I have two super view controllers MasterCategoryListViewController and MasterCategoryItemViewController.
I want to use these in several apps.
I inherit from both of these
class CustomListController: MasterCategoryListViewController
class CustomItemController: MasterCategoryItemViewController
Now in the MasterCategoryListViewController
I have a button handler...
#objc open func btnAddTapped(sender: UIBarButtonItem) {
let itemViewController = MasterCategoryItemViewController()
itemViewController.title = "Type"
self.navigationController?.pushViewController(itemViewController, animated: true)
}
I know I can override the method to push to CustomItemController however, I'm just wondering if I can do this in my MasterCategoryListViewController, obviously without it knowing anything about what CustomItemController?
Create a method on the parent called something like detailVCClass(), answering the class that should be instantiated upon button tap. The parent can answer something generic, and the subclasses answer any class that's appropriate for each to know about.
Have the button tap method instantiate an instance of self.detailVCClass(), rather than a class name literal.
however, I'm just wondering if I can do this in my
MasterCategoryListViewController, obviously without it knowing
anything about what CustomItemController ?
Yes. Why not? However, the one that will be pushed is the MasterCategoryItemViewController, not any subclassing classes of it. So like what you've mentioned in your question, you know that btnAddTapped can be overriden, so do it like that.
OR, you could do something a bit more interesting:
In your MasterCategoryListViewController, have an object of MasterCategoryItemViewController. Then in your CustomListController, apply any subclassing MasterCategoryListViewController class. Next, push that MasterCategoryItemViewController object in your btnAddTapped()
Complete sample:
import UIKit
class ListVC: MasterListVC {
override func viewDidLoad() {
super.viewDidLoad()
self.title = "ListVC"
self.itemVCToBePushed = ItemVC2()
}
}
class MasterListVC: UIViewController {
var itemVCToBePushed: MasterItemVC?
lazy var button: UIButton = {
let button = UIButton(type: .custom)
button.frame = CGRect(x: 100, y: 100, width: 250.0, height: 44.0)
button.setTitle("Test", for: .normal)
button.addTarget(self, action: #selector(self.pushMe), for: .touchUpInside)
button.backgroundColor = .gray
return button
}()
#objc func pushMe() {
guard let itemVCToBePushed = self.itemVCToBePushed else { return }
self.navigationController?.pushViewController(itemVCToBePushed, animated: true)
}
override func viewDidLoad() {
super.viewDidLoad()
self.title = "MasterListVC"
self.view.backgroundColor = .white
self.view.addSubview(self.button)
}
}
/////
class ItemVC: MasterItemVC {
override func viewDidLoad() {
super.viewDidLoad()
self.title = "ItemVC"
}
}
class ItemVC2: MasterItemVC {
override func viewDidLoad() {
super.viewDidLoad()
self.title = "ItemVC2"
}
}
class MasterItemVC: UIViewController {
override func viewDidLoad() {
super.viewDidLoad()
self.title = "MasterItemVC"
self.view.backgroundColor = .white
}
}
I'm having a problem with applying a textField function in terms of a textView.
Previously, I was using a textField and the below code was running smoothly without any problem. Now, I decided to use a textView instead of a textField, so want to change every textField to a textView but don't know how to implement the textField.addtarget() function to a textView. What I want is, initially, when the textView is empty the button color isn't enabled but when there is text in it, the button color should be blue.
I can't find a proper function that contains a #selector to call my main function in the textView functions. I'd appreciate any help. Thank you very much in advance!
override func viewDidLoad() {
super.viewDidLoad()
buttonColor.isEnabled = false
handleTextField()
}
func handleTextField() {
textField.addTarget(self, action: #selector(self.textFieldDidChange), for: UIControlEvents.editingChanged)
} // used to call the main function
#objc func textFieldDidChange() {
if (textView.text != ""){
buttonColor.setTitleColor(UIColor.blue, for: UIControlState.normal)
buttonColor.isEnabled = true
return
}
buttonColor.setTitleColor(UIColor.lightGray, for: UIControlState.normal)
buttonColor.isEnabled = false
}
You have a delegate for it in UITextViewDelegate called textViewDidChange(_:).
