I am trying to keep the selected state of multiple cells on a didSelectRowAtIndexPath method. I have an edit button that I've set up that loops through every cell to select each field on my UITableView.
Here is the code for the edit button on tap that selects all my rows.
- (IBAction)editButtonTapped:(id)sender {
for (int i = 0; i < self.caseDataTableView.numberOfSections; i++) {
for (NSInteger r = 0; r < [self.caseDataTableView numberOfRowsInSection:i]; r++) {
[self tableView:caseDataTableView didSelectRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:i]];
}
}
}
When calling the didSelectRowAtIndexPath method, it does the following code.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
OKOperatieNoteTableViewCell *cell = (OKOperatieNoteTableViewCell *)[self.caseDataTableView cellForRowAtIndexPath:indexPath];
cell.cellIndexPath = indexPath;
[cell hideLabelAndShowButtons];}
Incase you were wondering here is the hideLabelAndShowButtons method.
- (void)hideLabelAndShowButtons {
self.caseDataKeyLabel.hidden = NO;
if (!self.disabled) {
self.caseDataValueLabel.hidden = YES;
self.textField.hidden = NO;
if ([self.inputType isEqualToString:#"switcher"] || [self.inputType isEqualToString:#"multiselect"] || [self.inputType isEqualToString:#"picker"] || [self.inputType isEqualToString:#"DatePicker"] || [self.inputType isEqualToString:#"selectContact"]) {
self.button.hidden = NO;
}else {
self.button.hidden = YES;
}
}
self.caseDataDescriptionTextView.hidden = YES;}
Now at this point, I have all my rows selected. If I scroll down and then back up the selection of these rows is not there anymore. Now I'm aware when you go in and out of the view, the cellForRowAtIndexPath method recreates these cells. The following is my cellForRowAtIndexPath method.
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *cellIdentifier = #"caseData";
OKOperatieNoteTableViewCell * cell = [[OKOperatieNoteTableViewCell alloc]init];
cell = [tableView dequeueReusableCellWithIdentifier:cellIdentifier forIndexPath:indexPath];
if (indexPath.row < _procedureVariables.count) {
if ([[[_caseDataArray objectAtIndex:indexPath.row] valueForKey:#"key"] isEqualToString:#"Procedure"]) {
[cell setLabelsWithKey:[[_caseDataArray objectAtIndex:indexPath.row] valueForKey:#"key"] AndValue:[self.model valueForKey:#"var_procedureName"]];
}else {
[cell setLabelsWithKey:[[_caseDataArray objectAtIndex:indexPath.row] valueForKey:#"key"] AndValue:[[_caseDataArray objectAtIndex:indexPath.row] valueForKey:#"value"]];
}
OKProcedureTemplateVariablesModel *variableModel = _procedureVariables[indexPath.row];
cell.variable = variableModel.value;
[cell showLabelAndHideButtons];
cell.delegate = self;
[cell setUpCellType];
} else if (indexPath.row == _procedureVariables.count) {
NSString *text = [NSString stringWithFormat:#"%# \n\n %#", [_templateDictionary objectForKey:#"indicationText"], [_templateDictionary objectForKey:#"procedureText"] ];
[cell showDescription:text];
NSLog(#"cell.caseDataDescriptionTextView.font.fontName = %#", cell.caseDataDescriptionTextView.font.fontName);
}
cell.procedureID = _procedureID;
[tableView setContentInset:UIEdgeInsetsMake(1.0, 0.0, 0.0, 0.0)];
return cell;
}
I'm just trying to figure out how to keep the selected state of these cells once the cellForRowAtIndexPath method is called. Any suggestions are welcomed.
i tried to simulate your situation, created a customCell and saved the indexpaths of selectedRows in my custom selectedPaths mutable array(initialized in viewDidLoad).
After every click i removed or added related indexpath to my array.
it worked for my case. Hope it helps.
