I am new to AFNetworking. How can i execute the success and failure blocks of the following
NSMutableDictionary *rus = [[NSMutableDictionary alloc] init];
[rus setValue:#"1211" forKey:#"id"];
[rus setValue:#"33" forKey:#"man"];
[[AFHTTPRequestSerializer serializer] requestWithMethod:#"POST" URLString:#"http://mysite.co/service.php" rus];
How to show the success or failure after executing the above code fragment.
requestWithMethod does not actually complete the call, it just returns you an NSMutableURLRequest. You need to take that request and make an AFHTTPRequestOperation. You can set a success/failure block on this object and then run the start method.
NSMutableDictionary *rus = [[NSMutableDictionary alloc] init];
[rus setValue:#"1211" forKey:#"id"];
[rus setValue:#"33" forKey:#"man"];
NSMutableURLRequest *request = [[AFHTTPRequestSerializer serializer] requestWithMethod:#"POST" URLString:#"http://mysite.co/service.php" parameters:rus];
AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc] initWithRequest:request];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject) {
// Code for success
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
//Code for failure
}];
[operation start];
All that being said, are you using an outdated version of AFNetworking? The method you're referencing is deprecated.
- (NSMutableURLRequest *)requestWithMethod:(NSString *)method
URLString:(NSString *)URLString
parameters:(id)parameters
error:(NSError *__autoreleasing *)error
Above is the correct method to use. You should pass in an error object.
Finally, an even easier way to accomplish what you're doing with AFNetworking 2.0 is below:
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
[manager POST:#"http://mysite.co/service.php" parameters:rus success:^(AFHTTPRequestOperation *operation, id responseObject) {
// Code for success
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
// Code for failure
}];
Try this code:
NSMutableDictionary *rus = [[NSMutableDictionary alloc] init];
[rus setValue:#"1211" forKey:#"id"];
[rus setValue:#"33" forKey:#"man"];
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
[manager POST:#"http://mysite.co/service.php" parameters:rus success:^(AFHTTPRequestOperation *operation, id responseObject) {
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
}];
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
[manager POST:#"http://mysite.co/service.php" parameters:rus success:^(AFHTTPRequestOperation *operation, id responseObject) {
// Code for success
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
// Code for failure
}];
github's AFNetworking document
https://github.com/AFNetworking/AFNetworking
Related
I am trying to use AFHTTPRequestOperationManager to make an HTTP request. I need to use AFHTTPRequestOperationManager because I want to be able to cancel all operations if necessary. I can't get this working for some reason. The completion blocks aren't called. Am I missing something?
NSURL *url = [NSURL URLWithString:[NSString stringWithFormat:#"https://twitter.com/%#", username]];
NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:url];
[request setValue:#"MyUserAgent (iPhone; iOS 7.0.2; gzip)" forHTTPHeaderField:#"User-Agent"];
[request setHTTPMethod:#"GET"];
[self.manager HTTPRequestOperationWithRequest:request success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSString *html = [[NSString alloc] initWithData:responseObject encoding:NSUTF8StringEncoding];
if ([html containsString:#"var h = decodeURI(l.hash.substr(1)).toLowerCase();"]) {
completion(YES, nil);
} else {
completion(NO, nil);
}
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
completion(NO, error);
}];
This is working code, you need to use GET or POST method there.
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
NSDictionary *params = #{#"email":emailfield.text};
[manager GET:#"http://example.com/api" parameters:params success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"JSON: %#", responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"Error: %#", error);
}];
While everyone else is right -- you should be using the modern AFNetworking constructs instead of the legacy features -- there is a quick way to get done what you're looking to get done.
By the looks of it, the method - (??? *) HTTPRequestOperationWithRequest:success:failure likely returns an AFHTTPRequestOperation. If I'm correct, you just need to actually start the operation. See below for your code, corrected.