class ViewController: UIViewController, UITextViewDelegate {
override func viewDidLoad() {
super.viewDidLoad()
yourTextView.delegate = self
print(locationName) // not important
buttonColor.isEnabled = false // not important
}
//Your other code
func textViewDidChange(textView: UITextView) {
if (textView.text != ""){
buttonColor.setTitleColor(UIColor.blue, for: UIControlState.normal)
buttonColor.isEnabled = true
return
}
buttonColor.setTitleColor(UIColor.lightGray, for: UIControlState.normal)
buttonColor.isEnabled = false
}
}
I am still new to swift and I would ask you for advice. Thank you in advance and sorry for my bad English.
My goal is:
User tap edit button in the table's row. UITextField appears instead cell. After entering value and pressing Return key UITextField disappears again and cell is recalculated.
editButton pressed -> hide priceCell & show UITextField & show keyboard & start editing/entering value (blinking cursor) -> stop editing/entering value execute by pressing Return key -> hide UITextField & shows priceCell & save entered value into array & reload edited row
I use this answer as starting blueprint.
I would like to also use .decimalPad keyboard to easier entering numeric value and limit user to use only numbers (and decimal point), but this exclude use Return key as stop editing, am I right?
I found this possible solution, but it seems to me complex for my problem...
my ViewController:
import UIKit
class PortfolioViewController: UIViewController, UITableViewDelegate, UITableViewDataSource, UITextFieldDelegate, PortfolioCellDelegate {
let getData = GetData()
...
override func viewDidLoad() {
super.viewDidLoad()
cellTableView.delegate = self
cellTableView.dataSource = self
cellTableView.register(UINib(nibName: "PortfolioCell", bundle: nil), forCellReuseIdentifier: "portfolioCell")
self.currencyControl.selectedSegmentIndex = MyVariables.currencyControlSelected
}
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let coinCell = tableView.dequeueReusableCell(withIdentifier: "portfolioCell", for: indexPath) as! PortfolioCell
...
coinCell.delegate = self
return coinCell
}
...
func portfolioButtonPressed(coinCell: PortfolioCell) {
let indexPath = self.cellTableView.indexPathForRow(at: coinCell.center)!
let selectedCell = cellTableView.cellForRow(at: indexPath) as! PortfolioCell
selectedCell.priceCell.isHidden = true
selectedCell.textCell.isHidden = false
selectedCell.textCell.delegate = self
func textFieldDidEndEditing(textField: UITextField) {
let owned: Double = Double(textField.text!)!
if owned >= 0 {
MyVariables.dataArray[indexPath.row].ownedCell = owned
} else {
MyVariables.dataArray[indexPath.row].ownedCell = 0.00
}
selectedCell.priceCell.isHidden = false
selectedCell.textCell.isHidden = true
self.cellTableView.reloadData()
}
func textFieldShouldReturn(textField: UITextField) -> Bool {
selectedCell.textCell.resignFirstResponder()
return true
}
}
...
}
my custom cell:
import UIKit
protocol PortfolioCellDelegate {
func portfolioButtonPressed(coinCell: PortfolioCell)
}
class PortfolioCell: UITableViewCell {
var delegate: PortfolioCellDelegate?
...
#IBAction func editCellPressed(_ sender: UIButton) {
delegate?.portfolioButtonPressed(coinCell: self)
}
...
}
For now when button is pressed proper UITextField shows, but don't dismiss after Return key is pressed.
Or should I change it completely and use tap gestures?
To end editing in any kind of scrollView, simply use this
cellTableView.keyboardDismissMode = .onDrag
or
cellTableView.keyboardDismissMode = .interactive
It will hide keyboard when you interact with the tableView
For number keypad you can add toolbar as a textField's inputAccessoryView. On toolbar add cancel button to dismiss keyboard.
There is two way to go:
1.) Delegate
2.) IQKeyboardManager
1.)
Use UITextFieldDelegate
There is one particular callback named "textFieldShouldEndEditing"
In this method, return true.
2.)
