I have a windows 7 box. I am trying to run Docker quickstart. It keeps dying with the following error...
Starting "default"...
(default) Check network to re-create if needed...
(default) Waiting for an IP...
Machine "default" was started.
Waiting for SSH to be available...
Detecting the provisioner...
Started machines may have new IP addresses. You may need to re-run the `docker-m
achine env` command.
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): Regeneratin
g TLS certificates
Waiting for SSH to be available...
Detecting the provisioner...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
'nutc': unknown terminal type.
Looks like something went wrong in step ´Finalize´... Press any key to continue.
On doing a search on the internet I can see that some people have suggested commenting out clear in start.sh which I have also tried but doesn't seem to fix the problem.
Has anyone got any ideas on how I might get past this?
thanks
Solution for Windows 7 Docker ToolBox:
cd to installed folder Ex: "C:\Program Files\Docker Toolbox"
then, type "bash" and enter
run "./start.sh"
hope it works.
It breaks on the "clear" command in the start.sh script (corresponding to the "Docker quickstart Terminal" icon)
If you comment the clear command just after STEP="Finalize"
adding a # like that
#clear
At least like taht the it will run.
Personnally my terminal has then problems with backspace key and arrows keys.
Related
I had been trying to create a context to deploy a few containers from my main Mac to another another but I have been getting a weird error.
So, I have two Macs, one iMac (Late 2013) (here will be called Enterprise) and one Macbook Pro (Mid 2015) (here will be called Defiant). Defiant is my main computer and I want to deploy my container to Enterprise in order to not overload Defiant memory. I have been working with docker context to achieve that. Currently, I have Enterprise running Docker v20.10.16 and Defiant running v20.10.16.
I have created the context on Defiant and after I run the docker context use enterprise and when I run docker container ls I get the following error:
error during connect: Get "http://docker.example.com/v1.24/containers/json": command [ssh -l rafaelguerra -- Enterprise.local docker system dial-stdio] has exited with exit status 127, please make sure the URL is valid, and Docker 18.09 or later is installed on the remote host: stderr=zsh:1: command not found: docker
Does anyone know how to make it work?
Thanks
UPDATE:
Weird thing I just found out, when logged into Enterprise and run echo $PATH returns /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin however when I run ssh rafaelguerra#enterprise.local 'echo $PATH' I got the following /usr/bin:/bin:/usr/sbin:/sbin
I don't have a clue for a reason for this.
I found the reason for the problem, all commands docker run are run within ssh not with a permanent ssh session. So, zsh does not load the correct PATH when the command is run within the ssh. Therefore, the only thing I need to do was setting the correct PATH inside of the ~/.zshenv file and everything is working now.
I have installed Docker Desktop version 4.4.4 and it is not running. It only displays "Docker Desktop Starting ..." but never starts running.
I have tried so many ways but didn't solve:
Allowing the following files in windows firewall C:\program files\docker\docker\resources\vpnkit.exe, C:\program files\docker\docker\com.docker.service C:\program files\docker\docker\resources\com.docker.proxy.exe
Removing 'Docker' and 'Docker Desktop' folders from AppData/Roaming and AppData/Local
Uninstalling and reinstalling Docker with different versions including 4.5.1
The main problem is WSL2 does not auto install the kernel when WSL2 installs, yet Docker Desktop expects it already installed. So, fully close & stop Docker as other answers have said, then run this cmd as admin:
wsl --update
Now open Docker Desktop & it should start up ok.
I've found out another symptom leading to the solution is also related to WSL.
On one side, Docker service won't start throwing this error:
error during connect: This error may indicate that the docker daemon
is not running.: Get
"http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/version": open
//./pipe/docker_engine: The system cannot find the file specified.
And on the other, WSL is unresponsive. Attempting to run a WSL Distro or WSL command directly on CMD, won't return any output at all. It will just hang in there.
So the solution is common to WSL and Docker.
I've found in a question regarding the WSL issue, that the LxssManager Windows service is staled (it may show under services.msc as Stopping and all the buttons are greyed out, or I've even seen it Running apparently, but with the Docker and WSL issues above, so something is wrong with it still.)
