I have a grain that sets up a reminder in OnActivate method.
The reminder then periodically does some action and no further communication is needed from outside the silo.
Is it possible to get a GrainProvider during host start and activate the grain within the Host itself?
Or do I need a client to initiate the first activation?
You can call the grain in Application Bootstrapping within a Silo, which is called on silo startup. Calling the gets its OnActicate called. Some more documentation at
Bootstrap provider.
It would be possible to insert the data straight to the persistent storage (via some side-channel) too, but that's a somewhat of an unsupport scenario (at the moment).
Related
I have a web app that I built. It communicates with the Salesforce API. I have users and administrators. All connections to the API use the same credentials.
I am concerned that my API connection is going to be created multiple times because each admin that is logged in has their own instance of the connection.
If I hold the API connection in a constant, do all other sessions/users have access to that exact connection or do I have to connect for each user, or how can I share one single API connection for ALL users?
A stateless API will never have a persistent connection, so there's no use in holding these in constants. Every HTTP request is a separate TCP connection by definition.
It's only things like database or Websocket connections that persist and if you need to manage those you need a connection pool, not a simple constant. If the connection ever fails it needs to be replaced, and if more than one thread potentially requires it you have to handle acquisition and locking properly.
Create your API connectors as necessary. Unless you have a measurable performance problem don't worry about it.
A Ruby constant is like a variable, except that its value is supposed to remain constant for the duration of the program. The Ruby interpreter does not actually enforce the constancy of constants, but it does issue a warning if a program changes the value of a constant.
Reference: http://rubylearning.com/satishtalim/ruby_constants.html
My goal is to send an email out every 5 min from my application even if there isn't a browser open to the application.
I'm using FluentScheduler to manage the tasks; which works up until the server decides to kill the application from inactivity.
My big constraints are:
I can't touch the server. It is how it is and I have to work around it.
I can't rely on a client refreshing a browser or anything else along the lines of using client side scripts.
I can't use any scheduler that uses a database.
What I have been focusing on is trying to create an artificial postback.
Note: The server is load balanced, so a solution could use that
Is there any way that I can keep my application from getting killed by the server?
You could use a monitoring service like https://www.pingdom.com/ to ping the server at regular intervals. Just make sure it hits an endpoint that invokes .NET code and not a static resource.
I have an xmpp/ejabberdb app that uses an external service to provide eventing features, but when this service becomes unavailable, I want to disconnect/logout all of my clients. Is this possible? How?
I got it working the way I needed. In fact, I didn't find any simple way to make my own server logout all connected users given some kind of situation, so I dug into ejabberd's code and figured out a way to do it myself.
In ejabberd_c2s.erl module, when a client logs out or it's socket is dropped for some reason, the FSM is terminated, doing all necessary clean up to maintain ejabberd's consistency.
What I had to do was just create an exported function shutdown/1 in this module that calls gen_fsm:send_all_state_event/2 sending a signal for it to terminate.
As for each connection there's one c2s process, I need to call this function for each user.
---UPDATING---
Actually there's no need to create this shutdown function, as ejabber_c2s already has the ability to process 'closed' signal, which does the same thing. So, instead of creating the shutdown function, simply doing ge_fsm:send_event(C2SPid, closed) might be enough.
---UPDATING---
To discover the user's c2s process PID I just use ejabberd_sm:get_session_pid/1 or ejabberd_sm:dirty_get_sessions_list/0 (for all sessions).
This worked fine for me, but if anyone has a better idea, please add here.
Thanks
I don't know the ejabberd specifics, but you could write a custom XMPP component which polls the external service (or listens for presence events, if it's another XMPP component), then logs out users when the service becomes unavailable.
I am to build a web application which will accept different events from external sources and present them quickly to the user for further actions. I want to use Ruby on Rails for the web application. This project is a internal development project. I would prefer simple and easy to use solutions for rapid development over high reliable and complex systems.
What it should do
The user has the web application opened in his browser. Now an phone call comes is. The phone call is registered by a PBX monitoring daemon. In this case via the Asterisk Manager Interface. The daemon sends the available information (remote extension, local extension, call direction, channel status, start time, end time) somehow to the web application. Next the user receives a notified about the phone call event. The user now can work with this. For example by entering a summary or by matching the call to a customer profile.
