I have a decimal column price. I got two prices: 10.00 and 11.50
I need to transform
10.00 into 1000
11.50into 1150
How I can do that in controller?
Just multiply the number by 100 and then do to_i on the result:
f = 10.0
n = (f * 100).to_i
If it's a string:
"10.00".gsub(".", "")
If it's a decimal number
(10.00 * 100).to_i == 1000
(10.00).to_floor
Convert to string, replace dot, convert to int
my_number = 10.56
my_number_without_decimal_point = my_number.to_s().gsub(".", "").to_i()
puts "#{my_number_without_decimal_point}"
prints 1056
Related
I am attempting to solve an edge case to a task related to a personal project.
It is to determine the unit price of a service and is made up of the total_amount and cost.
Examples include:
# 1
unit_price = 300 / 1000 # = 0.3
# 2
unit_price = 600 / 800 # = 0.75
# 3
unit_price = 500 / 1600 # = 0.3125
For 1 and 2, the unit_prices can stay as they are. For 3, rounding to 2 decimal places will be sufficient, e.g. (500 / 1600).round(2)
The issue arises when the float becomes long:
# 4
unit_price = 400 / 56000 # = 0.007142857142857143
What's apparent is that the float is rather long. Rounding to the first significant figure is the aim in such instances.
I've thought about using a regular expression to match the first non-zero decimal, or to find the length of the second part and apply some logic:
unit_price.match ~= /[^.0]/
unit_price.to_s.split('.').last.size
Any assistance would be most welcome
One should use BigDecimal for this kind of computation.
require 'bigdecimal'
bd = BigDecimal((400.0 / 56000).to_s)
#⇒ 0.7142857142857143e-2
bd.exponent
#⇒ -2
Example:
[10_000.0 / 1_000, 300.0 / 1_000, 600.0 / 800,
500.0 / 1_600, 400.0 / 56_000].
map { |bd| BigDecimal(bd.to_s) }.
map do |bd|
additional = bd.exponent >= 0 ? 0 : bd.exponent + 1
bd.round(2 - additional) # THIS
end.
map(&:to_f)
#⇒ [10.0, 0.3, 0.75, 0.31, 0.007]
You can detect the length of the zeros string with regex. It's a bit ugly, but it works:
def significant_round(number, places)
match = number.to_s.match(/\.(0+)/)
return number unless match
zeros = number.to_s.match(/\.(0+)/)[1].size
number.round(zeros+places)
end
pry(main)> significant_round(3.14, 1)
=> 3.14
pry(main)> significant_round(3.00014, 1)
=> 3.0001
def my_round(f)
int = f.to_i
f -= int
coeff, exp = ("%e" % f).split('e')
"#{coeff.to_f.round}e#{exp}".to_f + int
end
my_round(0.3125)
#=> 0.3
my_round(-0.3125)
#=> -0.3
my_round(0.0003625)
#=> 0.0004
my_round(-0.0003625)
#=> -0.0004
my_round(42.0031)
#=> 42.003
my_round(-42.0031)
#=> -42.003
The steps are as follows.
f = -42.0031
int = f.to_i
#=> -42
f -= int
#=> -0.0031000000000034333
s = "%e" % f
#=> "-3.100000e-03"
coeff, exp = s.split('e')
#=> ["-3.100000", "-03"]
c = coeff.to_f.round
#=> -3
d = "#{c}e#{exp}"
#=> "-3e-03"
e = d.to_f
#=> -0.003
e + int
#=> -42.003
To instead keep only the most significant digit after rounding, change the method to the following.
def my_round(f)
coeff, exp = ("%e" % f).split('e')
"#{coeff.to_f.round}e#{exp}".to_f
end
If f <= 0 this returns the same as the earlier method. Here is an example when f > 0:
my_round(-42.0031)
#=> -40.0
I am trying to divide Time in float form (hh.mm) by an integer.
For example 1.30 by 2 must give 00.45.
Is there any simple way to do this?
Using a float to express h.mm is a bit unusual. You would typically use strings for formatting.