-(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *cellIdentifier = #"caseData";
NOTableViewCell *cell = (NOTableViewCell *)[tableView dequeueReusableCellWithIdentifier:cellIdentifier];
if (cell == nil)
{
NSLog(#"new cell created for row %d", (int)indexPath.row);
cell = [[[NSBundle mainBundle] loadNibNamed:#"NOTableViewCell" owner:self options:nil] objectAtIndex:0];
}
if ([selectedPaths indexOfObject:indexPath] != NSNotFound) // this cell is in selected state.
{
[cell.textLabel setText:#"This cell selected"];//selected state job.
return cell;
}
[cell.textLabel setText:[NSString stringWithFormat:#"%d", (int)indexPath.row]];
return cell;
}
-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
if ([selectedPaths indexOfObject:indexPath] != NSNotFound) {
[selectedPaths removeObject:indexPath];
}
else{
[selectedPaths addObject:indexPath];
}
//[tableView reloadData];
[tableView reloadRowsAtIndexPaths:#[indexPath] withRowAnimation:UITableViewRowAnimationNone];//instead of reloading all just reload clicked cell.
}
You need to update the cell to selected and not selected explicitly in both directions in cellForRowAtIndexPath.
If not, the recycled cells will just show the value of the cell the cell was last used for until you change it.
While you are invoking the delegate method in order to call hideLabelAndShowButtons, you aren't telling the table view that you have selected the row;
- (IBAction)editButtonTapped:(id)sender {
for (int i = 0; i < self.caseDataTableView.numberOfSections; i++) {
for (NSInteger r = 0; r < [self.caseDataTableView numberOfRowsInSection:i]; r++) {
NSIndexPath *path=[NSIndexPath indexPathForRow:r inSection:i];
[caseDataTableView selectRowAtIndexPath:path animated:NO scrollPosition:UITableViewScrollPositionNone];
[self tableView:caseDataTableView didSelectRowAtIndexPath:path];
}
}
}
Also, you aren't using the cell selection state in cellForRowAtIndexPath, so you probably need to change some code there too, but I am not sure what the relationship is between selected state and how you want to render the cell.
Related
My Custom tableview cell content getting empty after scrolling.So pls help me with this.
My custom cell has 8 buttons and a label.First I'm showing only label that has title and on selection I'm expanding the cell and showing all buttons.So, when I select few buttons and I do scrolling,buttons that I selected getting refreshed or get back to normal state.Here is the code.Pls help me with this
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *simpleTableIdentifier = #"newFilterCell";
newFilterCell *cell = (newFilterCell *)[tableView dequeueReusableCellWithIdentifier:simpleTableIdentifier];
if (cell == nil)
{
NSArray *nib = [[NSBundle mainBundle] loadNibNamed:#"newFilterCell" owner:self options:nil];
cell = [nib objectAtIndex:0];
[cell.contentView.superview setClipsToBounds:YES];
}
cell.QuestionLabel.text=[orderArray objectAtIndex:indexPath.row];
NSArray * arr = [filterInfo objectForKey:[orderArray objectAtIndex:indexPath.row]];
int val = 0;
NSLog(#"%#",cell.subviews);
NSArray * cellViews = cell.contentView.subviews;
if (arr.count>0)
{
for (int i=1; i<=8; i++) {
if (i<=arr.count) {
UIButton * target = (UIButton*)[cell viewWithTag:i];;
[target setTitle:[arr objectAtIndex:i-1]forState:UIControlStateNormal];
[target addTarget:self action:#selector(selectButton:) forControlEvents:UIControlEventTouchUpInside];
}
else
{
[[cell viewWithTag:i] setHidden:YES];
}
}
}
[cell setSelectionStyle:UITableViewCellSelectionStyleNone];
return cell;
}
On selection of my cell I'm expanding and reloading the tableview cells.