NSURL *url = [NSURL URLWithString:[NSString stringWithFormat:#"https://twitter.com/%#", username]];
NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:url];
[request setValue:#"MyUserAgent (iPhone; iOS 7.0.2; gzip)" forHTTPHeaderField:#"User-Agent"];
[request setHTTPMethod:#"GET"];
AFHTTPRequestOperation *op = [self.manager HTTPRequestOperationWithRequest:request success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSString *html = [[NSString alloc] initWithData:responseObject encoding:NSUTF8StringEncoding];
if ([html containsString:#"var h = decodeURI(l.hash.substr(1)).toLowerCase();"]) {
completion(YES, nil);
} else {
completion(NO, nil);
}
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
completion(NO, error);
}];
[op start];
HTTPRequestOperationWithRequest method returns AFHTTPRequestOperation. You have to add it to some operation queue to start it. For example
AFHTTPRequestOperation *operation = [self.manager HTTPRequestOperationWithRequest:request .........
[[NSOperationQueue currentQueue] addOperation:operation];
You can use AFHTTPSessionManager which is a little better than AFHTTPRequestOperationManager and cancel requests using method cancel of NSURLSessionDataTask. You can find some code examples here - AFNetworking 2.0 cancel specific task
Check this will work
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
manager.responseSerializer.acceptableContentTypes = [NSSet setWithObjects:#"application/json", nil];
manager.requestSerializer = [AFJSONRequestSerializer serializer];
[manager POST:url parameters:parameters success:^(AFHTTPRequestOperation *operation, id responseObject) {
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
}];
i am really new to IOS developments..i just want to get some JSON response from my web service. when i searched about it i found AFnetworking is good for that. so i downloaded it and did a sample application. but i need to pass some parameters to the service . my service takes two parameters [username and password]. my url like this
http://myweb.mobile.com/WebServices/AppointmentService.asmx/GetValidUser
can anyone please give me some code sample how to pass my parameters to this service to get json response ?
i have tried this code.. but it wont take parameters.. some people telling about AFHTTPClient.. but im using AFN 2.0.. there is no class call AFHTTPCLient here .. i'm so conduced here....please help me
NSURL *url = [NSURL URLWithString:#"https://maps.googleapis.com/maps/api/place/textsearch/json?query=restuarants+in+sydney&sensor=false&key=AIzaSyDn9a-EvJ875yMxZeINmUP7CwbO9YT1w2s"];
NSURLRequest *request = [NSURLRequest requestWithURL:url];
// 2
AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc] initWithRequest:request];
operation.responseSerializer = [AFJSONResponseSerializer serializer];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject) {
// 3
self.googlePlaces = [responseObject objectForKey:#"results"];
[self.tableView reloadData];
// NSLog(#"JSON RESULT %#", responseObject);
self.weather = (NSDictionary *)responseObject;
self.title = #"JSON Retrieved";
[self.tableView reloadData];
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
// 4
UIAlertView *alertView = [[UIAlertView alloc] initWithTitle:#"Error Retrieving Weather"
message:[error localizedDescription]
delegate:nil
cancelButtonTitle:#"Ok"
otherButtonTitles:nil];
[alertView show];
}];
// 5
[operation start];
EDIT :
i have sloved my problem using below code segments...