However, I'd start by extracting hours and minutes from the float value. To do so, I would convert the float to a string using format:
time = 1.3
time_str = format('%.2f', time)
#=> "1.30"
Then I would split the string at . to get the hour part and minutes part and call to_i to convert them to actual integers: (I'm using map here, you could also call h = h.to_i / m = m.to_i afterwards)
h, m = time_str.split('.').map(&:to_i)
h #=> 1
m #=> 30
Now that we have the numbers 1 and 30 as integers, we can easily calculate the total duration in minutes:
duration = h * 60 + m
#=> 90
I would then divide the duration by 2 (or whatever value):
duration /= 2
#=> 45
and convert it back to hours and minutes using divmod: (it returns both values at once)
h, m = duration.divmod(60)
h #=> 0
m #=> 45
We can format these as a string:
format('%02d.%02d', h, m)
#=> "00.45"
or convert it back to a float:
time = h + m.fdiv(100)
#=> 0.45
Which can be formatted like this:
format('%05.2f', time)
#=> "00.45"
time = 1.3
divisor = 2
hr, min = (time.fdiv(divisor)).divmod(1)
#=> [0, 0.65]
min = (60 * min).round
#=> 39
"%02d.%02d" % [hr, min]
#=> "00.39"
Another example.
time = 1005
divisor = 5
hr, min = (time.fdiv(divisor)).divmod(1)
#=> [201, 0.0]
"%02d.%02d" % [hr, (60 * min).round]
#=> "201.00"
See Integer#fdiv, Float#fdiv, Integer#divmod and Integer#round. divmod is an extremely useful method that, for reasons I don't understand, seems to be under-used.
Maybe you can split into an array an then:
n = 2
[1, 30].then { |h, m| [h / n, (m + h % n * 60) / n]}
#=> [0, 45]
For splitting:
num = 1.3
('%.2f' % num).split('.').map(&:to_i) #=> [1, 30]
You can try the following :
num = 1.3
splitted_values = ('%.2f' % num).split('.').map(&:to_i) => [1, 30]
((splitted_values[0] * 60) / 2) + (splitted_values[1] / 2 ) => 45
I have one program downloaded from internet and need to get each digit printed out from a three digit number. For example:
Input: 123
Expected Output:
1
2
3
I have 598
Need to Get:
5
9
8
I try using this formula but the problem is when number is with decimal function failed:
FIRST_DIGIT = (number mod 1000) / 100
SECOND_DIGIT = (number mod 100) / 10
THIRD_DIGIT = (number mod 10)
Where number is the above example so here is calulation:
FIRST_DIGIT = (598 mod 1000) / 100 = 5,98 <== FAILED...i need to get 5 but my program shows 0 because i have decimal point
SECOND_DIGIT = (598 mod 100) / 10 = 9,8 <== FAILED...i need to get 9 but my program shows 0 because i have decimal point
THIRD_DIGIT = (598 mod 10) = 8 <== CORRECT...i get from program output number 8 and this digit is correct.
So my question is is there sample or more efficient code that get each digit from number without decimal point? I don't want to use round to round nearest number because sometime it fill failed if number is larger that .5.
Thanks
The simplest solution is to use integer division (\) instead of floating point division (/).
If you replace each one of your examples with the backslash (\) instead of forward slash (/) they will return integer values.
FIRST_DIGIT = (598 mod 1000) \ 100 = 5
SECOND_DIGIT = (598 mod 100) \ 10 = 9
THIRD_DIGIT = (598 mod 10) = 8
You don't have to do any fancy integer calculations as long as you pull it apart from a string:
INPUT X
X$ = STR$(X)
FOR Z = 1 TO LEN(X$)
PRINT MID$(X$, Z, 1)
NEXT
Then, for example, you could act upon each string element:
INPUT X
X$ = STR$(X)
FOR Z = 1 TO LEN(X$)
Q = VAL(MID$(X$, Z, 1))
N = N + 1
PRINT "Digit"; N; " equals"; Q
NEXT
Additionally, you could tear apart the string character by character:
INPUT X
X$ = STR$(X)
FOR Z = 1 TO LEN(X$)
SELECT CASE MID$(X$, Z, 1)
CASE " ", ".", "+", "-", "E", "D"
' special char
CASE ELSE
Q = VAL(MID$(X$, Z, 1))
N = N + 1
PRINT "Digit"; N; " equals"; Q
END SELECT
NEXT
I'm no expert in Basic but looks like you have to convert floating point number to Integer. A quick google search told me that you have to use Int(floating_point_number) to convert float to integer.
So
Int((number mod 100)/ 10)
should probably the one you are looking for.
And, finally, all string elements could be parsed:
INPUT X
X$ = STR$(X)
PRINT X$
FOR Z = 1 TO LEN(X$)
SELECT CASE MID$(X$, Z, 1)
CASE " "
' nul
CASE "E", "D"
Exponent = -1
CASE "."
