I updated Xcode to version 10 recently and started to receive a strange error when trying to build my project. I'm currently on Swift 4.0 and I did try to upgrade to swift Version 4.2. But when I did I received this same error in many of my frameworks.
Command Compile Swift failed with a nonzero exit code
So far I've deleted the derived folder. Updated all pods, also deleted all pods and reinstalled them using the terminal commands below.
sudo gem install cocoapods-deintegrate cocoapods-clean
pod deintegrate
pod clean
pod install
This didn't work to fix my issue. However, I found something that could work which was adding arm64 architecture in Build Setting -> valid architectures and enabling automatic code But, when I checked it was already there and code signing was enabled already.
Additionally, I do have a few other build errors that have to do with frameworks.
SwiftMessages
Value of type 'SwiftMessages.Config' has no member 'presentationContext'
WhatsNewKit
Missing argument for parameter 'backgroundColor' in call`
I opened issues with the developers of each of these frameworks to seek help with these issues.
Issue On SwiftMessage GitHub
Issue On WhatsNewKit GitHub
When I click presentationContext it brings me to the struct within the SwiftMessages Framework. Usually, when I've had the "has no member" warning I cannot click to see the original place where it exists.
I assume this has something to do with cocoa pods, but haven't been able to find a solution yet. What can I do to correct this issue? If anyone could help would be deeply appreciated been stuck on this for a day now.
Update:
The two frameworks latest builds were for swift 4.2. When I changed the version of each framework to one that was built in swift 4.0 I got the project to build.
Make sure that, your project Swift Language Version is in the proper version. SwiftMessages 6.0.0 works with Swift 4.2.
I solved this way:
Comment all pods in your .pod file
From your terminal, run the command pod install --no-repo-update
Open Xcode perform a clean and rebuild the project
Now open your .pod file and uncomment the first library
From your terminal, run the command pod install
Repeat steps 2 - 3 - 4 -5 for each uncomment library in your .pod file
I hope it can be of your help.
Make sure that, Your project build settings Optimization Level is in No Optimization[-Onone].
for pod SwiftMessages if your app is not swift 4.2 you need to user the version 5.01
pod 'SwiftMessages', '~> 5.0.1'
and it will work like a charm
Set Swift version to 4.2 then pod deintegrate, pod install, fix this problem for me. Thanks #alejandro-iván
Good Morning!
Do a clean. using"commond + shift + k
Close Xcode.
Navigate to project directory where the Podfile exist.
Do pod update/pod install
Open x.xcworkspace
This error happened to me when I used same class name in two different groups. Then I renamed one of the classes and the problem was solved
All of the answers were helpful to me. In my case, I only install frameworks manually but this kind of problem also happens. I tried all of the answers and was still getting this issue during the build. Curiously, while coding, I could cmd-click and resolve all of the "missing" components. I also cleaned and deleted derived data, restarted Xcode, etc.
I eventually got it working by inducing these additional steps:
On each of the framework project/targets (including my own):
Verify consistent Swift version (4.2 in my case)
Set Build for Active Architecture Only to No
Set Valid Architecture to arm64, armv7 (to match with base project)
Set Optimization Level to None (for Debug)
Set Compilation Mode to Whole
I had several frameworks (homegrown) plus my app. Somehow they ended up being out of sync as far as the Swift version. Make sure that all frameworks are the same version. In my case, they all needed to be set to Swift 4.2. If you haven't done the migration to 4.2 then remember that Xcode helps with this: Edit -> Convert -> To Current Swift Syntax.
only for re-install pod using that command pod install
see below attachment
In my case I connect an actual iphone not simulator and run the app once on it, It solved the problem. But connect iphone firstly, then choose it from this menu, then press run button.
The problem will solve too.
I stumbled upon this problem when upgrading to Xcode 10.2 and Swift 5. After trying everything I found this in the release notes:
The Swift compiler may crash during a build when the Thread Sanitizer
is enabled. (48719789)
And sure enough, efter turning off Thread Sanitizer my project could be compiled without errors again.
So if you get this error and have Thread Sanitizer enabled - turn it off!
Same issue happened to me in Xcode 10.2, it was a Xcode bug..!
So, I opened in older Xcode version(9.4), and it worked fine. Then I updated to the Xcode 10.2.1 after it's release -> Clean and build your project, now my problem solved.
I'm having the same problem, my Xcode version is 10.2.1 (10E1001),
Cocoapods version is 1.7.0.beta.2.
I returned to Cocoapods 1.6.1 and the problem was solved.
The specific steps are:
pod deintegrate to cancel the integration.
Uninstall all Cocoapods.
for i in $( gem list --local --no-version | grep cocoapods );
do
gem uninstall $i;
done
Install the stable version of Cocoapods. For now it's 1.6.1.
gem install cocoapods
Clean Project and empty DerivedData
pod install
Recompile the project
In my case it was a code error:
self.myDto.map{ (dto)} in
var stringValue = (dto.value(forKey: "name") as! String)
stringValue.append("c")
return stringValue
}
Just removed that stringValue variable fixed the problem.
I just had the same error message and none of the answers here and in the duplicates of this question were applicable to my project or helpful.
I kept on reading through the error messages and came to a realisation that I had stupidly named two seperate swift files in different folders with the same name intending to change one, but before I got to change one, I tried to run my project and have been annoyed for the last hour.
Bottom line, don't accidentally name your files the same name and read your error codes thoroughly!
target 'XYZ' do
# Comment the next line if you're not using Swift and don't want to use dynamic frameworks
use_frameworks!
