Related
When i try to run my app in iPhone 6 simulator, i am getting following error. I am using Xcode 8.1 can any one please help me to understand this issue
I had this issue, where it would run it every time I deleted the app from the simulator, but when I tried to run it second time this error would show.
I solved it by resetting the iOS Simulator from the top bar menu.
Xcode 9.0:
Hardware → Erase All Content and Settings...
Pre Xcode 9.0:
Simulator → Reset Content and Settings...
I solved this with restart iOS Simulator: Hardware -> Reboot.
You can also solve this issue by just rebooting your simulator. there is no need to reset the simulator.
i have same problem and i have solved it by just rebooting simulator.
Check the Schema name and Executable file name in plistfile. both should be same.
I had this problem with an app that contained an embedded Sticker extension.
To work around it I first installed the app without the Sticker extension, I did this by clicking the Sticker.appex in the Products group and removing the app 'Target Membership' using the Inspector panel.
Once the app was installed, I could re-toggle the target membership and install the app with the Sticker extension.
SOLVED
I'd added ios platform with sudo. That why it happened. Now I do it without sudo, it works well.
Please follow below steps to fix it:
Remove platform (with sudo)
$ sudo ionic cordova platform rm ios
Add platform (without sudo)
$ ionic cordova platform add ios
Emulate
$ ionic cordova run ios
Please check for more info:
https://github.com/ionic-team/ionic/issues/4052#issuecomment-352999643
For solving this issue, U need to go for trial n Error. This error generally appears when you directly delete a file but missed to delete its mapping.
So to resolve this, verify all the mappings in 'AddedLib', 'Resources', and 'complied Resources' sec etc.
I recently installed the beta of Xcode Version 6 in OS X Mavericks, with which comes the iOS simulator for iOS 8. I've managed to successfully run from Xcode 6 beta on a device with iOS 8 Beta, but opening the simulator always get the same error I have tried to change the hardware version of iPhone 4s, iPhone 5, ... in the simulator and still gives the same error: "Unable to boot the iOS Simulator".
I'm working with Xcode 5.1 at the same time in Mavericks, any suggestion to solve this? Is a possible problem for run this simulator in Mavericks because is only for OS X 10.10? Thanks.
After I found some solutions on the web, a combination of procedures worked for me:
Close Xcode and iOS Simulator (and all related applications)
Install (or reinstall) Xcode6-Beta to Applications folder (direct from the .dmg file)
Open Xcode6-Beta and go to Xcode -> Preferences -> Locations -> Command Line Tools and select "Xcode 6.0" (be sure that you've selected the one in Applications folder)
Launch the iOS Simulator and go to iOS Simulator -> Reset Content and Settings...
Close all the applications and restart your mac (I unchecked "Reopen windows...")
Open Xcode6-beta and test the iOS Simulator
Good luck
I also had this problem and found the solution by doing following steps:
Initially i downloaded Xcode 6 library in Documentation section under the path Xcode --> Preferences --> Downloads and restart my xcode but didn't solve my problem.
Downloaded and installed the iOS 7.1 Simulator under the path Xcode --> Preferences --> Downloads.
Restart xcode again and the problem solved.
I am facing same issue again next morning.
Unsetting the DYLD_INSERT_LIBRARIES variable solves my problem:-
Open terminal and type "sudo vi /etc/launchd.conf" command and press Enter
Press I "Insert" mode and change this
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to this
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
and press esc to exit from insert mode.
Save changes by typing ":wq" Press Enter
Reboot your system and problem soloved.
Prior to that I didn't find any iOS version in front of each listed devices
but after installation or by unsetting DYLD_INSERT_LIBRARIES variable I found the same in front of each device.
I solved by removing and re-adding the simulators see screenshots here.
https://stackoverflow.com/a/25387715/1565615
I don't believe your issue is related to running Xcode 6 in Mavericks, as I encountered the same error on OS X 10.10.
After a bit of toying around with XCode and the iOS Simulator, the only fix I found was simply restarting the computer, and the error hasn't appeared since.
Try a reboot and then see if you can get things up and running.
(On a side note, after restarting just XCode (not the OS), I lost the option to run on the simulator at all—the reboot also fixed this problem, if anyone here encounters anything similar).
In Xcode go to the Xcode menu->Open Developer Tool - IOS Simulators. Choose simulator and then go hardware->device->manage device.
If the troubled device shows in the left column, delete it. Then add the device back from the '+' button. If it wasn't there in the first place, simply add it using the '+' button.
