Dears,
I have this case I am trying to make this Control work:
https://github.com/mikaoj/BSImagePicker
Its a image picker that needs to be installed using Cocoapods. I know its a newbie question.
But i downloaded the Installed cocoapods and then went to my example folder and ran the "pod install" and it was successfull:
"Pod installation complete! There is 1 dependency from the Podfile and 3 total pods installed."
So everything should be great. But when i open the project and try to run it, This error occurs:
"No such module 'BSImagePicker'"
I cant get how things work here. Is there is any further steps should i do after "pod install" I am new for cocoapods. Maybe something i missed.
Your support is appreciated
Thank you
Three points:
Make sure your pod file has use_frameworks! line uncommented. if not, uncomment and reinstall pods.
Make sure you have opened the workspace, not the project file. Clean (Cmd+Shift+K) and Build (Cmd+B).
In the code where you want to use the BSImagePicker, make sure you import it i.e. import BSImagePicker
I just tried it and it works fine, here's what the Podfile looks like:
# Uncomment this line to define a global platform for your project
platform :ios, '8.0'
# Uncomment this line if you're using Swift
use_frameworks!
target 'ExampleApp' do
pod "BSImagePicker", "~> 2.2"
end
target 'ExampleAppTests' do
end
target 'ExampleAppUITests' do
end
Related
Im new to swift and going through a Tutorial on integrating AWS tools and I keep getting this error, " No such module 'AWSCore' "
However, on the left, you can see these modules are downloaded and there in the pod File.
My question is how to get rid of these errors and correctly import those features. Any help on how to fix this problem will be much appreciated!
re-create a new 'Podfile' on the Root folder of your Xcode project by running the command:
$ pod init
Now make sure your 'Podfile' contains the AWSCore module like shown below.
platform :ios, '9.0'
target :'MyNotes' do
use_frameworks!
# Analytics dependency
pod 'AWSPinpoint', '~> 2.6.10'
pod 'AWSCore', '~> 2.6.10'
# other pods
end
Kindly note for every module you import in your project you will need to include it in your 'Podfile' and then update the 'Podfile' by running the command :
$ pod install
or
$ pod install --repo-update
Close the Xcode project and then open the *.xcworkspace file to relaunch Xcode
I was able to get past this issue by adding $(BUILD_PRODUCT_DIR) ------ recursive. I added it to me release settings as well.
Do not open PROJ.xcodeproj but rather open PROJ.xcworkspace in some case to build pods.
In your case, other answer should lead to right way.
I am trying to create a project which uses Realm and RealmSwift. I have used Cocoapods to install these dependencies. I have seen the other posts too on stackoverflow and tried their solutions. They don't work for me. In my project, I'm getting the error "No such module as RealmSwift" when I write the import RealmSwift statement. Here are the steps I took for installation:
I created an empty xcode project
I went into terminal and navigated to my project directory
I gave the pod init command to create a pod file
I went into the pod file(it already had the use_frameworks! statement
I wrote in pod 'Realm' and pod 'RealmSwift'. I gave the sources as:
source 'https://github.com/artsy/Specs.git'
source 'https://github.com/CocoaPods/Specs.git'
I wrote in pod install
The pods were installed successfully. I went into the .xcworkspace file.
I had already installed the realm plugin so I created a new realm object file
The template file opens with the following file. I'm getting the error that there is no RealmSwift module.
What am I doing wrong? Or what am I not doing? Is a bridging header required? Has anybody else managed to resolve this error?
Any relevant suggestions or insights are most welcome.
Its working now! Its so weird since I didn't do anything. I just went into my pod file commented out the use_frameworks! statement and ran pod update on the terminal. It gave me an error, so I added it back to my pod file. I wrote in pod update again and hit enter. I restarted Xcode cleaned it and built it and I wasn't getting this error anymore.
Need to uncomment platform in your pod file then try once again your pod.
# Uncomment this line to define a global platform for your project
platform :ios, '9.0' // Uncomment this
# Uncomment this line if you're using Swift
use_frameworks!
target 'Demo_Realm' do
pod 'RealmSwift'
end
target 'Demo_RealmTests' do
end
target 'Demo_RealmUITests' do
end
I can't seem to understand what is going on with my project and cocoapods, Xcode cannot find the frameworks except Firebase which is why I am confused. I'm getting the error Project ' file not found. Xcode also gives me the error, In file included from <built-in>:342: I have tried to clean and build, emptying Xcode's cache and reinstalling Xcode. Can anyone please explain this thanks.
Here's my podfile:
# Uncomment this line to define a global platform for your project
source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '9.0'
target 'Soar_iPad' do
# Comment this line if you're not using Swift and don't want to use dynamic frameworks
use_frameworks!