The duration from the first event on the PBX (e.g. the creation of a new channel) to the popup notification in the browser should be short. Given a fast network I would like to be within two seconds. The single pieces of information about an event are created asynchronously. The local extension may be supplied separate from the remote extension. The user can enter a summary before the call has ended. The end time, new status etc. will show up on the interface as soon as one party has hung up.
The PBX monitor is just one data source. There will be more monitors like email or a request via a web form. The monitoring daemons will not necessarily run on the same host as the database or web server. I do not image the application will serve thousands of logged in users or concurrent requests soon. But from the design 200 users with maybe about the same number of events per minute should not be a scalability issue.
How should I do?
I am interested to know how you would design such an application. What technologies would you suggest? How do the daemons communicate their information? When and by whom is the data about an event stored into the main database? How does the user get notified? Should the browser receive a complete dataset on behalf of a daemon or just a short note that new data is available? Which JS library to use and how to create the necessary code on the server side?
On my research I came across a lot of possibilities: Message brokers, queue services, some rails background task solutions, HTTP Push services, XMPP and so on. Some products I am going to look into: ActiveMQ, Starling and Workling, Juggernaut and Bosh.
Maybe I am aiming too hight? If there is a simpler or easier way, like just using the XML or JSON interface of Rails, I would like to read this even more.
I hope the text is not too long :)
Thanks.
If you want to skip Java and Flash, perhaps it makes sense to use a technology in the Comet family to do the push from the server to the browser?
http://en.wikipedia.org/wiki/Comet_%28programming%29
For the sake of simplicity, for notifications from daemons to the Web browser, I'd leave Rails in the middle, create a RESTful interface to that Rails application, and have all of the daemons report to it. Then in your daemons you can do something as simple as use curl or libcurl to post the notifications. The Rails app would then be responsible for collecting the incoming notifications from the various sources and reporting them to the browser, either via JavaScript using a Comet solution or via some kind of fatter client implemented using Flash or Java.
You could approach this a number of ways but my only comment would be: Push, don't pull. For low latency it's not only quicker it's more efficient, as your server now doesn't have to handle n*clients once a second polling the db/queue. ActiveMQ is OK, but Starling will probably serve you better if you're not looking for insane levels of persistence.
You'll almost certainly end up using Flash on the client side (Juggernaut uses it last time I checked) or Java. This may be an issue for your clients (if they don't have Flash/Java installed) but for most people it's not an issue; still, a fallback mechanism onto a pull notification system might be prudent to implement.
Perhaps http://goldfishserver.com might be of some use to you. It provides a simple API to allow push notifications to your web pages. In short, when your data updates, send it (some payload data) to the Goldfish servers and your client browsers will be notified, with the same data.
Disclaimer: I am a developer working on goldfish.
The problem
There is an event - either external (or perhaps internally within your app).
Users should be notified.
One solution
I am myself facing this problem. I haven't solved it yet, but this is how I intend to do it. It may help you too:
(A) The app must learn about the event (via an exposed end point)
Expose an end point by which you app can be notified about external events.
When the end point is hit (and after authentication then users need to be notified).
(B) Notification
You can notify the user directly by changing the DOM on the current web page they are on.
You can notify users by using the Push API (but you need to make sure your browsers can target that).
All of these notification features should be able to be handled via Action Cable: (i) either by updating the DOM to notify you when a phone call comes in, or (ii) via a push notification that pops up in your browser.
Summary: use Action Cable.
(Also: why use an external service like Pusher, when you have ActionCable at your disposal? Some people say scalability, and infrastructure management. But I do not know enough to comment on these issues. )
We use stateful DataSnap servers for some business logic tasks and also to provide clientdataset data.
If we have to update the server to modify a business rule, we copy the new version into a new empty folder and register it (depending on the Delphi version, just by launching or by running the TRegSvr utility).
We can do this even while the old server instance is running. However, after registering the new version, all new client connections will still use the currently running (old) server instance. All clients have to disconnect first, then the new server will be used for the next clients.
