I am tryng to get rid of shortcodes inside a Google Sheet column. I have many items such as [spacer type="1" height="20"][spacer] or [FinalTilesGallery id="37"] I just would like to cancel them. Is there any simple way to do it?
Thanks !
For in-place replacement, the quick option would be to use the Find and Replace dialog (Ctrl + H) with Search Using Regular Expressions turned on, which is more powerful than your standard Find and Replace.
Find: \[.*?\] - Match anything within an open-bracket up to the very next close-bracket. This should work assuming you have no nested brackets, e.g. [[no][no]].
If you do have nested brackets, you'll have to change this to \[[^\[\]]*\]. And continue to Replace All until all the codes are gone.
Replace: Nothing.
Replace All. If you don't want to affect other sheets that may be in your document, make sure you select the right range to work with, too.
This just erases everything within the brackets.
If you want to erase any redundant spaces left by this, simply Find and Replace again (with Regular Expressions) on + (space and plus), which will match 1 or more spaces and replace with (single space).
E.g.:
string [] [] string2 -> string string2 after the shortcode replacement.
After replacing spaces, it will become string string2.
Let's say your original strings are in the range A2:A. Place the following into B2 of an otherwise completely empty Column B (or the second cell of any other empty column):
=ArrayFormula(IF(A2:A="",,TRIM(REGEXREPLACE(A2:A,"\[[^\[\]]+\]",""))))
I can't see your data, so I don't know what kind of information is between these shortcodes. If you find that this leaves you with concatenated pieces of data where there should be spaces between them, replace the above with this version:
=ArrayFormula(IF(A2:A="",,TRIM(REGEXREPLACE(SUBSTITUTE(SUBSTITUTE(A2:A,"["," ["),"]","] "),"\[[^\[\]]+\]",""))))
I can't teach regular expression language here. But I will note that, since square brackets have specific meaning within regex, your literal square brackets must be indicated with the escape character: the backslash.
Here is the regex expression alone:
\[[^\[\]]+\]
The opening \[ and the closing \], then, reference your actual opening and closing bracket sets. If we remove those, we have this left:
[^\[\]]+
Again, you see the escaped opening and closing square brackets, which I'll replace with the word these:
[^these]+
What remains there are opening and closing brackets with regex meaning, i.e., "anything in this group." And the circumflex symbol ^ as the first character within this set of square brackets means "anything except." The + symbol means "in any string length of one or more characters."
So that whole regex expression then reads: "A literal open square bracket, followed by one or more characters that are anything except square brackets, ending with a literal closing square bracket."
And we are REGEXREPLACE-ing any instance of that with "" (i.e., nothing).
https://regex101.com/r/sB9wW6/1
(?:(?<=\s)|^)#(\S+) <-- the problem in positive lookbehind
Working like this on prod: (?:\s|^)#(\S+), but I need a correct start index (without space).
Here is in JS:
var regex = new RegExp(/(?:(?<=\s)|^)#(\S+)/g);
Error parsing regular expression: Invalid regular expression:
/(?:(?<=\s)|^)#(\S+)/
What am I doing wrong?
UPDATE
Ok, no lookbehind in JS :(
But anyways, I need a regex to get the proper start and end index of my match. Without leading space.
Make sure you always select the right regex engine at regex101.com. See an issue that occurred due to using a JS-only compatible regex with [^] construct in Python.
JS regex - at the time of answering this question - did not support lookbehinds. Now, it becomes more and more adopted after its introduction in ECMAScript 2018. You do not really need it here since you can use capturing groups:
var re = /(?:\s|^)#(\S+)/g;
var str = 's #vln1\n#vln2\n';
var res = [];
while ((m = re.exec(str)) !== null) {
res.push(m[1]);
}
console.log(res);
The (?:\s|^)#(\S+) matches a whitespace or the start of string with (?:\s|^), then matches #, and then matches and captures into Group 1 one or more non-whitespace chars with (\S+).
To get the start/end indices, use
var re = /(\s|^)#\S+/g;
var str = 's #vln1\n#vln2\n';
var pos = [];
while ((m = re.exec(str)) !== null) {
pos.push([m.index+m[1].length, m.index+m[0].length]);
}
console.log(pos);
BONUS
My regex works at regex101.com, but not in...
First of all, have you checked the Code Generator link in the Tools pane on the left?