I had previously deleted ~/Library/Developer/CoreSimulator/ directory and the only command that worked for me is xcrun simctl erase all. Perhaps you might want to give this a try.
No need to download a new ios version. All you need is to go to About this Mac > Storage > Manage > Delete XCode Cache. And, it works for me
In latest OS version
About this Mac > Storage > Manage > Developer > select Xcode cache > Click delete button
I've faced same issue and solved by below steps:
1) Move xcode6-beta into application folder
2) Restart mac and open xcode6-beta from application folder.
i too had the same issue, but solved by installing the required simulators (Xcode > Preferences> downloads > install simulators)
This happened to me running the simulator on both Xcode 7 and 8 on El Capitan. The only thing that worked was disabling System Integrity Protection (https://apple.stackexchange.com/a/208481/86757).
I tested an awful quantity of solutions and the only one which worked for me was disabling root protection through Recovery Mode. I tested it with XCode 7.3, it's possible that this approach may work for XCode 8.
Reboot and hold the keys cmd + R prior to show the loading view with Apple Logo
When you are on Recovery Mode, go to Menu and choose Terminal
Type csrutil disable
Reboot the machine and run the simulator again.
I am adding this answer as it seems to be slightly different from the others.
Due to working on an older project I needed to download and run Xcode 7.3 and load the project in simulator - this yielded the "Unable to boot the iOS Simulator" error.
I completed all the above suggestions and none of them worked (reset simulator setting, restarted, deleted and reinstalled Xcode, reset the simulator location, restarted again etc)
In the end the issue was that I was trying to load the iPhone 5 (10.0) simulator on Xcode 7.3.
You can see here the Apple release notes for Xcode 7.3
Xcode 7.3 requires a Mac running OS X 10.11 or later.
Xcode 7.3 includes SDKs for iOS 9.3, watchOS 2.2, OS X version 10.11.4, and tvOS
9.2.
As you can see Xcode 7.3 doesn't include an SDK for iOS 10.0
This meant as soon as I loaded the simulator with iPhone 5 (9.3) it worked immediately.
I would therefore recommend when approaching this issue not to get railroaded (as I did) in thinking that something is wrong with the system before checking the basic things.
Note: It is also worth noting that the simulator must be configured to the Xcode version being used. This can be set in
Xcode -> Preferences -> Locations -> Command Line Tools
and also using the command line:
sudo xcode-select --switch /Applications/Xcode_7.3.app/Contents/Developer
*change the Xcode version to the new one you want to use
one of the reasons could be you might deleted /private folder.
you can try with following commands
sudo mkdir /private/tmp
sudo chmod 1777 /private/tmp
Following are the steps for solved above issue:
Search launchd.conf file in your mac
If not found then create from Terminal with help of command
~ user$ sudo touch /etc/launchd.conf
Terminal will ask you machine password
Then Open created file with help of command for EDIT, if terminal give you error as permission failed
~ user$ sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/launchd.conf
Open file manually from /etc/launchd.conf (Shift+cmd+g) and enter /etc/ (TextEdit software)
In file "DYLD_INSERT_LIBRARIES" flag replace with "ZZ" and save it.
Restart your machine.
Xcode will defiantly works.
This error indicates an error starting up launchd_sim when booting the simulated device. In and of itself, it does not indicate the actual cause. You can look in ~/Library/Logs/CoreSimulator/CoreSimulator.log for more information about the error (including the error reason).
Possible causes:
On OSX 10.9 and earlier, DYLD_INSERT_LIBRARIES could be set by 3rd party applications. On later versions, invalid DYLD_INSERT_LIBRARIES are ignored instead of resulting in an error.
Usage of older simulator runtime DLC with Xcode 7 betas. Newer versions of Xcode ignore these older DLC.
If you need additional help, please provide that additional datum.
Just check your simulator's iOS version. I fought with this error for 2 days and tried everything. Once I run the project on the simulator with iOS version that my Xcode supports, it worked sadly... :/
I quit everything and restarted the Mac. That's all. Its worked like charm!!
I don't know why, but this happened to me when I had Charles Proxy's throttling turned on.
I didn't have to run Xcode again or clean anything. Just disabling the throttling allowed the simulator to work again.
I also clicked on details, but this was all that I got:
Details
Unable to boot the Simulator. Domain: NSPOSIXErrorDomain
Code 60
Failure Reason: launchd failed to respond.
