I used date in filePattern, but the date log4j create is not right.
Today is 2015-11-23, but log4j create a file directory named 2015-12.
my log4j2 version is 2.4.1.
here is a snapshot
below is my log4j2 configuration.
<RollingFile name="RollingFile" fileName="logs/executor.log" append="true"
filePattern="logs/$${date:yyyy-MM}/executor-%d{yyyy--MM--dd}-%i.log.gz">
<PatternLayout>
<Pattern>%t %d{yyyy-MM-dd HH:mm:ss} %c %p -%m%n</Pattern>
</PatternLayout>
<Policies>
<TimeBasedTriggeringPolicy interval="24" modulate="true"/>
<SizeBasedTriggeringPolicy size="1MB"/>
</Policies>
</RollingFile>
This issue is due to your intervals. Its effectively setting up the initial rollover file to be when the end of the next rollover would be. The documentation on the RollingFileAppender for the TimeBasedTriggeringPolicy says: "How often a rollover should occur based on the most specific time unit in the date pattern." Since your most specific time unit is dd, or day of month, its setting it up for 24 days from 2015-11-23, or sometime in month 12, when it would rollover.
What you probably want is an interval of 1. This should rollover each file day and then once a month spills over, it would into the next subfolder because 1 day was triggered.
I've tested this with your pattern, but use a MM at the end and and a interval="24." Modulated, it rolled into 12/2016, but not modulated, it rolled over saying 11/2017! I can't say why and per my comment above, there have been issues with this feature reported.
Have same problem.
<RollingFile name="DailyFileAppender" fileName="logs/server.log"
filePattern="logs/server - %d{yyyy-MM-dd} - %i.log">
<PatternLayout>
<pattern>%d{yyyy-MM-dd HH:mm:ss,SSS}- %c{1}: %m%n</pattern>
</PatternLayout>
<Policies>
<TimeBasedTriggeringPolicy interval="5"/>
<SizeBasedTriggeringPolicy size="10 KB"/>
</Policies>
<DefaultRolloverStrategy max="4"/>
</RollingFile>
The output file's data is wrong. example the date is "2015-12-01" the output date is "2015-12-05"
Related
Helllo everyone,
we have log4j from 1.2.8 to log4j2.11, and observed half daily logs files are not generating as expected.Only i can see only AM log files are generating.
<RollingFile name="file" fileName="testAMPM.log" filePattern="testAMPM.log-%d{yyyy-MM-dd-a}" >
<PatternLayout pattern="%d %5p %-120m [%t - %c:%L] %n"/>
<Policies>
<TimeBasedTriggeringPolicy interval="1" modulate="true" />
</Policies>
Will not mark this as duplicate because this, question here did not get answered. The answer to another duplicate question does have an example though, so please try this here first:
<RollingFile name="fileAppender" filename ="${logName} append="true" FilePattern="${logName}.$$d{yyyy-MM-dd-a}">
<CronTriggeringPolicy schedule="0 0 0,12 * * ?" />
</RollingFile>
A comment in the first linked duplicate also suggests to check out Cron Triggering Policy, which could provide a better solution to your requirement than a TimeBasedTriggeringPolicy:
Just try it out.
I used the following Log4j2 configuration to test the behavior. It rotates the file every 10 seconds and should keep only 3 files. However no file is deleted. What am I missing?
Please don't suggest to use the delete action.
<RollingFile name="File" fileName="/var/log/mylog.log" filePattern="/var/log/mylog-%d{yyyy-MM-dd-HH-mm-ss}.log.gz">
<PatternLayout>
<Pattern>${LOG_PATTERN}</Pattern>
</PatternLayout>
<Policies>
<TimeBasedTriggeringPolicy interval="10"/>
</Policies>
<DefaultRolloverStrategy max="3"/>
</RollingFile>
I realise this is an old question, but I had the same problem.
I also realise the OP said "Please don't suggest to use the delete action" so this may mean there are version restrictions on using Delete.
However I found this feature request which sheds some light on this behaviour - a comment there indicates.
DefaultRolloverStrategy max attribute only applies if you have a %i in
the file pattern.
The manual, under "Default Rollover Strategy", indicates
The default rollover strategy accepts both a date/time pattern and an
integer from the filePattern attribute specified on the
RollingFileAppender itself
and
max : integer : "The maximum value of the counter. Once this values is
reached older archives will be deleted on subsequent rollovers. The
default value is 7."
A bit a mix of "counter" and "integer" - but think (now) that it means this only applies to "%i" pattern. If the manual used "integer counter" it may be clearer.