-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
if (indexPath==_expandIndexPath) {
_expandIndexPath = nil;
NSMutableArray *modifiedRows = [NSMutableArray array];
[tableView reloadRowsAtIndexPaths:modifiedRows withRowAnimation:UITableViewRowAnimationLeft];
}
else
{
selectedRow=indexPath.row;
NSMutableArray *modifiedRows = [NSMutableArray array];
[tableView deselectRowAtIndexPath:indexPath animated:TRUE];
_expandIndexPath = indexPath;
[modifiedRows addObject:indexPath];
[tableView reloadRowsAtIndexPaths:modifiedRows withRowAnimation:UITableViewRowAnimationLeft];
}
}
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{
NSArray * arr = [filterInfo objectForKey:[orderArray objectAtIndex:indexPath.row]];
if ([indexPath isEqual:_expandIndexPath])
{
if ([[orderArray objectAtIndex:indexPath.row]isEqualToString:#"Height"]||[[orderArray objectAtIndex:indexPath.row]isEqualToString:#"Age"])
{
return 275;
}
else
{
if(arr.count==3)
return 55*arr.count;
else
return 37*arr.count;
}
}
else
return 70;
}
UITableViewCells are getting recycled. That's why its not safe to do it your way. Your data model needs to remember your buttons and other stuff that changed. You need to apply the changes every time the cell gets created.
You need to check in the cellForRowAtIndexPath what button is pressed and then show the view correctly.
You need to remember what happend in the cells with an external data source to apply the changes you want.
In your cellForRowAtIndexPath should be something like a check for a boolean whether or not you show some stuff:
if(button_is_pressed_for_row_5 == true){
button_in_cell.hidden = true;
}else{
button_in_cell.hidden = true;
}
Trying to implement the checkmark for UITableView.
Checkmark for UITableView Cell is not selecting to all row, when scroll tableview
its not not enable.
Below is my code which i Implemented.
IndexButton is UIButton Class which added index init.
-(void)selectAllAction:(IndexedButton *)sender{
for (int rowIndex = 0; rowIndex < [array_MedicineList count]; rowIndex++) {
NSIndexPath *indexPath = [NSIndexPath indexPathForRow:rowIndex inSection:0];
UITableViewCell *cell = [tbl_ProductList cellForRowAtIndexPath:indexPath];
IndexedButton *btn_SelectItem = (IndexedButton *)[cell viewWithTag:TAG_SELECTEDITEM];
[btn_SelectItem setBackgroundImage:[UIImage imageNamed:#"checkMark"] forState:UIControlStateNormal];
}
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *productListTableViewCell = #"ProductListTableViewCell";
ProductListTableViewCell *cell = (ProductListTableViewCell *)[tableView dequeueReusableCellWithIdentifier:productListTableViewCell];
if (cell == nil){
cell = [[ProductListTableViewCell alloc] initWithStyle:UITableViewCellStyleDefault
reuseIdentifier:productListTableViewCell];
cell.selectionStyle = UITableViewCellSelectionStyleNone;
IndexedButton *btn_SelectItem = [IndexedButton buttonWithType:UIButtonTypeCustom];
btn_SelectItem.frame = CGRectMake(10,52,32,32);
[btn_SelectItem setBackgroundImage:[UIImage imageNamed:#"uncheckMark"] forState:UIControlStateNormal];
[btn_SelectItem addTarget:self action:#selector(selectItemAction:)forControlEvents:UIControlEventTouchUpInside];
btn_SelectItem.index = (int)indexPath.row;
btn_SelectItem.tag = TAG_SELECTEDITEM;
[cell addSubview:btn_SelectItem];
}
IndexedButton *btn_SelectItem = (IndexedButton *)[cell viewWithTag:TAG_SELECTEDITEM];
btn_SelectItem.index = (int)indexPath.row;
cell.backgroundColor = [UIColor clearColor];
return cell;
}
#All
Need suggestion, how to go forward to implement the check mark for tableview.
I would suggest you to use cell with accessory view with UITableViewCellAccessoryCheckmark type to show all cells selected/ few cells selected/ none of the cells selected.
Also, you must keep the state for each cell index within a section, whether it's selected or not as
// keeps info for selected rows in a section in mutable index set as
NSMutableIndexSet *selctedCellsInSection;
// initialize the above set instance
selctedCellsInSection = [[NSMutableIndexSet alloc] init];
//Inside cell for row at index path
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil)
{
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier];
}
if ([selctedCellsInSection containsIndex:indexPath.row])
[cell setAccessoryType:UITableViewCellAccessoryCheckmark];
else
[cell setAccessoryType:UITableViewCellAccessoryNone];
// customize cell as per your requirements
return cell;
}
You need to hold the information about a cell's checkmark whether it needs to be shown or not in selctedCellsInSection set as -
Use [selctedCellsInSection addIndex:rowToSelect]
// to add cell index on which checkmark needs to be shown
Use [selctedCellsInSection removeIndex:rowToUnselect]
// to add cell index on which checkmark should not be shown
After, customizing the data source selctedCellsInSection(which keeps information about selected/ unselected cell) reload the tableview.