# Pods for xyz
pod 'SwiftyJSON'
pod 'Localize-Swift'
pod 'Alamofire'
pod 'Kingfisher'
pod 'Tabman'
pod 'RSSelectionMenu'
pod 'Pushbots'
pod 'ACProgressHUD-Swift', '~> 1.4'
pod 'SKPhotoBrowser'
pod 'ZoomableImageSlider'
pod 'RSSelectionMenu'
pod 'DropDown'
pod 'ImagePicker'
end
I updated platform :ios, '10.0' to 11.0 and the error disappeared. Change your platform or OS version and check. Hope that could help.
Specify your pod's version for example pod 'RealmSwift', '~> 5.3.5'
or uncomment # platform :ios, '9.0' in your Podfile
I faced this issue on Xcode 14. Add this on podfile bottom.
post_install do |installer|
installer.pods_project.targets.each do |target|
target.build_configurations.each do |config|
# some older pods don't support some architectures, anything over iOS 11 resolves that
config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '12.0'
end
end
end
In Xcode 8 I'm having trouble importing any Swift 2.3 or 3 framework that was added with Cocoapods into my project.
There is a public umbrella.h file, but for some reason Xcode can't find the framework when I try to #import it.
As an example, create any Objective-C project, use the following Podfile, pod install, and then try the #import. It asks me to update the code to swift 2.3 or 3 even if that code is already Swift 2.3 or Swift 3 code. I've cleaned and tried to rebuild as well.
platform :ios, '8.0'
use_frameworks!
target 'testingFrameworks' do
pod 'SwiftyJSON'
end
Did I miss a step?
I used socketIO and was having the same problem. My solution to this is:
Close project.
Delete pod files, delivered files, pod framework, workspace file (clean up project)
pod install
Reopen workspace, upgrade swift syntax if xcode ask for, build a few times.
You might need to fix something for the new swift.
I configured RealmSwift 1.0.0 Latest Using Docs into the Xcode project. After installation i created a class file and getting module error - like: No such module 'RealmSwift' in class file.
1.
2.
3.
4.
After adding the Realm Plugin, i created a class and get the module error below.
Please help me to solve this error.
A very important sanity check: if you run into this and you're using Cocoapods, please make sure you open the .xcworkspace and not the .xcodeproj file!
Follow below steps, it may be useful for you.
Go To: Product > Schemes > New Scheme...
Select: RealmSwift and click OK
Build the RealmSwift target (cmd + b)
It looks like you've added the path to RealmSwift.framework to your framework search paths. The Realm Swift installation instructions say to add the parent path of RealmSwift.framework (i.e., the containing directory) to your framework search paths.
I had the same problem like you.
I resolved it by add the following code into pod file.
source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '10.0'
Follow below instructions:
Clean from Xcode (Shift+Cmd+K)
Delete the Derived Data directory (~/Library/Developer/Xcode/DerivedData)
Build the project (Cmd+B)
After "pod install" or "pod update" fix it
else
try this:
sudo gem install cocoapods-deintegrate cocoapods-clean
pod deintegrate
pod cache clean --all
rm Podfile
pod "deinitialize" to fix that issues.
I've struggled with this problem as well for 2 hours; I tried several things, like cleaning, uninstalling and reinstalling the Realm pod, changing the Podfile, and so on.
Nothing worked until I restarted the computer.
I use Xcode 8.3.3 and Xcode 9.2 Beta, Swift 3, High Sierra MacOS.
After "pod install" restart Xcode
You can add Run script file for your project.
"${SRCROOT}/Pods/Target Support Files/Pods-Realm Database/Pods-Realm Database-frameworks.sh"
For me there first was an error like 'could not build Objective-C module 'RealmSwift'' which I could fix by deleting the Derived Data Folder, Pods Folder, Podfile.lock and the .xcworkspace and after that there was the error saying 'No such module 'RealmSwift'' which only disappeared when I first tried to build the project. Now everything works fine for me!
In my case i tried other suggested solutions and it didn't work for me but this replacement fixed problem and the error have gone
Try use
pod 'RealmSwift'
instead
pod 'Realm', '~> 10.1'
Let me tell you how I get that error and how I solved it.
I am using Carthage in my project, but I am new team member, so I did git clone the project. But I opened the project before run cathage upload command. Although I ran the cathage command, I got that error.
I could fix it doing the next:
Go to the project file.
In build phaces -> run script -> Input file.
Add $(SRCROOT)/Carthage/Build/iOS/Realm.framework and
$(SRCROOT)/Carthage/Build/iOS/RealmSwift.framework
I do not know why it is not always automatically linked.
In my case, setting project format to current Xcode version in pod target helped:
I am starting a project by creating a blank Single-View app for Swift. Using Cocoapods, I am adding Alamofire as follows:
platform :ios, "8.0"
use_frameworks!
target 'TestGauge' do
pod 'Alamofire', '~> 3.0'
end
target 'TestGaugeTests' do
end
Then, in Terminal I run pod install
When returning to XCode, the project fails to build with 1000+ errors generated from Alamofire.
I am running XCode from the workspace file and NOT the project file.
XCode version 6.4
Has anyone had this behavior, or can anyone offer a solution? Have I missed a critical step?
Thanks!
Alamofire 3.0 is written in Swift 2.0. Xcode 6.4 does not support Swift 2.0. Change Alamofire version or update your Xcode.
Every time I open my XCode project in XCode 7.1.1, I get the error: "No such module Parse" wherever I import Parse.
However, I have the Parse framework correctly added in my Build Phases, and the only way to fix this is by deleting the Parse framework listed in my Build Phases and re-adding it like I did the first time.
I have to do this every time I reopen an XCode project, and it's extremely annoying, but able to be worked around. Does anyone have any permanent fixes for this?
Thank you!
I suggest using CocoaPods to install Parse for Swift using the following Podfile:
platform :ios, "8.0"
use_frameworks!
pod 'Parse'
Parse can then be installed with
pod install