NSDictionary *parameters = [[NSDictionary alloc] initWithObjectsAndKeys:#"47", #"caregiverPersonId", nil];
AFSecurityPolicy *policy = [[AFSecurityPolicy alloc] init];
[policy setAllowInvalidCertificates:YES];
AFHTTPRequestOperationManager *operationManager = [AFHTTPRequestOperationManager manager];
[operationManager setSecurityPolicy:policy];
operationManager.requestSerializer = [AFJSONRequestSerializer serializer];
operationManager.responseSerializer = [AFJSONResponseSerializer serializer];
[operationManager POST:#"your full url goes here"
parameters:parameters
success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"JSON: %#", [responseObject description]);
}
failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"Error: %#", [error description]);
}
];
Try this
-(void)login
{
NSMutableDictionary *dict=[[NSMutableDictionary alloc]initWithCapacity:3];
[dict setObject:_usernameTextField.text forKey:#"userName"];
[dict setObject:_passwordTextField.text forKey:#"password"];
AFHTTPClient *client=[[AFHTTPClient alloc]initWithBaseURL:[NSURL URLWithString:#""]];
[client registerHTTPOperationClass:[AFJSONRequestOperation class]];
[client setDefaultHeader:#"Accept" value:#"application/json"];
client.parameterEncoding = AFJSONParameterEncoding;
[client postPath:#"GetValidUser" parameters:dict success:^(AFHTTPRequestOperation *operation, id responseObject)
{
NSDictionary *op=(NSDictionary *)responseObject;
NSLog(#"%#",op);
}
failure:^(AFHTTPRequestOperation *operation, NSError *error) {
UIAlertView *alert=[[UIAlertView alloc]initWithTitle:MESSAGE_EN message:#"Unable to login. Please try again." delegate:self cancelButtonTitle:OK_EN otherButtonTitles:nil, nil];
[alert show];
NSLog(#"error.localizedDescription %#",error.localizedDescription);
}];
}
Note : Please do fill the fields with proper values and try.
dict is the Input postdata
I got this one from somewhere in SO question. See this:
- (IBAction)loginButtonPressed {
NSURL *baseURL = [NSURL URLWithString:#"http://myweb.mobile.com/WebServices/AppointmentService.asmx"];
//build normal NSMutableURLRequest objects
//make sure to setHTTPMethod to "POST".
//from https://github.com/AFNetworking/AFNetworking
AFHTTPClient *httpClient = [[AFHTTPClient alloc] initWithBaseURL:baseURL];
[httpClient defaultValueForHeader:#"Accept"];
NSDictionary *params = [NSDictionary dictionaryWithObjectsAndKeys:
[usernameTextField text], kUsernameField,
[passwordTextField text], kPasswordField,
nil];
NSMutableURLRequest *request = [httpClient requestWithMethod:#"POST"
path:#"http://myweb.mobile.com/WebServices/AppointmentService.asmx/GetValidUser" parameters:params];
//Add your request object to an AFHTTPRequestOperation
AFHTTPRequestOperation *operation = [[[AFHTTPRequestOperation alloc]
initWithRequest:request] autorelease];
//"Why don't I get JSON / XML / Property List in my HTTP client callbacks?"
//see: https://github.com/AFNetworking/AFNetworking/wiki/AFNetworking-FAQ
//mattt's suggestion http://stackoverflow.com/a/9931815/1004227 -
//-still didn't prevent me from receiving plist data
//[httpClient registerHTTPOperationClass:
// [AFPropertyListParameterEncoding class]];
[httpClient registerHTTPOperationClass:[AFHTTPRequestOperation class]];
[operation setCompletionBlockWithSuccess:
^(AFHTTPRequestOperation *operation,
id responseObject) {
NSString *response = [operation responseString];
NSLog(#"response: [%#]",response);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"error: %#", [operation error]);
}];
//call start on your request operation
[operation start];
[httpClient release];
}
Hope this helps .. :)
EDIT
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
[manager POST:URLString parameters:nil constructingBodyWithBlock:^(id<AFMultipartFormData> formData) {
[formData appendPartWithFormData:[email dataUsingEncoding:NSUTF8StringEncoding]
name:#"email"];
[formData appendPartWithFormData:[pass dataUsingEncoding:NSUTF8StringEncoding]
name:#"password"];
// etc.
} success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"Response: %#", responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"Error: %#", error);
}];
Use below code
NSDictionary *paramDictionary = [NSDictionary dictionaryWithObjectsAndKeys:#"first_Object",#"first_Key",#"second_Object",#"second_Key" nil];
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
[manager POST:#"YOUR_URL_STRING" parameters:paramDictionary success:^(AFHTTPRequestOperation *operation, id responseObject) {Success responce} failure:^(AFHTTPRequestOperation *operation, NSError *error) {failure responce}];
if you want you can set
manager.responseSerializer = [AFJSONResponseSerializer serializer];
manager.requestSerializer = [AFJSONRequestSerializer serializer];
manager.securityPolicy.allowInvalidCertificates = YES;
My problem is that I have a old code and I dont know how to change it.