All languages - "Literal string" vs. "String literal" alert - Make sure you test against the same text used in code, literal string, at the regex tester. A common scenario is copy/pasting a string literal value directly into the test string field, with all string escape sequences like \n (line feed char), \r (carriage return), \t (tab char). See Regex_search c++, for example. Mind that they must be replaced with their literal counterparts. So, if you have in Python text = "Text\n\n abc", you must use Text, two line breaks, abc in the regex tester text field. Text.*?abc will never match it although you might think it "works". Yes, . does not always match line break chars, see How do I match any character across multiple lines in a regular expression?
All languages - Backslash alert - Make sure you correctly use a backslash in your string literal, in most languages, in regular string literals, use double backslash, i.e. \d used at regex101.com must written as \\d. In raw string literals, use a single backslash, same as at regex101. Escaping word boundary is very important, since, in many languages (C#, Python, Java, JavaScript, Ruby, etc.), "\b" is used to define a BACKSPACE char, i.e. it is a valid string escape sequence. PHP does not support \b string escape sequence, so "/\b/" = '/\b/' there.
All languages - Default flags - Global and Multiline - Note that by default m and g flags are enabled at regex101.com. So, if you use ^ and $, they will match at the start and end of lines correspondingly. If you need the same behavior in your code check how multiline mode is implemented and either use a specific flag, or - if supported - use an inline (?m) embedded (inline) modifier. The g flag enables multiple occurrence matching, it is often implemented using specific functions/methods. Check your language reference to find the appropriate one.
line-breaks - Line endings at regex101.com are LF only, you can't test strings with CRLF endings, see regex101.com VS myserver - different results. Solutions can be different for each regex library: either use \R (PCRE, Java, Ruby) or some kind of \v (Boost, PCRE), \r?\n, (?:\r\n?|\n)/(?>\r\n?|\n) (good for .NET) or [\r\n]+ in other libraries (see answers for C#, PHP). Another issue related to the fact that you test your regex against a multiline string (not a list of standalone strings/lines) is that your patterns may consume the end of line, \n, char with negated character classes, see an issue like that. \D matched the end of line char, and in order to avoid it, [^\d\n] could be used, or other alternatives.
php - You are dealing with Unicode strings, or want shorthand character classes to match Unicode characters, too (e.g. \w+ to match Стрибижев or Stribiżew, or \s+ to match hard spaces), then you need to use u modifier, see preg_match() returns 0 although regex testers work - To match all occurrences, use preg_match_all, not preg_match with /...pattern.../g, see PHP preg_match to find multiple occurrences and "Unknown modifier 'g' in..." when using preg_match in PHP?- Your regex with inline backreference like \1 refuses to work? Are you using a double quoted string literal? Use a single-quoted one, see Backreference does not work in PHP
phplaravel - Mind you need the regex delimiters around the pattern, see https://stackoverflow.com/questions/22430529
python - Note that re.search, re.match, re.fullmatch, re.findall and re.finditer accept the regex as the first argument, and the input string as the second argument. Not re.findall("test 200 300", r"\d+"), but re.findall(r"\d+", "test 200 300"). If you test at regex101.com, please check the "Code Generator" page. - You used re.match that only searches for a match at the start of the string, use re.search: Regex works fine on Pythex, but not in Python - If the regex contains capturing group(s), re.findall returns a list of captures/capture tuples. Either use non-capturing groups, or re.finditer, or remove redundant capturing groups, see re.findall behaves weird - If you used ^ in the pattern to denote start of a line, not start of the whole string, or used $ to denote the end of a line and not a string, pass re.M or re.MULTILINE flag to re method, see Using ^ to match beginning of line in Python regex
- If you try to match some text across multiple lines, and use re.DOTALL or re.S, or [\s\S]* / [\s\S]*?, and still nothing works, check if you read the file line by line, say, with for line in file:. You must pass the whole file contents as the input to the regex method, see Getting Everything Between Two Characters Across New Lines. - Having trouble adding flags to regex and trying something like pattern = r"/abc/gi"? See How to add modifers to regex in python?
c#, .net - .NET regex does not support possessive quantifiers like ++, *+, ??, {1,10}?, see .NET regex matching digits between optional text with possessive quantifer is not working - When you match against a multiline string and use RegexOptions.Multiline option (or inline (?m) modifier) with an $ anchor in the pattern to match entire lines, and get no match in code, you need to add \r? before $, see .Net regex matching $ with the end of the string and not of line, even with multiline enabled - To get multiple matches, use Regex.Matches, not Regex.Match, see RegEx Match multiple times in string - Similar case as above: splitting a string into paragraphs, by a double line break sequence - C# / Regex Pattern works in online testing, but not at runtime - You should remove regex delimiters, i.e. #"/\d+/" must actually look like #"\d+", see Simple and tested online regex containing regex delimiters does not work in C# code - If you unnecessarily used Regex.Escape to escape all characters in a regular expression (like Regex.Escape(#"\d+\.\d+")) you need to remove Regex.Escape, see Regular Expression working in regex tester, but not in c#
dartflutter - Use raw string literal, RegExp(r"\d"), or double backslashes (RegExp("\\d")) - https://stackoverflow.com/questions/59085824
javascript - Double escape backslashes in a RegExp("\\d"): Why do regex constructors need to be double escaped?