First, we have to get LxssManager PID in order to kill it. Using an elevated shell, we can get it this way:
sc queryex LxssManager
Having the PID, we can kill the process but beware I wasn't able to kill it using kill or taskkill commands. I was getting the following error:
ERROR: The process with PID XXXXX could not be terminated.
Reason: Access is denied.
To effectively kill the process, do as following:
wmic process where ProcessID=XXXXX delete
Replace XXXXX with PID, of course.
Having done so, start the LxssManager service:
net start LxssManager
A word of warning:
I've noted in some cases this is not enough for unknown (to me) technical reasons even if LxssManager service is shown as Running.
Just repeat the above steps! Sometimes it works doing this once, sometimes doing it twice for some reason.
TL;DR
Kill LxssManager Windows service using wmic+PID.
Start LxssManager service.
Repeat twice or more if issues persist.
Docker and WSL issues are solved.
Here i am using Windows platform, I faced this issue.
And to resolve this issue follow the below steps.
Just delete the temporary files from the following.
C:\Windows\Temp
C:\Users{yourAccountName}\AppData\Local\Temp
C:\Windows\Prefetch
then
Uninstall Docker Desktop
Restart computer
before installing docker, make sure you have Ubuntu WSL(download from Microsoft store)
[optional] If you need Terminal Preview(multi-terminal) download from Microsoft Store. Great Terminal
Install Docker Desktop Again
Thanks
For me, it was a problem with WSL. When I tried:
wsl --install -d Ubuntu
in a command window, after a few minutes I got error 0x80370114
The fix was to do:
Exploit Protection > System Settings > Control Flow Guard
turn on
restart computer
Then reinstall/restart Docker Desktop, and it works!
Hope this helps someone else
I was facing same code for for Docker version 4.*. For me it was Visual Studio code,
Stopped WSL form Task manager
stopped Docker which was showing "Docker desktop is starting" form Task manage
stopped Visual Studio code form Task manager
Started Docker again
These steps placed my Docker in Running state in 30 seconds
Hope this helps someone!
Solved this issue with #Alvi answer
Docker forever in "Docker is starting.." at Windows task
I guess you are using wsl2 features. In that case, open PowerShell or command prompt and type: optionalfeatures.exe
scroll down and uncheck
Windows Subsystem for Linux
apply the changes and restart your computer.
After restart follow the previous steps again and check
Windows Subsystem for Linux
and restart again. Hopefully now your docker will run
My fresh install was experiencing the same symptoms. Also wsl --list showed "no installed distributions". I tried many reinstallations and restarts of Docker and WSL, but eventually found the steps:
In Task Manager, kill all processes related to Docker & Docker Desktop
Run Docker Desktop as administrator
Got it working on on Windows 11 Enterprise.
for me it worked in windows (docker desktop):
to uninstall the docker
reinstall as administrator
don't select the part with wsl
As wrote here, you need to do:
wsl --update
But after that it doesn't fix my issue until I did restart to my pc.
What worked for me was to log in into the Docker (upper right corner), but when I first clicked on login, it said "exec: "rundll32": executable file not found in %PATH%" - I search and found that I need to check environmental variable in PATH that I have "C:\WINDOWS\system32" there - (and in my case I really had it broken somehow - don't know why, but I missed backslash between Windows and system32). So I fixed to correct path, restarted PC. Then I was able to login. And immediately "Docker Desktop Starting..." was gone.
I use Docker with PyCharm. I ran into this problem when I launched PyCharm and Docker Desktop at about the same time.
On my machine Docker Desktop starts automatically when I boot. I can avoid the problem by waiting for Docker Desktop to finish starting. And then start PyCharm.
I was also having the same problem, just a few minutes ago.
Platform:
Windows 10 Pro - 22H2 - Build 19045.2486
Windows Updates newly installed: KB5022282, KB5020876, KB5012170
What i did was: Activating the Windows Hypervisor Platform
And it did solve the problem, atleast for now
In my case it helped me to enable the CPU SVM (Support Vector Machine) function in my BIOS settings.