User the IQKeyboardManager one liner library. This library manages all the TextFields and scrollviews automatically. You activate it with one line in AppDelegate so it's easy to use.
https://github.com/hackiftekhar/IQKeyboardManager
Working but not as sleek as want it to be and also I was not capable to make IQKeyboardManager works so I did use inputAccessoryView.
custom cell:
import UIKit
protocol PortfolioCellDelegate {
func portfolioButtonPressed(didSelect coinCell: PortfolioCell)
func portfolioButtonPressed(coinCell:PortfolioCell, editingChangedInTextCell newValue:String)
}
class PortfolioCell: UITableViewCell, UITextFieldDelegate {
var delegate: PortfolioCellDelegate?
...
#IBAction func editCellPressed(_ sender: UIButton) {
textCell.becomeFirstResponder()
delegate?.portfolioButtonPressed(didSelect: self)
}
#IBAction func textCellValueChanged(_ sender: UITextField) {
if (sender.text?.isEmpty)! {
delegate?.portfolioButtonPressed(coinCell: self, editingChangedInTextCell: "XXX")
} else {
let text = sender.text
delegate?.portfolioButtonPressed(coinCell: self, editingChangedInTextCell: text!)
}
}
override func awakeFromNib() {
super.awakeFromNib()
self.textCell.delegate = self
let flexiableSpace = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.flexibleSpace, target: nil, action: nil)
let doneButton = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.done, target: self, action: #selector(self.doneButtonAction))
let toolBar:UIToolbar = UIToolbar(frame: CGRect(x: 0, y: 0, width: frame.size.width, height: 35))
toolBar.barTintColor = UIColor(red:0.15, green:0.69, blue:0.75, alpha:1.0)
toolBar.tintColor = UIColor(red:0.93, green:0.93, blue:0.93, alpha:1.0)
toolBar.setItems([flexiableSpace, doneButton], animated: false)
textCell.inputAccessoryView = toolBar
textCell.keyboardType = UIKeyboardType.decimalPad
}
#objc func doneButtonAction() {
textCell.endEditing(true)
}
...
}
ViewController:
import UIKit
class PortfolioViewController: UIViewController, UITableViewDelegate, UITableViewDataSource, PortfolioCellDelegate {
let getData = GetData()
...
override func viewDidLoad() {
super.viewDidLoad()
cellTableView.delegate = self
cellTableView.dataSource = self
cellTableView.register(UINib(nibName: "PortfolioCell", bundle: nil), forCellReuseIdentifier: "portfolioCell")
self.currencyControl.selectedSegmentIndex = MyVariables.currencyControlSelected
getData.delegate = self
timeStampLabel.text = MyVariables.timeStamp
}
override func viewDidAppear(_ animated: Bool) {
super.viewWillAppear(animated)
self.cellTableView.reloadData()
self.currencyControl.selectedSegmentIndex = MyVariables.currencyControlSelected
self.timeStampLabel.text = MyVariables.timeStamp
}
//MARK: - tableView
/***************************************************************/
...
func portfolioButtonPressed(coinCell: PortfolioCell, editingChangedInTextCell newValue: String) {
let indexPath = self.cellTableView.indexPathForRow(at: coinCell.center)!
let selectedCell = cellTableView.cellForRow(at: indexPath) as! PortfolioCell
selectedCell.priceCell.isHidden = false
selectedCell.textCell.isHidden = true
if newValue != "XXX" {
let owned: Double = Double(newValue)!
MyVariables.dataArray[indexPath.row].ownedCell = owned
}
selectedCell.priceCell.isHidden = false
selectedCell.textCell.isHidden = true
self.cellTableView.reloadRows(at: [indexPath], with: .automatic)
}
func portfolioButtonPressed(didSelect coinCell: PortfolioCell) {
let indexPath = self.cellTableView.indexPathForRow(at: coinCell.center)!
let selectedCell = cellTableView.cellForRow(at: indexPath) as! PortfolioCell
selectedCell.priceCell.isHidden = true
selectedCell.textCell.isHidden = false
}
...
}
It's easy: You should select that table view cell, then enable User Interaction Enabled in the attribute inspector.
I am building an RSS reader using swift and need to implement pull to reload functionality.
