I have downloaded the lua binaries "lua-5.3.2_Win32_dllw4_lib" for MinGW, but i dont know where in the mingw folder to extract them. Does anyone know how to do this?
EDIT: Sorry not binaries, I ment DLL and includes.
This is not a dll/include for MinGW as it's a DLL/library compiled using MinGW. You need to make them available in your project directory and reference those files when you compile libraries/modules that need to reference Lua header files or libraries. See for example this SO answer on how this is done for luafilesystem module.
Related
This issue is driving me crazy. I'm trying to compile and install The QR Designer from QuickReports 6. I have an issue just with the one package. When I right the package in the IDE > Install the IDE gives me:
Can't load package C:\xe10_3\QRDesign\Win32\Debug\dclqrd_DXE10_3.bpl.
The specified module could not be found.
But the exact file is there.
I've also tried installing it via the menu under Components > Install Packages and then choosing the BPL from there, with the same issue.
I've tried to use Process Monitor as on this post here to find the issue:
Delphi Can't load package the specified module cannot be found
I couldn't fix the issue, but what I did pick up from Process Monitor was that some process was looking for the package here:
Computer\HKEY_CURRENT_USER\Software\Embarcadero\BDS\21.0\Package Cache\dclqrd_DXE10_3.bpl
That key didn't exists. I tried manually creating the key, but that didn't do a thing.
Any ideas?
UPDATE
Here is the list of packages:
As you can see, dclqrd_DXE10_3 is dependant on two others. Which I already built and installed. I removed its references and re-added them again now, to make sure the references are sound. I guess its like Remy said, the Specified module not found is probably not referring to dclqrd_DXE10_3 although I don't know what other module it could be referring to.
To install a package successfully in IDE, follow the steps:
Open the dpk/dproj/groupproj file in IDE
Build the package(s) for Windows 32-bit platform.
IDE itself is a 32-bit applicaton, so it should match.
Normally, it will build all dependent/required packages
Check if all chain of BPL & DCP files are generated in package Output directory.
It defaults to $(BDSCOMMONDIR)\Bpl & Dcp folders, but can be changed individually for each Package in Settings.
PBL packages are like DLL files. In order to load them, it requires all dependent BPLs.
If you have custom package output paths:
Check if your DCP output path is included in Tools\Options\Language\Delphi\Library Library Path for Windows 32-bit platform
Check if no duplicates of outdated compiled packages in default $(BDSCOMMONDIR)\Bpl & Dcp directories
Add the paths to library source pas files in Tools\Options\Language\Delphi\Library Browsing path or Library path
In some specific cases, if the package requires some extra dll-s like DB Client libraries, check if these dlls are 32-bit and are loadable, like included in %path% environement variable.
Note, some libraries offers package installer tools, that automagically do all mentioned things for you.
Also, there are universal package installer tools for quick working environement setup in one click.
I don't know why this fixed my issue, but it did.
The output directories for the bpl and dcp was set to be $(Platform)\$(Config)
The project files for the different packages exists in the same folder so the above config was supposed to be the debug folder or the release folder. Why only this package was thrown off I still don't know, but since changing the above packages to have a fixed path suddenly I could now install dclqrd_DXE10_3.bpl.
Thank you all for helping.
Im using Wxlua for a GUI im building but need minizip for one of my functions but have no idea how to install minizine to my lua dir.
I expect minizip = require('minizip') to work with my wxlua
minizip is not part of wxlua, so you need to follow the instructions from the source you got the package from. For example, this package provides all the necessary binaries, but requires LuaJIT or lua+luaffi to run.
Usually, it's sufficient to place binary files (*.so or *.dll) into a folder listed in package.cpath and lua files into a folder listed in package.path, but those files may have their own dependencies, so it's better to consult documentation for the module.
I'm attempting to use OpenCV for Windows as supplied by opencv.org in a project I'm building with JetBrains' CLion IDE. I've installed the opencv library and configured CLion (set(OpenCV_DIR) to reference the build directory under it, but CMake issues the warning:
Found OpenCV Windows Pack but it has no binaries compatible with your configuration.
You should manually point CMake variable OpenCV_DIR to your build of OpenCV library.
I've tried some of the older distributions from opencv.org with the same results. It appears CMake is locating the OpenCV libraries, but doesn't want to use them. Why, and how do I get the OpenCV libraries to work under CLion?
The short answer is, you will probably need to build OpenCV from source in order to use it with CLion. But given the number and range of partially answered and unanswered questions here* and elsewhere on using JetBrains' CLion IDE with the OpenCV library, I think an overview is needed (my notes are from CLion 2016.3 and OpenCV 3.1, YMMV):
Though not produced by JetBrains, CMake is very central to CLion's operation. Understanding CMake therefore helps greatly in diagnosing CLion build problems. In particular CMake maintains a disk "cache" of settings which you may need to clear to incorporate changes to your environment (Tools->CMake->Reset Cache and Reload Project).