Also, if you have this feature disabled, you will not be able to use Virtual Box either.
SVM in BIOS
got to services and stop Docker desktop service and start again
reopen Docker desktop it will work
wsl -v
if it show version then linx is install
search windows programer feature in your laptop
enable virtulization
wsl --set-default-version 2
restart laptop and then start docker and wait for 2 minutes your docker will start working
I am running windows 11, visual studio 2023 and had this issue.
First, open a command prompt and type
wsl.exe --list --online
Then enter following
wsl.exe --install Ubuntu-20.04
Then type in the prompt sudo apt update to update the distribution. Lastly, start up Docker desktop and log in (you can register at their site). That fixed Docker on my pc.
I am trying to run docker Desktop in my windows 10 Local. have installed it successfully but while running it I am getting the below error.
System.InvalidOperationException:
Failed to deploy distro docker-desktop to <localpath>: exit code: -1
stdout: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
I think it is saying some windows services need to be enabled, but I don't know which service has to be enabled could someone please help me with this concern?
docker version
C:\Users\lenova>docker --version
Docker version 20.10.2, build 2291f61
Uninstall Docker.
Uncheck Containers, Hyper-V, Windows Subsystem for Linux in Windows features
Restart the system
Install Docker Desktop
Restart System
Start Docker Desktop
Right click on docker icon, run as administrator (if you have administrator rights on your computer). It solved the problem for me.
Try delete %USERPROFILE%/.wslconfig. If it helps then you can try to modify it so that it work. As for me I deleted the file, because on my workstation docker didn't want to work with it
Almost sure, that the accepted answer will work. However, it won't be an option, if you utilize WSL for other purposes as well. In that case, you may have several configurations/apps in WSL and just reinstalling or deleting your configuration will probably be a bad solution.
Furthermore: WSL is not the issue for this error! It is created by Docker engine configuration which will kill the WSL service (LxxsManager). This may happen because of
changed configuration (by you) or
because of a Docker update, maybe also
because of Windows updates
You can find a detailed discussion about this issue on Docker's GitHub Issues.
I personally experienced this problem after installing updates on Windows while running Docker v3.5.2. And again, reinstalling/killing WSL is not an option for me! So I tried to kill all services (Docker and WSL) and update Docker. Unfortunately that did not work in first place, since LxxsManager was in some weird state and I could not even kill it any more (even a kill command as admin with force switch did not do it's job!)... So here is my solution to fix that problem:
Remove Docker from autostart
Restart Windows (Yippiee: WSL works again! 🥰)
Install a new version of Docker (in my case v.4.2.0)
Restart Windows again (probably not necessary, but for me it was because Docker engine did not start before a Windows restart)
Start Docker (Yippiee: Docker works again! ☺️)
Note: Since I did not change Docker configuration, I installed an update. If you changed configuration options resulting in that crash, your solution may be different. Literally, instead of updating Docker (step 3) you would probably roll back your Docker configuration changes instead.
The quality of Docker for Windows is very bad. I catch these dangerous very often.
Check list:
(1) Use this tool https://www.nirsoft.net/utils/regscanner.html . Search docker, delete all.
(2) Remove WSL sub system, Hyper-V, then restart
(3). Create file foo.reg has content
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\Parameters\AppId_Catalog\0408F7A3]
"AppFullPath"="C:\\Windows\\System32\\wsl.exe"
"PermittedLspCategories"=dword:80000000
run.
(4) Uninstall Docker
(5) Run cmd type ... . Delete folder .docker
Delete Docker folder in Program Files
(6) delete
(7) Install latest version of Docker.
(8) Re-install feature WSL for Windows.
Install Ubuntu from Windows store
(9) Re-install Docker (as Administrator)
(10) Run Docker as Administrator .
In my case, I was getting a similar error. This was happening because Docker desktop didn't have permissions to access the path C:\Users\Adithya\AppData\Local\Docker\wsl\distro. This started happening after I switched to WSL2 backend.