I had 1 class called API (AFHTTPClient) I have problems with 2 methods because I dont know how to put them in 2.0:
This:
-(void)commandWithParams:(NSMutableDictionary*)params onCompletion:(JSONResponseBlock)completionBlock
{
NSMutableURLRequest *apiRequest =
[self multipartFormRequestWithMethod:#"POST"
path:kAPIPath
parameters:params
constructingBodyWithBlock: ^(id formData) {
//TODO: attach file if needed
}];
AFJSONRequestOperation* operation = [[AFJSONRequestOperation alloc] initWithRequest: apiRequest];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject) {
//success!
completionBlock(responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
//failure :(
completionBlock([NSDictionary dictionaryWithObject:[error localizedDescription] forKey:#"error"]);
}];
[operation start];
}
and this:
#pragma mark - init
//intialize the API class with the destination host name
-(API*)init
{
//call super init
self = [super init];
if (self != nil) {
//initialize the object
user = nil;
[self registerHTTPOperationClass:[AFJSONRequestOperation class]];
// Accept HTTP Header; see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.1
[self setDefaultHeader:#"Accept" value:#"application/json"];
}
return self;
}
I do a new class called Api, now (AFHTTPRequestOperationManager) is good?
I try with this, but I dont have idea
-(API*)init
{//call super init
self = [super init];
//initialize the object
if (self != nil) {
//initialize the object
user = nil;
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
manager.requestSerializer = [AFJSONRequestSerializer serializer];
AFJSONRequestSerializer *a=[AFJSONRequestSerializer serializer];
[a setValue:#"Accept" forHTTPHeaderField:#"application/json"];
[a setValue:#"application/json" forHTTPHeaderField:#"Content-Type"];
[a setValue:#"content-Type" forHTTPHeaderField:#"text/html"];
[a setValue : # "text / html; charset = UTF-8" forHTTPHeaderField : # "Content-Type" ];
}
return self;
}
-(void)commandWithParams:(NSMutableDictionary*)params onCompletion:(JSONResponseBlock)completionBlock
{
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
NSDictionary *parameters = params;
NSURL *filePath = [NSURL URLWithString:#"http://162.243.199.147/mujeresquecorren/iReporter/index.php"];
[manager POST:#"api" parameters:parameters constructingBodyWithBlock:^(id<AFMultipartFormData> formData) {
[formData appendPartWithFileURL:filePath name:#"api" error:nil];
} success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"Success: %#", responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"Error: %#", error);
}];
NSMutableURLRequest *apiRequest = [NSMutableURLRequest requestWithURL:filePath];
AFJSONRequestSerializer *requestSerializer = [AFJSONRequestSerializer serializer];
[requestSerializer setValue:#"application/json" forHTTPHeaderField:#"Content-Type"];
[requestSerializer setValue:#"application/json" forHTTPHeaderField:#"Accept"];
// operationManagerInstance.requestSerializer = requestSerializer;
AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc]
initWithRequest:apiRequest];
operation.responseSerializer = [AFJSONResponseSerializer serializer];
manager.responseSerializer = [AFJSONResponseSerializer serializer];
[manager POST:#"http://162.243.199.147/mujeresquecorren/iReporter/index.php" parameters:nil success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"%#", responseObject);
} failure:nil];
// AFJSONRequestOperation* operation = [[AFJSONRequestOperation alloc] initWithRequest: apiRequest];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject) {
//success!
completionBlock(responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
//failure :(
completionBlock([NSDictionary dictionaryWithObject:[error localizedDescription] forKey:#"error"]);
}];
[operation start];
}
and this is one of the errors:
rror: Error Domain=NSURLErrorDomain Code=-1002 "unsupported URL" UserInfo=0xa64f980 {NSErrorFailingURLStringKey=api, NSErrorFailingURLKey=api, NSLocalizedDescription=unsupported URL, NSUnderlyingError=0xa782e10 "unsupported URL"}
Please help, im going to be crazy with that and I need that my code works in my app!
