I was looking at a couple CoreBluetooth tutorials for iOS. Based on the tutorials, it looks like one device is transmitting data and the other device is receiving. Like in this example: http://www.raywenderlich.com/52080/introduction-core-bluetooth-building-heart-rate-monitor the heart rate monitor is transmitting and the iphone is receiving. Is there a way to just connect to device to control it?
For example, I have a soundbar that is Bluetooth and can I write an app to do the same thing the remote it comes with does (volume up, volume down, input source change, power off)?
Adafruit proposes a lot of tutorials / material to learn how to use BLE (Bluetooth low energy)
tutorial about their BLE module (that could run with an Arduino): https://learn.adafruit.com/getting-started-with-the-nrf8001-bluefruit-le-breakout
tutorial about their iOS app (to connect to the previous module): https://learn.adafruit.com/bluefruit-le-connect-for-ios
iOS app source code to connect to BLE devices or play with previous module: https://github.com/adafruit/Bluefruit_LE_Connect
If you need one way transmission with the maximun data rate you need to read this article:
http://www.tbideas.com/blog/2013/04/Optimizing-Bluetooth-Low-Energy-Performance/
it talks about CBCharacteristicWriteWithoutResponse
Stackoverflow thread about the same one way communication subject:
iOS. BLE. CBCharacteristicWriteWithoutResponse - How to make it work?
Hope this helps!
Related
For a project of mine I need a pairless bluetooth data transfer. I have first thought about doing it with BLE IBeacons but they can only advertise a very limited amount of data. I looked further through the Apple documentation and found this tutorial about Central/ Peripheral
BLE data transfer. I've implemented the code in my project but even though the devices were very close together they could not "see" each other. I have since looked up on the Internet and could not find a hint about whether the devices need pairing or not and what the problem of mine could be(the code is not throwing any errors nor warnings).
If it does require pairing, is there some way to do that in the background without requiring the user to perform an action, so that I could theoretically advertise some kind of pair request via. IBeacons to then transfer the data? If that's not the case, is there even a way to transfer data (mono directional, round about 512 bytes) between nearby bluetooth devices without user actions?
greets from germany!
To get started with Bluetooth Low Energy or any other protocol, it's best to learn how it works. At least basics.
Simplifying. BLE allows you to send data:
"Passive" (without conncetion) - over Advertisement Data. The size of the packages depends on the BLE version.
"Active" (requires connection with the device) - bidrirectional comunication. In this case size of the data package also depends on the BLE version.
Bonding and pairing is a separate issues.
I suggested you look at the following book:
https://www.oreilly.com/library/view/getting-started-with/9781491900550/
The websites of BLE module manufacturers also offer a lot of information about this technology. For example Nordic or TI. Very often with sample programs for various platforms.
For iOS:
https://developer.apple.com/videos/play/wwdc2017/712/
https://developer.apple.com/bluetooth/
You may also be interested in sending more data without connection using version BLE 5.0
https://www.bluetooth.com/blog/exploring-bluetooth5-whats-new-in-advertising/
I'm hoping to create a BLE advertisement on iOS where I can control the advertisement on a byte level.
One use case would be to mimic an iBeacon advertisement. What is the iBeacon Bluetooth Profile (I want to advertise while my app is in the background which is why I'm not using CoreLocation)
I do not see a way to do this with the Core Bluetooth API. Is this correct? Are there alternatives using private API's or jailbreaking?
As the others already pointed out, there is no API on iOS that allows you to do this.
You can advertise as an iBeacon, but only when your app is in the foreground. When in background, the advertisement is removed and therefore cannot be discovered anymore (except for other iOS devices which explicitly scan for that service UUID). Also see the documentation here: Core Bluetooth Background Processing
If you would share your use case and what you want to achieve, maybe there are other ways to realise it.
My experience with iOS is that if it is something is not exposed in the API, there is no way around, except jailbreaking. For Bluetooth low energy the API is at GAP/GATT level, and very little at the lower levels (if anything) is exposed. Advertising is a LL (link layer) feature.