The solution was to kill all docker process. Next, Run Docker Desktop as Administrator.
System.InvalidOperationException:
Failed to deploy distro docker-desktop to C:\Users\Adithya\AppData\Local\Docker\wsl\distro:
exit code: -1 stdout: The operation timed out because a response was not received from the virtual machine or container.
run as administrator , and you switch the container to windows by clicking the icon bar in the right corner taskbar and choose switch to windows container
https://learn.microsoft.com/en-us/virtualization/windowscontainers/quick-start/quick-start-windows-10-linux
If you don't need to run Linux and Windows containers side-by-side, an option is to turn off the WSL and use Hyper-v instead. This should work fine.
I had to exit Private Internet Access (PIA) VPN to get docker to work on my system. Not sure why.
I had the PgAdmin 4 app running, and when I closed it and tried starting Docker Desktop again it booted normally.
Not sure if there is a link, but an easy solution to try.
This worked for me: https://github.com/MicrosoftDocs/WSL/issues/547#issuecomment-873540236
Copy below snippet:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\Parameters\AppId_Catalog\0408F7A3]
"AppFullPath"="C:\\Windows\\System32\\wsl.exe"
"PermittedLspCategories"=dword:80000000
Save it as a file wsl.reg
Execute the file to update the registry
Launch Ubuntu again
Issue resolved
In my case, the issue was caused by Acrylic DNS server. Anything that holds port 53, would be a problem.
Interesting that it all worked fine for a few days after installation, maybe because I did not reboot the laptop all that time, only used the deep hibernation. So it was hard to guess what could break the docker setup, I was sure that it was because of the recently installed windows or docker updates.
Restarting wsl worked for me.
Run the following
wsl --shutdown, wait for it to shutdown
wsl, wait for it to start
Start Docker Desktop after this.
On Windows 10:
Open Services
Right click on LXSSMANAGER -> Restart
Close wsl using cmd with following command:
wsl --shutdown
Execute following start wsl again:
wsl
I solved by the following steps:
Uninstall Docker and WSL 2 kernel.
Uncheck Containers, Hyper-V, Windows Subsystem for Linux in Windows
features
Restart the system
Install Docker Desktop
Restart System
Start Docker Desktop
The problem is in WSL as it becomes unresponsive and returns a service error if you try the following command in PowerShell:
wsl -l -v
I believe the process can be simplified a bit more with:
Uncheck Windows Subsystem for Linux in Windows Features
Reboot
Turn the feature back on
Re-apply the WSL2 update
Reboot
No need to uninstall/reinstall Docker Desktop.
This got me back up and running with Windows 10 Home (which requires WSL2) and Docker Desktop 2.4.0
This question already has an answer here:
Enable Systemd in WSL 2
(1 answer)
Closed 2 months ago.
I'm a very first user of Ubuntu. I failed to install Ubuntu in wmware ,so I installed Ubuntu application in Microsoft app store and everything was quite all right.
But when I insert shutdown or halt command to power off my ubuntu I kept getting 'system has not been booted with system as init system (PID 1). Can't operate' error message.
I tried to using docker following with this link (https://blog.jayway.com/2017/04/19/running-docker-on-bash-on-windows/) but I failed after going to Number 2 process many times. I'm not sure my failure is because of installing docker toll box instead of normal one. (my computer is just windows 10. not a windows pro)
I think I have to try other thing. If you don't mind me asking, how can I slove this problem?
(and one more. If I just click 'X' button at the top of right side, is it different with shutting down Ubuntu using 'halt' or 'shutdown' command?
Thank you
I found this useful: https://linuxhandbook.com/system-has-not-been-booted-with-systemd/
In my case
# start docker using systemctl
sudo systemctl docker start
# returns:
#
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
The basic advice is:
# check if your system is using `systemd` or `sysvinit`
ps -p 1 -o comm=
If the command doesn't return systemd, and in my case, Ubuntu-20.04 on WSL, the command returned init, then use the command pattern
# start services using sysvinit
service docker start
This works for me.
