I can't figure out how to copy from vim, and paste to another console tab.
For instance, I'm using the preconfigured nvimdocker / ansible-neovim-pyright container. I did try:
set mouse= I can copy/paste with middle click, but I get the column with line numbers in the clipboard. Makes it unpracticable to copy few lines of script.
set mouse=nv This is great, I can select the text without the line numbers. Potentially right-click->Copy. But none of the * (highlight clipboard) nor + (system clipboard) registers are working. (None of the middle-click or explicit paste will work).
Obviously, it's not possible to access the system clipboard from remote, and xclip cannot help. I think the problem is similar when using a remote nvim through SSH (with no X redirection).
But how could I have the 'highlight' clipboard ? Is there maybe a (n)vim command to temporarily disable the left column with numbers/git/modifs/coc-errors ?
Thanks,
In Notepad++, view Settings > Shortcut Mapper > Scintilla commands. The command SCI_LINECOPY, currently assigned to Ctrl + Shift + X, copies the current line to the clipboard for pasting elsewhere. Very nice!
Does Visual Studio 2019 have something similar under Tools > Options > Environment > Keyboard? The Edit.Duplicate command, which copies the current line into the editor though not to the clipboard, is excellent but only superficially similar to SCI_LINECOPY.
For me, without any additional adjustment, this is a normal process as shown in the pictures below.
When the cursor is in the line (1), I can copy it to the clipboard without selecting the text first using Strg+C.
Followed of course by Strg+V (2) or optional by step (3).
In Visual Studio Code Ctrl+V is not working on editor.
However from the command palette Ctrl+Shift+V is working.
I´ve had this problem when I enabled the "VIM" plugin for VSCode.
After uninstalling it, the problem was fixed.
Open the keyboard shortcuts preferences by pressing CTRL + SHIFT + P and search for open keyboard shortcuts file.
Then, search for the editor.action.clipboardPasteAction property. In your case, it might be CTRL+SHIFT+V. Try changing it to Ctrl + V. Like so:
Solution as of 2022
You could also CTRL + SHIFT + P and search for open keyboard shortcuts (JSON) and paste the following:
// Place your key bindings in this file to override the defaults
[
{
"key": "ctrl+v",
"command": "-workbench.action.terminal.sendSequence",
"when": "terminalFocus && !accessibilityModeEnabled && terminalShellType == 'pwsh'"
},
{
"key": "ctrl+k",
"command": "workbench.action.terminal.clear"
}
]
#WebD'is answer is very helpful and I have upvoted it. But my comment focused on whether there was a conflicting binding for CTRL-V and how to find it. You can literally type "Ctrl+V" (note the "plus+" sign, not a hyphen) and it will find all keybindings that use that binding in whole or part. I suggest that there must be a something else also bound to CTRL-V.
Since this original answer, vscode introduced another way to see what other commands might be bound to given keystrokes. With the Gear/Keyboard Shortcuts file open click on the little keyboardy icon to the right (or Alt+K with this file open) and it will indicate Recording Keys next to it. Now you can literally press Ctrl+V (or whichever keybinding you are interested in) and those corresponding commands, if any, that use that keybinding will be filtered up.
Remember to disable the Recording Keys functionality by clicking the keyboardy icon if you want to go back to regular searching in the Keyboard Shortcuts file.
I have the same problem: can't CTRL+X, CTRL+C, CTRL+V on VSCode editor.
I uninstall the Vim extension and the problem is fixed.
If you install the vim extension for visual studio code and find that ctrl + x, ctrl + v .. or other shortcuts stopped working, this is because they are overwritten by extension.vim_
If you prefer to get those shortcuts back go to keyboard shortcuts (ctrl + shift + p, then search for open keyboard shortcuts file).
Search for extension.vim_ and check too see if any shortcuts are
assigned to your key combination like ctrl + v. Remove it (right click, delete).
Also check for any other conflict by searching the file.
Save the file, it should work now.
For future searchers who do not have Vim (or any other extension) installed which is causing the issue, and who might have verified that their keyboard bindings are correct....
I have the Salesforce Extension Pack installed and had right-clicked on a file and run SFDX: Deploy Source to Org. The deployment had errors, so in the Panel area (which I have at the bottom of my screen) [see image] I had clicked on both the OUTPUT and PROBLEMS tabs, which shifted focus away from my PowerShell TERMINAL tab.
My Ctrl-V issue was when I was trying to correct my Apex code in the EDITOR pane. Ctrl-V was not pasting the code I had just Cut or Copied (but right-clicking and choosing Paste was working).
I ultimately discovered, when I changed my Panel focus back to my PowerShell TERMINAL tab, that ALL of the Ctrl-V pasting I had attempted had shown up after my PowerShell prompt! ["circled" in blue in image]
tl;dr
Make sure your pasted text did not show up in your TERMINAL - even if it is not in focus or even if your cursor is in another Panel tab or in the EDITOR.
From File > Performance > Keyboard Shortcuts > search paste > just try to remove or rest some keybinding with right click on paste or default:paste
If you have the Vim extension installed, you may set the vim.useSystemClipboard in the vim extension setting to true. Then you can paste the content from the clipboard by simply pressing p in the NORMAL mode, or use Ctrl+V in the INSERT mode.
This problem happened to me after I left VSC update itself (currently 1.53.0). It had been converted to Shift-Insert.
Go to File->Preferences->Keyboard shortcuts. Find the editor.action.clipboardPasteAction and double click it, then type Ctrl+V.
+1 for this - in case this helps anyone:
In my case it was only happening in the Thunder Client extension's text fields.