This might be related a known Xcode 11.2 issue:
Third party “endpoint security” software may cause slow simulators, system freezes, or prevent debug processes from running in simulators reliably. This sometimes manifests as debugserver disconnections or simulator applications receiving a SIGKILL signal. (55853555)
Workaround: Uninstall the third party software.
Though I was seeing this error on 11.1. Yet Apple may have just not realized this was an issue on 11.1 as well ¯_(ツ)_/¯
I have solved this issue using following steps:
Xcode -> Preferences -> Location -> Derived Data -> Delete your project folder.
I got this error on OS Catalina, Xcode 11.
I solved this by simply quiting simulator and Xcode, and then start Xcode and run your application.
1. Quit Xcode and Simulator if running.
2. Remove customised settings setup
defaults delete com.apple.Xcode
3. remove configuration folders
rm -rf ~/Library/Application\ Support/Xcode
4. Quit the terminal and run Xcode again.
Resetting the simulators fixed the issue for me. Run the below
Fastlane command to reset all simulators,
fastlane snapshot reset_simulators
Please ensure you have closed Xcode & simulator before running the command.
Fastlane is an Android & iOS deployment automation tool.
I just simply follow the below steps and the issue is resolved...
Go to About This Mac > Storage > Manage > Developer >
Select Xcode cache > Delete the cache
Now try to open the simulator again and it will work... In case if above steps did not work just try to do the same with s
Late answer, but it maybe helpful to someone. I tried all the solutions provided in this and related posts and neither of them worked.
I am using OSX(version 10.10.3) and Xcode 6.2. To fix this issue I followed the following steps :
Delete all xcode and simulator related files using AppCleaner.
Restart Mac.
Open Disk Utility app from applications.
In Disk Utility app; click on button Verify Disk Permission for your Macintosh HD (there will be some warnings displayed; I think /private/tmp is cause of this issue).
In Disk Utility app; click on button Repair Disk Permission for your Macintosh HD.
Re-install Xcode; now it should work.
More info : How to fix Xcode error ‘Unable to boot iOS Simulator’.
This may helpful
Open simulator with 4s
Click on menu- iOS simulator
Click on Reset content and settings...
Force close the simulator and run app.
Getting this error for pods in Xcode when trying to run app:
error: A cryptographic verification failure has occurred.
Tried reinstalling Pods/repo
Reinstalling Xcode(s)
Also doesn't run on simulators:
Also, running Sierra at the moment (yes, I know).
This is a regression in macOS Sierra that multiple developers have reported in the forums and in the lab sessions at WWDC. Xcode 7.3 is not officially supported on Sierra. If you want to use macOS Sierra, please use Xcode 8.0 beta or later.
If you must use Xcode 7.3 on Sierra, you can partially workaround this bug by using Xcode.app to install the app through Build & Run, launch the app suspended from the command line (xcrun simctl launch -w booted <app identifier>) and then attach with the debugger and resume the suspended process.
Note that this issue only impact Xcode 7.3.1 downloaded from the Mac App Store. You will not hit this issue if you use Xcode downloaded from http://developer.apple.com (ie, the "drag & drop installer"). Note that you might hit another issue with the same symptoms when using the drag & drop installer. That is discussed in DTAssetProviderService could not start DTXConnection with Simulator
I got mine working now!! Not really sure what I did, at all, but I just deleted the Xcode 8 .app entirely and then I redownloaded it, opened up my project in it, did a pod install and pod update, and it's running in the simulator just like normal! Not sure what I did at all, but redownloading is worth a try, it is in fact possible to fix.
If you have reinstalled CocoaPods so that it updated from a version that is lower than 1.0.0 to 1.0.0 or above it can't hurt to delete your DerivedData folder of the project that is having problems. I don't know why it fixes a lot of bugs when above scenario is the case, but it does! You can do this by going to: Window -> Projects
Then select your project on the left (It was my "Piece" project for me)
Then click the delete button
Hope this helps you out!
Launch "Keychain Access", go to "Preferences..." and click "Reset My Default Keychain". After that I was finally able to build my projects.
I want to use a playground in Xcode 6.0.1.
So File -> New -> Playground
I get immediately the error.
Playground execution terminated because the playground process exited unexpectedly.
See image. Restart Xcode didn't helped.
Whats wrong with Xcode?