Reloading the table will reflect the selected cells with Cell's Accessory Checkmark.
In your case as you need show check mark on all cell, you can do so as-
-(void)showCheckMarkOnAllCells
{
for (int rowIndex = 0; rowIndex < [array_MedicineList count]; rowIndex++)
{
[selctedCellsInSection addIndex: rowIndex];
}
[tableView reloadData];
}
#interface BRNCategoryViewController ()
{
NSMutableArray *arySelectCategory;
NSMutableArray *aryCategory;
}
- (void) viewDidLoad
{
arySelectCategory=[NSMutableArray new];
}
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
return aryCategory.count;
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
BRNCategoryCell *cell=[[BRNCategoryCell alloc]initWithOwner:self];
if ([arySelectCategory containsObject:[aryCategory objectAtIndex:indexPath.row]])
{
cell.imgBoxView.image=[UIImage imageNamed:#"checkMark"];
}
else
{
cell.imgBoxView.image=[UIImage imageNamed:#"uncheckMark"];
}
cell.lblTitle.textColor=Rgb2UIColor(127, 127, 127);
cell.lblTitle.font=[ASCustomClass FontWithSize:20.0];
cell.lblTitle.text=aryCategory[indexPath.row];
cell.backgroundColor=[UIColor clearColor];
return cell;
}
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
[tableView deselectRowAtIndexPath:indexPath animated:YES];
if ([arySelectCategory containsObject:[aryCategory objectAtIndex:indexPath.row]])
{
[arySelectCategory removeObject:[aryCategory objectAtIndex:indexPath.row]];
}
else
{
[arySelectCategory addObject:[aryCategory objectAtIndex:indexPath.row]];
}
[tblEventCategory reloadData];
}
I'm trying to make custom selection of UITableView cells. To do this I created UIView above my cell and it appear/disappear on touching now. But the problem is that when I press on cell selection appears. If then I select any other row it will be selected too! But it must not. Every previous cell must be deselected but I do only single selection for my UITableView. I'll glad for any help.
Here is my code :
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath: (NSIndexPath *)indexPath
{
static NSString *CellIdentifier = #"userDataCell";
AVMThemeCell *cell = [self.userContentTable dequeueReusableCellWithIdentifier:CellIdentifier];
// Configure the cell...
if (cell == nil) {
cell = [[AVMThemeCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
AVMDataStore *oneItem = [userContentArray objectAtIndex:indexPath.row];
oneItem = [userContentArray objectAtIndex:indexPath.row];
[cell setGenre:oneItem];
cell.imgView.image = [UIImage imageNamed:imgThemesArray[indexPath.row]];
//save cell state!
NSNumber *rowNsNum = [NSNumber numberWithUnsignedInt:(unsigned int)indexPath.row];
if ([selectedCellsArray containsObject:[NSString stringWithFormat:#"%#",rowNsNum]] )
{
NSLog(#"selectedCellsArray %#",selectedCellsArray);
cell.selectedBG.hidden=NO;
[cell setSelected:NO animated:YES];
}
else
{
cell.selectedBG.hidden=YES;
}
return cell;
}
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath{
#try{
// TODO: Select Item
if (shareEnabled) {
[selectedCellsArray removeAllObjects];
AVMThemeCell *collectionCell = (AVMThemeCell*)[tableView cellForRowAtIndexPath:indexPath];
NSNumber *rowNsNum = [NSNumber numberWithUnsignedInt:(unsigned int)indexPath.row];
if ( ![selectedCellsArray containsObject:[NSString stringWithFormat:#"%#",rowNsNum]] )
{
[selectedCellsArray addObject:[NSString stringWithFormat:#"%ld",(long)indexPath.row]];
collectionCell.selectedBG.hidden = NO;
[collectionCell setSelected:NO animated:YES];
// NSLog(#"view is %#",collectionCell.selectedBG);
NSLog(#"selected view is hidden = %hhd",collectionCell.hidden);
NSLog(#"selected in didselect %d",(int)indexPath.row);
}
else {
[selectedCellsArray removeObject:[NSString stringWithFormat:#"%ld",(long)indexPath.row]];
collectionCell.selectedBG.hidden = YES;
NSLog(#"DEselected in didDEselect");
}
}
} #catch (NSException *e){
NSLog(#"Exception! %#",e);
}
}
A more simple approach to do this is to use NSIndexPath.