A solution I got working (using 2.10.0 and days rather than seconds) using Delete (sorry OP) was:
<RollingFile name="MyLog" fileName="${sys:dataDir}/mylog.log" append="true">
<FilePattern>./mylog-%d{yyyy-MM-dd}.log.zip</FilePattern>
<PatternLayout pattern="%d{yyyy-MM-dd HH:mm:ss.SSS} [%t] %-5level - %msg %logger{36}%n"/>
<Policies>
<TimeBasedTriggeringPolicy interval="1" modulate="true" />
</Policies>
<DefaultRolloverStrategy>
<Delete basePath="${sys:dataDir}" maxDepth="1">
<IfFileName glob="mylog-*.log.zip" />
<IfLastModified age="7d" />
</Delete>
</DefaultRolloverStrategy>
</RollingFile >
Hello I am using Log4j2 for my logging and I am little confused as to how I can log message to a different file based on the message prefix.
For example, currently all messages are logged in a single logs folder.
A set of my messages look like this:
'com.project.latency: ProjectName=[MooPointProject].......'
Some of my other log messages are of the format:
'com.project.latency: ProjectName=[DataPlaneProject].......'
I want to log the messages which contain the MooPointProject in a specific file and one containing DataPlaneProject in a separate log file.
Is there a specific way I can do that other than changing the logging level itself?
Set up several appenders one for each project name. For example:
<RollingFile name="RollingFile" fileName="logs/MooPointProject.log"
filePattern="logs/app-%d{MM-dd-yyyy}.log.gz">
<RegexFilter regex=".*MooPointProject.*" onMatch="ACCEPT" onMismatch="DENY"/>
<PatternLayout>
<pattern>%d %p %c{1.} [%t] %m%n</pattern>
</PatternLayout>
<TimeBasedTriggeringPolicy />
</RollingFile>
and
<RollingFile name="RollingFile" fileName="logs/DataPlaneProject.log"
filePattern="logs/app-%d{MM-dd-yyyy}.log.gz">
<RegexFilter regex=".*DataPlaneProject.*" onMatch="ACCEPT" onMismatch="DENY"/>
<PatternLayout>
<pattern>%d %p %c{1.} [%t] %m%n</pattern>
</PatternLayout>
<TimeBasedTriggeringPolicy />
</RollingFile>
Then assign both the appenders to your logger(s). Since your RegexpFilter accepts only a project-spcific lines you will get them to the appropriate files separately.
P.S. - Find the detail on other types of filters here.
I want to generate half-daily log files through log4j2 configuration. I have given :
<RollingFile name="fileAppender" filename ="${logName} append="true"
FilePattern="${logName}. %d{yyyy-MM-dd-a}">
And also defined:
<Policies>
<TimeBasedTriggeringPolicy interval="1"
Module="true"/>
But i am getting only AM log in this way though i want it to be something :
a.log.2016-03-23-AM
b.log.2016-03-23-PM
Can somebody help me out in the same?
You can use the CronTriggeringPolicy for this. I borrowed the expression from the answer at Cron Expression (Quartz) for a program to run every midnight at 12 am for the actual expression to use.
<RollingFile name="fileAppender" filename ="${logName} append="true" FilePattern="${logName}.$$d{yyyy-MM-dd-a}">
<CronTriggeringPolicy schedule="0 0 0,12 * * ?" />
</RollingFile>
I have a RollingFile appender
<RollingFile name="xxx" fileName="${sys:catalina.base}/logs/request.log" filePattern="${sys:catalina.base}/logs/request.log.%d{yyyy-MM-dd}.%i.gz">
<PatternLayout>
<Pattern>%d{yyyy-MM-dd HH:mm:ss.SSS} %msg%n</Pattern>
</PatternLayout>
<Policies>
<OnStartupTriggeringPolicy />
<TimeBasedTriggeringPolicy />
<SizeBasedTriggeringPolicy size="5 MB"/>
</Policies>
<MarkerFilter marker="REQUEST_MARKER" onMatch="ACCEPT" onMismatch="DENY"/>
</RollingFile>
Which works perfect but this weekend at 14.02 and 15.02. the logger did not log anything after midnight between 00:00:00 and 03:39:17 and at 15.02. between 00:00:00 and 03:18:59.
Can anyone imagine why?
Btw: the application was okay, as I received data in other logfiles.
Regards
S.
The title of your question is about not rolling over but your question makes it sound like you are asking why no logs were written during certain times, so I am not sure if I am answering your question.
The RollingFileAppender only checks for a rollover when it writes events. If no log event occurs between midnight and 3:18 am then the file will not roll over until 3:18 am.