New Answer:
As #Woomin points out in the comments, first try restarting Xcode and rebooting your Mac, and if that fails try the following:
Try deleting the .simruntime files:
I found them located here in my root directory:
Old Answer:
If the above doesn't work try removing everything in the Developer folder located at /Library/Developer/. If this still doesn't work try removing everything in ~/Library/Developer/. If this still doesn't solve it remove xcode with AppCleaner and reinstall it using the MAS version. I found that doing this last thing solved the issue but it came back when I installed the simulators from xcode's download tab. Removing the .simruntime files finally solved it for me. BTW, I'm using version 7.2.
A restart of the mac solves the problem. What causes the issue is still unknown.
Thanks smileBot's answer. I am able to make it work with 7.2 too. I did try differently.
I installed Xcode 7.2 release version via downloading. However it had problem mentioned above. I first deleted the Xcode 7.2 via AppCleaner completely. Empty the trash. Also cleaned the derived data using WatchDog for Xcode And then restart the machine. Try again, it did not work.
So I went ahead deleted the folder ~/Library/Developer/ and then restart, try again, I can use Playground again in Xcode 7.2 again.
Xcode 7.2 and Mac os x 10.11.2
Restart Xcode or mac does not worked for me.
I solve this problem is that delete the Simulator Profiles. The Path is ~/Library/Developer/CoreSimulator/Profiles/Runtimes. Delete all Runtimes. Than Restart the Xcode, problem has been solved.
Install Command line tools using command
xcode-select --install
then u will get an update in Appstore install that app Problem will be solved.
OSX 10.11.2 and Xcode 7.2
I had gotten a reply to his from a member on the Apple Developer Forum and wanted to provide some additional information on my fix for this. First I deleted the ~/Library/Developer folder as indicated. Looking into it it had the some Simulator Profiles. I didn't know what that had to do with the Playground issue so I did NOT empty the Trash. I rebooted and the playground worked.
I put back the folder and the playground had the issues again. I one by one removed the simulator profiles in the sub directory ultimately removing ALL of the profiles without deleting the ~/Library/Developer folder structure and the Playground works.
With Xcode 7.2 (7C68) i had the same problem. I'd solve it by changing the entry of the runtime value from com.apple.CoreSimulator.SimRuntime.iOS-9-1 to com.apple.CoreSimulator.SimRuntime.iOS-9-2. I'd changed it in the device.plist. In ~/Library/Developer/CoreSimulator/XCPGDevices/ is one or more folder with a UUID as name. In one of this folders is the current device.plist.
It's not necessary to delete manually Developer's folder. Just follow this steps in Command Line (CL).
Quit Xcode.app, Simulator.app and all Xcode related and then in CL:
sudo killall -9 com.apple.CoreSimulator.CoreSimulatorService
rm -rf ~/Library/*/CoreSimulator
A restart of Xcode solves the problem , most of the times . (Do remember to quit from the dock too)
If that doesn't work a restart of Mac is all that is required
This happened to me and I found that the platform setting wasn't set for my playground. Probably because the playground was created in a previous version of XCode which didn't require it.
Solution:
Double click on your playground to open it in XCode and wait for the fail message.
Dismiss the message (it may appear more than once) and do the following
1.Select to show the project navigator pane.
2.Select the workspace in the navigator.
3.Select to show the Utilities pane.
4.In the playground settings area of the Identity inspector. Select OSX (or iOS)
It is ok when Change the platform to "OS X" from inspector, but problem when back to "iOS". I don't know why...in Xcode7 Beta.
Plus, it is ok in my Xcode 6.4 for both platform when playground.
And there is one more option for iOS platform "Run in Full Simulator",besides "Render Documentation"option. in My Xcode 6.4 inspector
and I have check the "IDEPlaygroundSettings.inspector" in
/Applications/Xcode.app/Contents//PlugIns/IDELanguageSupportUI.ideplugin/Contents/Resources/IDEPlaygroundSettings.inspector
and
/Applications/Xcode-Beta.app/Contents//PlugIns/IDELanguageSupportUI.ideplugin/Contents/Resources/IDEPlaygroundSettings.inspector
they are quite different.
I recently installed the beta of Xcode Version 6 in OS X Mavericks, with which comes the iOS simulator for iOS 8. I've managed to successfully run from Xcode 6 beta on a device with iOS 8 Beta, but opening the simulator always get the same error I have tried to change the hardware version of iPhone 4s, iPhone 5, ... in the simulator and still gives the same error: "Unable to boot the iOS Simulator".
I'm working with Xcode 5.1 at the same time in Mavericks, any suggestion to solve this? Is a possible problem for run this simulator in Mavericks because is only for OS X 10.10? Thanks.