- (Negative) lookbehinds unsupported by most browsers: Regex works on browser but not in Node.js - Strings are immutable, assign the .replace result to a var - The .replace() method does change the string in place - Retrieve all matches with str.match(/pat/g) - Regex101 and Js regex search showing different results or, with RegExp#exec, RegEx to extract all matches from string using RegExp.exec- Replace all pattern matches in string: Why does javascript replace only first instance when using replace?
javascriptangular - Double the backslashes if you define a regex with a string literal, or just use a regex literal notation, see https://stackoverflow.com/questions/56097782
java - Word boundary not working? Make sure you use double backslashes, "\\b", see Regex \b word boundary not works - Getting invalid escape sequence exception? Same thing, double backslashes - Java doesn't work with regex \s, says: invalid escape sequence - No match found is bugging you? Run Matcher.find() / Matcher.matches() - Why does my regex work on RegexPlanet and regex101 but not in my code? - .matches() requires a full string match, use .find(): Java Regex pattern that matches in any online tester but doesn't in Eclipse - Access groups using matcher.group(x): Regex not working in Java while working otherwise - Inside a character class, both [ and ] must be escaped - Using square brackets inside character class in Java regex - You should not run matcher.matches() and matcher.find() consecutively, use only if (matcher.matches()) {...} to check if the pattern matches the whole string and then act accordingly, or use if (matcher.find()) to check if there is a single match or while (matcher.find()) to find multiple matches (or Matcher#results()). See Why does my regex work on RegexPlanet and regex101 but not in my code?
scala - Your regex attempts to match several lines, but you read the file line by line (e.g. use for (line <- fSource.getLines))? Read it into a single variable (see matching new line in Scala regex, when reading from file)
kotlin - You have Regex("/^\\d+$/")? Remove the outer slashes, they are regex delimiter chars that are not part of a pattern. See Find one or more word in string using Regex in Kotlin - You expect a partial string match, but .matchEntire requires a full string match? Use .find, see Regex doesn't match in Kotlin
mongodb - Do not enclose /.../ with single/double quotation marks, see mongodb regex doesn't work
c++ - regex_match requires a full string match, use regex_search to find a partial match - Regex not working as expected with C++ regex_match - regex_search finds the first match only. Use sregex_token_iterator or sregex_iterator to get all matches: see What does std::match_results::size return? - When you read a user-defined string using std::string input; std::cin >> input;, note that cin will only get to the first whitespace, to read the whole line properly, use std::getline(std::cin, input); - C++ Regex to match '+' quantifier - "\d" does not work, you need to use "\\d" or R"(\d)" (a raw string literal) - This regex doesn't work in c++ - Make sure the regex is tested against a literal text, not a string literal, see Regex_search c++
go - Double backslashes or use a raw string literal: Regular expression doesn't work in Go - Go regex does not support lookarounds, select the right option (Go) at regex101.com before testing! Regex expression negated set not working golang
groovy - Return all matches: Regex that works on regex101 does not work in Groovy
r - Double escape backslashes in the string literal: "'\w' is an unrecognized escape" in grep - Use perl=TRUE to PCRE engine ((g)sub/(g)regexpr): Why is this regex using lookbehinds invalid in R?
oracle - Greediness of all quantifiers is set by the first quantifier in the regex, see Regex101 vs Oracle Regex (then, you need to make all the quantifiers as greedy as the first one)] - \b does not work? Oracle regex does not support word boundaries at all, use workarounds as shown in Regex matching works on regex tester but not in oracle
firebase - Double escape backslashes, make sure ^ only appears at the start of the pattern and $ is located only at the end (if any), and note you cannot use more than 9 inline backreferences: Firebase Rules Regex Birthday
firebasegoogle-cloud-firestore - In Firestore security rules, the regular expression needs to be passed as a string, which also means it shouldn't be wrapped in / symbols, i.e. use allow create: if docId.matches("^\\d+$").... See https://stackoverflow.com/questions/63243300
google-data-studio - /pattern/g in REGEXP_REPLACE must contain no / regex delimiters and flags (like g) - see How to use Regex to replace square brackets from date field in Google Data Studio?
