Here is something I want to achieve:
I have a jenkins project which has 4 upstream projects. But I don't want to trigger this project when the upstream jobs are done building, but I want the trigger the project via remote API, which then waits on upstream projects until they are done building, if these projects are building.
Lets say all the 4 upstream projects can build the source code from any branch passed via API, but I want the downstream project to start only when a specific branch is passed to these upstream projects.
Scenario:
Lets say I have two clusters A and B, for the sake of this question, I want to deploy my code to cluster A, i.e front end and backend code. Now I have a project to build front end and 1 project to build backend (these two projects can build code for cluster A and B, based on the branch passed). Now, I have two deploy projects for cluster A which will deploy front end and backend. So, when I pass a branch to build code for cluster A, it will trigger the build projects. But now I only want these two deploy projects to start when this specific branch was passed.
If you want to control the builds remotely then use the Jerkins cli - I have found it very useful http://jenkinshost:8080/cli
You need to get the ssh key config right, add the public key of the user running the cli to the user you want to run the job in Jenkins using the Jenkins user configuration (not on the command line
Test key setup with
java -jar jenkins=cli.jar -s http://jenkinshost:8080 who-am-i
This should then report which user will be used to run the build in Jenkins
But I think you can use the Conditional Build Step plugin for your problem
https://wiki.jenkins-ci.org/display/JENKINS/Conditional+BuildStep+Plugin
This will allow you to put a conditional wrapper around a build step i.e.
if branch==branchA then
trigger step - deploy to clusterA
if branch==branchB then
trigger step - deploy to clusterB
Personally I find this plugin a bit clunky and it makes the job config page a little messy
Another solution I came up with was to always call the child job and then let it decide if it runs.
So I have a script step at the start of the child job to see if it should run
if [${branch}="Not the right branch name" ] ; then
echo "EXIT_GREEN"
exit 1
fi
You have now failed this job which would cause the parent job to go red but by using the Groovy Postbuild plugin https://wiki.jenkins-ci.org/display/JENKINS/Groovy+Postbuild+Plugin you can add a post build step like this
if (manager.logContains(".*EXIT_GREEN.*")) {
manager.addBadge("info.gif","This job had nothing to do")
manager.build.#result = hudson.model.Result.SUCCESS
}
Child job has run green (with an info icon against the build) but has actually not done anything. Obviously if the branch is one you want deploy then the first script step does not run the exit 1 and the job continues as normal
Related
I have these Jenkins jobs A and B. Job A Builds a bunch of Files for my project. In Job B i wanna execute a command to run a file in the most recent build of job A.
My execution even works fine, but only because I have hard coded the build number and I am picking that from the files stored by Jenkins in my C:JenkinsData Directory, I would wanna have that called from the Workspace instead
See image for clarification.
Jenkins build steps illustration
For e.g my last build right now is 70 I want to know how I can be always executing those same files but in the most recent Build
Or if its even way better Can I execute those same file from Job A since the built files are in the Workspace.
You could get the last build index using this API and "number" property:
/lastBuild/api/json
ie:
http://localhost:8080/job/yourJobName/lastBuild/api/json
This could help:
Jenkins - Get last completed build status
I'm currently using Jenkins FreeStyle Project in my project,trying to migrate to Jenkins Pipeline, but I'm facing some issues:
1) I need to commit jenkinsfile in my project, but my deploy phase is just copy from target/project.war to jboss deployment folder, as shown below:
stage('Deploy') {
steps {
sh 'cp /var/lib/jenkins/workspace/project/project.war /opt/jboss/standalone/deployment/project.war'
}
}
The problem: currently the path is fixed and tomorrow if a change occurs and there is a need to deploy to another machine, An update should be made to the source code which should be avoided. In FreeStyle project i just update the JOB and everything works.
2) The project has 3 modules. The FreeStyle project was configured so that JOB A will call JOB B on finish. In pipeline how can this order be achieved:
- Start JOB A --> JOB B --> JOB C.
You can add the following into your script
1.Issue with copying:
Firstly, you avoid using the actual path(Location of file in workspace) to a
relative Path i.e. using project/*.war or **/*.war it will take it
from the workspace itself.
Second, Coming to the issue that you have
to change the target location like you said you have to change it
FreeStyle Project :) so you have to change it in the
JenkinsFile also :)
2.To call other jobs in your pipeline and the following
build job: 'Job2', parameters: [
new org.jvnet.jenkins.plugins.nodelabelparameter.NodeParameterValue
("TARGET_NODE", "description", nodeName)
]
If it does not have any parameter remove that section out.