After I found some solutions on the web, a combination of procedures worked for me:
Close Xcode and iOS Simulator (and all related applications)
Install (or reinstall) Xcode6-Beta to Applications folder (direct from the .dmg file)
Open Xcode6-Beta and go to Xcode -> Preferences -> Locations -> Command Line Tools and select "Xcode 6.0" (be sure that you've selected the one in Applications folder)
Launch the iOS Simulator and go to iOS Simulator -> Reset Content and Settings...
Close all the applications and restart your mac (I unchecked "Reopen windows...")
Open Xcode6-beta and test the iOS Simulator
Good luck
I also had this problem and found the solution by doing following steps:
Initially i downloaded Xcode 6 library in Documentation section under the path Xcode --> Preferences --> Downloads and restart my xcode but didn't solve my problem.
Downloaded and installed the iOS 7.1 Simulator under the path Xcode --> Preferences --> Downloads.
Restart xcode again and the problem solved.
I am facing same issue again next morning.
Unsetting the DYLD_INSERT_LIBRARIES variable solves my problem:-
Open terminal and type "sudo vi /etc/launchd.conf" command and press Enter
Press I "Insert" mode and change this
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to this
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
and press esc to exit from insert mode.
Save changes by typing ":wq" Press Enter
Reboot your system and problem soloved.
Prior to that I didn't find any iOS version in front of each listed devices
but after installation or by unsetting DYLD_INSERT_LIBRARIES variable I found the same in front of each device.
I solved by removing and re-adding the simulators see screenshots here.
https://stackoverflow.com/a/25387715/1565615
I don't believe your issue is related to running Xcode 6 in Mavericks, as I encountered the same error on OS X 10.10.
After a bit of toying around with XCode and the iOS Simulator, the only fix I found was simply restarting the computer, and the error hasn't appeared since.
Try a reboot and then see if you can get things up and running.
(On a side note, after restarting just XCode (not the OS), I lost the option to run on the simulator at all—the reboot also fixed this problem, if anyone here encounters anything similar).
In Xcode go to the Xcode menu->Open Developer Tool - IOS Simulators. Choose simulator and then go hardware->device->manage device.
If the troubled device shows in the left column, delete it. Then add the device back from the '+' button. If it wasn't there in the first place, simply add it using the '+' button.
I had previously deleted ~/Library/Developer/CoreSimulator/ directory and the only command that worked for me is xcrun simctl erase all. Perhaps you might want to give this a try.
No need to download a new ios version. All you need is to go to About this Mac > Storage > Manage > Delete XCode Cache. And, it works for me
In latest OS version
About this Mac > Storage > Manage > Developer > select Xcode cache > Click delete button
I've faced same issue and solved by below steps:
1) Move xcode6-beta into application folder
2) Restart mac and open xcode6-beta from application folder.
i too had the same issue, but solved by installing the required simulators (Xcode > Preferences> downloads > install simulators)
This happened to me running the simulator on both Xcode 7 and 8 on El Capitan. The only thing that worked was disabling System Integrity Protection (https://apple.stackexchange.com/a/208481/86757).
I tested an awful quantity of solutions and the only one which worked for me was disabling root protection through Recovery Mode. I tested it with XCode 7.3, it's possible that this approach may work for XCode 8.
Reboot and hold the keys cmd + R prior to show the loading view with Apple Logo
When you are on Recovery Mode, go to Menu and choose Terminal
Type csrutil disable
Reboot the machine and run the simulator again.
I am adding this answer as it seems to be slightly different from the others.
Due to working on an older project I needed to download and run Xcode 7.3 and load the project in simulator - this yielded the "Unable to boot the iOS Simulator" error.
I completed all the above suggestions and none of them worked (reset simulator setting, restarted, deleted and reinstalled Xcode, reset the simulator location, restarted again etc)
In the end the issue was that I was trying to load the iPhone 5 (10.0) simulator on Xcode 7.3.
You can see here the Apple release notes for Xcode 7.3
Xcode 7.3 requires a Mac running OS X 10.11 or later.
Xcode 7.3 includes SDKs for iOS 9.3, watchOS 2.2, OS X version 10.11.4, and tvOS
9.2.
As you can see Xcode 7.3 doesn't include an SDK for iOS 10.0
This meant as soon as I loaded the simulator with iPhone 5 (9.3) it worked immediately.
