New user to Quart.net
Using the sample configuration file contained in the download.
<add key="quartz.jobStore.dataSource" value="default"/>
<add key="quartz.datasource.default.connectionString" value="Data Source=BRN0VMMSDB77;Initial Catalog=dbQuartz;Integrated Security=True"
providerName="System.Data.SqlClient"/>
<add key="quartz.datasource.default.provider" value="SqlServer-20"/>
In my web page I am getting the following error when I try to run a quartz job.
Any help is greatly appreciated.
thx in advance.
Try changing this
quartz.datasource.default.connectionString
to this:
quartz.dataSource.default.connectionString
(the only change is the S)
Related
I recently began integrating UmbracoFileSystemProviders.Azure from https://github.com/JimBobSquarePants/UmbracoFileSystemProviders.Azure and am able to do the following on my local machine & a dev environment...
I can log into Umbraco (v7.3.1/a1.0.5780.28249), upload an image &
have it appear in the appropriate container on our Azure blob
storage
I can view images at their corresponding azure address (i.e. "https://azureaccount.blob.core.windows.net/media-stage/9999/file-name.png")
I can view images within Umbraco's backend (i.e. "http://localhost:99999/umbraco/backoffice/UmbracoApi/Images/GetBigThumbnail?originalImagePath=%2Fmedia%2F9999%2Ffile-name.png")
However, I get a 404 error when I try to view images on the front-end (i.e. "http://www.sitedomain.com/media/9999/file-name.png"). I think this is because the site is still trying to find the front-end image within the site rather than in Azure (based on the fact that creating/removing a matching directory & image at the appropriate relative location causes the image to load or yield a 404). This issue is consistent across multiple browsers & image uploads (whether I upload through Umbraco or through Microsoft Azure Storage Explorer). Does anyone have any ideas how I might be able to resolve it?
The following are all of the files/code snippets I'm using that I think might be relevant to the issue (with client-specific data swapped out in favor of generic data for security)...
Relevant section of Config/FileSystemProviders.config:
<Provider alias="media" type="Our.Umbraco.FileSystemProviders.Azure.AzureBlobFileSystem, Our.Umbraco.FileSystemProviders.Azure">
<Parameters>
<add key="alias" value="media"/>
</Parameters>
</Provider>
Relevant sections of Web.config:
<appSettings>
<!--other data here-->
<add key="AzureBlobFileSystem.ConnectionString:media" value="DefaultEndpointsProtocol=https;AccountName=azureaccount;AccountKey=aBcDeFgHiJkLmNoPqRsTuVwXyZ==;EndpointSuffix=core.windows.net" />
<add key="AzureBlobFileSystem.ContainerName:media" value="media-stage" />
<add key="AzureBlobFileSystem.RootUrl:media" value="https://azureaccount.blob.core.windows.net/" />
<add key="AzureBlobFileSystem.MaxDays:media" value="365" />
<add key="AzureBlobFileSystem.UseDefaultRoute:media" value="true" />
<add key="AzureBlobFileSystem.UsePrivateContainer:media" value="false" />
<!--other data here-->
</appSettings>
<location path="Media">
<system.webServer>
<handlers>
<remove name="StaticFileHandler" />
<add name="StaticFileHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.StaticFileHandler" />
</handlers>
</system.webServer>
</location>
A few additional notes for the troubleshooting process...
I've seen a few similar issues posted on GitHub (& closed out), but I believe my situation to be unique because...
I am not seeing configuration errors when I view the project or
umbraco backend (as with
https://github.com/JimBobSquarePants/UmbracoFileSystemProviders.Azure/issues/103)
My Umbraco is version 7.3.1 (rather than 7.5+, like https://github.com/JimBobSquarePants/UmbracoFileSystemProviders.Azure/issues/57)
Commenting out the image processor in the web config does not solve the issue (as with
https://github.com/JimBobSquarePants/UmbracoFileSystemProviders.Azure/issues/27)
I've also tried forgoing the web.config approach & using the following within Config/FileSystemProviders.config (again, client-specific data has been replaced with generalized stuff), but still had the same problem...
<Provider alias="media" type="Our.Umbraco.FileSystemProviders.Azure.AzureBlobFileSystem, Our.Umbraco.FileSystemProviders.Azure">
<Parameters>
<add key="containerName" value="media-stage" />
<add key="rootUrl" value="https://azureaccount.blob.core.windows.net/" />
<add key="connectionString" value="DefaultEndpointsProtocol=https;AccountName=azureaccount;AccountKey=aBcDeFgHiJkLmNoPqRsTuVwXyZ==;EndpointSuffix=core.windows.net"/>
<add key="maxDays" value="365" />
<add key="useDefaultRoute" value="true" />
<add key="usePrivateContainer" value="false" />
</Parameters>
Thanks in advance for any assistance!
I found that I needed to disable the Virtual Path Provider otherwise the URLs generated were always relative (of the form /media/nnnnn/filename.jpg). Hence I added this to web.config AppSettings
<add key="AzureBlobFileSystem.DisableVirtualPathProvider" value="true" />
see https://github.com/JimBobSquarePants/UmbracoFileSystemProviders.Azure.
This was with Umbraco version 7.7.7.
I installed Elmah via nuget. It usually works will if I use an .edmx. However I am using a code-first DbContext. Elmah seems to be sending the emails but it doesn't log to the database.
Any idea what could be going wrong?
