Not sure what the problem is here, I've tried:
Cleaning, rebooting Xcode/Computer
Clearing Derived Data
Relinking outlets
I don't have this problem with any other outlets in any other views. Here are some photos:
https://imgur.com/a/2t3da
https://imgur.com/a/zikBq
EDIT: It was a really silly mistake -> misspelled the identifier in my tableView method. Thanks for all your help though!
Did you set your custom cell class in Identity Inspector?
Identity Inspector
Did you try delete outlet and drag outlet again?
Are you referencing to correct custom class? Double check this. I am often using another class unwillingly and than I realized that I am in wrong file.
I think its a normal behaviour, try loading your VC in the storyboard and add the assistant editor on the right. Mine does the exact same thing when i go to my code straight without loading the VC in the storyboard. Can you also show how you set the textLabel?
I have an IOS app that displays items. I have a working "MYItemCell.xib" and a "MYItemCell.swift". I have just added a new type of item that will be displayed somewhat differently. It is named: MYItemTwoCell.xib/swift
Right now I am trying to keep most of it the same, so I just copied over both the .xib and the swift file and renamed things. But I cannot connect my new .xib to my new .swift. It remains connected to the old .swift
I was having this problem: Xib file: Can't drag a View from a xib file to a swift file . So I tried to make the "container" in the .xib file of the class in my .swift file.
But, when I write in my new class name "MYItemTwoCell" it always reverts back the "MYItemCell"
When I click the down arrow on the selector it only suggests "UITableViewCell" and "MYItemTwoCell" is not listed.
EDIT 1
I believe the issue that the MYItemCellTwo cannot be a UICollectionViewCell. It will connect to a blank UIViewController that I add. In other words: I cannot make a UICollectionViewCell a MYItemTwoCell class but I can make a UIViewController a MYItemTwoCell class.
Does anyone know how to make my MYItemTwoCell a UICollectionViewCell class not a UIViewController class?
You need to use the Identifier inspector from the MYItemTwoCell.xib file and reference your MYItemTwoCell.swift file.
Don't worry if you not see it, write class name.
I have created a custom view (Quantity View) with nib file in Swift. I have created some IBOutlets & IBActions (for buttons, labels etc.) in my custom view.
I tried to use this custom view (Quantity View) by assigning class name to a UIView in my storyboard.
It's showing me all the IBOutlets & IBActions in the Connections Inspector, as shown in this screenshot: .
I just want to show only delegate for the Custom view.
Possible Answer:
I thought I can use the -viewWithTag to get the views instead of Outlets.
But, I want to know if it's possible with having Outlets also or if there is much better way to do this?
What are the other possible ways (optimum) to handle this situation?
You can also consider the following solution:
You can take the subviews of your QuantityViews(custom view) and you can identify the specific views by its frame origin.
Note : you should know the customview subviews frame
Its not possible to hide IBOutlets from storyboard if you declare the class members as IBs (IBOutlets or IBActions).
The IBOutlets or the IBActions are just indicators to the interface builder so that it can show the names on it when you try to bind them it actually calls the setValue: forKey: method to set the view's reference to the IBOutlet property.
Now if you try to access an subview from the file's owner class without any IBoutlets you need to have a pointer to point it, so for that either you can get the reference using ObjectID which is assigned to the subview by the interface builder or you can get it using the viewWithTag: method.
The ObjectID you need to find all time when you add or replace a subview from the view, so better and convenient approach is to use tag property of UIView class.
So my conclusion to this problem is to access the views using the viewWithTag method you mentioned earlier.
I think your way is correct. But sometimes Xcode doesn't work correctly.
The following makes the IBOutlets and IBActions reappear and work properly:
Clean project your project in Xcode.
Quit Xcode completely.
Delete all contents of ~/Library/Developer/Xcode/DerivedData/.
Restart MacOS just in case.
I hope you will resolve that :)
It's been awhile since I've used Xcode and I resumed an old project I was working on awhile ago. I created a new UITableViewCell subclass. In my storyboard, I dragged a UITableViewCell onto my UITableView of my UIViewController. I changed the type of the UITableViewCell to my subclass, but when I control + drag from the UITableViewCell subclass to the UITextField, it doesn't allow me to make the connection.