I would therefore recommend when approaching this issue not to get railroaded (as I did) in thinking that something is wrong with the system before checking the basic things.
Note: It is also worth noting that the simulator must be configured to the Xcode version being used. This can be set in
Xcode -> Preferences -> Locations -> Command Line Tools
and also using the command line:
sudo xcode-select --switch /Applications/Xcode_7.3.app/Contents/Developer
*change the Xcode version to the new one you want to use
one of the reasons could be you might deleted /private folder.
you can try with following commands
sudo mkdir /private/tmp
sudo chmod 1777 /private/tmp
Following are the steps for solved above issue:
Search launchd.conf file in your mac
If not found then create from Terminal with help of command
~ user$ sudo touch /etc/launchd.conf
Terminal will ask you machine password
Then Open created file with help of command for EDIT, if terminal give you error as permission failed
~ user$ sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/launchd.conf
Open file manually from /etc/launchd.conf (Shift+cmd+g) and enter /etc/ (TextEdit software)
In file "DYLD_INSERT_LIBRARIES" flag replace with "ZZ" and save it.
Restart your machine.
Xcode will defiantly works.
This error indicates an error starting up launchd_sim when booting the simulated device. In and of itself, it does not indicate the actual cause. You can look in ~/Library/Logs/CoreSimulator/CoreSimulator.log for more information about the error (including the error reason).
Possible causes:
On OSX 10.9 and earlier, DYLD_INSERT_LIBRARIES could be set by 3rd party applications. On later versions, invalid DYLD_INSERT_LIBRARIES are ignored instead of resulting in an error.
Usage of older simulator runtime DLC with Xcode 7 betas. Newer versions of Xcode ignore these older DLC.
If you need additional help, please provide that additional datum.
Just check your simulator's iOS version. I fought with this error for 2 days and tried everything. Once I run the project on the simulator with iOS version that my Xcode supports, it worked sadly... :/
I quit everything and restarted the Mac. That's all. Its worked like charm!!
I don't know why, but this happened to me when I had Charles Proxy's throttling turned on.
I didn't have to run Xcode again or clean anything. Just disabling the throttling allowed the simulator to work again.
I also clicked on details, but this was all that I got:
Details
Unable to boot the Simulator. Domain: NSPOSIXErrorDomain
Code 60
Failure Reason: launchd failed to respond.
This might be related a known Xcode 11.2 issue:
Third party “endpoint security” software may cause slow simulators, system freezes, or prevent debug processes from running in simulators reliably. This sometimes manifests as debugserver disconnections or simulator applications receiving a SIGKILL signal. (55853555)
Workaround: Uninstall the third party software.
Though I was seeing this error on 11.1. Yet Apple may have just not realized this was an issue on 11.1 as well ¯_(ツ)_/¯
I have solved this issue using following steps:
Xcode -> Preferences -> Location -> Derived Data -> Delete your project folder.
I got this error on OS Catalina, Xcode 11.
I solved this by simply quiting simulator and Xcode, and then start Xcode and run your application.
1. Quit Xcode and Simulator if running.
2. Remove customised settings setup
defaults delete com.apple.Xcode
3. remove configuration folders
rm -rf ~/Library/Application\ Support/Xcode
4. Quit the terminal and run Xcode again.
Resetting the simulators fixed the issue for me. Run the below
Fastlane command to reset all simulators,
fastlane snapshot reset_simulators
Please ensure you have closed Xcode & simulator before running the command.
Fastlane is an Android & iOS deployment automation tool.
I just simply follow the below steps and the issue is resolved...
Go to About This Mac > Storage > Manage > Developer >
Select Xcode cache > Delete the cache
Now try to open the simulator again and it will work... In case if above steps did not work just try to do the same with s
Late answer, but it maybe helpful to someone. I tried all the solutions provided in this and related posts and neither of them worked.
I am using OSX(version 10.10.3) and Xcode 6.2. To fix this issue I followed the following steps :
Delete all xcode and simulator related files using AppCleaner.
Restart Mac.
Open Disk Utility app from applications.
In Disk Utility app; click on button Verify Disk Permission for your Macintosh HD (there will be some warnings displayed; I think /private/tmp is cause of this issue).
In Disk Utility app; click on button Repair Disk Permission for your Macintosh HD.
Re-install Xcode; now it should work.
More info : How to fix Xcode error ‘Unable to boot iOS Simulator’.
This may helpful
Open simulator with 4s
Click on menu- iOS simulator
Click on Reset content and settings...
Force close the simulator and run app.