# Pods for Soar_iPad
pod 'Firebase'
pod 'Firebase/Auth'
pod 'ExpandingMenu', '~> 0.1'
pod 'SwiftyJSON'
end
I figured out what was wrong and why Xcode could not find the pod files. It was because my directory had double quotation marks in it, for example I had /username/Desktop/Project "MyApp"/Project and Xcode could not find my pod files. But for some reason I found that using single quotes worked so for example /username/Desktop/Project 'MyApp'/Project. It's weird but glad a solution was found. Thanks to everyone that helped!
Delete workspace (.xcworkspace)
Delete Podfile.lock and Pods/ directory
Make sure your project builds
Upgrade cocoapods gem install cocoapods (optional)
Close project and run pod install
Can you try this:
pod deintegrate
pod install
If it doesn't work, create a new project and add the same Podfile (just change the target name). Run pod install.
If it compiles fine, then your project must have been misconfigured somehow. You may want to migrate your project into that newly created one. (copy all files and add project references)
If it does not compile, I think there is something wrong with your system.
Please try those steps and let me know if it works.
It seems that you cocoapods is the latest version.
Try to install cocoapods that lower than 1.0.
config the podfile and run pod install.
I am a newbie when it comes to CocoaPods so please bear with me!
I am looking at the tutorial (https://www.raywenderlich.com/97014/use-cocoapods-with-swift) however this is using the dependency "pod 'Alamofire', '2.0.2'". I have looked online for over a hour now and I can't find what to use for the Charts framework (https://cocoapods.org/?q=charts).
So Far i have done the following steps:
1.
sudo gem install cocoapods
and got the following output:
2.
pod setup --verbose
and got the following output:
3.
open -a Xcode Podfile
and got the following result :
4.
Uncommented "use_frameworks!" and uncommented "platform :ios, '6.0'" and changed it to "platform :ios, '9.0'"
Now i am stuck as i don't know what dependancies i need to use for the charts framework. Apologies if this is a very simple answer!
Thanks in advanced for your help :)
EDIT: After installing the pod files i dragged the 'Charts.xcodeproj file into my project.
When i try and embed binaries i have various options:
When i add them and build i get the following errors:
Hey First you have to decide which chart library You want to use.
Something like this https://github.com/danielgindi/ios-charts
for above chart library you have to use
pod 'Charts'
in your pod file inside the project .
Now your pod file will be something like this
source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '8.0'
use_frameworks!
pod 'Charts'
Now open the terminal and go to your project directory and enter the command
pod install
and you are good to go.
Hope this help you.
Usually there are instructions on what CocoaPod name to use for installation on the GitHub or source code hosting page of the library.
After a pod install command under your correct project directory, you need to exit out of your .xcodeproject and open up the workspace file. This is what you do from now on after a project has a cocoapod dependency. The workspace now contains both your project, and the pods project as a package manager. The pod(s) you installed are there, and must be accessed by importing the name of the CocoaPod (can be seen in folder drop down view in the Pods project).
You do not need to drag anymore files in your own project or embed like before. Make sure to delete those.
If you're still having trouble, can you edit what your current podfile looks like?
I am getting an error when building my app after i removed reference to a framework i added incorrectly. i am new to ios and cocoapods
/Users/MyMac/Library/Developer/Xcode/DerivedData/MyApp-ewxrexwuczochyctnqvlyusrtvvy/Build/Intermediates/MyApp.build/Debug-iphonesimulator/MyApp.build/Script-5874133373474758EEC76CFD.sh: line 2: /Users/MyMac/Documents/MyApp/Pods/Target Support Files/Pods-MyApp/Pods-MyApp-frameworks.sh: No such file or directory
I am aware that the file and directory don't exist and that is the way it should be but where is it finding the reference to this file so i can remove it and be rid of the error.
I have checked the following:
Linked Frameworks andLibraries under the general tab of my project
The frameworks group in the project
framework search paths under build settings tab
i have also run pod update after removing it from the pod file
How can i fix this?
Edit
back story
I was trying to add the framework https://github.com/Alliants/ALAccordion . in the instruction it said to use
# Podfile
target 'My Target' do
use_frameworks!
pod "ALAccordion"
end
so i added MyApp where my Target is and it created a framework named Pods-MyApp which i cant remove completely.
hope this helps
Cocoapods wrote a tool to completely deintegrate all of this stuff from your project so it goes back to running standalone. It sounds like you had an issue adding the correct target, so use this:
https://github.com/CocoaPods/cocoapods-deintegrate
Then try again so you can at least start from good ground. Hope this helps!
It happened with a prerelease version of Cocoapods 1.2.0.beta.1, by reverting to stable version and running pod install, then clean build, it worked.
why
use_frameworks!
after
target ... do
here is example
platform :ios, '8.0'
use_frameworks!
inhibit_all_warnings!
target 'XXX' do
pod 'RealmSwift'
end
target 'XXXTests' do
pod 'RealmSwift'
end