I need to change this parameter. Default is 1048576 bytes. I want at least 2097152 bytes.
I already know this is not recommended for a production environment as I have already read in this forum.
I'm using Couchbase 4.5 with Docker.
I already changed the file "opt/couchbase/etc/couchdb/default.ini" and restarted the container and later the service inside the container. But it doesn't take effect.
I also tried this:
curl -X POST http://Administrator:password#localhost:8091/diag/eval -d 'rpc:eval_everywhere(erlang, apply, [fun() -> couch_config:set("mapreduce", "max_kv_size_per_doc", "2097152") end, []]).'
But with no success.
During my tests, I changed the file "opt/couchbase/etc/couchdb/default.ini" to set a new value for the parameter "function_timeout" and it worked. I tested with a sleep inside map function and the log showed timeout error.
It means that when I restart Couchbase it takes the new configuration.
But change the parameter "max_kv_size_per_doc" makes no difference. Does anyone know why?
Any help would be appreciated.
Regards,
Angelo
Related
Context
So I finally give a try to Fish, and as one would expect I encounter some frictions due to differences with my usual routines.
The most astonishing for me, as for many other, was the absence of the bang operator. I'm fine with the lose of sudo !!, as the suggested function replacement seems even better to me, I named it gar which means "To make, compel (someone to do something); to cause (something to be done." However I'll need a replacement for !<abc><enter> which grab the last history line starting with <abc> and run it without further ado, suggestions are welcome.
Now, for the more personal things:
- I use a Typematrix 2030 keyboard
- I use a bépo layout
- I like to configure default finger position keys with the most used actions
Aims
As on my keybord <enter> is well positioned and is semantically relevant for that, ideally I would like to achieve the following key binding:
ctrl-enter: accept the whole suggestion and run it without further confirmation
ctrl-tab: accept the whole suggestion and wait for further edit
alt-enter: redo the last command without further confirmation
But according to xev it appears that, at least with Gnome-terminal, this combinations are not recognized. Are they terminal that supports it? For now I remapped these three to <ctrl>-i, <alt>-i and <alt>-I respectively:
bind --preset \ci forward-char execute
bind --preset \ei forward-char
bind --preset \eI forward-word
This works as expected, but it seems that now the tab key will also map to the first item. I guess that tab map to <alt>-i at some point in the shell stack. I wasn't aware of that, so I don't know yet if it will be possible for Fish to separate each of them.
To manage jobs, I also came with
bind --preset \es fg
bind --preset \eS bg
The first works as expected, but the second one doesn't. With application like vim, the binding should be operated in the application configuration itself of course. But for things as trivial as yes, <alt>-S won't work as expected while <crl>-z continue to operate normally.
I also would like to bind some commands like ls -alh and git status --short to a directly executed command, showing the result bellow the currently edited line, allowing to further type seamlessly, but didn't find the way to do it yet.
Summary of remaining question
So here are my more precise questions summarised:
how do I bind the sleep signal to <alt>-S?
is there a terminal I can use where <alt>-<enter> and <ctrl>-<enter> works?
how to seamlessly run command while maintaining the current line edition in place?
can you bind something to <alt>-i without altering <tab>?
how do I bind the sleep signal to -S?
What you are doing with bind \es fg is to alter a binding inside the shell.
But when you execute yes, the shell isn't currently in the foreground, so shell bindings don't apply.
What you'd have to do instead is change the terminal settings via stty susp \cs,
but fish resets the terminal settings when executing commands (so you can't accidentally break them and end up in an unusable environment), so there currently is no way to do this in fish.
can you bind something to <alt>-i without altering <tab>?
Sure. You bind \ei. Which is escape+i, which is alt-i (because in a terminal alt is escape).
Your problem is with ctrl-i, which in the way terminals encode control+character is tab. The application receives an actual tab character, and at that point the information has been lost.
is there a terminal I can use where - and - works?
Most terminals should send \e\r for alt-enter. ctrl-enter again is unencodable with the usual code (because \r is ctrl-m), just like ctrl-tab is.
Any fix to this requires the terminal to encode these combination differently.
how to seamlessly run command while maintaining the current line edition in place?
I don't know what you mean by this. I'm guessing you want fish to remain open and editable while a command also runs in the foreground. That can't work. There's no way to synchronize output from two commands to a terminal, not with cursor movement being what it is.
I use ubuntu 20.04 with mate (then marco). Up to now (pre-20.04) I could bind Mod4+S to my liking (Win+S). After 20.04 upgrade I discover that this Key shortcut Mod4+S is kinda 'hard-coded' to run mate-search-tool, and my explicit binding from [ControlCenter][Keyboard shortcuts] is not honored (ignored).
The problem exhibit itself as marco spitting the following message
"Failed to execute child process mate-search-tool (No such file or directory)"
Or if I install mate-utils (that I don't need) it run mate-search-tool.
I double checked the decong editor (gsettings) for any hidden 'run-command' mapped on key Mod4+S key but could not find any.
So at the moment I call it an hard-coded key binding.
I'd like to bind Mod4+S, any pointers appreciated.
