I have been at this for sometime now and all I can find is simple Segues via google. I will do my best to show you what I am trying to do and provide snapshots as to what I am doing.
The middle controller is a simple segue to the map. It will be the root. I created a new file "Cocoa Touch Class"
Now I created a IBOutlet to the "Cocoa Touch Class" I just created for the map.
Now I get an error:
libc++abi.dylib: terminating with uncaught exception of type
NSException
Am I adding the controllers incorrectly? I am not sure what I am doing wrong.
The root or "Home" will send the user to many different pages depending on what they press. From my understanding user each page will be its own view like I am trying to do above. However I feel I am doing something wrong, I am just not sure what it is.
I think it's because in storyboard you have created UIViewController and attached it to UITableViewController. Try change Base class for your controller from UITableViewController to UIViewController.
The Problem Cause
When I added a new Swift class file to my iOS project, I decided I was indecisive and renamed it, deleted it, and created a new file. I think that I was actually so indecisive that I renamed it a few times.
The Problem
Now that viewController loads twice. I can literally see the transition happen twice and, during testing, I can see my viewDidLoad run twice in my console.
Common Fix
I know the first solution to check for is duplicate segues / segue calls. Check your document outline to see if there's more than one segue. In my case, it is definitely not a segue problem in the storyboard or the viewController.
My Uncommon Situation
I found someone who had the same load-twice problem and it was because of the rename:
They said it was the renaming I did that is at the root of my problem and it is not easy to fix because the duplication is now in my XML file. But where is this XML file and how do I edit it to erase the original instance of the class? I have no idea.
So how do I solve this loads-twice issue? I just want my viewController to have a normal segue!
Resolved my issue!
If you messed around with a class's name (or it's file name) and have the same "loads twice" issue that I was having, you might be having a hard time solving it. The only suggested solutions I found said to create a new project from scratch and copy stuff over. BUT, instead...
Here's the simplest solution ever:
Rename the class of the viewController that's loading twice! Don't worry about the file, but the view controller class within it. Your XML file probably has duplicates of the original class name, but rename your class to something entirely new and you should be okay.
Delete Segue and declare it the right way.
I faced the same problem. The reason was I ctrl dragged from the TableViewCell to target ViewController.
So I deleted the segue simply by clicking on it and pressing the delete key on my keyboard.
Then ctrl dragged from the ViewContoller of the first view to the second ViewController.
The wrong way to declare Segue
The Right way to declare Segue
It happened to me also. My case was for Creating a segue from my UIButton and performing it from source code.
If it matches to your case then just create the segue direct from the ViewController to your desired ViewController.
The perform the segue. It works.
I recently created the same problem where my view was loading twice. I have a tabbed app. The view controllers for each tab uses a Content View with a segue. For some reason I had set the Custom Class for the View Controller and the Content View Controller to the same custom class.
I don't know how both got set, probably something I did and forgot. If you are seeing a view controller load twice and the above answers didn't help, check to see if you have the parent view and the content view using the same custom class.
I have recently had an app rejected by Apple and when i attempted to make changes, my Main.storyboard was missing. I managed to delete the current reference and add an older version. After some tweaking, I restored the storyboard. (ALWAYS HAVE BACKUPS, KIDS)
I tried to run the new version, XCode could not find the first ViewController.
2014-09-13 22:18:42.453 Pong![1313:60b] Failed to instantiate the default view controller for UIMainStoryboardFile 'Main' - perhaps the designated entry point is not set?
Terminating in response to SpringBoard's termination.
I have checked the box "Is initial ViewController" but to no avail.
I too have faced the same problem while working in UINavigationController and segue.
The reason for this error is, the X-code complier can't able to find the initial starting view controller.
Solution:
There is no need to create new storyboard. Just select the view controller in your current story board which you wanna to make as initial one.Then click Attribute inspector icon on top right corner and make a tick of Is initial view controller.
Now Rebuild and Run app.
I had to create a new Storyboard file then copy it, then change the Main Interface option to the new one. The old "Main" was deleted.
Xcode 4.5.2 gives me the following warning:
Unsupported Configuration
Scene is unreachable due to lack of entry points and does not have an identifier
for runtime access via -instantiateViewControllerWithIdentifier:.
