I have a requirement in which I have to map the below url
/amer/us/en/ = Home controller
/amer/us/en/login/index = Home controller
/amer/us/en/confirmation = Confirmation controller
along with the regular default action.
Eg if user goes to
http:\\test.com --> http://test/home/index
http:\\test.com/amer/us/en/login/index --> http://test/home/index
http:\\test.com/amer/us/en/ --> http://test/home/index
I was looking into attribute routing and so I added the below code in HomeController
[RoutePrefix("amer/us/en/")]
[Route("{action=index}")]
public class HomeController : Controller
{
}
and I am getting this error
The route prefix 'amer/us/en/' on the controller named 'Home' cannot begin or end with a forward slash and also the default routing is not working now so http://test.com is not loading anything. Below is my default RouteConfig class.
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapMvcAttributeRoutes();
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
Very new to MVC. Can someone tell me what I am doing wrong here.
Routing in MVC works either by defining your routes in the RouteConfig class or by attribute routing (or you can use Areas). Routing with RouteConfig works with the order you define the routes with. When a request comes, MVC will try your routes from top to bottom and execute the first one that it can match with the requested url. So the routing need in your example can be achieved by:
routes.MapRoute(
name: "RootLogin",
url: "amer/us/en/login/index/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
routes.MapRoute(
name: "DefaultAmer",
url: "amer/us/en/{controller}/{action}{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
this will map login as a special route and all the other /amer/us/en/ routes will go to whatever controller comes after and whatever action of it. The last route, if the request does not start with /amer/us/en will perform the default behavior.
Looks like, however, you want to define /amer/us/en/ as an Area, so you might want to take a look into that as well.
Related
I'm trying to learn ASP.NET MVC and have a few questions about routing.
Print is a controller, with a Show action, that takes a parameter and returns it back as string.
Consider the code
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional });
routes.MapRoute(
name: "Print",
url: "Print/{action}/{id}",
defaults: new { controller = "Print", action = "Show", id = UrlParameter.Optional });
}
Why do I get a 404 error when I try host:xxxxx/Print/xxx...? Shouldn't it take me to the Show action?
Also if I set url:Print, and try host:xxxxx/Print I get the same error. It should take me to the Show action.
Similarly if I set url:Print/{action}/{id} and try host:xxxxx/Print/Show it gives the same error, even though the parameter is optional, and should return blank?
But if I interchange the two routes such that the Print route is first in precedence and Home/Index in second, I do not get any errors in any cases? host:xxxxx/Print shows blank, host:xxxxx/Print/Show shows blank and host:xxxxx/Print/Show/xxx... returns some value.
Why do I get errors if I set it as the second route?
Change the routes register order to:
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Print",
url: "Print/{action}/{id}",
defaults: new { controller = "Print", action = "Show", id = UrlParameter.Optional });
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
The routes in the RegisterRoutes() are analyzed in order they are added to the routes. The Default route pattern is universal, therefore the second doesn't work. The MVC trying to find the Show action in the Home controller and does not finding it. Therefore it report the 404 error.
If look at the RouteCollection declaration it is inherited from IList<T>. So, the routes analyzed in order they added to the routes table.
Any your routes should be added before the Default route.
I Am not understanding this concept, so after doing a manual and read a few articles I decide to ask you all.
I want to change, just for testing, from:
localhost/Home/List
To:
localhost/Custom/List
So my:
RouteConfig.cs
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
routes.MapRoute("Custom", "Custom/List/",
new
{
Controller = "Home",
Action = "List"
});
}
But is is not working. The first url still working but the second one is not finding anything.
Thanks
Routes are matched in order and your Default route matches any url with between zero to 3 segments, so ../Custom/List calls the List() method of CustomController.
You need to change the order of your routes so that the Custom is before the DefaultRoute. ../Custom/List will then match that route first and go to the List() method of HomeController
I am using MVC 4 and need to remove /Home/ folder from address bar...
Eg:
http://localhost:61700/Home/AboutUs
Need to be changed as...
http://localhost:61700/AboutUs
I did that by changing the default controller in "RouteConfig.cs"
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
//url: "{controller}/{action}/{id}",
url: "{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
}
The above code is working as expected. I do have another folders as
brand, admin etc... here I want to show the url as
http://localhost:61700/brand/productInfo ... But I am getting server
error here as Server Error in '/' Application.
Can somebody suggest me, where am I doing wrong?
Screenshots here for more info:
This is your current RouteConfig.cs configuration:
routes.MapRoute(
name: "Default",
url: "{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
You're telling Asp.net, when a request arrives, assume the first parameter as the action and the second parameter as the id. Right now you're not telling Asp.net to parse any parameter as the controller. Because of this it uses the default value (given as the third parameter of the MapRoute method) which is in this case Home.
In that case when parsing the request http://localhost:61700/AboutUs the values end up being:
controller: Home (it uses the default controller)
action: AboutUs (from the first parameter)
id: null (this doesn't matter right now)
When parsing the request http://localhost:61700/brand/productInfo the values end up being:
controller: Home (it uses the default controller because you haven't specified where to get the controller name from)
action: Brand (from the first parameter)
id: "productInfo"
The error you're getting is because there isn't a Brand action method in HomeController.cs with a parameter of type string named id.
Asp.net processes incoming requests by trying to match with the routes configured and it uses the first route that matches.