The culprit for me was the Indent on Paste extension (I'm on a Mac, so it was cmd+v instead of ctrl+v - but it fires the same event in VS Code).
I've left issue comments on the Thunder Client and Indent on Paste repos respectively, should anyone wish to add to those.
Look if and remove any VS Code extension :
for example - "Awesome Emacs Keymap" in my case, or any other keymaps installed.
i.e. : FILE/Preferences>/extensions and then look if any special keymap was installed
Modify the setting of vscode:
Settings - input:vim ctrl key - unselect: Enale some vim ctrl key commands that override otherwise common operations, like ctrl + c
go to extensions search Emacs keymap and uninstall it
There should something conflicting to your any previous keyboard shortcut
like in my case for Change All Occurrence: (Ctrl-C + Ctrl-A), vs code, confused with
Ctrl-C for a copy shortcut to this : (Ctrl-C + Ctrl-A), so I change this to (Shift-C + Shift-A), My Issue resolved.
Go to File>Preference>keyboard Shortcuts
Then Check for Copy and paste and enter the Ctrl+C and Ctrl+v shortcuts
Happy Coding ;)
None of the issues above solved this for me. I had a key binding Ctrl+C Ctrl+L. So when I pressed Ctrl+C it was in a state where it was waiting for the next key to be pressed and wouldn't do anything.
This showed up in the toolbar like so (an example):
This didn't come up in the list of keybindings when searching for Ctrl+C. So I found it be looking through the list.
Remove all cmd+v or in windows ctrl+v associated keybindings.
For me the solution was going through my extensions and disabling them one by one to find the culprit.
I had 'Paste and Indent' enabled which was messing up copying and pasting.
Just had to disable it and reload vs code.
Open Settings > keyboard shortcuts
Search for Ctrl + c
Delete the mapping for vim.
i have same problem
step:1
ctrl+shift+p
step:2 find
Open keyboard shortcuts
step:3
find paste
then you can see
editor.action.cliboardPasteAction
right click then changekeybinding if key wrong
or remove key if u found two same line(editor.action.cliboardPasteAction)
in my case is 2nd one(so i removed)
In some cases, if you use remote ssh connects to a remote server and code there, ctrl + V may not be useful because that your remote server has a high balance, you can try to uninstall some useless plugins in that remote server then reload vscode.
I have disabled all extensions, and VS Code hangs for a few seconds whenever I try to paste something. This occurs with Ctrl+V, Shift+Ins and also with right click + Paste.
It hangs, and then nothing happens.
[UPDATE]
I simply reinstalled it, and that solved the issue for me.
In my case just the relaunch of VSCode solved the issue. My key bindings were fine.
"Paste JSON as Code" was my offender, as well as a few other ones. I got a little extension happy there for a bit.
Its easy don't worry, you need to search using ctrl+shift+p and find Prefernces: Open Keyboard Shortcuts(JSON) and add this dict
// Place your key bindings in this file to override the defaults
[
{
"key": "ctrl+c",
"command": "editor.action.clipboardCopyAction",
"when": "textInputFocus"
}
]
I thins it's very helpfull good luck :)
I am facing a problem with my visual studio 2013 ultimate. i would run a open cv project but iam getting a error message like this " opencv_core249d.lib" missing from ur computer. re install the program.
Solution : It works with eclipse Version: Mars.2 Release (4.5.2).
This is a missing .dll issue, not a missing lib issue. It usually occurs when the Environment Variables have not been correctly set in your Windows environment. To take care of this problem, there are 2 methods:
1) edit Environment variables
Go to ‘My Computer’ , right-click and select ‘Properties’. A window called ‘System’ will open, containing the Windows Logo on the right. On the left margin of this window, you will find a link named ‘Advance system
settings’. Click on it.
Another window called ’System Properties’ will open. On the bottom right corner of this window, click on the button named ’Environment Variables..’.
Under the ‘System variables’ column, look for a variable by the name ‘Path’. - Select ‘Path’ and click ‘Edit..’
In the ‘variable value’ row, add the following address:
\path to\opencv\build\x86\vc12\bin;
Please Note- Ensure that the new address added by you, and the address previously written in the ‘variable value’ row, are separated by a ; DO NOT REMOVE the previous environment variable addresses.
2) Manually copy the .dll files.
In case the first approach does not work for you, go to:
\path to\opencv\build\x86\vc12\bin;
You'll find all the dll files that you're looking for. Copy those files to directory where your source code is located.
I'm just wondering if there is some IDE command line parameter which would open a source file on a specified line (in the current view) ?
I know this is probably too much to publish as a command line parameter, but it would be great for my Assert logging system; I would just create a link (label or something) and through this link open the file on the line where the assertion has happened.
The only thing I found is the registry entry (valid for Delphi 2007)
Key:
HKEY_CURRENT_USER\Software\Borland\BDS\5.0\Closed Files\
Value:
TSourceModule,'<FilePath>',0,<PositionX>,<PositionY>,<CursorX>,<CursorY>,0,0,,
Where:
<FilePath> - the full file path
<PositionX> - first visible char in horizontal scope
<PositionY> - first visible char in vertical scope
<CursorX> - cursor position in horizontal scope
<CursorY> - cursor position in vertical scope
The rest of this key value I don't know but it might be enough to create this key and open the file.
Thanks
Following discussion in the comments to the question, it appears that you would be satisfied with writing a small utility to generate a fake .dsk file (desktop file) and possibly a matching fake .dproj file (project file). The .dsk file would contain just enough information to trick the IDE into opening the required file and moving to the desired location within that file.