To make use of OpenCV in your build you must specify it in your project's CMakeLists.txt file. You request that CMake locate your OpenCV location and link it to your TARGET. An example of a sequence of commands from CMakeLists.txt for an executable named mushroom follows:
add_executable(mushroom ${SOURCE_FILES})
FIND_PACKAGE(OpenCV REQUIRED)
TARGET_LINK_LIBRARIES(mushroom ${OpenCV_LIBS})
(For more on FIND_PACKAGE, see CMake:How To Find Libraries.)
FIND_PACKAGE for package XXX works either by way of FindXXX.cmake files located at CMake's Modules directory, or by consulting environment variable XXXX_DIR. On my system, no FindOpenCV.cmake file was present, so I relied on the OpenCV_DIR environment variable instead. This must be set, not to the root of your OpenCV installation, but to the build folder beneath it. I used an entry in CMakeLists.txt to set this variable, e.g.:
set(OpenCV_DIR C:/Users/myacct/AppData/Local/opencv-3.0.0/build)
To link with OpenCV, CMake uses either FindOpenCV.cmake or OpenCV_DIR (see previous point above) to locate a file named OpenCVConfig.cmake. This file is generated by and ships with a particular build of OpenCV in order to document what components are present and where they are located.
Problems may occur when variable names used by OpenCVConfig.cmake conflict with those CLion has stored in its environment. In particular, if your OpenCV was built by Microsoft Visual C (MSVC), as is the Windows distribution from opencv.org, it won't work with CLion.
Because CLion's build toolchain (ControlAltS-toolchain) uses either MinGW or Cygwin, OpenCVConfig.cmake will search for OpenCV binaries under a subdirectory named mingw or cygwin and will find none because the binaries were built with MSVC (it will look in a directory like vc11 or vc12 instead). This probably means you will need to build OpenCV from source in order to use it with CLion.
Would reconfiguring OpenCVConfig.cmake to point to the MSVC binaries make this work? you may ask. Unfortunately the answer is still no, because libraries built with one compiler typically cannot be linked with another one.
OpenCVConfig.cmake or FindOpenCV.cmake likely contain diagnostic messages, but when CLion executes CMake for you, message(STATUS) calls are not displayed. To make them display, change them to message(WARNING) or message(FATAL_ERROR). But CLion 2016.3 EAP relieves this problem; see https://stackoverflow.com/a/39398373/5025060.
CLion does not indicate which .cmake script issued which diagnostics; don't assume they all come from the same script.
Hopefully this provides some general guidance on resolving CLion / CMake / OpenCV compatibility problems. Note that this does not cover compiler or linker issues; these will not appear until CMake completes its initial makefile build. Compiler or linker issues occur at a later stage and are controlled by include*(), link*() and other commands in CMakeLists.txt.
*Some related SO questions:
OpenCV Windows setup with CLion
OpenCV CLion (Cmake) linking issue - cmake reports a strange error
use OpenCV with Clion IDE on Windows
Compiling OpenCV on Windows with MinGW
Could not find module FindOpenCV.cmake ( Error in configuration process)
CMake: Of what use is find_package() if you need to specify CMAKE_MODULE_PATH anyway?
Does anybody know how to build cvBlobsLib using MinGW? On official page http://opencv.willowgarage.com/wiki/cvBlobsLib there is only instruction for VS.
There is also linux version of this lib http://opencv.willowgarage.com/wiki/cvBlobsLib?action=AttachFile&do=view&target=cvblobs8.3_linux.tgz , but its makefile cannot be used in windows as i see.
If you use eclipse then you dont have a lot of work:
Create a new project, using MinGW toolchain.
Go to the project properties, and under C/C++ General >> Paths and Symbols add the openCV library paths.
compile the project and it should be OK.
Use this
http://opencv.willowgarage.com/wiki/cvBlobsLib#Build_intructions
if you have more problems (especially NOTE 3)
i'm using opencv2.1 with visualstudio2010
while debugging it is showing this error message:
'the program can't start because cxcore210.dll is missing from your computer. Try reinstalling the program to fix this program.'
but cxcore210.dll is already present in the /bin folder
any suggestions?
You need to make sure the dll is in your system path or in the same folder as the executable. The best way is to add the OpenCV /bin folder to your PATH environment variable.
http://www.mattmontag.com/development/notes-on-using-opencv-2-3-with-visual-studio-2010
With the runtime errors you are now having that suggest you are using the OpenCV binaries compiled in Visual Studio 2008, the easiest option is to get the OpenCV 2.3.1 Win superpack distribution. It comes with binaries compiled in vs2008 and vs2010. Please see my blog because it also has instructions for configuring this distribution! :)
http://sourceforge.net/projects/opencvlibrary/files/opencv-win/2.3.1/OpenCV-2.3.1-win-superpack.exe/download
Also - the documentation for OpenCV 2.3 at http://opencv.itseez.com/ is generally much cleaner and better than the other versions.