Based on this: https://devblogs.microsoft.com/commandline/systemd-support-is-now-available-in-wsl/
systemd is now available in WSL Version 0.67.6 or higher.
To enable:
Open a command prompt:
# CHOOSE option A or B:
# A. check your version and ensure it is 0.67.6 or higher
wsl.exe --version
# B. run WSL update if the version is low
wsl.exe --update
Open a WSL prompt:
sudo nano /etc/wsl.conf
Add this to wsl.conf and save the file:
[boot]
systemd=true
Go back to the command prompt:
# warning: this will kill any shells/processes you have running!
wsl.exe --shutdown
First of all, Ubuntu installed via MS Store is using WSL (Windows Subsystem for Linux) Technology. It simply means there is no virtualization, Windows and Linux kernels are living side by side (the Linux kernel is not fully implemented yet).
So if you are trying to "shut down your Ubuntu", you would turn off the whole computer just like the Windows does. But in this case, WSL doesn't apparently have rights to do that.
In other words, you can look at your Ubuntu bash window just like any other terminal, like e.g. CMD or PowerShell.
When you start a program in the WSL (Ubuntu), you can see it also in Windows Task Manager - that's just a proof, that there is no virtualization.
Regarding docker:
If I'm not mistaken Windows 10 Home doesn't provide Hyper-V virtualization. It means you'll have to use a different one e.g. by using VirtualBox. In order to make it work, I can recommend you to follow this tutorial and especially for VirtualBox please check this answer here
Hope it helps :)
I am a newbie about docker.
This morning I have just download and install docker 1.9.1 to my computer (OS: windows)
After install it, I run 'Docker Quickstart Terminal' but it fail
The console keep print like this:
Machine default already exists in VirtualBox.
Starting machine default...
(default) Starting VM...
Machine "default" was started.
Started machines may have new IP addresses. You may need to re-run the `docker-m
achine env` command.
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): Regeneratin
g TLS certificates
Detecting the provisioner...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Setting environment variables for machine default...
Looks like something went wrong... Press any key to continue...
I have tried to remove the Virtual Machine and create it again, but the problem still happen
Creating Machine default...
Running pre-create checks...
Creating machine...
(default) Copying C:\Users\mcthanh\.docker\machine\cache\boot2docker.iso to C:\U
sers\mcthanh\.docker\machine\machines\default\boot2docker.iso...
(default) Creating VirtualBox VM...
(default) Creating SSH key...
(default) Starting VM...
Waiting for machine to be running, this may take a few minutes...
Machine is running, waiting for SSH to be available...
Detecting operating system of created instance...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect Docker to this machine, run: C:\Program Files\Docker Toolb
ox\docker-machine.exe env default
Setting environment variables for machine default...
Looks like something went wrong... Press any key to continue...
Do you have any exp about this?
Thank you very much for your help!!!
After a sleep / wake cycle, Windows detects the Host-Only network as a "duplicate" and changes its IP. After that, docker-machine (or the Quickstart terminal) doesn't work anymore.
It is probably caused by this VirtualBox bug (from 5 years ago): so there doesn't seem to be a fix soon from VirtualBox. And it's probably a Windows bug.
This should be a valid workaround:
Open VirtualBox
Go to File -> Preferences -> Network -> Host-only Networks
Docker Toolbox probably created a second Host-only network, probably named "VirtualBox Host-Only Ethernet Adapter # 2", double click that
Change the "IPv4 Address" from something like 192.168.99.1 to something like 192.168.99.2 (you will probably have to increase / decrease the IP every time). But it's important that the IP actually changes.
Hit OK. If the IP changed (it should have changed), you will be prompted for you "Windows Administrator OK" (or however it's named).
After that, the docker-machine and the Quickstart Terminal should work.
Sometimes we have virtualization disabled in our system make sure that
virtualization is enabled or not ?
follow given steps to check if u have virtualization enabled or not
Open Task manager
Click on performance
Click on CPU
Check whether virtualization is enabled or not
If it is disabled then go to bios setting and enable it.