I seem to be having trouble aligning elements. I want this UITextField to always be center horizontally, and stay towards the top of the app.
This is what it looks like on the storyboard:
As you can see, there are constraints set - which are blue lines (I think that means they are correct)
However when I view it in the simulator:
These are the settings in the Xcode pin popup:
Question:
How do I get the UITextField to always stay center horizontally, regardless of device or orientation?
Edit 1:
I took out all constraints, I made the UILabel the full width of the view, and centered the text inside. I assumed that this would make it center, but alas not.
Storyboard:
Simulator:
Edit 2:
See the two red squares, I'm not sure how to change that text. There are no options on edit.
I also cant see how to add the other constraints that you suggested.
remove your left and right constraints and set the following one.
Related
I am trying to create an Android-esque Snackbar. All the behaviour is correct but I am left with a layout issue. I have actually broken this out into a test app to simplify things a bit.
The bar is pinned to the bottom of the view and contains an Icon (UIImageView) along with some text (UILabel). This text can be up to 2 lines max.
For example, it should be able to exand out like this:-
However to further complicate things, i need it so that the icon and text are centred within the red bar and then spread out from the centre until such point that it needs to wrap. Note that there is a padding to the start of the icon and end of the text to prevent it touching the sides. An example of centred content would be..
I haven't been able to get the correct layout. I think the issue has been trying to centre the two items whilst simultaneously conforming to a width that doesn't exceed the edge bounds, causing a constraint conflict. I have also tried embedding the icon and label in a horizontal stack view but couldn't seem to find the correct fill option whilst centring everything.
I have even tried using NSAttributed string and adding the image to the text itself but when the text wrapped, the icon was being resized and/or misplaced.
As you can see, i have been doing this in Storyboard but i am more than happy to do this programmatically if it serves this purpose better.
Created this Demo for reference , it's a simple task of making a nested view inside the red view with a centerX constraint of priority 1000 and a leading constraint with 999 priority
Now you have this effect
I am new to iOS and am trying to align these TextFields in iOS. Below is how I would like it to look on an iPhone 7.
However, on the iPhone 7 Plus, the TextField shifts to the left of the center, despite my constraints.
Why is this? I have a constraint that aligns them to the Center, as seen on the right part of the screenshot.
It is very simple!! Just follow below steps,
Open you .xib or .storyboard file
Select view you have to add constraint
Click on align button at the right - bottom corner
Set horizontally in container constraint 0
Then press add constraints button
You can add any constraints to any view by following these steps
You just have to seth trailing and leading space fixed means both left
and right indicators should be red as shown in the screenshot.
For more details see the screenshots:
It will remain fixed from left and right in all the screens.
in your case is important set the width constraint.
However you can use trailing and leading constraints, in this way you will not need to set a defined width for your textfield and the position is correct for all type of devices.
If you want design like this so you have to take UITableview then take UITextfield for every cell beacuse you use every cell as view so easily manage all textfield and constraint. And also easily scrolling if device is display small.
I'm creating an app with quite a lot of text. It will be of variable size, so I was wondering if there is a way to adapt my ScrollView to the size of the UILabel, not knowing in the IB what will be the number of lines of that label. I'm doing it from the IB, drag n dropping it, then I'm putting 4 elements inside : an image for the logo, a title, another image, and then the label.
My question is : how can I tell my ScrollView to adapt to the text ? With constraints ? In the code ? I'm sooooo lost with that scrolling thing…
I think I need a very very good tutorial about autolayout…
Here's some screenshots of my project
The project on simulator
The layout
Thanks a lot!
You have to add the constraints to your label so that it will always have the same spacing to the scroll view. Also, you will have to set your labels lines to 0.
Don't press Add Missing Constraints because it will probably set your height and you don't want that to happen. Use the Pin button to set the spacing to nearest neighbor.
These are the buttons you will have to use, they are bottom right.
First of all, press the one in the right and select All Views > Clear Constraints.
Then, select your label in the storyboard and press the button with a square Pin, here you will have to select everything until you have something like this with different values... Also click in the red lines so that you get a continuous red line. Don't check any of the boxes you see.
After this, you have to do the same process for your Scroller.
It should be enough. I will also need to know where your scroller is.
If you have anything else in your view, do the same.
I just like two buttons above each other with no margins. This seems like an easy task, but I am new to iOS and I wasted too much time now. I tried dozens of contraints but it never went out well. I always ended up with setting the leading Spaces to -24 and having marings above and beneath the buttons. I am using xcode6, iOS8.1 and storyboard. My app is landscape only. Can someone please teach me what to do?
The buttons should look like seen in this picture: Fullscreen, no margins and Button1 should reach unter the statusbar!
I'll outline the steps:
Pin Button 1 to 0 spacing on Left, Right, Top
Pin Button 2 to 0 spacing on Left, Right, Bottom
Select both buttons, then Pin heights equally
(You can access pin either from the Editor tool bar in the top menu, or from the second icon in the constraints area)
The thing with constraints and auto layout is that you only need enough constraints to let the app calculate where elements should be at all times. You might be able to get away with less constraints.
To get remove the borders, you need to change the button Type in IB from System to Custom, then you can drag and alter the margins to remove them. Following that you will need to update constraints on the buttons.
I'm using Interface Builder in Xcode 6 to make an app and am having trouble getting the text fields and button to centre on the screen for different size screens.
I thought it was a matter of selecting horizontal and vertical centering in container but it doesn't seem to be that when I try it in auto layout. Actually I've tinkered around a bit and I still haven't got it.
I just want to be able to see all of my button and text fields for any size iPhone screen and right now simulator is only showing part of these UI elements like this:
I also want to do this in storyboard and not in code as I'm not at the level of doing this in code yet.
Step 1: Make sure your size class covers all the iPhone screen at least in portrait view. So, change the size class to "wCompact hRegular".
Step 2: After setting the size class properly, add the UITextFields and UIButton to your storyboard. To me, it looks something like-
Step 3:
Before, you start adding constraints, you need to remember two things-
a. Your element(UITextField, UIButton, UIView or any component) needs to know its starting position unambiguously, and
b. Your element needs to know its size meaning, its height and width.
In this case, as you want to centre your elements, I am just assuming that it needs to be centred starting from 10 scale from the left edge and should end 10 scales away from the right edge of your iPhone screen. Now, that means, it's width will be different based on the screen size, but its height will be same.
So, I just add the constrains following way for the 1st text box-
Notice, in the size inspector, I set the text box's starting point, x and width in a way that it is 10 pt away from left edge and 10 pt away from the right edge. Don't worry, it's just simple math.
For the 2nd textField, I add the constrain, the same way-
Lastly, for the button, the constrains are following-
Now, you are good to go. Everything is centered.
By using your size class selector in the bottom of the storyboard window, set you sizes as any width and any height and then follow the below auto layout constrains. It will work for you.
First select the view you want to set the auto layout, and then select the pin option from the right bottom corner of your storyboard and then add the constrains as shown in above picture and click button Add 4 constrains
Repeat the process for all views and set the constrains as Fix the top, bottom, left and right constrains of all views except the last button that should be fix from top,left,right and fixed height.
You need to make use of the size class selector in the bottom of the storyboard window.
So for an iPhone 6 or 6 Plus in portrait you would choose a compact width and regular height like this:
And then you would do whatever auto layout stuff for the given device there