Here is how i am trying to do it.
class FirstViewController: UIViewController,
UITableViewDelegate, UITableViewDataSource {
#IBOutlet var refresh: UIScreenEdgePanGestureRecognizer
#IBOutlet var newsCollect: UITableView
var activityIndicator:UIActivityIndicatorView? = nil
override func viewDidLoad() {
super.viewDidLoad()
self.newsCollect.scrollEnabled = true
// Do any additional setup after loading the view, typically from a nib.
if nCollect.news.count <= 2{
self.collectNews()
}
else{
self.removeActivityIndicator()
}
view.addGestureRecognizer(refresh)
}
#IBAction func reload(sender: UIScreenEdgePanGestureRecognizer) {
nCollect.news = News[]()
return newsCollect.reloadData()
}
I am getting :
Property 'self.refresh' not initialized at super.init call
Please help me to understand the behaviour of Gesture recognisers. A working sample code will be a great help.
Thanks.
Pull to refresh is built in iOS. You could do this in swift like
let refreshControl = UIRefreshControl()
override func viewDidLoad() {
super.viewDidLoad()
refreshControl.attributedTitle = NSAttributedString(string: "Pull to refresh")
refreshControl.addTarget(self, action: #selector(self.refresh(_:)), for: .valueChanged)
tableView.addSubview(refreshControl) // not required when using UITableViewController
}
#objc func refresh(_ sender: AnyObject) {
// Code to refresh table view
}
At some point you could end refreshing.
refreshControl.endRefreshing()
A solution with storyboard and Swift:
Open your .storyboard file, select a TableViewController in your storyboard and "Enable" the Table View Controller: Refreshing feature in the Utilities.
Open the associated UITableViewController class and add the following Swift 5 line into the viewDidLoad method.
self.refreshControl?.addTarget(self, action: #selector(refresh), for: UIControl.Event.valueChanged)
Add the following method above the viewDidLoad method
func refresh(sender:AnyObject)
{
// Updating your data here...
self.tableView.reloadData()
self.refreshControl?.endRefreshing()
}
UIRefreshControl is directly supported in each of UICollectionView, UITableView and UIScrollView (requires iOS 10+)!
Each one of these views has a refreshControl instance property, which means that there is no longer a need to add it as a subview in your scroll view, all you have to do is:
#IBOutlet weak var collectionView: UICollectionView!
override func viewDidLoad() {
super.viewDidLoad()
let refreshControl = UIRefreshControl()
refreshControl.addTarget(self, action: #selector(doSomething), for: .valueChanged)
// this is the replacement of implementing: "collectionView.addSubview(refreshControl)"
collectionView.refreshControl = refreshControl
}
#objc func doSomething(refreshControl: UIRefreshControl) {
print("Hello World!")
// somewhere in your code you might need to call:
refreshControl.endRefreshing()
}
Personally, I find it more natural to treat it as a property for scroll view more than adding it as a subview, especially because the only appropriate view to be as a superview for a UIRefreshControl is a scrollview, i.e the functionality of using UIRefreshControl is only useful when working with a scroll view; That's why this approach should be more obvious to set up the refresh control view.
However, you still have the option of using the addSubview based on the iOS version:
if #available(iOS 10.0, *) {
collectionView.refreshControl = refreshControl
} else {
collectionView.addSubview(refreshControl)
}
Swift 4
var refreshControl: UIRefreshControl!
override func viewDidLoad() {
super.viewDidLoad()
refreshControl = UIRefreshControl()
refreshControl.attributedTitle = NSAttributedString(string: "Pull to refresh")
refreshControl.addTarget(self, action: #selector(refresh), for: .valueChanged)
tableView.addSubview(refreshControl)
}
#objc func refresh(_ sender: Any) {
// your code to reload tableView
}
And you could stop refreshing with:
refreshControl.endRefreshing()
Swift 5
private var pullControl = UIRefreshControl()
pullControl.attributedTitle = NSAttributedString(string: "Pull to refresh")
pullControl.addTarget(self, action: #selector(refreshListData(_:)), for: .valueChanged)
if #available(iOS 10.0, *) {
tableView.refreshControl = pullControl
} else {
tableView.addSubview(pullControl)
}
// Actions
#objc private func refreshListData(_ sender: Any) {
self.pullControl.endRefreshing() // You can stop after API Call
// Call API
}
In Swift use this,
If you wants to have pull to refresh in WebView,
So try this code:
override func viewDidLoad() {
super.viewDidLoad()
addPullToRefreshToWebView()
}
func addPullToRefreshToWebView(){
var refreshController:UIRefreshControl = UIRefreshControl()
refreshController.bounds = CGRectMake(0, 50, refreshController.bounds.size.width, refreshController.bounds.size.height) // Change position of refresh view
refreshController.addTarget(self, action: Selector("refreshWebView:"), forControlEvents: UIControlEvents.ValueChanged)
refreshController.attributedTitle = NSAttributedString(string: "Pull down to refresh...")