Unfortunately I can't identify the incriminated scene. Selecting the warning in the Issue Navigator doesn't highlight anything in the Storyboard. I have a fairly complicated storyboard (30+ scenes).
Any suggestions?
In your storyboard, select each of the view controller (red arrow in image below) and look at the Storyboard ID field (red oval). None of the Storyboard ID fields should be blank. When you find one that is, that is the culprit.
While this thread is old, I didn't see an answer describing what worked for me, so here goes...
I had this error and visual examination of the storyboard showed that all of the view controllers appeared to be connected to the root view controller.
I tried naming all 17 of the view controllers in the storyboard (as in #bobnoble's answer). I used a naming convention based on the long name of the view controller, e.g. "jvc" for "Jobs View Controller". When I tried to build, I got an error message pointing to one of the view controllers as having a duplicate name. Tracking things down, I found that I had an actual duplicate of a view controller stacked exactly on top of its twin. I suspect it was cut-and-paste damage from a user interface experiment that I didn't back out completely.
Anyway, deleting the unconnected twin solved my problem. After that, I removed all of the VC names as they're not referenced in the code.
I just had this exact error with a simple single-scene Storyboard, and all I had to do to fix it was check the "Is Initial View Controller" checkbox for the 1 view controller in the Storyboard. I suspect Xcode used to check this box for you by default in this situation, but no longer does.
Check the box for exactly one of the view controllers in your storyboard and you should be good.
I'm afraid you'll have to go through all 30 of them, and check whether they have a Storyboard ID or a segue to that view controller. One of the two is required, both is also an option.
This issue can happen in one the following scenarios:
Case I:
If none of the scene in the storyboard is marked as "isInitialViewController".
Fix:
Identify the root view controller and mark it as "isInitialViewController" in your SB.
In this case storyboard id is is not mandatory.
Case II
There can be situations where you do not need to have a initialViewController in a storyboard. For eg: when using Multiple storyboards.
Fix:
In such cases make sure the "storyboard id" is correctly given and you refer to the first scene to used in the storyboard using this id. For eg:
UIStoryboard *myStoryBoard = [UIStoryboard storyboardWithName:#"MyStoryBoardName" bundle:nil];
MyViewController *myViewController = (MyViewController *)[myStoryBoard instantiateViewControllerWithIdentifier:#"MyViewControllerId"];
In this case "storyboard id" is mandatory.
Case III
You have your initialViewController connected. But still you get this warning.
This is because some of the scenes in the storyboard may not be connected with a "segue" and also they do not have a "storyboard id".
Scan your storyboard, see if a "segue" is needed. Connect the segue if that is missing.
If a segue is not needed make sure you need to give a "storyboard id" since it is the only way to refer the scene from your code, as shown in the example code above.
Hope this helps
You don't need to set Storyboard ID for all scenes or UINavigationController
Well I have around 50-60 scenes and I just got these warning so that I realise that only the controller(Scene) or NavigationController which is not connected with segue needs to set Storyboard ID.
You can see that in above image UINavigationController is not connected with segue, it was a culprit of that warning.
Just give it a Storyboard ID to remove this warning.
I had the same issue. I've got lots of views on my storyboard with a nav and tab bar controller. For me it was just be a warning to let you know that some of the views are not connected.
Make sure all your views are connected in some way to the root view controller. I was starting this project from scratch to eliminate this warning and noticed the same warning when a view wasn't connected.
Simplest way to find the offending scene:
Go to the issue navigator (in the left panel, next to the search button), and double click the error. A window will popup containing the offending scene centered in the middle of the window.
(This is actually generally true - double clicking any error will generally result in a popup containing the error centered - a neat little trick!)
Side note: Sometimes, XCode will incorrectly give this error for a scene that is the root view controller of a navigation controller (that is the initial view controller). Simple fix is giving this root view controller a Storyboard ID, compiling (error should go away), and then removing the storyboardID (no error anymore).
The easiest way to see which controller, or scene, is causing this problem is by:
Ctrl-clicking your .storyboard in the Project Navigator and selecting Open As > Source Code. This will bring up the underlying XML of the Storyboard.