.h of my UITableViewCell custom subclass
#property (nonatomic, weak) IBOutlet UITextField *titleTextField;
I must be going crazy because I thought this was something that just worked. I saw in another UIViewController that there is a custom subclass for the UITableView when I worked on this project last. I changed the subclass that was having the problem to that type of UITableViewCell subclass and I'm still not able to ctrl+drag to make the IBOutlet connection. Am I missing something here? Wasn't this something that always worked this way? Is there something new I'm not aware of? I tried using the assistant editor as well to drag it to the code, but that doesn't work either. I went back to the UITableViewCell subclass that DOES have a connection already made from when I last worked on this, and I tried ctrl+dragging to the label again, and it doesn't bring up the menu on which outlet I want to connect to either.
Another thing that is weird, is when I'm trying to type the custom class of my UITableViewCell that is already created, even though I built my project, it doesn't autocomplete it in the Class field. I'm not sure if my Xcode is having problems. Also, I don't know if this matters, but in my UITableViewCell, I Have some standard UITableViewCells as well. Any thoughts? Thanks.
It looks like all I had to do for my class name to appear in the drop down was to quit Xcode and come back in. I thought things like that would have been fixed in the IDE.
I found that I could still add the connections in the connections inspector. I don't know why they removed the very easy ctrl+drag from the left hand side of the storyboard unless I'm missing something.
I have a UIViewController I created in my apps storyboard, as well as a custom UIViewController subclass which I added to the project (and is correctly in the compile phase for my target). However when I go to set the 'Custom Class' property on the view-controller in Storyboard my custom class does not show up on the list.
Checked that the class is part of my app's target, not tests'
Double checked that it is correctly a subclass of UIViewController
Compiled program just to make sure xcode was working with latest information
Restarted xcode
What would cause my class to not show up in the 'Custom Class' drop down?
Two ways I found that solve the problem but they are work arounds:-
Just type the view controllers name in the text field, or
close the project and then reopen it and in the project initialization it places the file on the list.
If you still have your problem or for those who could have the same problem:
Make sure to select on your storyboard your "ViewController" instead of your "View" (which is automatically selected when you click on the view in the storyboard). The difference between those two is that when the view controller is selected, a blue rectangle pop up around your app. To be sure to select the view controller, open the document outline and select it directly in your storyboard hierarchy.
I would try the following:
Check that the file implementing the class is part of the build phases (check under target > build phases)
Add the .m file to build phases (if it isn't already).
Restart Xcode.
You can fix this by editing the XML of your Storyboard.
Right-click your My.storyboard entry in the Project Navigator panel and select the Open As->SourceCode menu choice. Find your view controller entry in the XML, and add the attribute customClass="MyController".
Save the storyboard.
Right-click your My.storyboard entry in the Project Navigator panel again, and select the Open As->Interface Builder - Storyboard menu choice.
The custom class entry will now contain your MyController class name.
Make sure your class inherits from UIViewController.
#interface ClassName : UIViewController
In Xcode 8, a few of my classes had the wrong path (case sensitive) specified for their file locations.
MyProject/mysubdirectory/MyViewController.xib (.m, .h)
vs:
MyProject/MySubdirectory/MyViewController.xib (.m, .h)
Really not sure how it ended up in that state, but my project exhibited the exact same behavior as above (no outlets/actions displaying in IB), and fixing that path fixed the problem.
I fixed this two different ways. One way was by I opened the .pbxproj file and fixing the case sensitive issue manually. The other way that worked was by tapping the folder icon under the Identity and Type section of the File Inspector tab of the file, and re-selecting the file there.
Click on a different view controller in the storyboard, then click on it's custom class pulldown to confirm the new class is listed, but don't select it. Click back on the new view controller you made and you should see it now listed in its custom class pulldown menu. odd, eh? just forces a refresh I think.
I had been having the same issues as described in this problem. However, none of the suggested answers fixed it for me. My project compiled OK without warnings or errors, but, in the .h file there were no 'outlet' indicators to indicate that my outlets had been linked to storyboard elements.
Additionally, attempts to create new outlets in my code, by right-click and dragging into my header file, were not recognising my header source as a potential target for this operation. And furthermore, my Class did not make an appearance in the Custom-Class dropdown for the ViewController's property inspector panel.
And yet, the project compiled OK.
Closer examination showed that I had defined my own class in the following manner...
#interface KJBMainDataViewTrackConMk2<UIScrollViewDelegate> : UIViewController
which apparently compiles nicely.
But, if this is changed to the following, (moving the protocols to the end)...
