I want to discover all wifi clients in wifi area. I want to use sharp-snmp or any
code that configure the access point to send probe request perodically and then I want to read probe response and get the information about the Wi-fi clients(mobile and laptop)
My Question:
Is it possible to use C# or any programing langauge to access the access point
and do what I want?
Thank you in advance for your help
I found that the best way to access and program access-point is by using the open source firmware like OpenWRT. It is a Linux base distribution.there are a cheap device can be use such as linksys WRT.
Related
I want to capture and send some packets to the access point for testing purposes. I have the packet captures made via wireshark but I do not know how to proceed to be able to send these packets from my macbook.
I tried things like scapy, colasoft etc, but they do not seem to work as they require an external wifi adapter to be able to relay these packets outwards.
Two main questions:
Is it possible to send custom packets from macbook to a required access point. (Without using external network adapter).
If yes, what are some tooling/Scripting options that I can look at ? Any recommendations?
I am networking novice so please pardon me if the question is trivial. Thank you!
Your builtin Wifi adapter likely does not support Wifi injection.
You can check this by googling the Wifi chip that is within your computer (there are various methods to get that info depending on your OS) whether it supports Wifi injection or not.
So yeah, you'll likely need an external card (check the specs before buying it)
Is it possible to access my Cisco router details like Name,Model,IP Address,Connection status etc from my iOS mobile.
I'm even ready to write small mobile app in iOS to get all router details.
Since I have just started learning in iOS, don't know if any library already exists for above task.
If my router does not work or gets hang.. I even want to try for restart of router using my mobile.
If example code exist, it will be very useful.
Like Cisco already has andriod and iOS app for same above function but dont want to use this app and want to write my own app with limited features only.
(http://www.addictivetips.com/mobile/cisco-connect-express-manage-router-settings-remotely-android-ios/)
Thanks,
Accessing network gear is best done by using SNMP. Cisco has extremely rich management/monitoring capabilities via SNMP and all of their MIBs are publicly available here.
Almost all Cisco gear supports the SNMPv2-SMI MIB (the 1.3.6.1.2.1 OID) so querying things like sysName, sysLocation, sysContact, sysDescription, sysUpTime should be very easy. This MIB even supports tables for listing all the interfaces and IP addresses and has a whole lot of other things that might be of interest to you.
If you have SNMP write access on the device then you can even make config changes and perform management functions like rebooting or bringing an interface up/down.
There are a few SNMP libraries for ObjectiveC and I think Net-SNMP is the most popular (It's not .net even though the title suggests that).
If you are new to SNMP then I suggest starting simple by querying easy objects like 1.3.6.1.2.1.1.5 (sysName) and 1.3.6.1.2.1.1.6 (sysLocation) before trying to jump into tables like 1.3.6.1.2.1.2.2 (ifTable)
Remember, you don't have to stick with the standard MIBs you can download all of the custom ones that are particular to your device which will give you incredible amounts of flexibility.
You could use a screen-scraping technique to telnet or ssh to the Cisco device and parse the "show version" output. This will give you some of the information you need. For others, like IP addresses, you can use "show ip interface brief", "show cdp neighbors" etc. as you need.
Keep security in mind: make sure that telnet/ssh credentials are adequately protected in your app's settings, and try to restrict your commands to those that do not need privileged access on the Cisco device.
Be aware that Cisco devices have a small pool of available VTYs, and every telnet/ssh access from your app will use up one VTY. So if you have for example 30 guys wanting to use the access the device simultaneously from their apps, some of those instances are not going to get access to the device.
If this is a concern, SNMP is a better and more scalable option as suggested by previous answer. Make sure that you (a) have a read-only community string configured on the device, and (b) use only the ro community string from the app.
By means of being thorough i was wondering if someone could tell me if I need an ethernet/wifi shield to be able to use POSTGET requests using my arduino.
I've got an NFC shield and I need to send the data stored on the tag to my web server.
You can't do it directly, but if you're planning to use USB, you can
send data using the various serial commands to the PC you're connected
to. You'll need a program written in your language of choice on the PC
listening to the arduino and that program can submit your GET request
for you.
Or in other words, you can fake it, but an ethernet capability would
probably be better & easier.
Copied from a post I found in the Arduino forums
I have an embedded device that can be controlled by JSON over UDP. I am currently performing this via an iOS App, and everything works great.
I am now wanting to be able to also control my device from a remote location. And am wanting to use Azure to perform this task. I envision that I will set up an Azure Website which will enable me to select options which then send the JSON to my device, which is behind a firewall.
My question is which of the Azure Services should I be looking into? Also, what is the best way to get the JSON packet to the device behind the firewall (I do not want to use port forwarding).
In general, to avoid an attack surface from outside your LAN (where you have your embedded device), the better solution is to open and output connection from embedded device to the cloud and to leave it open so that it can send and receive data/command.
In this case, on Azure you can use the Service Bus (queue, topic/subscription or event hub) to send/receive with AMQP protocol but it is strictly related to your device and capabilities.
Can you share more information on it ? How much it is a constrained device or a more power device with an high level OS (Linux, Windows, ...) ?
Paolo Patierno
About using Amqp on devices running android is very tedious. The java implementation in dalvik is missing a lot of required apis to be there.
By the way, do you know where we can find information about related path segments to use in amqp pure syntax in Azure, to interact with IoT-Hub end-points. Like for queue for example, we can have :
amqps://:#.servicebus.windows.net/
Thanks
I want to be able to show (by device) open/blocked status for a given protocol between two devices/ports on a network. In other words, I need to output a list of network devices (firewalls & switches) between Server A and Server B and indicate whether the request should (according to each device's rules) be allowed through or blocked.
I'm starting with the Cisco networking devices, which are centrally managed by Cisco's Security Manager (CSM) application (version 4.2). I'm new to network management automation programming and want to make sure I'm not overlooking an obvious best way to handle this.
So far it's looking like I'll need to periodically export and ETL device rules out of CSM (they have a perl script that I can call to do this I believe) and into a separate database, then write some custom SQL code to determine which devices on a route between two hosts/ports will allow or block traffic of the given protocol?
Am I on the right track, or is there a better way to go about this?
If I understood your question, I think you can run a TCL script inside the Cisco equipments do collect the necessary information and transfer it to a central server, form there import it to a database and then correlate that information.
Hope that helps you in your work.