Cheers
The key seems to be /org/mate/marco/keybinding-commands/command-6.
I didn't find a way to completely disable it but at least if I set the command I want in place of mate-search-tool it works.
It looks, there are multiple keybindings in mate which are not exposed in control center / keyboard shortcuts config. For me, most of them are unwanted. To change or remove them install dconf-editor and go to /org/mate/marco/global-keybindings/ path, where you can find multiple run-command-X keys. To disable them just set disabled string instead of existing keybinding.
I run neo4j Version: 3.3.2 in a docker container and tried to configure a default style as described above.
Grass file is accessible via HTTP (http://somedomain.com/resources/style.grass)
CORS rules are set
Command added to config: browser.post_connect_cmd=style http://somedomain.com/resources/style.grass
When i start my container with this config and run match (n) return n i see nothing.
Then i run :style http://somedomain.com/resources/style.grass and it works... Why?
That leads me to conclude that the grass file ifself (content) and the accessible of this file are not the problem.
It seems that there is an error with the default style configuration.
Do you have any tips to debug this? The logs are clean.
I found the problem. We added this property at the end of the neo4j.conf. After startup neo4j reorder the properties, put it at the 2nd place and accidentally add the 3rd property at the end of the 2nd, so that it’s not valid. We put it manually at the 2nd place and now it works.
When I call oninit -i command in an Ubuntu server terminal, it shows an error like this:
INFORMIXSERVER does not match DBSERVERNAME or any of the DBSERVERALIASES.FAILED
Can anyone give me a solution for this problem?
What is the setting of $INFORMIXSERVER in your environment, and what values are set for DBSERVERNAME and DBSERVERALIASES in the $ONCONFIG file? It seems that you've set $INFORMIXSERVER to a value that isn't present in the $ONCONFIG file that is in use. Maybe you didn't set $ONCONFIG at all, or maybe you set $INFORMIXSERVER incorrectly, or maybe the names in the $ONCONFIG file are incorrect.
If you don't set $ONCONFIG, it defaults to onconfig (and maybe even falls back to onconfig.std). But you should normally set $ONCONFIG to a known value. I usually use onconfig.<servername> where the <servername> is the value of DBSERVERNAME in the file. However, nothing enforces that convention.
http://www.ibm.com/developerworks/data/library/techarticle/dm-0606bombardier/ is a good tutorial for setting up informix DB, I came up with same issue since my rootdbs file was owned by 'root', not by 'informix', make sure all file that are mentioned in the above tutorial to be owned by user 'informix' are correctly owned.
I'm building some simple load testing for my API, and to make sure everything is on the up and up I'd like to also review the response headers and data. But when I run my test using the command line and then re-open the GUI to add a View Results Tree listener and load the created file the response headers or response data is empty.
I entered the following values into user.properties (also tried uncommenting those values in jmeter.properties and changing them there, same result)
jmeter.save.saveservice.output_format=csv (tried xml, omitting it, jtl)
jmeter.save.saveservice.data_type=false
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
jmeter.save.saveservice.response_data.on_error=true
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=false
jmeter.save.saveservice.assertions=false
jmeter.save.saveservice.latency=true
jmeter.save.saveservice.bytes=true
jmeter.save.saveservice.hostname=true
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=true
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.assertion_results_failure_message=true
jmeter.save.saveservice.timestamp_format=HH:mm:ss
jmeter.save.saveservice.default_delimiter=;
jmeter.save.saveservice.print_field_names=true
But still no luck when opening the result file. I tried declaring the file after the -l tag as results.csv, .jtl, even .xml but none of them show me the headers and data.
I'm running it locally on Mac OS X 10.10 using the following command, jmeter version is 2.12
java -jar ApacheJMeter.jar -n -t /Users/[username]/Documents/API_test.jmx -l results_15.jtl
I don't know if it's not even saving that data, or if the Listeners can't read it or if I've been cursed but any help is appreciated.
It works fine if I add a Listener and run it using the GUI, but if I try to run my larger tests that way, well, things don't end well for anyone.
So my question is:
How do I save the response header and data to a file when using the command line, and how do I then view said file in jmeter?
Add a Simple Data Writer (under Listeners) and output to a file (NB: different file than your log). Under the 'configure' button, there are all sorts of options of what to save. One of the check boxes is Save Response Header.
This file can get huge if you're saving a bunch of things for every request- one strategy is to check everything, but only save for errors. But you can do whatever works for you.
You can also turn on "Functional Test Mode" which will produce a large file but will contain pretty much anything you might need to debug your test.
Beware, this can create a very large JTL file, so don't forget to turn it off for your large test runs! See JMeter Maven mojo throws IllegalArgumentException with large JTL file
Alternatively use a Tree View Listener in the GUI for a small sample of the requests and check the request/response in the GUI (including headers) to debug or check your test.
Add Below lines in user.properties file
jmeter.save.saveservice.output_format=xml
jmeter.save.saveservice.response_data=true
jmeter.save.saveservice.samplerData=true
jmeter.save.saveservice.requestHeaders=true
jmeter.save.saveservice.url=true
Restart cmd prompt.