API request to both verify the token, and get basic user info, won't I?
I've read this which seems to suggest that the access_token is the only valid token for use with my API. But like I said, I'm not sure about the roles of the individual services. And using the id_token is tempting, because it requires no network connections on the backend, and contains information I need to extract the right data.
What is the right way to go about this?
I like this Medium post about the difference, all cred to this author.
https://medium.com/#nilasini/id-token-vs-access-token-17e7dd622084
If you are using Azure AD B2C like I am you can read more here:
https://learn.microsoft.com/en-us/azure/active-directory-b2c/openid-connect
ID Token
You will get id token if you are using scope as openid. Id token is specific to openid scope. With openid scope you can get both id token and access token.
The primary extension that OpenID Connect makes to OAuth 2.0 to enable End-Users to be Authenticated is the ID Token data structure. The ID Token is a security token that contains Claims(claims are name/value pairs that contain information about a user) about the Authentication of an End-User by an Authorization Server when using a Client, and potentially other requested Claims. The ID Token is represented as a JSON Web Token (JWT)
{
"iss": "https://server.example.com",
"sub": "24400320",
"aud": "s6BhdRkqt3",
"nonce": "n-0S6_WzA2Mj",
"exp": 1311281970,
"iat": 1311280970,
"auth_time": 1311280969,
"acr": "urn:mace:incommon:iap:silver"
}
The above is default JWT claims, in addition to that, if you requested claims from service provider then you will get those as well.
An id_token is a JWT, per the OIDC Specification. This means that:
identity information about the user is encoded right into the token
and
the token can be definitively verified to prove that it hasn't been
tampered with.
There's a set of rules in the specification for validating an id_token. Among the claims encoded in the id_token is an expiration (exp), which must be honored as part of the validation process. Additionally, the signature section of JWT is used in concert with a key to validate that the entire JWT has not been tampered with in any way.
Access Tokens
Access tokens are used as bearer tokens. A bearer token means that the bearer (who hold the access token) can access authorized resources without further identification. Because of this, it's important that bearer tokens are protected. If I can somehow get ahold of and "bear" your access token, I can pretend as you.
These tokens usually have a short lifespan (dictated by its expiration) for improved security. That is, when the access token expires, the user must authenticate again to get a new access token limiting the exposure of the fact that it's a bearer token.
Although not mandated by the OIDC spec, Okta uses JWTs for access tokens as (among other things) the expiration is built right into the token.
OIDC specifies a /userinfo endpoint that returns identity information and must be protected. Presenting the access token makes the endpoint accessible.
http://openid.net/specs/openid-connect-core-1_0.html
https://connect2id.com/learn/openid-connect#cool-id-token-uses
https://developer.okta.com/blog/2017/07/25/oidc-primer-part-1
Your frontent is your OAuth client application, once it stores the token it can take actions on the OAuth flow. And your API service is resource server, because it accepts the access_token issued by your identity server.
Also I would say that your id_token stands for the identification of the logged user and may contain sensitive data for your app. The access_token is standing as your credential to access a resource.
At the end you will use an access_token to request a resource, and then if you need specific data from the logged in user (resource owner), you may request the ID token from the token endpoint.
In my opinion, the first approach is correct. Your SPA is the client application and your APIs are resource servers.
I would suggest you limit the use of id_token till your SPA only. You can use the basic information present in the id token (like username and email) to display user information within your UI. If you can generate access tokens as JWTs too then your API can validate the access tokens without going to the Identity provider. You can include roles (or similar) in your access token to get authorization information in your access token.
I was also wondering if I need to talk to the IdP on every request if I'm using the tokens received from the IdP. I ended up with the following setup:
Only the backend talks to the IdP, the frontend does not.
Upon the IdP callback the backend issues a JWT for the frontend.
User session and frontend-backend communication is managed entirely by my app using the JWT token.
Check this article: OAuth2 in NestJS for Social Login (Google, Facebook, Twitter, etc)
and this repo: https://github.com/thisismydesign/nestjs-starter
and this question: OAuth2 flow in full-stack NestJS application
The id_token is an cryptographically encoded token for authentication. The OP (the auth provider) is the one that generates it and the RP (relying party or the resource) will eventually re-present the token to the OP to counter validate when handed over by the client. In short the id_token is tied to authn workflow.
The access_token enables resource access. It does subsume the userinfo i.e., the id_token or any other principal on whose behalf the access is being requested. So this token includes both user claims plus claims to groups that are authorized. In short the access_token is tied to your authz workflow.
Whats the best way to programmatically authenticate user using OAuth 2.0 Authentication Code Grant ?
Wondering if there is a way to combine step A and B as stated on the spec - https://www.rfc-editor.org/rfc/rfc6749#section-4.1, i.e pass user ID and password as part of authorize call ? Something like,
/authorize?response_type=code&client_id=s6BhdRkqt3&state=xyz
&redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb&user_id=john.doe#mail&password=xxxx
I believe one way is to submit() the form returned by the Authorization server with user id and password. Taking this route would create a dependency on the form and any changes to it given it is not a public API.
The Authorization Code grant is designed to be used with a full browser i.e. should not be used to authenticate the user programmatically. In fact using it programmatically would defeat the purpose of OAuth 2.0 to not divulge the user's credentials to the Client.
Grants like Client Credentials and Resource Owner Password Credentials have been designed to be used with non-browser Clients.
Alternatively you could create an access_token and refresh_token for your Client in a browser using the Authorization Code grant, then pass the tokens to your non-browser Client so that it can use the refresh_token on its own to obtain a new access token when the old one expires.