In this view, the warning will be clearly related to a line in the XML that relates to the offending scene.
Now, in my case, the warning was particularly annoying because the "offending scene" had an identifier and a segue! I was able to remedy the problem by deleting the scene and then undoing the deletion. Not elegant, but worked. I saved my Storyboard before doing this. In retrospect, I should have made a copy and diff'd the before-after.
For me, it wasn't because of a Storyboard ID or a Segue. I was receiving this warning because I had not set the View Controller's Custom Class.
Select the View Controller on the Storyboard, then in the Utilities Pane, select the Identity Inspector icon. Under Custom Class, see what value is inside of the Class field.
If it just says UIViewController, then you need to type in the class name. This will be the name of your .h and .m files that make up your custom UIViewController subclass.
I came to this question today. I'm using Xcode 6.3 and the answer to the OP's question is quite simple now:
Select the View Controller you wish to be the first one, show the Attributes Inspector, and under the View Controller section, make sure
Is Initial View Controller
is checked. Voilà!
With Xcode 7 this can be handled easily. There is no need to manually go through all the scenes to find a problematic one.
First go to the Report navigator, where you can get more detail info about known issues.
Issue description can look like this:
Base.lproj/Main.storyboard:fPh-fe-F5F: warning: Scene is unreachable due to lack of entry points and does not have an identifier for runtime access via -instantiateViewControllerWithIdentifier:.
With this info, you can copy object id, in this case it was fPh-fe-F5F, and search workspace for the occurrence of this string. String will be found in Main.storyboard file. Double click on search result and it will be opened Main.storyboard with selected scene. Once you know a problematic scene you can easily fix the issue, by setting storyboard ID or setting "Is Initial View Controller"
You can just set an identifier. On the attribute inspector on the right pane, you'll find a field called "Identifier". Just put any string in there , this should work
You can click on the navigation controller and under the attributes inspector click the button "is initial view controller", and this should work too.
i faced same problem and solved with put on storyboard ID any identifier for all viewController and NavigationController also; the error will be removed immediately
enjoy!!!
Maybe this XQuery will help you to find those nasty scenes
for $i in .//scene/objects/*[1][not(#storyboardIdentifier) or #storyboardIdentifier= '']/#id (: find every scene that has an empty storyboardIdentifier :)
where count(.//segue[#destination= $i])= 0 and $i!= ./document/#initialViewController (: filter the results to the scenes that are not destinations of a segue and exclude the initialViewController :)
return ($i, $i/../#customClass) (: return the storyboard-id and the customClass, if any :)
If you have xqilla installed, you would save the query to a file and use it like
xqilla <xqueryfile> -i <path to your storyboard>
I don't know if this hasn't been mentioned yet or not but another reason you could get this warning is if you have a segue going in the wrong direction. For example, in my project I was getting this warning but all my controllers were in fact connected. However, one of them had a segue that basically was trying present the parent from the child instead of the parent presenting the child. This caused the same warning.
I got this warning when i am having a UIViewController in Storyboard to which nothing is set.
I avoided this warning by setting Storyboard ID to it.
I had the same issue,but i realized that i was using container view and instead of deleting default view controller i deleted its segue.So view controller remained in storyboard and so was the warning. So this is one of the case where warning pops up if default view controller of container view is not deleted properly when you don't need it.
I tried everything described above to no avail. I had everything connected properly in IB, with exactly one UIViewController designated the root view controller. I had no identifiers but added them to all of my controllers.
The only way I could get the warning to disappear was by doing everything above (including a computer reboot and a clean build) then switching to an error-free branch of my project in git and back again.
Unsure which action fixed it, or which combination of actions, but it wasn't the clean build on its own. This might be a byproduct of Main.storyboard always changing upon simply being opened, which means I have to git commit -m "Stupid storyboard" more often than I want to.
Here is what worked for me:
Open the storyboard in a text editor.
Change version from 3.0 to 2.0 save and close it.
Open it again in visual studio. It will automatically convert and open the document.
I got the same error : For me the error was I did not initiate a view controller in my story board.
Fixing that removed that warning.
Simply giving all MVCs a storyboard id worked for me.