Create NSIndexPath variable to track last selected cell.
#property (nonatomic, strong) NSIndexPath *selectedIndexPath;
Initialisation variable in viewDidLoad() method:
self.selectedIndexPath = [NSIndexPath indexPathForRow:-1 inSection:-1];
Observe value -1 for row and -1 for section in above line which will intialize indexPath with no row selection in tableView.
Now, UITableView datasource methods will be like below:
In cellForRowAtIndexPath method put a condition to check current indexPath is selected or not?
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
// . . .
// Change background color of selected cell
if (self.selectedIndexPath == indexPath) {
[cell setBackgroundColor:[UIColor orangeColor]];
} else {
[cell setBackgroundColor:[UIColor clearColor]];
}
// . . .
}
Update selected index path in didSelectRowAtIndexPath method:
- (void) tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
// . . .
AVMThemeCell *previousCell = (AVMThemeCell *)[tableView cellForRowAtIndexPath:self.selectedIndexPath];
previousCell.backgroundColor = [UIColor clearColor];
self.selectedIndexPath = indexPath;
AVMThemeCell *selectedCell = AVMThemeCell *[tableView cellForRowAtIndexPath:self.selectedIndexPath];
selectedCell.backgroundColor = [UIColor orangeColor];
// . . .
}
I've been trying to figuered this out for hours. I'm just plain old stuck here. What im trying to accomplish is basically inserting a row directly below the row just tapped in the tableview in addition i would like to add and image to the row and and make the image clickable to respond to its click event.
So here is my code.
I implemented (i belive) the nessesary methods to handle all the actions for the uitableview.
when the user taps the cell i handle that action by executing the following code.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
if (debug==1) {
NSLog(#"running line 225%# '%#'", self.class, NSStringFromSelector(_cmd));
}
Locations *location = nil;
Locations *tempObject = [[Locations alloc]init];
//test to see if we are looking for the search box or if we are essentially looking from the main view controller.
if (self.searchDisplayController.active) {
location= [self.searchResults objectAtIndex:indexPath.row];
NSLog(#"location : %#" ,location.locationName);
} else {
location = [self.locations objectAtIndex:indexPath.row];
NSLog(#"location : %#" ,location.locationName);
//set the new indexpath to 1 more then before so that we can essetially add a row right below the actual tapped item.
NSIndexPath *newPath = [NSIndexPath indexPathForRow:indexPath.row + 1 inSection:indexPath.section];
indexPath = newPath;
[self.locations insertObject:tempObject atIndex:indexPath.row ];
[tableView insertRowsAtIndexPaths:#[indexPath] withRowAnimation:UITableViewRowAnimationBottom];
self.visibleCell =YES; //set this boolean variable so that we can add a specific row image to this var
// self.locations[0].isItVisible = YES;
}//ends the else statement.
[tableView deselectRowAtIndexPath:indexPath animated:YES];
}
the above code inserts an empty cell into my tableview.
however how can i set the cell so that its custom and not the same as the others. In other words my initial cells data-source are basically bound to an nsobject and a string property location-name. However when i go try to update the table cells in the above method i obviously cannot add an image into a string so I'm running in to a error.
so i tried to instead make the update on the
(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
by basically checking if a variable is set to true or false but that turned out to be buggy because even when i scroll this method gets called.
How should i go about doing this. I think i have to do it all in the didselectrowindexaspath method. But i cant figured out how to change the newly inserted cell to contain an image only.