It will work just fine with code first. You do not need the ELMAH_ERROR table as a part of your context. As long as you ran the elmah SQL in your database and setup your config correctly it WILL log to the database. Please share your config code, it should look something like this (a small portion of the config):
<elmah>
<errorLog type="Elmah.SqlErrorLog, Elmah" connectionStringName="elmah-sqlserver" applicationName="YOUR_APPLICATION" />
<security allowRemoteAccess="yes" />
</elmah>
<connectionStrings>
<add name="elmah-sqlserver" connectionString="Data Source=YOUR_SERVER;User ID=YOUR_USER_ID;Password=YOUR_PASSWORD;Initial Catalog=YOUR_CATALOG;" providerName="System.Data.SqlClient" />
</connectionStrings>
Please excuse me is this is a noob question. I have a MVC project with a number of EF Database first models. When I created them some were created with new connection strings.
I have tried to clean up the project web.config file and commented out the duplicated connection strings,
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDb)\MSSQLLocalDB;AttachDbFilename=........... />
<add name="DB_A09819_ProductsEntities" connectionString="metadata=........... />
<add name="DB_A09819_PowerDB001Entities" connectionString="metadata=........... />
<!--
<add name="DB_A09819_ProductsEntities_IntranetDownload" connectionString="metadata........... />
<add name="DB_A09819_ProductsPricing" connectionString="metadata=........... />
<add name="DB_A09819_ProductsProjectProposal" connectionString="metadata=.......... />
<add name="DB_A09819_ProductsProposalSystem" connectionString="metadata=........... />
-->
</connectionStrings>
I had thought that MVC would have picked up on the changes and raised errors, however with these changes the project builds and runs on development server.
When I try to add a controller I now get an error that the
---------------------------
Microsoft Visual Studio
---------------------------
Error
There was an error running the selected code generator:
'Unable to retrieve metadata for 'web...............t'.
No connection string named 'DB_A09819_..........'
could be found in the application config file.'
---------------------------
OK
---------------------------
I would like to change the associations and fix the connection string to have a single connection to each of the databases.
There are a number of posts where the solution is to add a connection string, I am trying to clean up my code and remove duplicate connection strings.
How do I change the association to the connection string in the Model and the controllers to ensure that it will run when deployed ?
In VS 2012 update 1,
I am getting a "Page Inspector Runtime must be registred in root web.config" Warning, when running the page inspector.
Can anyone assist me in what I have to put in the root web.config to fix this . Or some other solution.
Thanks
I realize this is an old question, but since it comes up on a search for the same issue which is still relevant to VS 2019, I thought I'd provide the actual answer:
The error mentioned here is referring to the registration of a file that is in GAC that needs to happen in the machine-level web.config. Not, as the other answers mentioned, in the project's web.config file.
The machine-level web.config file is located (for .net 4+, which I'm assuming is all anyone is using right now) at c:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\web.config
And here is what you'll need to add:
<configuration>
..
<system.web>
...
<compilation>
<assemblies>
...
<add assembly="Microsoft.VisualStudio.Web.PageInspector.Loader, Version=1.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</compilation>
</system.web>
</configuration>
There's obviously a lot more in your machine-level web.config file - I'm just showing it as above so you see the hierarchy it needs to be in.
Normally this is added by the VS installer. But there are circumstances in which the installer fails to add it or even removes it..
To generate the metadata that is required for some of its features, Page Inspector must instrument the project by adding the following setting to the element in the Web.config file. You can use Page Inspector even if this setting is disabled or it is missing. However, some features like the source selection mapping will not work under these conditions.
Web.config
<add key="VisualStudioDesignTime:Enabled" value="true" />
Add to 'web.config' the key/value suggested by #Vicky_Raj_Sharma above and the "PageInspector:ServerCodeMappingSupport" under , like this:
<appSettings>
<add key="webpages:Version" value="2.0.0.0" />
<add key="webpages:Enabled" value="false" />
<add key="PreserveLoginUrl" value="true" />
<add key="ClientValidationEnabled" value="true" />
<add key="UnobtrusiveJavaScriptEnabled" value="true" />
<!-- Keys above came with Hot Towel SPA template for VS2012 -->
<!-- Keys below where manually added -->
<add key="VisualStudioDesignTime:Enabled" value="true" />
<add key="PageInspector:ServerCodeMappingSupport" value="Enabled"/>
</appSettings>
When browsing the page (Browse with menu) from within VS it will show the page in your preferred browser.
Still haven´t figured out how to run this directly on IIS8 though...
I am trying to use SimpleMembership in my MVC 3 application. However I get the following error:
System.ArgumentException was unhandled
by user code. Unable to find the
requested .Net Framework Data
Provider. It may not be installed.
I'm using EF and the framework is obviously there since my app works perfect without the SimpleMembership API
Here is the Set Up in the Web config file:
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
<add name="SeniorProjectModelContainer" connectionString="metadata=res://*/Models.SeniorProjectModel.csdl|res://*/Models.SeniorProjectModel.ssdl|res://*/Models.SeniorProjectModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=GOGOTOPPY;Initial Catalog=SPMT;Integrated Security=True;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient" />
</connectionStrings>
And heres how it looks in the in the Membership file in the App_Start folder:
WebSecurity.InitializeDatabaseConnection(connectionStringName: "SeniorProjectModelContainer", userTableName: "Users", userIdColumn: "UserId", userNameColumn: "UserName", autoCreateTables: true);
Any help would be greatly appreciated!
Update:
The quick work around was to take the metadata part out of the connection string and change the provider name to the SqlClient so it looks similar to this:
<connectionStrings>
<add name="Membership" connectionString="Data Source=serverName;Database=datebaseName;User ID=idName;Password=password;Trusted_Connection=False;Encrypt=True;" providerName="System.Data.SqlClient" />
</connectionStrings>
Is there any downside of the connection string looking like this?
Not sure how you installed simplemembership but try doing it the nuget way for example,
http://www.nuget.org/List/Packages/SimpleMembership.Mvc3