To illustrate how restricted the access is: When scanning for BLE devices you will not have access to the advertiser's MAC address iOS. In Android you have it.
I do not see a way to do this with the Core Bluetooth API. Is this
correct?
Since you have to set Manufacture Specific Data in order to achieve this, if nothing has changed you will experience exactly the same issue that I did. Explained here:
The advertisement key 'Manufacturer Data' is not allowed in CoreBluetooth
It is not possible.
I am looking for a BLE that could send live sensor data from arduino to iOS custom apps, not the app that is already in the app store. I would like to create my own apps to receive the sensor data.
Or are there any other ways to achieve it?
Please help. Thank you.
You want to use Core Bluetooth. It's a fairly low-level API that lets you set up one device as a "central" and another device as a "peripheral". You can then transfer data back and forth. Do a search on "Core Bluetooth Overview" in the Xcode docs to get started.
As Computer_ACE suggested you should also check out the Arduino Stack Exchange, or you might want to go to the Arduio forums at https://www.arduino.cc.
EDIT
A quick google search on "iOS Arduino BLE example" found this link:
https://www.google.com/search?client=safari&rls=en&q=ios+arduino+BLE+example&ie=UTF-8&oe=UTF-8
I am new to Objective c and I want to send simple strings from an iPhone to an arduino an vice versa with Bluetooth. I have read apples information about Core Bluetooth, but I am having trouble understanding it. As I said, all I need the iPhone to do is: 1) connect to the BLE device of the arduino. 2) Send instructions (in the form of strings) 3)get a response from the arduino when the instructions have been carried out, so that the next set of instructions can be sent. I would be very happy if somebody is able to help me with this project
Thanks
You should follow the wwdc presentation on core bluetooth.
You should probably start here
I suggest operate your device with YMSCoreBluetooth.
The basic step to operation bluetooth device is:
Search all nearby device by blue tooth scan, you will find all nearby device.
Stop your scan. Connect one of the devices found in response.
Discover all services on the device.
Discover all character in service found by service discover action.
Write your content into character found in 4.
You can read character value from device.
YMSCoreBluetooth let you write your logic in one code block instead of separate delegate.
I am trying to wrap my head around the possibilities of the HM-10 but am very new to a lot of how it works. I am only familiar with higher level things.
I originally thought I was going to use the hm-10 as an iBeacon but quickly found out it's limitations. Here was the original plan prior:
iBeacon(HM-10) broadcast in a particular room, when I walk in with my iPhone, it detects my iPhone and then does something, i.e Sets one of its Pins to High.
But based on my research now, this is not possible with iBeacon? I need to use iBeacon broadcasting in hand with regular bluetooth?
As in, upon my App/Phone detecting the iBeacon it then pairs with the HM-10 and sends an AT- command to set one of the pins HIGH.
Does all of this make sense? Could anyone provide some more input?
I am in the process of putting together an iPhone App but just wanted to know if I am on the right track.
Since the HM-10 is based on the CC2540, it should be possible to turn it into a Bluetooth LE beacon, including one that supports an iBeacon format.
A few thoughts to help your understanding:
Standard Bluetooth LE beacons (AltBeacon, iBeacon, URL beacon) are transmit only devices that don't detect phones -- phones detect them using a custom app. So when you say "it detects my iPhone and then does something" this is diverging from a standard Bluetooth LE beacon.
The concept of "pairing" with a Bluetooth device is typically related to Bluetooth classic (e.g. pre-4.0) technology. Bluetooth LE devices like the beacons mentioned above have the concept of connecting to read and write GATT characteristics.
If you do build a custom BLE device that out of a HM-10/CC2540, it would be possible to make it "detect" mobile phones, perhaps by advertising a GATT service, and then doing something upon connecting and/or writing to a characteristic. Since the CC2540 contains GPIO pins, it would be possible to make it "do something" by making a pin go high.
There are two big chunks of work to doing what you describe: (1) writing custom firmware for the CC2540 and (2) writing an iPhone app using CoreBluetooth and/or CoreLocation iBeacon APIs. Before starting on the iOS side, you need to figure out how the Bluetooth device is going to work.