I am designing a table view in which I have a custom cell in which I am trying to design a few views and sub views. I have placed my views as per the following hierarchy and constraints -
And here is my main story board -
I have given my table view cell's content view as orange colour and I have placed a view with yellow colour. I have pinged it to the content view of the cell. My storyboard is of the size 600*600 freeform(Size class - wAny hAny). When I run my app in ipad, it keeps a space as shown below between the cell's content view and its subview even on pinning the subview to all sides of content view-
So,what might be my problem and what mistake am I making? Thanks.
I think the problem is because of the sizing classes (like in the image).
if your app is universal (for both iPhone and iPad) make sure you choose it like the screenshot (w Any, h Any).
Please let me know the current settings.
Update
After sending me the storyboard. I have used it as it is in a new project. and that's how it looks in both iPhone and iPad
It looks fine in both of them. my best guess is it's a problem of the
preview only(which doesn't matter).
If you change the scene size from iPhone 4 inch to inferred
it solve the problem in the preview as well.
Related
I used to be able to do this:
UIButton *bigBottomBtn=[[UIButton alloc]initWithFrame:CGRectMake(0, self.view.frame.size.height-60, self.view.frame.size.width, 60)];
I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent.
What is going on with Xcode, Autolayout and Apple for that matter....is my Xcode not working properly? Have I missed a major memo? is Apple just going downhill fast?
Your button-creating code used to work (and still does) if self.view's frame was correct at the time you created the button. Note that the view doesn't necessarily come out of the xib or storyboard with the correct frame; the xib/storyboard contains the view at some design size which might not match the current device. This wasn't as much of a problem when all iPhones had 3.5 inch screens, but became a pretty common problem with the advent of the iPhone 5's 4 inch screen.
The view isn't guaranteed to have its correct frame until its superview's layoutSubviews returns, so if for example you're creating bigBottomBtn in viewDidLoad, that's too early. Many questions on stackoverflow cover this problem. You either need to set the autoresizingMask of the button, or implement layoutSubviews or viewDidLayoutSubviews to update the button's frame, or turn off translatesAutoresizingMaskIntoConstraints and install constraints. Note too that your view can change size if you support rotation, slide over or split view multitasking, or if your view can be the detail view of a UISplitViewController, so it's a bad idea to try to guess the correct frame of the button based on the device's screen size at the moment the button is created.
Note that storyboards now by default use a design size of 600x600, which isn't the size of any device. This is probably because if Apple chose some device's size (say, the iPhone 5's 320x568) as the default, and you happened to use a device of that size as your primary (or only) test device, you could easily forget to think about what your app will look like at other sizes. However, you can explicitly set the design size to some device's size if you want:
I usually use “iPhone 3.5-inch” if I don't specifically need something bigger, because it lets me get the most scenes on the screen simultaneously (and produces the smallest screen shots for stackoverflow).
As for “I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent”, I have good news: you still can. Example:
However, you do need to be careful if you have filled your root view with a table view as appears to be the case in your screen shots. You need to drag the button to the document outline in that case, because if you drop it on the table view, Xcode will assume you want it to be the table view header:
Trying to pin a table view header to the bottom of the screen would be folly.
As for the Editor > Align menu, I have found that the items can be mysteriously inactive, which is frustrating.
Note, though, that only the “Horizontally in Container” and “Vertically in Container” will work (when they work at all) with a single view selected. To use the other items in the menu, you need to have at least two views selected, because the other items align the selected views with each other by setting their frames:
If you only have one view selected, Xcode doesn't know what other view you might want to align it to.
Those menu items are perhaps useful in the springs'n'struts model, but they don't add constraints, and under autolayout you probably want constraints to enforce the alignment at run time.
As far as I know, those menu items have never added constraints, but I'm not going to reinstall Xcode 6 to verify that, because there's a convenient popover that will add constraints corresponding to all of those menu items:
In xcode you always need to add buttons according to its visibility. As you said you need to show button on top of tableView and it should be aligned to bottom. For that You just need to arrange the order of items. as shown in the image below.Provide the layout for the button.
I am trying to wrap my head around the new size classes in iOS8 and XCode6. I am attempting to create a nib, without a storyboard, and do something really simple--center a UIView on the screen.
Starting with a nib in the default size: w:Regular h:Regular, I place a 200x200 UIView onto the parent view and center it, then add contraints to pin it. In my preview pane, the UIView only shows up on the iPad view.
I need for this view to show up on iPads in lanscape and iPhones in portrait. I suppose some day i will understand why Apple thinks this is so much easier, but at the moment I'm bewildered.
When I switch my design view to any of the iPhone supported modes, the UIView disappears.
Even when I unpin the UIView and move it around in the design view, it never shows up in the iPhone view. In other words, I've tried everything to get this view to appear on an iPhone and nothing works.