Thanks a lot!!!!
It's all there in the error message. "api" isn't a valid URL. You need to either specify an absolute URL, or initialize your request operation manager with a baseURL, using initWithBaseURL:.
I am updating an old application code which used ASIHTTPRequest with AFNetworking. In my case, I am sending a bench of data to API, these data are different types: Image and other.
Here is the code I adopt so far, implementing an API client, requesting a shared instance, prepare the params dictionary and send it to remote API:
NSMutableDictionary *params = [NSMutableDictionary dictionary];
[params setValue:#"Some value" forKey:aKey];
[[APIClient sharedInstance]
postPath:#"/post"
parameters:params success:^(AFHTTPRequestOperation *operation, id responseObject) {
//some logic
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
//handle error
}];
What would be the case when I want to add an image to the params dictionary?
With ASIHTTPRequest, I used to do the following:
NSData *imgData = UIImagePNGRepresentation(anImage);
NSString *newStr = [anImageName stringByReplacingOccurrencesOfString:#"/"
withString:#"_"];
[request addData:imgData
withFileName:[NSString stringWithFormat:#"%#.png",newStr]
andContentType:#"image/png"
forKey:anOtherKey];
I digged into AFNetworking documentation and found they appending the image in an NSMutableRequest like this:
AFHTTPClient *httpClient = [[AFHTTPClient alloc] initWithBaseURL:url];
NSData *imageData = UIImageJPEGRepresentation([UIImage imageNamed:#"avatar.jpg"], 0.5);
NSMutableURLRequest *request = [httpClient multipartFormRequestWithMethod:#"POST" path:#"/upload" parameters:nil constructingBodyWithBlock: ^(id <AFMultipartFormData>formData) {
[formData appendPartWithFileData:imageData name:#"avatar" fileName:#"avatar.jpg" mimeType:#"image/jpeg"];
}];
How should I mix this together on a neat way to integrate my image data into the APIClient request? Thanx in advance.
I have used same AFNetworking to upload image with some parameter. This code is fine working for me. May be it will help out
NSData *imageToUpload = UIImageJPEGRepresentation(uploadedImgView.image, 1.0);//(uploadedImgView.image);
if (imageToUpload)
{
NSDictionary *parameters = [NSDictionary dictionaryWithObjectsAndKeys:keyParameter, #"keyName", nil];
AFHTTPClient *client= [AFHTTPClient clientWithBaseURL:[NSURL URLWithString:#"http://------"]];
NSMutableURLRequest *request = [client multipartFormRequestWithMethod:#"POST" path:#"API name as you have" parameters:parameters constructingBodyWithBlock: ^(id <AFMultipartFormData>formData) {
[formData appendPartWithFileData: imageToUpload name:#"image" fileName:#"temp.jpeg" mimeType:#"image/jpeg"];
}];
AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc] initWithRequest:request];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject)
{
NSDictionary *jsons = [NSJSONSerialization JSONObjectWithData:responseObject options:kNilOptions error:nil];
//NSLog(#"response: %#",jsons);
}
failure:^(AFHTTPRequestOperation *operation, NSError *error)
{
if([operation.response statusCode] == 403)
{
//NSLog(#"Upload Failed");
return;
}
//NSLog(#"error: %#", [operation error]);
}];
[operation start];
}
Good Luck !!
With AFNetworking 2.0.1 this code worked for me.