Any help would be appreciated.
EDIT
here is what im doing to try to add the image under the cellforrowindexpath method.
if(self.visibleCell==YES){
UIImage *clkImg = [UIImage imageNamed:#"alarm_clock.png"];
cell.imageView.image = clkImg;
}
Im a noob so im not sure im doing this correctly.
EDIT
this is the full cellforatindexpath
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
if (debug==1) {
NSLog(#"running line 159 %# '%#'", self.class, NSStringFromSelector(_cmd));
}
// NSLog(#"cell for row at index path just got called");
//JAMcustomCell *myCell = [[JAMcustomCell alloc]init];
static NSString *CellIdentifier = #"ListPrototypeCell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
Locations * locations = [[Locations alloc]init];
//tableView.backgroundColor = [UIColor blackColor];
// NSLog(#"this is visible '%hhd'", locations.isItVisible);
if(self.visibleCell==YES){
UIImage *clkImg = [UIImage imageNamed:#"alarm_clock.png"];
cell.imageView.image = clkImg;
}
if (tableView == self.searchDisplayController.searchResultsTableView)
{
locations = [self.searchResults objectAtIndex:indexPath.row];
}
else{
locations = [self.locations objectAtIndex:indexPath.row];
}
cell.textLabel.text = locations.locationName;
cell.textLabel.textColor = [UIColor whiteColor];
//cell.backgroundColor =[UIColor blackColor];
// cell.backgroundColor =[UIColor colorWithPatternImage:[UIImage imageNamed:#"Graytbl.fw.png"]];
cell.backgroundView = [[UIImageView alloc]initWithImage:[UIImage imageNamed:#"blueTbl.fw.png"]];
cell.selectedBackgroundView = [[UIImageView alloc]initWithImage:[UIImage imageNamed:#"blueTbl.fw.png"]];
// UIFont *myFont = [ UIFont fontWithName: #"Oswald" size: 25.0 ];
// cell.textLabel.font = myFont;
cell.textLabel.font= self.MyFont;//[UIFont fontWithName:#"Oswald-Regular.ttf" size:15];
return cell;
}
Try this approach, I used your idea of Bool
#pragma mark - Table View Data Source
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView
{
return 1;
}
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
return self.numberOfRows;
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
if(self.visibleCell){
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:#"imageViewCell" forIndexPath:indexPath];//ListPrototypeCell
UIImageView *imageVIew = (UIImageView *)[cell viewWithTag:1];
[imageVIew setImage:[UIImage imageNamed:#"alarm_clock.png"]];
return cell;
}else{
return [tableView dequeueReusableCellWithIdentifier:#"ListPrototypeCell" forIndexPath:indexPath];
}
}
#pragma mark - Table View Delegate
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
[tableView deselectRowAtIndexPath:indexPath animated:YES];
if(!self.visibleCell){
self.numberOfRows++;
self.visibleCell = YES;
NSIndexPath *indexPathCell = [NSIndexPath indexPathForRow:indexPath.row + 1 inSection:0];
[self.tableView insertRowsAtIndexPaths:#[indexPathCell] withRowAnimation:UITableViewRowAnimationBottom];
}else{
self.numberOfRows--;
self.visibleCell = NO;
NSIndexPath *indexPathCell = [NSIndexPath indexPathForRow:indexPath.row + 1 inSection:0];
[self.tableView deleteRowsAtIndexPaths:#[indexPathCell] withRowAnimation:UITableViewRowAnimationTop];
}
}
I created a demo project for you.
I hope it helps
I am trying to achive a email like select all functionality in uitableview where on same button tap user can checkmark or remove all checkmark and additionally user can also select/deselect rows(on didSelectRowAtIndexPath). I tried to do but its not working properly, here is my code.