Here is my UIView and settings:
Obviously there is something I'm missing, but I'm getting really frustrated trying to figure it out. Can anyone offer a clue? Thanks!
It's because you defined your view only for the size classes Regular & Regular. For them to show up on the iPhone you will have to configure the view also for the appropriate size classes, which in case of the iPhone is Regular & Compact where (<height> & <width>).
UPDATE:
The views generally only show up in the size classes for which they are configured. You currently have Regular & Regular selected, this can be seen from your screenshot. This means you defined it only for the devices with size classes Regular & Regular, which is the iPad in both orientations.
You need to add the views also in the size class that you are targeting, which are the size classes of the iPhone.
I am curious if it is possible to configure collection view items to have variable/dynamic sizes from right inside storyboard?
With the introduction of adaptive layouts and the storyboard preview mode, it seems counterintuitive to me that we should be restricted to hardcoding collection view item sizes. It also makes it a little more challenging to use the preview mode to debug your constraints.
See the below screenshot for an example. In the screenshot I have a collection view displayed on 3 different phone sizes. In my case I want each collection view item to be the entire size of the screen. I've set the collection view background to red and the background of the first cell to be blue (the second one has a white background). My collection view has constraints that pin it to the borders of the screen and you can see that it scales properly. However, my collection view items remain the size that they were hardcoded in storyboard (320 x 600).
I can manually increase the cell size to match iPhone 6's screen and you can see that my constraints within the collection view scale nicely but now the preview mode looks messed up for the 4in and 5.5in sizes:
FYI I know how to adjust collection view item sizes programmatically using the UICollectionViewDelegateFlowLayout and I am also aware of the super awesome new estimatedItemSize property for adaptive layouts so if necessary I can do this in code. The issue I am trying to solve is that you cannot simultaneously preview a collection view in storyboard for more than just one size.
In my dream world I could attach constraints to the size of a collection view item...can it become reality?
I have a problem adapting my apps to the new iphone5 layout, I've made the following passes:
Added a retina 4" splash image
Modified the interface in my storyboard with "Size inspector" to change the anchoring of the widgets
Tested the app with iOS6 "retina 4" simulator.
The app works as expected except when the user pop up the keyboard to edit a text, I use the "stretching scrollview" method for this particular situation and this seems not compatibile with the "autosizing" properties of my widgets, here is an example, from iOS6 simulator, without and with keyboard:
And here is what happens:
I'm quite sure this is a coherent behaviour since my main view is stretched so the other items inside it are stretched following their anchoring, the fact is that I'd like to have the same behaviour of my previous fixed position (all widgets anchored to the top left corner) with the iphone5 gui expansion, is this possibile?
How do you solve the problem of showing a keyboard and scroll hidden content in an iphone 5 compatible way?
I have been having similar problems. From what I have found thus far, we may need to remove all constraints on the view within the scrollable view, because it appears that it's contents are being resized along with the frame of the scrollView. I know that setting the internal view's frame manually in viewWillAppear will work, but then you are stuck having a view that is the same size for both iPhone4 and iPhone5 (albeit it will scroll). Or you could "pin height and pin width" of the internalView right there in storyboard.
Two potential approaches that may work. Sorry I can't confirm these as I'm giving up and redesigning around this problem.
1. Programmatically add constraints to your internal view's subviews. The programmatic constraints will allow you to "spring" the distance between your elements proportionally. When adding constraints programmatically, you are given access to a factor called "multiplier" (not to be confused with priority), which I saw someone else on stackoverflow posting about.
2. You can design the internalView in Interface Builder as a separate viewController with it's .xib file, and then use storyboard to load it as an embedded viewController to a "containerView" object, which you would put in place as the new "internal view" of the scrollView. Perhaps then the .xib would first resize to the correct iOS device, and then you could use its frame to resize the containerView.
My advice is create a small test-case of these before implementing, else you end up like me, having spent hours down the wrong path and facing a dead-end.
UPDATE 12/4/12
Make your life easier by NOT setting the ScrollView as the main view of the ViewController.
--Instead, make ViewController.view a dummy/blank view, and embed a scrollView inside that view. Then, embed another view (my CustomView) in the ScrollView. CustomView contains all the visible controls and text boxes and buttons. There is NO HEIGHT CONSTRAINT on CustomView.
I have a vertically scrolling uiscrollview - imagine an 'about this app' page of a tab bar app which goes on a bit and requires a scrollview. It only contains a few images, a video and some text (only the video has been coded in - the rest have been placed in the GUI). In storyboard (Interface Builder?) Xcode 4.2, everything is set up as it should be and works fine, but the view is only as large as what you see on the screen, is it not possible to manually arrange in storyboard the items that are initially offscreen - that you need to scroll up to? The only way I've found so far is to design them on the visible view then navigate them down with the arrow keys..