YourWebView.scrollView.addSubview(refreshController)
}
func refreshWebView(refresh:UIRefreshControl){
YourWebView.reload()
refresh.endRefreshing()
}
Anhil's answer helped me a lot.
However, after experimenting further I noticed that the solution suggested sometimes causes a not-so-pretty UI glitch.
Instead, going for this approach* did the trick for me.
*Swift 2.1
//Create an instance of a UITableViewController. This will host your UITableView.
private let tableViewController = UITableViewController()
//Add tableViewController as a childViewController and set its tableView property to your UITableView.
self.addChildViewController(self.tableViewController)
self.tableViewController.tableView = self.tableView
self.refreshControl.addTarget(self, action: "refreshData:", forControlEvents: .ValueChanged)
self.tableViewController.refreshControl = self.refreshControl
Details
Xcode Version 10.3 (10G8), Swift 5
Features
Ability to make "pull to refresh" programmatically
Protection from multi- "pull to refresh" events
Ability to continue animating of the activity indicator when view controller switched (e.g. in case of TabController)
Solution
import UIKit
class RefreshControl: UIRefreshControl {
private weak var actionTarget: AnyObject?
private var actionSelector: Selector?
override init() { super.init() }
convenience init(actionTarget: AnyObject?, actionSelector: Selector) {
self.init()
self.actionTarget = actionTarget
self.actionSelector = actionSelector
addTarget()
}
private func addTarget() {
guard let actionTarget = actionTarget, let actionSelector = actionSelector else { return }
addTarget(actionTarget, action: actionSelector, for: .valueChanged)
}
required init?(coder aDecoder: NSCoder) { super.init(coder: aDecoder) }
func endRefreshing(deadline: DispatchTime? = nil) {
guard let deadline = deadline else { endRefreshing(); return }
DispatchQueue.global(qos: .default).asyncAfter(deadline: deadline) { [weak self] in
DispatchQueue.main.async { self?.endRefreshing() }
}
}
func refreshActivityIndicatorView() {
guard let selector = actionSelector else { return }
let _isRefreshing = isRefreshing
removeTarget(actionTarget, action: selector, for: .valueChanged)
endRefreshing()
if _isRefreshing { beginRefreshing() }
addTarget()
}
func generateRefreshEvent() {
beginRefreshing()
sendActions(for: .valueChanged)
}
}
public extension UIScrollView {
private var _refreshControl: RefreshControl? { return refreshControl as? RefreshControl }
func addRefreshControll(actionTarget: AnyObject?, action: Selector, replaceIfExist: Bool = false) {
if !replaceIfExist && refreshControl != nil { return }
refreshControl = RefreshControl(actionTarget: actionTarget, actionSelector: action)
}
func scrollToTopAndShowRunningRefreshControl(changeContentOffsetWithAnimation: Bool = false) {
_refreshControl?.refreshActivityIndicatorView()
guard let refreshControl = refreshControl,
contentOffset.y != -refreshControl.frame.height else { return }
setContentOffset(CGPoint(x: 0, y: -refreshControl.frame.height), animated: changeContentOffsetWithAnimation)
}
private var canStartRefreshing: Bool {
guard let refreshControl = refreshControl, !refreshControl.isRefreshing else { return false }
return true
}
func startRefreshing() {
guard canStartRefreshing else { return }
_refreshControl?.generateRefreshEvent()
}
func pullAndRefresh() {
guard canStartRefreshing else { return }
scrollToTopAndShowRunningRefreshControl(changeContentOffsetWithAnimation: true)
_refreshControl?.generateRefreshEvent()
}
func endRefreshing(deadline: DispatchTime? = nil) { _refreshControl?.endRefreshing(deadline: deadline) }
}
Usage
// Add refresh control to UICollectionView / UITableView / UIScrollView
private func setupTableView() {
let tableView = UITableView()
// ...
