I'm a newbie when it comes to UIConstraints and i'm trying to center the "Continue Button" and "No, thanks" with Auto Layout in the space between the UICollectionView and the bottom in the xib. Which UIConstraints should i add?
Here is the implementation i made
As you can see in the image, i implemented 3 Stack Views with the different components. To make them all "one" i put them in a Stack with constraints <= to the bottom and top and constraints with a fixed size so that they don't go pass the bounds of the view.
If you don't want to use absolute values, you need two more transparent views to obtain the layout you want.
One view, should be added above "Continue" and it should have it's top margin set to the collectionView and the bottom margin set to "Continue".
The second view should be placed under "No thanks" and it should have the top margin set to "No thanks" and the bottom margin set to the bottom of the superView.
You can have both views take up all the horizontal space by adding left and right margins equal to the superView.
After you set the constraints I mentioned above, you have to add one more equal height constraint between the two extra views. This will ensure that the space above "Continue" and under "No thanks" will always be equal.
Related
I am a little stuck with the ScrollView in Swift and Xcode 11.
My goal is a simple ScrollView with Labels and Textfields. Each label describes what the textfields are used for. For example there is a Label "Name", so you have to enter your name in the textfield under the label. For this I need a ScrollView because the App I am coding requires a few more information. When I am trying to put this in a ScrollView I am constantly getting the following error:
"Scrollable content size is ambiguous to ScrollView".
In order to find help I searched the internet and for example found this question: UIScrollView Scrollable Content Size Ambiguity.
Unfortunatly it didn't solve my problem. So I decided to create a small test project with the following:
- I created a project as a Single View Application
- I added a ScrollView to the ViewController
- I clicked on the constrains-Button at the canvas
- I selected 0,0,0,0 for leading/top/trailing/bottom.
- I clicked on "add 4 Constrains
- Now the warning appeared. Also the ScrollView was not resized to the ViewController... I don't know why.
- I added a UIView inside the ScrollView and set the same constrains, this time according to the ScrollView.
- The UIView (Content view) got an extra constrain: Equal width with the root view
- Now I added two Buttons, one with the text "Hello" and the other one with "world" on it.
- The "hello"-Button received the following constrains: 16 to leading, trailing and top, as well as a fixed height of 30.
- The "world"-Button got the following constrains: 16 to bottom, leading, trailing and over a 1000 so you can scroll through the ScrollView.
After all these steps the error is still there and if I run the app the "hello"-Button is at the top of the screen and the "world"-Button is at the bottom and I can't scroll.
Can maybe anyone help me fixing this issue. I am looking forward to every answer! Thank you for your help in advance!
Here is the trick that worked for me:
Add a ScrollView to your wished ViewController.
Select it in the Outline and open its size inspector.
Uncheck there the option "Content Layout Guides".
Now set leading/top/trailing and bottom constrains to 0 of the ScrollView.
Add in a UIView and constrain its leading/top/trailing and bottom also to 0.
Add an equal width constrain to the UIView. (The width needs to be equal the width of the view from the ViewController, with this way you are disabeling horizontal scrolling).
The warning will disappear if every element inside the UIView is chained vertically. This means, that the top element has a constrain to the top of the view and to the element under it and so on. The last element needs a constrain to the bottom of the view.
If you followed this steps you should be fine with ScrollViews. This way you also can add as many content as you want to the bottom and the ScrollView will extend dynamically.
I hope I explained it well enough.
It sounds like you're on the right track, and really close.
The first part is absolutely right - you add your ScrollView and pin it to zero for the top, trailing, bottom, and leading constraints. That makes it take up your whole screen.
Then you drop a plain old UIView into the ScrollView, and pin its top, trailing, bottom, and leading constraints to the ScrollView (all as zero again). Then you set the UIView to have an equal width to the ScrollView. The last thing is to set the UIView's height as equal to the ScrollView's height, but you change one thing: you set the priority of this constraint to be low (250). That's basically what allows the UIView to exceed the size of the ScrollView, so you can then scroll.
All you do then is add your buttons, etc inside the UIView, so you place them in relation to it rather than the ScrollView, and pin or align them as you wish.
Add a total of 9 constraints
1 - 4: ScrollView to Superview (leading, top, trailing & bottom)
5 - 8: Content view to Content Layout guide (leading, top, trailing & bottom)
9: Content view Width equals width to Frame Layout Guide.
But when you do this (right-click drag and drop) 7 & 8 constrains (trailing & bottom constrains to Content Layout guide) will have constant values. (check image below).
Just make them zero. Now it worked.
I have a view with two button. I have added auto-layout. But bottom space is more in iPhone 8 plus than iPhone 4s.I want to keep the spacing ratio of top and bottom same in all iPhone. How to fix it ?
Updated
For Specific Ratio : To my understood, We can give Multiplier for Centre Vertically Constraints. Here ratio of top and bottom space will be same in all iPhone series. I gave Multiplier as 1.4
==================================
I know having several answers there. But, no one used UIStackView to add two simple buttons.
Drag two UIButton, select that two UIButtons, click Embed in Stack icon from here.
Stackview Properties
Give following things for UIStackView,
Set Axis as Horizontal, Distribution as Fill Equally, Spacing as 10 in Attributes Inspector
Stackview Constraints 1
Give constraints for that UIStackView, Check/Uncheck Margins, Left and Right = 0, Height as 30.