In the storyboard select the viewController, then in Attributes inspector change 'size' to 'freeform'. Then change the 'height' of the view/scroll view to as big as you need. The default settings of struts and springs should take care of resizing the view back correctly when the app is run, but you should double check.
I feel your pain. The only way I found is to manually pan the scroll view in the size inspector to reveal the portion of the view that you wish to visually edit.
Use a UIView to contain elements so they are positioned relatively to this view. Add the view as a subview to the scrollview at 0,0.
pan: use the Y coordinate say to -200, then edit the contents.
to place more contents in the hidden part, pan again to reveal new real-estate
when finished, restore the values of the ScrollView's height and X,Y position.
Make sure the scroll view frame rectangle is smaller than the contained view.
New: 3/26/2013
I stumbled upon what I think is even simpler way of dealing with UIScrollView directly in storyboard.
No code needed, just storyboard settings. This maybe new in iOS6.1 / Xcode 4.6
No need to disable constraints (i.e. uncheck "Use autolayout" in File Inspector for storyboard file)
No need to add UIScrollView* scrollView; in .h
No need to add self.scrollView.contentSize = ... in overrides of viewWillAppear or viewDidLoad
Here is what I did (important parts highlighted with **): (see code)
Create a new project with storyboard enabled
Drop in a UIScrollView, set class in identity inspector for view controller
In attributes Inspector, change Size under simulated metrics to Freeform**
Select scroll View; In attributes inspector, turn on "scroll enabled" and "background" to "White" (you'll figure out why - if you don't)
Under Size Inspector (with scroll view selected) change the height to 900 for example**
Add buttons, one on top and one at the bottom
Add a default handler for buttonTouchUpInside for both buttons and simply Log sender.
See Code Select the View Controller and scroll view and check inspectors.
Just change the 'Simulated Size' of the view controller to freeform and set a height that is larger than the usual size, you will be able to see all the outlets you need to edit.
On iOS 6.0 you can drag a Container View inside your Scroll View. This will automatically create a new View for your content, outside of the current scene. You can then resize this view as big as needed to fit your content.
I believe you would still have to set the ScrollView content height at runtime, but at least you can design you content view at once without having to scroll up and down on IB.
Just uncheck the "Autoresize subviews" from any view that you're trying to resize and it should keep all your objects from resizing with it.
I've been struggling with this for a while now, and every single thing I've tried has failed.
Specifically, What I am trying to achieve is a freeform sized modal dialog with a scrollable view containing a container for another view. I have had a lot of varied results, including occasionally having it working correctly. Most often I get it looking exactly correct, but with no scrolling.
In finally downloaded Dickey Singh's code, which worked perfectly but had nothing special. (Excellent clean solution BTW). So, I added a container view to it, exactly as I had in my code, and it broke!
After some experimenting, I worked out what is going on. Just bear with me.
1) Using Auto Layout, the size of the scroll view seems to dictate what the scrolling bounds will be. Setting "contentSize" in "USer Defined Runtime Attributes" seems to have no effect on this, and neither does setting "contentSize" or "bounds" in "viewWillDisplay" or "viewDidLoad". Thus if the initial size of the scroll view is 800x800, that will be all the space that can be displayed. For this reason, when I want a scrollable region, I create a container view and then put the scrolling view inside the content.
2) Without Auto Layout, setting "contentSize" in "User Defined Runtime Attributes" works, as does by setting it programmatically in "viewDidLoad". I prefer to use "User Defined Runtime Attributes" because it keeps the size with the layout. This solution allows you to use scrolling view with more flexibility, since it can be any size at design time.
3) Regardless of Auto Layout, if any view within the scrolling region exactly matches EITHER the horizontal or vertical frame bounds, then the scroll view ceases to function as a scroll view. This applies to my own code and to Dickey Singh's code in every possible configuration that I have tried.
I have no idea what is causing (3), but it is clearly a bug.
I hope this helps everybody out there who is struggling to use scroll view. I imagine that some people are using them without any problem, and some (like me) have had noting but problems with them.
Here's my solution to design a ScrollView with a content larger than the screen entirely in Storyboard (well, except for 1 single line of code :-) :
https://stackoverflow.com/a/19476991/1869369
I'm currently developing an app for iOS 7, and I did exactly as #Dickey Singh's answer, but it doesn't work in the beginning.
After checking the storyboard, I found that we also need to add Auto Layout Constraints for the view controller who holds the scrollView.
It seems that such auto layout constraints would be added automatically before Xcode 5, but now we need to do it ourselves.
The way to add constraints: First select the view controller in the storyboard; Enter 'Editor' in the top menu; Select the 'Resolve Auto Layout Issues'; Select the 'Add Missing Constraints In Container'. Done :-)