tableView.addRefreshControll(actionTarget: self, action: #selector(refreshData))
}
#objc func refreshData(_ refreshControl: UIRefreshControl) {
tableView?.endRefreshing(deadline: .now() + .seconds(3))
}
// Stop refreshing in UICollectionView / UITableView / UIScrollView
tableView.endRefreshing()
// Simulate pull to refresh in UICollectionView / UITableView / UIScrollView
tableView.pullAndRefresh()
Full Sample
Do not forget to add the solution code here
import UIKit
class ViewController: UIViewController {
private weak var tableView: UITableView?
override func viewDidLoad() {
super.viewDidLoad()
setupTableView()
}
private func setupTableView() {
let tableView = UITableView()
view.addSubview(tableView)
tableView.translatesAutoresizingMaskIntoConstraints = false
tableView.topAnchor.constraint(equalTo: view.topAnchor).isActive = true
tableView.leftAnchor.constraint(equalTo: view.leftAnchor).isActive = true
tableView.rightAnchor.constraint(equalTo: view.rightAnchor).isActive = true
tableView.bottomAnchor.constraint(equalTo: view.bottomAnchor).isActive = true
tableView.dataSource = self
tableView.delegate = self
tableView.addRefreshControll(actionTarget: self, action: #selector(refreshData))
self.tableView = tableView
}
}
extension ViewController {
#objc func refreshData(_ refreshControl: UIRefreshControl) {
print("refreshing")
tableView?.endRefreshing(deadline: .now() + .seconds(3))
}
}
extension ViewController: UITableViewDataSource {
func numberOfSections(in tableView: UITableView) -> Int { return 1 }
func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int { return 20 }
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let cell = UITableViewCell()
cell.textLabel?.text = "\(indexPath)"
return cell
}
}
extension ViewController: UITableViewDelegate {
func tableView(_ tableView: UITableView, didSelectRowAt indexPath: IndexPath) {
tableView.pullAndRefresh()
}
}
What the error is telling you, is that refresh isn't initialized. Note that you chose to make refresh not optional, which in Swift means that it has to have a value before you call super.init (or it's implicitly called, which seems to be your case). Either make refresh optional (probably what you want) or initialize it in some way.
I would suggest reading the Swift introductory documentation again, which covers this in great length.
One last thing, not part of the answer, as pointed out by #Anil, there is a built in pull to refresh control in iOS called UIRefresControl, which might be something worth looking into.
I built a RSS feed app in which I have a Pull To refresh feature that originally had some of the problems listed above.
But to add to the users answers above, I was looking everywhere for my use case and could not find it. I was downloading data from the web (RSSFeed) and I wanted to pull down on my tableView of stories to refresh.
What is mentioned above cover the right areas but with some of the problems people are having, here is what I did and it works a treat:
I took #Blankarsch 's approach and went to my main.storyboard and select the table view to use refresh, then what wasn't mentioned is creating IBOutlet and IBAction to use the refresh efficiently
//Created from main.storyboard cntrl+drag refresh from left scene to assistant editor
#IBOutlet weak var refreshButton: UIRefreshControl
override func viewDidLoad() {
......
......
//Include your code
......
......
//Is the function called below, make sure to put this in your viewDidLoad
//method or not data will be visible when running the app
getFeedData()
}
//Function the gets my data/parse my data from the web (if you havnt already put this in a similar function)
//remembering it returns nothing, hence return type is "-> Void"
func getFeedData() -> Void{
.....
.....