-(void) saveImage: (NSData *)imageData forImageName: (NSString *) imageName {
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
NSString *imagePostUrl = [NSString stringWithFormat:#"%#/v1/image", BASE_URL];
NSDictionary *parameters = #{#"imageName": imageName};
NSMutableURLRequest *request = [[AFHTTPRequestSerializer serializer] multipartFormRequestWithMethod:#"POST" URLString:imagePostUrl parameters:parameters constructingBodyWithBlock:^(id<AFMultipartFormData> formData) {
[formData appendPartWithFileData:imageData name:#"image" fileName:imageName mimeType:#"image/jpeg"];
}];
AFHTTPRequestOperation *op = [manager HTTPRequestOperationWithRequest:request success: ^(AFHTTPRequestOperation *operation, id responseObject) {
DLog(#"response: %#", responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
DLog(#"Error: %#", error);
}];
op.responseSerializer = [AFHTTPResponseSerializer serializer];
[[NSOperationQueue mainQueue] addOperation:op];
}
If JSON response is needed use:
op.responseSerializer = [AFJSONResponseSerializer serializer];
instead of
op.responseSerializer = [AFHTTPResponseSerializer serializer];
Here's the problem :
I want to upload image immediately after finish choosing image from imagepicker.
So, I put my code to upload image using afnetworking in imagepicker delegate method.
But it doesn't response anything.
//set the imageview to current image after choosing
profilePic.image = image;
//dismiss the imagepicker
[picker dismissModalViewControllerAnimated:YES];
//start upload image code
NSDictionary *params = [NSDictionary dictionaryWithObjectsAndKeys:
#"steventi1901", #"username",
UIImagePNGRepresentation(profilePic.image), #"profile_pic",
nil];
AFHTTPClient *client = [[AFHTTPClient alloc] initWithBaseURL:updateProfile];
NSData *imageToUpload = UIImagePNGRepresentation(profilePic.image);
NSMutableURLRequest *request = [client multipartFormRequestWithMethod:#"PUT" path:#"" parameters:params
constructingBodyWithBlock: ^(id <AFMultipartFormData>formData) {
[formData appendPartWithFileData: imageToUpload name:#"file" fileName:#"temp.png" mimeType:#"image/png"];
//NSLog(#"dalem");
}];
AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc] initWithRequest:request];
[operation setCompletionBlockWithSuccess:^(AFHTTPRequestOperation *operation, id responseObject) {
NSString *response = [operation responseString];
NSLog(#"response: [%#]",response);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
if([operation.response statusCode] == 403){
NSLog(#"Upload Failed");
return;
}
NSLog(#"error: %#", [operation error]);
}];
[operation start];
//end upload image code
It really didn't response anything so i didn't know if the process fail or success.
Best and Easy way to upload Image using Afnetworking.
Please use below AFNetworking.
pod 'AFNetworking', '~> 2.5.4'
//Create manager
AFHTTPRequestOperationManager *manager = [AFHTTPRequestOperationManager manager];
//parameters if any
NSMutableDictionary *AddPost = [[NSMutableDictionary alloc]init];
[AddPost setValue:#"Addparma" forKey:#"param"];
NSString * url = [NSString stringWithFormat:#"www.addyourmainurl.com"];;
NSLog(#"AddPost %#",AddPost);
[manager POST:url parameters:[AddPost copy] constructingBodyWithBlock:^(id<AFMultipartFormData> formData) {
//add image data one by one
for(int i=0; i<[Array count];i++)
{
UIImage *eachImage = [Array objectAtIndex:i];
NSData *imageData = UIImageJPEGRepresentation(eachImage,0.5);
[formData appendPartWithFileData:imageData name:[NSString stringWithFormat:#"image%d",i] fileName:[NSString stringWithFormat:#"image%d.jpg",i ] mimeType:#"image/jpeg"];
}
} success:^(AFHTTPRequestOperation *operation, id responseObject) {
NSLog(#"Success: %#", responseObject);
} failure:^(AFHTTPRequestOperation *operation, NSError *error) {
NSLog(#"Error: %#", error);
}];
have you set the delegate of the picker?
[yourPicker setDelegate:self]