- (IBAction)selectAll:(id)sender
{
if(myBoolean)
{
for (NSInteger s = 0; s < self.iTable.numberOfSections; s++)
{
for (NSInteger r = 0; r < [self.iTable numberOfRowsInSection:s]; r++)
{
[[self.iTable cellForRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:s]] setAccessoryType:UITableViewCellAccessoryNone];
}
}
myBoolean = NO;
[_selectUnselectButton setTitle:#"Select all Friends" forState:UIControlStateNormal];
}
else
{
for (NSInteger s = 0; s < self.iTable.numberOfSections; s++)
{
for (NSInteger r = 0; r < [self.iTable numberOfRowsInSection:s]; r++)
{
[[self.iTable cellForRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:s]] setAccessoryType:UITableViewCellAccessoryCheckmark];
NSLog(#"%d-%d",s,r);
}
}
myBoolean = YES;
[_selectUnselectButton setTitle:#"Unselect all Friends" forState:UIControlStateNormal];
}
}
-(void)tableView:(UITableView *)tableView_ didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell = [tableView_ cellForRowAtIndexPath:indexPath];
[cell setSelectionStyle:UITableViewCellSelectionStyleNone];
if (cell.accessoryType == UITableViewCellAccessoryCheckmark)
{
cell.accessoryType = UITableViewCellAccessoryNone;
}
else
{
cell.accessoryType = UITableViewCellAccessoryCheckmark;
}
}
I wrote a sample code that I adapted to your needs.
Basically it is
-(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *unifiedID = #"aCellID";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:unifiedID];
if (!cell) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:unifiedID];
}
cell.textLabel.text = [self.states objectAtIndex:indexPath.row];
//if the indexPath was found among the selected ones, set the checkmark on the cell
cell.accessoryType = ([self isRowSelectedOnTableView:tableView atIndexPath:indexPath]) ? UITableViewCellAccessoryCheckmark : UITableViewCellAccessoryNone;
return cell;
}
-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
NSString *state = [self.states objectAtIndex:indexPath.row];
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath];
if([self isRowSelectedOnTableView:tableView atIndexPath:indexPath]){
[self.selectedCells removeObject:indexPath];
[self.selecedStates removeObject:state];
cell.accessoryType = UITableViewCellAccessoryNone;
} else {
[self.selectedCells addObject:indexPath];
[self.selecedStates addObject:state];
cell.accessoryType = UITableViewCellAccessoryCheckmark;
}
NSLog(#"%#", self.selecedStates);
}
-(BOOL)isRowSelectedOnTableView:(UITableView *)tableView atIndexPath:(NSIndexPath *)indexPath
{
return ([self.selectedCells containsObject:indexPath]) ? YES : NO;
}
- (IBAction)selectAll:(id)sender {
[self.selecedStates removeAllObjects];
[self.selectedCells removeAllObjects];
NSUInteger numberOfSections = [self.tableView numberOfSections];
for (NSUInteger s = 0; s < numberOfSections; ++s) {
NSUInteger numberOfRowsInSection = [self.tableView numberOfRowsInSection:s];
for (NSUInteger r = 0; r < numberOfRowsInSection; ++r) {
NSIndexPath *idxPath = [NSIndexPath indexPathForRow:r inSection:s];
[self.selectedCells addObject:idxPath];
[self.selecedStates addObject:self.states[idxPath.row]];
}
}
[self.tableView reloadData];
}
- (IBAction)deselectAll:(id)sender {
[self.selecedStates removeAllObjects];
[self.selectedCells removeAllObjects];
[self.tableView reloadData];
}
- (IBAction)toggleAll:(id)sender {
if ([self.states count] == [self.selecedStates count]) {
[sender setTitle:#"select all"];
[self deselectAll:sender];
} else {
[sender setTitle:#"deselect all"];
[self selectAll:sender];
}
}
in action:
You are calling
[[self.iTable cellForRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:s]] setAccessoryType:UITableViewCellAccessoryNone];
for every row in every section within the tableView. if you have many row, this is ver inefficient, as it will deal with rows not on the screen. But this is not needed. just put every selected index path into an array and tell the tableView to reload. This will reload the visible cells and due to the implementation of -tableView:cellForRowAtIndexPath: cells wfor new rows will be correctly re-conigured.
Setting the accessory view needs to happen inside the tableView:cellForRowAtIndexPath: method. When you want to change the accessories from outside, the outside method needs to change the model first to indicate that check marks must be placed in certain cells, and then call reloadData on the UITableView.