}
//From main.storyboard cntrl+drag to assistant editor and this time create an action instead of outlet and
//make sure arguments are set to none and note sender
#IBAction func refresh() {
//getting our data by calling the function which gets our data/parse our data
getFeedData()
//note: refreshControl doesnt need to be declared it is already initailized. Got to love xcode
refreshControl?.endRefreshing()
}
Hope this helps anyone in same situation as me
func pullToRefresh(){
let refresh = UIRefreshControl()
refresh.addTarget(self, action: #selector(handleTopRefresh(_:)), for: .valueChanged )
refresh.tintColor = UIColor.appBlack
self.tblAddressBook.addSubview(refresh)
}
#objc func handleTopRefresh(_ sender:UIRefreshControl){
self.callAddressBookListApi(isLoaderRequired: false)
sender.endRefreshing()
}
I suggest to make an Extension of pull To Refresh to use in every class.
1) Make an empty swift file : File - New - File - Swift File.
2) Add the Following
// AppExtensions.swift
import Foundation
import UIKit
var tableRefreshControl:UIRefreshControl = UIRefreshControl()
//MARK:- VIEWCONTROLLER EXTENSION METHODS
public extension UIViewController
{
func makePullToRefreshToTableView(tableName: UITableView,triggerToMethodName: String){
tableRefreshControl.attributedTitle = NSAttributedString(string: "TEST: Pull to refresh")
tableRefreshControl.backgroundColor = UIColor.whiteColor()
tableRefreshControl.addTarget(self, action: Selector(triggerToMethodName), forControlEvents: UIControlEvents.ValueChanged)
tableName.addSubview(tableRefreshControl)
}
func makePullToRefreshEndRefreshing (tableName: String)
{
tableRefreshControl.endRefreshing()
//additional codes
}
}
3) In Your View Controller call these methods as :
override func viewWillAppear(animated: Bool) {
self.makePullToRefreshToTableView(bidderListTable, triggerToMethodName: "pullToRefreshBidderTable")
}
4) At some point you wanted to end refreshing:
func pullToRefreshBidderTable() {
self.makePullToRefreshEndRefreshing("bidderListTable")
//Code What to do here.
}
OR
self.makePullToRefreshEndRefreshing("bidderListTable")
For the pull to refresh i am using
DGElasticPullToRefresh
https://github.com/gontovnik/DGElasticPullToRefresh
Installation
pod 'DGElasticPullToRefresh'
import DGElasticPullToRefresh
and put this function into your swift file and call this funtion from your
override func viewWillAppear(_ animated: Bool)
func Refresher() {
let loadingView = DGElasticPullToRefreshLoadingViewCircle()
loadingView.tintColor = UIColor(red: 255.0/255.0, green: 255.0/255.0, blue: 255.0/255.0, alpha: 1.0)
self.table.dg_addPullToRefreshWithActionHandler({ [weak self] () -> Void in
//Completion block you can perfrom your code here.
print("Stack Overflow")
self?.table.dg_stopLoading()
}, loadingView: loadingView)
self.table.dg_setPullToRefreshFillColor(UIColor(red: 255.0/255.0, green: 57.0/255.0, blue: 66.0/255.0, alpha: 1))
self.table.dg_setPullToRefreshBackgroundColor(self.table.backgroundColor!)
}
And dont forget to remove reference while view will get dissapear
to remove pull to refresh put this code in to your
override func viewDidDisappear(_ animated: Bool)
override func viewDidDisappear(_ animated: Bool) {
table.dg_removePullToRefresh()
}
And it will looks like
Happy coding :)
You can achieve this by using few lines of code. So why you are going to stuck in third party library or UI.
Pull to refresh is built in iOS. You could do this in swift like
var pullControl = UIRefreshControl()
override func viewDidLoad() {
super.viewDidLoad()
pullControl.attributedTitle = NSAttributedString(string: "Pull to refresh")
pullControl.addTarget(self, action: #selector(pulledRefreshControl(_:)), for: UIControl.Event.valueChanged)
tableView.addSubview(pullControl) // not required when using UITableViewController
}
#objc func pulledRefreshControl(sender:AnyObject) {
// Code to refresh table view
}
you can use this subclass of tableView:
import UIKit
protocol PullToRefreshTableViewDelegate : class {
func tableViewDidStartRefreshing(tableView: PullToRefreshTableView)
}
class PullToRefreshTableView: UITableView {
#IBOutlet weak var pullToRefreshDelegate: AnyObject?
private var refreshControl: UIRefreshControl!