There are several ways to achieve what you want, which include but are not limited to:
Manually mapping every action in your HomeController.cs (choosing this method will depend on the amount of actions in your HomeController). This would look like:
routes.MapRoute(
name: "AboutUs",
url: "AboutUs",
defaults: new { controller = "Home", action = "AboutUs" }
);
routes.MapRoute(
name: "ContactUs",
url: "ContactUs",
defaults: new {controller = "Home", action = "ContactUs" }
);
// etc...
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
Note how the default route is the last one, this is important because it is less specific than the others and if put before would match the request and want to look for an AboutUsController.
You could use route constraints. This would look like:
route.MapRoute(
name: "HomeControllerRoutes",
url: "{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional },
constraints: new { action = "AboutUs|ContactUs|etc..." } //Here you would put all your action methods from home controller that you want to accces as /{action}
);
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
If you want to read more about route constraints, I found this article that explains that the constrains parameter can receive a regular expression (I suggest you modify the regular expression above to make it case insensitive) or an IRouteConstraint.
Update:
I just read your comment about having 160+ actions in your HomeController that would make your regular expression in my second suggestion quite long. In that case the other options you have could be:
Using a regular expression that rejects all other controller names, but that would violate the open/closed principle (OCP) and every time you add another controller you would have to add it to the regular expression.
Create the regular expression from the metadata of you HomeController class. This would look like
string.Join("|", typeof(HomeController).GetMethods().Select(info => info.Name))
Or you could take a look at IRouteConstraint to see if you could figure out a more elegant solution.
I have no experience with IRouteConstraint
Add this in your route.config / glibal.asax and don't change your default routes. Add following above it.
routes.MapRoute(
name: "About",
url: "AboutUs",
defaults: new { controller = "Home", action = "AboutUs" }
);
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
I have 160+ views in the home controller
You don't mention how many views you have in the other controllers, nor how complicated they need to be.
Rather than keep the default controller/action and add routes for every view in home, you can add a route for each controller and then have your default route without a controller path.
While this means you do need a route for every controller, it's better than one for every view.
routes.MapRoute(
"AdminRoute",
"Admin/{action}/{id}",
new { controller = "Admin", action = "Index", id = UrlParameter.Optional });
routes.MapRoute(
"BrandRoute",
"Brand/{action}/{id}",
new { controller = "Brand", action = "Index", id = UrlParameter.Optional });
routes.MapRoute(
"HomeRoute",
"{action}/{id}",
new { controller = "Home", action = "Index", id = UrlParameter.Optional });
routes.MapRoute(
"DefaultRoute",
"{controller}/{action}/{id}",
new { controller = "Home", action = "Index", id = UrlParameter.Optional });
(afaicr you don't need the default route as all your views would be covered by the other 3 routes)
Note the path for 'HomeRoute' doesn't have a controller part.
As long as they are in this order any url with /Admin/ or /Brand/ will be picked up first.
I'm working on an ASP.NET MVC web application. By default, browsing to the root of a directory seems to call the controller's Index() method. Is there way to change which method is called by default here? I know I could probably name the method I want to call "Index" and it would likely work, but I'd like to know if there's a way to point the directory root to a method that I choose.
For example: mysite.com/MyDirectory/ will call Index(), which is effectively browsing to mysite.com/MyDirectory/Index. I'd like to change it so that mysite.com/MyDirectory/ calls Details, (or "browses" to mysite.com/MyDirectory/Details).
Just change the action in the default route. Something like this:
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Home", action = "Details", id = UrlParameter.Optional } // Parameter defaults
);
You could specify the behavior in your routes. If you are using the latest version of MVC, that would be in your \App_Start\RouteConfig.cs
You would have something like:
routes.MapRoute(
name: "MyDirectory",
url: "MyDirectory",
defaults: new { controller = "MyDirectory", action = "Details" });
You would place this before your default route, as your route table acts kind of like a switch statement matching on the first route that it finds.
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "MyDirectory",
url: "MyDirectory",
defaults: new { controller = "MyDirectory", action = "Details" });
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
I have a controller with an index action.
public ActionResult Index(int id = 0)
{
return view();
}
I wish to pass id into the index action, however it doesnt appear to work in the same way as the details action.
e.g. if I want to pass id 4 into the index action, I have to visit url:
http://localhost:8765/ControllerName/?id=4
With the details Action... I can do this.
http://localhost:8765/ControllerName/Details/4
What I want to do with Index is something like...
http://localhost:8765/ControllerName/4
When I visit this url, I get an error:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /fix/1
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.17929
Is this possible? How can I get MVC to automatically treat the index action in the same way as the details one?
Thanks
UPDATE - MY CURRENT ROUTES CONFIG
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
}
UPDATE NEW RouteConfig Class still doesn't work when I visit localhost:1234/Fix/3
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
routes.MapRoute(
name: "FixIndexWithParam",
url: "Fix/{id}",
defaults: new { controller = "Fix", action = "Index", id = UrlParameter.Optional });
}
}
Update It's worth pointing out, /ControllerName/Index/4 should work with the default route.
With the default route there, it expects the second parameter to be the controller name.
So with the Default Route /ControllerName/4 is being interpereted as ControllerNameController Action 4, which of course does not exist.
If you add
routes.MapRoute(
name: "IndexWithParam",
url: "{controller}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional });
before the default one it would allow
/Home/4 to be routed to HomeController action Index with id=4
I have't tested this, it may conflict with the default. You may need to specify the controller explicitly in the route, ie:
routes.MapRoute(
name: "HomeIndexWithParam",
url: "Home/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional });
(Obviously, replace Home with whatever controller you're actually wanting to route to)