Is there a way to direct all new client connections to the new server, immediately after registering?
(I know that new or changed method signatures will also require a change and restart of the clients but this question is about internal modifications which do not affect the interface)
We are using Socket connections, and all clients share the same server application (only one application window is open). In the early days we have used a different configuration of the remote datamodule which resulted in one app window per client. Maybe this could be a solution? (because every new client will launch the currently registered executable)
Update: does Delphi XE offer some support for 'hot deployment' (of updated servers)? We use Delphi 2009 at the moment but would upgrade to XE if it offers easier implementation of 'hot deployment'.
you could separate your appserver into 2 new servers, one being a simple proxy object redirecting all methods (and optionally containing state info if any) to the second one actually implementing your business logic. you also need to implement "silent reconnect" feature within your proxy server in order not to disturb connected clients if you decide to replace business appserver any time you want. never did such design myself before but hope the idea is clear
Have you tried renaming the current server and placing the new in the same location with the correct name (versus changing the registry location). I have done this for COM libraries before with success. I am not sure if it would apply to remote launch rules through as it may look for an existing instance to attach to instead of a completely fresh server.
It may be a bit hackish but you would have the client call a method on the server indicating that a newer version is available. This would allow it to perform any necessary cleanup so it doesn't end up talking to both the existing server instance and new server instance at the same time.
There is probably not a simple answer to this question, and I suspect that you will have to modify the client. The simplest solution I can think of is to have a flag (a property or an out parameter on some commonly called method) on the server that the client checks periodically that tells the client to disconnect and reconnect (called something like ImBeingRetired).
It's also possible to write callbacks under certain circumstances for datasnap (although I've never done this). This would allow the server to inform the client that it should restart or reconnect.
The last option I can think of (that hasn't already been mentioned) would be to make the client/server stateless, so that every time the client wants something it connects, gets what it wants then disconnects.
Unfortunately none of these options are the answer you want to your question, but might give you some ideas.
(optional) set up vmware vSphere, ESX, or find a hosting service that already has one.
Store the session variables in db.
Prepare 2 web boxes with 2 distinct IP address and deploy your stuff.
Set up DNS, firewall, load balancer, or BSD vm so name "example.com" resolves to web box 1.
Deploy new version to web box 2.
Switch over to web box 2 using whatever routing method you chose.
Deploy new version to web box 1 if things look ok.
Using DNS is probably easiest, but it takes time for the mapping to propagate to the client (if the client is outside your LAN) and also two clients may see different results. Some firewalls have IP address mapping feature that you can map public IP address and internal IP address. The ideal way is to use load balancer and configure it to 50:50 and change it to 100:0 when you want to do upgrade, but it costs money. A cheaper alternative is to run software load balancer on BSD vm, but it probably requires some work.
Edit: What I meant to say is session variables, not session. You said the server is stateful. If it contains some business logic that uses session variable, it needs to get stored externally to be preserved across reconnection during switch over. Actual DataSnap session will be lost, so when you shutdown web box 1 during upgrade, the client will get "Session {some-uuid} is not found" error by web box 1, and it will reconnect to web box 2.
Also you could use 3 IP addresses (1 public and 2 private) so the client always sees 1 address , which is better method.
I have done something similar by having a specific table which held my "data version". Each time I would update the server or change a system wide global setting, I would increment this field. When a client starts it always checks this value, and will check again before any transactions/queries. If the value was ever different from when I first started, then I needed to go through my re-initialization logic, which could easily include a re-login to an updated server.
I was using IIS to publish my app servers, so the data that would change would be the path to the app server. I kept the old ones available, to respond to any existing transactions that were in play. Eventually these would be removed once I knew there were no more client connections to that version.
You could easily handle knowing what versions to keep around if you log what server the client last connected too (and therefore would know about).
For newer versions (Delphi 2010 and up), there is an interesting solution
for systems using the HTTP transport:
Implementing Failover and Load Balancing in DataSnap 2010 by Andreano Lanusse
and a related question for the TCP/IP transport:
How to direct DataSnap client connections to various DS Servers?