Decimal = -1
CASE "+"
UnaryPlus = -1
CASE "-"
UnaryNegative = -1
CASE ELSE
Q = VAL(MID$(X$, Z, 1))
N = N + 1
PRINT "Digit"; N; " equals"; Q
END SELECT
NEXT
IF Exponent THEN PRINT "There was an exponent."
IF Decimal THEN PRINT "There was a decimal."
IF UnaryPlus THEN PRINT "There was a plus sign."
IF UnaryNegative THEN PRINT "There was a negative sign."
I'm looking for a rails function that could return the number to the nearest power of ten(10,100,1000), and also need to support number between 0 and 1 (0.1, 0.01, 0.001):
round(9) = 10
round(19) = 10
round(79) = 100
round(812.12) = 1000
round(0.0321) = 0.01
round(0.0921) = 0.1
I've looking on : Round number down to nearest power of ten
the accepted answer using the length of the string, that can't applied to number between 0 and 1.
updated
Round up to nearest power of 10 this one seems great. But I still can't make it work in rails.
I'm not sure about any function which automatically rounds the number to the nearest power of ten. You can achieve it by running the following code:
def rounded_to_nearest_power_of_ten(value)
abs_value = value.abs
power_of_ten = Math.log10(abs_value)
upper_limit = power_of_ten.ceil
lower_limit = power_of_ten.floor
nearest_value = (10**upper_limit - abs_value).abs > (10**lower_limit - abs_value).abs ? 10**lower_limit : 10**upper_limit
value > 0 ? nearest_value : -1*nearest_value
end
Hope this helps.
Let's simplify your problem to the following form - let the input numbers be in the range [0.1, 1), how would rounding of such numbers look like then?
The answer would be simple - for numbers smaller than 0.5 we would return the number 0.1, for larger numbers it would be 1.0.
All we have to do is to make sure that our number will be in that range. We will "move" decimal separator and remember how many moves we made in second variable. This operation is called normalization.
def normalize(fraction)
exponent = 0
while fraction < (1.0/10.0)
fraction *= 10.0
exponent -= 1
end
while fraction >= 1.0
fraction /= 10.0
exponent += 1
end
[fraction, exponent]
end
Using above code you can represent any floating number as a pair of normalized fraction and exponent in base 10. To recreate original number we will move decimal point in opposite direction using formula
original = normalized * base^{exponent}
With data property normalized we can use it in our simple rounding method like that:
def round(number)
fraction, exponent = normalize(number)
if fraction < 0.5
0.1 * 10 ** exponent
else
1.0 * 10 ** exponent
end
end
if the number is >= 1.0, this should work.
10 ** (num.floor.to_s.size - ( num.floor.to_s[0].to_i > 4 ? 0 : 1))
Try this:
def round_tenth(a)
if a.to_f >= 1
return 10 ** (a.floor.to_s.size - ( a.floor.to_s[0].to_i > 4 ? 0 : 1))
end
#a = 0.0392
c = a.to_s[2..a.to_s.length]
b = 0
c.split('').each_with_index do |s, i|
if s.to_i != 0
b = i + 1
break
end
end
arr = Array.new(100, 0)
if c[b-1].to_i > 4
b -= 1
if b == 0
return 1
end
end
arr[b-1] = 1
return ("0." + arr.join()).to_f
end
class Numeric
def name
def helper x, y, z
num = self.abs
r = 1
while true
result = nil
if num.between?(x, y)
if num >= y/2.0
result = y.round(r+1)
else
result = x.round(r)
end
return self.negative? ? -result : result
end
x *= z; y *= z; r += 1
end
end
if self.abs < 1
helper 0.1, 1, 0.1
else
helper 1, 10, 10
end
end
end
Example
-0.049.name # => -0.01
12.name # => 10
and so on, you are welcome!
I need a function which return the product of numbers in the string:
SomeFunc("1234") -> 1 * 2 * 3 * 4 = 24
Here is my code:
lists:foldr(fun(X, Y) -> X * Y end, 1, "1234").
But I get 6497400.
Why and how can I fix the code?
Your code is multiplying the ascii codes of the characters, i.e. 49*50*51*52. In order to get your desired result, use
lists:foldr(fun(X, Y) -> (X-$0)*Y end, 1, "1234")
where $0 is the ASCII code for the character '0'.