One way to store what cells are checked is an array of NSIndexSet objects - one index set per section. In the example below I show code for a single section, but you should get an idea of how to make multiple sections work.
// This variable needs to be declared in a place where your data source can get it
NSMutableIndexSet *selected;
// You need to initialize it in the designated initializer, like this:
selected = [[NSMutableIndexSet alloc] init];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier];
}
if ([selected containsIndex:indexPath.row]) {
[cell setAccessoryType:UITableViewCellAccessoryCheckmark];
} else {
[cell setAccessoryType:UITableViewCellAccessoryNone];
}
// Do the rest of your code
return cell;
}
Now in the code where you want to set rows selected or unselected you just need to call [selected addIndex:rowToSelect] or [selected removeIndex:rowToUnselect], and call your table's reloadData.
Use selectRowAtIndexPath:animated:scrollPosition: to select a row
and deselectRowAtIndexPath:animated: to deselect a row.
For more read the UITableView docs
Try this code instead of your old one
- (IBAction)selectAll:(id)sender
{
if(myBoolean)
{
for (NSInteger s = 0; s < self.iTable.numberOfSections; s++)
{
for (NSInteger r = 0; r < [self.iTable numberOfRowsInSection:s]; r++)
{
[self.iTable selectRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:s]] animated:YES scrollPosition:UITableViewScrollPositionNone];
}
}
myBoolean = NO;
[_selectUnselectButton setTitle:#"Select all Friends" forState:UIControlStateNormal];
}
else
{
for (NSInteger s = 0; s < self.iTable.numberOfSections; s++)
{
for (NSInteger r = 0; r < [self.iTable numberOfRowsInSection:s]; r++)
{
[self.iTable selectRowAtIndexPath:[NSIndexPath indexPathForRow:r inSection:s]] animated:YES scrollPosition:UITableViewScrollPositionNone];
NSLog(#"%d-%d",s,r);
}
}
myBoolean = YES;
[_selectUnselectButton setTitle:#"Unselect all Friends" forState:UIControlStateNormal];
}
}
-(void)tableView:(UITableView *)tableView_ didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell = [tableView_ cellForRowAtIndexPath:indexPath];
[cell setSelectionStyle:UITableViewCellSelectionStyleNone];
if (cell.accessoryType == UITableViewCellAccessoryCheckmark)
{
cell.accessoryType = UITableViewCellAccessoryNone;
}
else
{
cell.accessoryType = UITableViewCellAccessoryCheckmark;
}
}
You can follow these steps to implement this,
1) You should have a mutable array to store indexpaths
2) What you can do is, when you tap Check All or Uncheck All, do add or remove all indexpaths to/from array (which you've), reload table for update changes
3) In - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath datasource method, check into array using if([array containsObject:indexPath]), if exist mark it checked or unchecked
4) In - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath delegate method, you should check for already existence of indexpath tapped into array, as you've did in 3rd step, and add or remove indexpaths as per the condition, reload table for update changes
Take another NSMutableArray as SelectedArray
in didSelectRowAtIndexPath row You can Add remove objects from SelectedArray.
You can select a UITableViewCell calling UITableViews selectRowAtIndexPath method:
[yourtable selectRowAtIndexPath:[NSIndexPath indexPathForRow:0 inSection:0]
animated:NO
scrollPosition:UITableViewScrollPositionTop];
Put for loop for selectedArray to putcheckmark only in selected cells or All cells.
check my accepted answer here : Need to create a select all button for UITableView and add selections to an array in iOS
Xcode 8x
Swift 3x
Select Row
let indexPath = IndexPath(row: 0, section: 0)
mytableView.selectRow(at: indexPath, animated: true, scrollPosition: .bottom)
myTableView.delegate?.tableView!(myTableView, didSelectRowAt: indexPath)
DeSelect Row
let deselectIndexPath = IndexPath(row: 7, section: 0)
myTableView.deselectRow(at: deselectIndexPath, animated: true)
myTableView.delegate?.tableView!(tblView, didDeselectRowAt: indexPath)
you can do something like this:
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
[self doSomethingWithRowAtIndexPath:indexPath];
}