Stackview Constraints 2
Still, some constraints are not satisfied. Press Control and hold it, Click StackView and Drag to SuperView, you will get black pop up. Choose Center Vertically in container.
Stackview Constraints Customization
If you want to change height of UIButton or Bottom Space, click UIStackView and in Size Inspector, you can change height or move up/down.
If you are using Auto layout then set constraint like this way
set constraints to bottom and leave top constraints
1) Select both buttons
2) Click on "Resolve auto-layout issues" button on bottom and click on "Reset to selected Constraints"
You should have 2 stack views. One Horizontal that contains the 2 buttons, and another vertical that contains the previous stack view. Set the horizontal stack view to "fill" and "equal spacing" and the vertical stack view to "fill" and "equal centering." Below I've included a couple of pictures to illustrate what I mean.
THE ONLY CONSTRAINTS ARE ON THE STACK VIEWS THAT BIND THEM TO THE SIZE OF THE CONTAINER VIEW, OR PARENT STACK VIEW.
This allows you to truly create an auto layout that scales with the device's screen size.
Use Constraints like this. These buttons have bottom fix with superview.
So I'm just trying to wrap my head around Auto Layout; I understand how to use constraints, just not how to apply them appropriately. In the picture below I had set no constraints and simply want this simple design to resize correctly on all size classes (Horizontally and Vertically).
http://tinypic.com/r/2ymxbop/9
What constraints would I need to put in to have these squares resize appropriately on all screens (horizontal/vertical) and can you do this in the ( W:Any H:Any ) size class or do you have to set constraints for each individual size class?
Thanks!
One size class is all you need in this case.
Set a constraint for each of the 4 gaps between the rects (i.e. the space between the top 2, between the top-left and bottom-left, ...).
Set a constraint for each rect to its 2 closest outer edges.
Now you've set four constraints for each rect - and that's all you need!
For that case: follow the steps
1.Add four uiview to screen, two top and two bottom.
2.In your case the view not touching to bottom layout guide,so you have to give fixed height.
Start the add constraints to views.
All views are correct width and height.
3.So take first view from left top,give leading space ,top space and adjecent spacing to right top view. And select the pin button from the canvas below right side option availabe, select height ,give how much height you need.
4.Now select right top view ,give constraint to top layout guide and trailing space.and also same height what you selected before for view one.
5.Now view three ,left bottom view , give leading ,spacing to top view and right spacing to fourth view and select same height .
6.Now fourth view, give spacing to top view ,trailing to container and select height.
Almost completed.
7.Select all views at once ,give equal withs(option available in pin).
lastly some warning will shows ,do update frames.
I am struggling to align 5 items in a row using auto layout as shown in the storyboard.
I can align the 3 items highlighted below but the 2 inbetween just don't want to align.
I have tried pinning the items to the buttons next to each of the items and setting the size but they refuse to align properly. Have also tried setting the 2 misplaced buttons to the leading and trialing container as shown below but these still do not align properly (or even closely).
Am I doing something wrong?
The way to do this is with spacer views. You need to add a UIView between each of your views and give them each horizontal spacing constraints to the view on either side. You'll need to edit these constraints so they are between the spacer's leading or trailing edge, and the view's centerX (the constant value should be 0). Give the spacers equal widths (but no fixed width), a fixed height, and a clear background color. You views on the left and right sides should have constraints to their closest edge, but the center view shouldn't have a centerX constraint (it's not needed). This will cause the views to be equally spaced in all screen sizes, and in both orientations.
Your best bet might be to create another superview (UIView) within which your button items are located. Then you can align your buttons more fluidly within that superview that encapsulates only those buttons rather than just wrestling with the constraints within the card superview, which it seems you are doing. Just make the background of that UIView clear, place the buttons on it, and it will appear exactly the same and you'll have a better way to anchor your views. This could also come in handy when you're targeting the functionality of just those buttons so you can grab them from the subviews of the button bar superview.
I'm attempting to have two buttons side by side that look correct across all devices but no matter what constraints I seem to add in I keep getting issues similar to this (one button larger then the other):
Any ideas what I'm doing wrong as far as adding in constraints? I'm not using code for this simply doing it through the InterfaceBuilder in Storyboard.
Constraints set:
Reply: Leading Space, Bottom Space, Height Equals :45, Trailing to Delete Button
Delete: Trailing Space, Bottom Space, 32:9 Ratio, Height Equals :45, Leading to Reply Btn
With both buttons selected, go to Editor > Pin > Widths Equally. Then set the height, leading/trailing space, space between the buttons, and bottom space.
According to me add following constraints
Select Reply button adds leading space and bottom space to superview
Add center Y constraints to delete button
Then align top and bottom space to delete button and also add trailing space to delete button
After this select delete button add bottom space and trailing space.
I had similar operations on one of my view, please see this picture for more info
Happy Codding :)
You need to add a constraint for equal widths, and also remove the '32:9 ratio' constraint, which is currently setting a width for the "Delete" button w/o having a set width for the "Reply" button. That's what's causing the issue.
If you then still have the leading & trailing edges pinned to their respective sides of the container view, and set the space between them to zero, then you should be good.