#interface KJBMainDataViewTrackConMk2 : UIViewController<UIScrollViewDelegate>
Then everything springs to life. All outlets are suddenly indicated as being 'connected' with a storyboard element. And right-click dragging starts to work again, and my custom class appears in the custom-class drop-down in the property inspector panel for the storyboard ViewController!
Other answers here probably represent the most likely causes of this condition, but, I felt it worth mentioning at least this one other potential cause.
I had the same problem, but none of the other solutions worked for me. The issue for me was that I had a Mac and iOS target, both with their own versions of the same view controller. For example, I had a .h/.m pair of files named FooViewController for Mac and another .h/.m pair of files named FooViewController for iOS. Each pair was properly included with their respective targets, but for some reason Xcode does not like it and my view controller would not show up in the Custom Class dropdown in the view controller in the storyboard. I ended up renaming my class in the iOS view controller and it immediately showed up in the dropdown.
In my case, I drag a new TableViewController object to the storyboard, but I add a new file which's subclass is "UIViewController".... Then, I add a file which's subclass is "UITableViewController", problem solved!!
For those of you who are still having this problem after trying all the way around is probably because you clicked the View instead of ViewController.
You have to choose the file when ViewController is clicked.
This solved my problem.
I happened to come across this problem, and had no luck after trying the previous suggestions. Finally I found the reason is the header file's type is set to C++ header. After changing it to C header (like all the other header files), the class appears in the drop list. Don't know why though... Possibly helpful for others so I post it here.
Storyboard is looking for the custom class but physically its no there and its not displaying the custom class name in the list and also not displaying the outlets . Following solution perfectly worked for me.
Just copy your code some where else.(Lets say on desktop)
Open your existing code.
Delete the custom class file.(Move to trash)
Now add files from copied project folder (From desktop)
Don't forget to check "Copy if needed" check box
Open the story board and bingo you will get your custom class files in dropdown
be sure initially not adding the CustomViewController to any group or folder. place it in the root of your app.
none of the above(or below :) helped me. though I found that
after adding new viewcontroller to storyboard (just by dragging it in)
and adding my class by File\New\File\Objective-C Class, give it a name, no XIB, Next, Create
if I select my viewcontroller in storyboard and try to assign my class to it - my class is not there
BUT
if I click on a view that is in the viewcontroller itself then click on a class dropdown menu in Custom Class
AND THEN
select viewcontroller (click on a bar below the viewcontroller) and now again click on a class dropdown in Custom Class my newly added class magically shows up.
weird, must be a bug with refreshing. Xcode Version 5.1 (5B130a)
Make sure you select View Controller to which you want to attach your class. The easy way is open Document Outline and choose your view controller (When you tap on it form the Storyboard sometimes it simply doesn't choose the object you meant).
for my case, somehow bundle resources got deleted, so I added back and worked!
Build Phases -> Add Build Phase -> Copy Bundle Resources
find your file
Then drag and drop your file there
Then make sure your target membership is checked.
In my case, I selected the wrong UI.. so I deleted the class file and created a new one and selected the correct parent class
I had to restart XCode 7.3 (7D175)
What worked for me was, click on the file in the Project Navigator, then, in the File Inspector under "Identity and Type" beneath the "Location" dropdown box, click on the little folder icon and then select the file in the popup window.
Try to clean your project, and also restart your Mac. One peculiar thing that I did was change all the Custom Classes names and build the project again. It worked!
For macOS projects, creating a new class generated a class inheriting from NSObject instead on NSViewController.
Change from
import Cocoa
class AppsViewController: NSObject {
}
to
import Cocoa
class AppsViewController: NSViewController {
}
I was fairly frustrated with this issue as none of the answers above had solved my problem.
In my case: I was in the middle of working on swift view controller file and was making active changes (such as creating a custom collection cell class). I had not finished the code block and left it open like so :
class tableViewCell: UITableViewCell {
}
class collectionCell:
class viewController: UIViewController {
override func viewDidLoad(){
super.viewDidload()
}
}
Note the incomplete code block 'collectionCell2'
This was enough for xcode to not recognize my viewController file as such.
Once I completed this block the file reappeared in my xcode as an option.
Very silly and simple.
Make sure the view controller is matching with the same Type in the storyboard .
In my case swift file name was different then swift class name i.e
file name was ViewControllerTest.swift
and class name was ViewController.swift
after changing both to common name solved my problem
Restart Xcode after above changes
Make sure the class name of the ViewController is the name that you want. i.e.
class MyCustomNameViewController: UIViewController {
.
.
}
Changing just the filename is not enough.