private var isFirstLoad = true
override func willMoveToSuperview(newSuperview: UIView?) {
super.willMoveToSuperview(newSuperview)
if (isFirstLoad) {
addRefreshControl()
isFirstLoad = false
}
}
private func addRefreshControl() {
refreshControl = UIRefreshControl()
refreshControl.attributedTitle = NSAttributedString(string: "Pull to refresh")
refreshControl.addTarget(self, action: "refresh", forControlEvents: .ValueChanged)
self.addSubview(refreshControl)
}
#objc private func refresh() {
(pullToRefreshDelegate as? PullToRefreshTableViewDelegate)?.tableViewDidStartRefreshing(self)
}
func endRefreshing() {
refreshControl.endRefreshing()
}
}
1 - in interface builder change the class of your tableView to PullToRefreshTableView or create a PullToRefreshTableView programmatically
2 - implement the PullToRefreshTableViewDelegate in your view controller
3 - tableViewDidStartRefreshing(tableView: PullToRefreshTableView) will be called in your view controller when the table view starts refreshing
4 - call yourTableView.endRefreshing() to finish the refreshing
This is how I made it work using Xcode 7.2 which I think is a major bug. I'm using it inside my UITableViewController inside my viewWillAppear
refreshControl = UIRefreshControl()
refreshControl!.addTarget(self, action: "configureMessages", forControlEvents: .ValueChanged)
refreshControl!.beginRefreshing()
configureMessages()
func configureMessages() {
// configuring messages logic here
self.refreshControl!.endRefreshing()
}
As you can see, I literally have to call the configureMessage() method after setting up my UIRefreshControl then after that, subsequent refreshes will work fine.
For 2023, this simple
override func viewDidAppear(_ animated: Bool) {
super.viewDidAppear(animated)
your data source = latest ...
table.reloadData()
table.refreshControl = UIRefreshControl()
table.refreshControl?.addTarget(self,
action: #selector(pulldown), for: .valueChanged)
table.refreshControl?.tintColor = .clear
}
#objc func pulldown() {
your data source = latest ...
table.reloadData()
DispatchQueue.main.async { self.table.refreshControl?.endRefreshing() }
}
Very often, you don't want the "spinner". This line is the easiest way to hide the spinner:
table.refreshControl?.tintColor = .clear
That's it.
If (for some obscure reason) you truly want to subclass UIRefreshControl, there's an excellent recent answer here that shows how to do that.
Others Answers Are Correct But for More Detail check this Post Pull to Refresh
Enable refreshing in Storyboard
When you’re working with a UITableViewController, the solution is fairly simple: First, Select the table view controller in your storyboard, open the attributes inspector, and enable refreshing:
A UITableViewController comes outfitted with a reference to a UIRefreshControl out of the box. You simply need to wire up a few things to initiate and complete the refresh when the user pulls down.
Override viewDidLoad()
In your override of viewDidLoad(), add a target to handle the refresh as follows:
override func viewDidLoad() {
super.viewDidLoad()
// Do any additional setup after loading the view, typically from a nib.
self.refreshControl?.addTarget(self, action: "handleRefresh:", forControlEvents: UIControlEvents.ValueChanged)
}
Since I’ve specified “handleRefresh:” (note the colon!) as the
action argument, I need to define a function in this
UITableViewController class with the same name. Additionally, the
function should take one argument
We’d like this action to be called for the UIControlEvent called
ValueChanged
Don't forget to call refreshControl.endRefreshing()
For more information Please go to mention Link and all credit goes to that post
Due to less customisability, code duplication and bugs which come with pull to refresh control, I created a library PullToRefreshDSL which uses DSL pattern just like SnapKit
// You only have to add the callback, rest is taken care of
tableView.ptr.headerCallback = { [weak self] in // weakify self to avoid strong reference
DispatchQueue.main.asyncAfter(deadline: .now() + .seconds(2)) { // your network call
self?.tableView.ptr.isLoadingHeader = false // setting false will hide the view
}
}
You only have to add magical keyword ptr after any UIScrollView subclass i.e. UITableView/UICollectionView
You dont have to download the library, you can explore and modify the source code, I am just pointing towards a possible implementation of pull to refresh for iOS