There is something called Jenkins workflow which provides more power and control if your interested in it, you can look it up here https://dzone.com/refcardz/continuous-delivery-with-jenkins-workflow?chapter=1
you can use sshPulissher:send build artifacts over ssh
add this code in your jenkins pipeline
and configure your sshServer in manage jenkins
finally your war is transfert in your destination
I am building Jenkins for Test / QA automation scripts, lets name it TEST_JOB. For application, I have application source code Jenkins build, name it DEV_JOB.
My scenario is when DEV_JOB completes execution (successfully), execute TEST_JOB immediately. I am aware about setting up project upstream / downstream [ Build after other projects are built ] to accomplish this task. But here, Problem is DEV_JOB is on different server than TEST_JOB. Due to which, TEST_JOB fails to recognize DEV_JOB.
Now, how would I achieve this scenario?
You can use Jenkins API for remote trigger of Job.
Say you have job on DEV_JOB on JENKINS_1, add a penultimate step(or upstream/downstream project having only this step) which invokes TEST_JOB using remote API call of JENKINS_2 server.
Example command would be
$(curl --user "username:password" "http://JENKINS_2/job/TEST_JOB/buildWithParameters?SOMEPARAMETER=$SOMEPARAMETER")
username:password is a valid user on JENKINS_2.
Avoid using your own account here but rather a 'build trigger' account that only has permissions to start those jobs.
I'm new to Jenkins. I have a requirement where I need to run part of a job on the Master node and the rest on a slave node.
I tried searching on forums but couldn't find anything related to that. Is it possible to do this?
If not, I'll have to break it into two separate jobs.
EDIT
Basically I have a job that checks out source code from svn, then compiles and builds jar files. After that it's building a wise installer for this application. I'd like to do source code checkout and compilation on the master(Linux) and delegate Wise Installer setup to a Windows slave.
It's definitely easier to do this with two separate jobs; you can make the master job trigger the slave job (or vice versa).
If you publish the files that need to be bundled into the installer as build artifacts from the master build, you can pull them onto the slave via a Jenkins URL and create the installer. Use the "Archive artifacts" post build step in the master build to do this.
The Pipeline Plugin allows you to write jobs that run on multiple slave nodes. You don't even have to go create other separate jobs in Jenkins -- just write another node statement in the Pipeline script and that block will just run on an assigned node. You can specify labels if you want to restrict the type of node it runs on.
For example, this Pipeline script will execute parts of it on two different nodes:
node('linux') {
git url: 'https://github.com/jglick/simple-maven-project-with-tests.git'
sh "make"
step([$class: 'ArtifactArchiver', artifacts: 'build/program', fingerprint: true])
}
node('windows && amd64') {
git url: 'https://github.com/jglick/simple-maven-project-with-tests.git'
sh "mytest.exe"
}
Some more information at the Pipeline plugin tutorial. (Note that it was previously called the Workflow Plugin.)
You can use the Multijob plugin which adds an the idea of a build phase which runs other jobs in parallel as a build step. You can still continue to use the regular freestyle job build and post build options as well
I have problem in configure jenkins to auto build and deploy java project. I want to build and deploy once a day. However this build only there are changes during the day. IF there is no changes, I don't want jenkins to auto build and deploy.
Note: that I used gitlab as source code management.
Can you help me with this configuration.?
Firstly, you should configure the Git SCM section at the top of the job config page to point to your GitLab repository.
Then you can use the built-in "Poll SCM" build trigger — this will periodically check whether your source code repository has changed — and if it has, a build of this job will be started.
If the repository has not changed since the last build, then no build will be started.
You can configure this trigger — whether using a cron-like syntax, or a shortcut like #daily or #midnight — so that Jenkins only checks the source repository once a day.
Additionally, you should make sure that the "ignore post-commit hooks" option is enabled. If you're using webhooks from your Git repository to start Jenkins jobs whenever a commit occurs, this option prevents your once-per-day job from being triggered for every Git commit.
Here's the detail document: "Jenkins CI integration"
http://doc.gitlab.com/ee/integration/jenkins.html
Update to match your comment.
You don't want to trigger the Jenkins build via webhook. It's ok.
You want to check the code change 1 time a day.
Example on Linux, build at 6:00 AM if there's any code change.
Install
https://wiki.jenkins-ci.org/display/JENKINS/PostBuildScript+Plugin
https://wiki.jenkins-ci.org/display/JENKINS/Text-finder+Plugin
Build Triggers
Build periodically: 0 6 * * *
Execute shell
Like this
SINCE=`curl http://192.168.0.1:8080/job/MyJava/lastStableBuild/buildTimestamp?format=dd-MMM-yyyy`
cd /opt/code/myjava/
git log --pretty="%h - %s" --author=gitster --since=$SINCE --before=$SINCE --no-merges -- t/
Post Build actions
Post build task
Log text: commit
Operation: AND
Script: Your script to build your Java
Jenkins text finder
Also search the console output
Regular expression: Could not match
Unstable if found