I am trying to integrate Gulp in TFS builds and web deploy using the article given here as reference. When I build the solution using the command (Alt+B+R), an output directory gets successfully created by gulp. But, when I try to queue a new build by right-clicking my build definition, the build fails with the following error.
Can anyone help to get rid of this error?
According to the error TF42097: A work item could not be saved due to a filed error.
The build uses the Default Template (or a customization) and has the Create Work Item on Failure option turned on, however the Bug work item has been modified in a way that means the build is unable to create it – which could be as simple as making a field mandatory.
How you fix this depends on how the Bug work item has been restricted. Work item fields that have been made mandatory should have a value specified in the build process template, and if that value should vary depending on the build definition you will need to expose it as an argument in the definition.
A workaround for this situation:
Adding in a PropertyGroup <SkipWorkItemCreation>true</SkipWorkItemCreation> will stop it from attempting to create the work item.
A similar question from MSDN for you reference.
Related
I have a custom TFS Build template that includes a procedure that runs a process that involves getting some data from a server and checking it into TFS before moving onto the main build process.
The steps are as follows:
Set build number
Run our custom script - get data, check into TFS
Initialize environment
Get sources from Team Foundation Version Control
Associate the changesets that occurred since the last good build
Compile, Test and Publish
The issue I appear to be having is that all change sets since the last successful build are included, except, the change set associated with the script run at step 2.
Does anyone know what could be going on here? my guess is that the logic that is looking for the change sets since last build is using a cut off that is set at the moment the build is requested (hence why the last change set is ignored) but this is just an uneducated guess.
Thanks in advance for your help.
Trying the steps below:
Edit your build definition and go to "Process" tab.
Enter "T" under "Get version" option.
Queue the build and check the result.
I would have two builds chained: the first build generates and check-in the files the second simply pulls them down.
I have created some custom CodeActivity-derived clases which:
successfully check an assembly info file, GlobalAssemblyInfo.cs,
changes the value of AssemblyFileVersion,
and then checks it back in, returning the change set value.
I based some of this work on Ewald Hofman's wonderful blog Customize Team Build 2010 – Part 5: Increase AssemblyVersion
The Problem:
Later in the build, one of my projects in this solution uses the version number to create a subdirectory by getting the version number from the newly built assembly. The problem is the subdirectory always lags behind in the version number. I've noticed that when I test the build definition based on the BuildProcessTemplate, that my included change sets never include the GlobalAssemblyInfo from that build.
The build log tells me that steps 1, 2, and 3 all work. It also tells me that Associated Change Sets in the summary don't include the change set number in step 3. Does anyone know how I can work around this problem?
I found the answer to this question experimentally. As soon as a build is started, that point in the version tree is used for the associated change sets. Since I am checking out and checking in a file after that point, it is not part of the build. I got around this problem by calling my GetLatest activity after the Get All (specific), as seen in the DefaultTemplate. It's accomplishes the goal of getting my changed version number used in the assemblies.
I have setup a build controller etc and the builds were failing, I have fixed these now and the build failed properly - as in because of an error.
I have fixed the error and checked the code back in but now the code is not being extracted, although sometimes one folder of many is.
I have deleted the code from the build machine and requeued a build but it keeps failing. It complains that it cannot find the solution that I specified as the build solution.
I have checked the check box to build even if nothing has changed.
Have I missed a setting somewhere for extracting the code?
TFS version is 2012 Express
Visual Studio version is 2010 Professional
I had this issue recently with TFS 2012. I think it boils down to this:
In the lastest build definition files, it appears that it performs a Clean task before updating the workspace. This means that if you do something that causes the Clean part of the build to fail, it will never download the new files in order to fix it.
Recently, I was making big changes to my build file and inevitably made a lot of mistakes, I found that if one of these mistakes caused the Clean to break, I had to go onto the Build server and change the file manually to get it working again.
Does this sound like it might be the same issue?
There are several properties in your build definition you can check. I would start with setting the "Clean Workspace" to All to ensure the correct code is being pulled down and built.
There are other checks you can look at as well like the agent set for the build and the "GetVersion" property. Check the below link out. It should be able to help you in more detail.
Define a Build Process that is Based on the Default Template
I've seen the question related to the error message you get from TFS when a workspace is already mapped. The accepted answer for removing the workspace is alright as a workaround, but it's already getting tedious to run a delete command each time this error occurs.
What do I need to change in order to get out of having to use this workaround? I've got two builds (continuous integration and nightly deploy), and need to add at least one more build type. I followed this URL to see if there was a possible resolution there, but I'm not sure I understand it completely.
I am not sure how this is accomplished in TFS 2010, as I have not gotten to work with Team Build in 2010, yet. In 2008, though, if you expand the Builds node in the Team Project and right-right click on either of the builds, you will see a "Manage Build Agents..." option. Click into that, and it will bring up a dialog. One of the things on that dialog is an option called "Working Directory". Do you have the same hard-coded path in both of them?
By default, when you create a new build definition, it provides a calculated folder for this value. This is where the build agent will do the checkout from TFS for the build attempt. The default value is, $(Temp)\$(BuildDefinitionPath), I believe (I am not connected to TFS at the moment).
The article you link to is basically saying that you should include either that $(BuildDefinitionPath) value or the $(BuildDefinitionID) value as part of that path in that dialog so that the two builds do not try to use the same workspace. Changing the working folder to include one of those values should resolve your issue, going forward.
I have a vcproj file that includes a simple pre-build event along the lines of:
Helpertask.exe $(ProjectDir)
This works fine on developer PCs, but when the solution is built on our TFS 2008 build server under MSBuild, $(ProjectDir) is either blank or points to an unrelated folder on the server!
So far the best workaround I have managed is to hard code the developer and server paths instead:
if exist C:\DeveloperCode\MyProject HelperTask.exe C:\DeveloperCode\MyProject
if exist D:\BuildServerCode\MyProject HelperTask.exe D:\BuildServerCode\MyProject
This hack works in post-build steps but it doesn't work for a pre-build step (the Pre-build task now does nothing at all under MSBuild!)
Do you have any ideas for a fix or workaround? I have very little hair left!
$(MSBuildProjectDirectory) worked for me
I think your problem may be related to how items are initalized. An items include attribute is evaluated at the begining of a build. So if you depend on files that are created in the build process you must declare these as dynamic items. Dynamic items are those defined inside of a target, or by using the CreateItem task. I've detailed this on my blog MSBuild: Item and Property Evaluation.
Sayed Ibrahim Hashimi
My Book: Inside the Microsoft Build Engine : Using MSBuild and Team Foundation Build
I think the problem is that build server's workspace probably isn't initialized properly.
I just kept getting problems with this - I tried many different approaches but they all failed in mysterious ways.
Once $(ProjectDir) started behaving properly again, the pre-build step stopped executing the command (I added echo commands above and below it - they were both executed, but the program in between them was not. No errors or output of any kind were generated to indicate why it failed).
I don't know if this is a dodgy server of if MSBuild is having a laugh.
I've given up now. I gave the build server a big kick and have changed tack: We now run this tool offline (manually) and check in the results for the build server to use. So much for an automated build :-( If only MSBuild would run solutions in the same way as Visual Studio does - it's maddening that it sets up the environment completely differently (different paths coming out of the solution variables, ouptus redirected into different folders so you can't find them where they're supposed to be, etc)
I branched an existing project and $(ProjectDir) kept the old directory in the newly branched code. But that's because I had some compiling errors. Once every project in the solution compiled without errors, $(ProjectDir) changed to the correct path.
Carlos A Merighe