google-sheets - If you think REGEXEXTRACT does not return full matches, truncates the results, you should check if you have redundant capturing groups in your regex and remove them, or convert the capturing groups to non-capturing by add ?: after the opening (, see Extract url domain root in Google Sheet
sed - Why does my regular expression work in X but not in Y?
word-boundarypcrephp - [[:<:]] and [[:>:]] do not work in the regex tester, although they are valid constructs in PCRE, see https://stackoverflow.com/questions/48670105
snowflake-cloud-data-platform snowflake-sql - If you are writing a stored procedure, and \\d does not work, you need to double them again and use \\\\d, see REGEX conversion of VARCHAR value to DATE in Snowflake stored procedure using RLIKE not consistent.
Hi I've been struggling with this for the last hour and am no closer. How exactly do I strip everything except numbers, commas and decimal points from a rails string? The closest I have so far is:-
rate = rate.gsub!(/[^0-9]/i, '')
This strips everything but the numbers. When I try add commas to the expression, everything is getting stripped. I got the aboves from somewhere else and as far as I can gather:
^ = not
Everything to the left of the comma gets replaced by what's in the '' on the right
No idea what the /i does
I'm very new to gsub. Does anyone know of a good tutorial on building expressions?
Thanks
Try:
rate = rate.gsub(/[^0-9,\.]/, '')
Basically, you know the ^ means not when inside the character class brackets [] which you are using, and then you can just add the comma to the list. The decimal needs to be escaped with a backslash because in regular expressions they are a special character that means "match anything".
Also, be aware of whether you are using gsub or gsub!
gsub! has the bang, so it edits the instance of the string you're passing in, rather than returning another one.
So if using gsub! it would be:
rate.gsub!(/[^0-9,\.]/, '')
And rate would be altered.
If you do not want to alter the original variable, then you can use the version without the bang (and assign it to a different var):
cleaned_rate = rate.gsub!(/[^0-9,\.]/, '')
I'd just google for tutorials. I haven't used one. Regexes are a LOT of time and trial and error (and table-flipping).
This is a cool tool to use with a mini cheat-sheet on it for ruby that allows you to quickly edit and test your expression:
http://rubular.com/
You can just add the comma and period in the square-bracketed expression:
rate.gsub(/[^0-9,.]/, '')
You don't need the i for case-insensitivity for numbers and symbols.
There's lots of info on regular expressions, regex, etc. Maybe search for those instead of gsub.
You can use this:
rate = rate.gsub!(/[^0-9\.\,]/g,'')
Also check this out to learn more about regular expressions:
http://www.regexr.com/
I need to generate things like"
F||;||(,t,t)".
I try parse("F__||;|(,t,t)"). Maple returns "Error, incorrect syntax in parse: ; unexpected (near 6th character of parsed string)"
Is there any way to get this F||;||(,t,t)"?
To create names with special characters, you need to use single back quotes (also known as accent grave), which is the character under escape on most US keyboards.
parse("`F__||;||`(``,t,t)");
Could anybody help me make a proper regular expression from a bunch of text in Ruby. I tried a lot but I don't know how to handle variable length titles.
The string will be of format <sometext>title:"<actual_title>"<sometext>. I want to extract actual_title from this string.
I tried /title:"."/ but it doesnt find any matches as it expects a closing quotation after one variable from opening quotation. I couldn't figure how to make it check for variable length of string. Any help is appreciated. Thanks.
. matches any single character. Putting + after a character will match one or more of those characters. So .+ will match one or more characters of any sort. Also, you should put a question mark after it so that it matches the first closing-quotation mark it comes across. So:
/title:"(.+?)"/
The parentheses are necessary if you want to extract the title text that it matched out of there.
/title:"([^"]*)"/
The parentheses create a capturing group. Inside is first a character class. The ^ means it's negated, so it matches any character that's not a ". The * means 0 or more. You can change it to one or more by using + instead of *.
I like /title:"(.+?)"/ because of it's use of lazy matching to stop the .+ consuming all text until the last " on the line is found.
It won't work if the string wraps lines or includes escaped quotes.
In programming languages where you want to be able to include the string deliminator inside a string you usually provide an 'escape' character or sequence.
If your escape character was \ then you could write something like this...
/title:"((?:\\"|[^"])+)"/
This is a railroad diagram. Railroad diagrams show you what order things are parsed... imagine you are a train starting at the left. You consume title:" then \" if you can.. if you can't then you consume not a ". The > means this path is preferred... so you try to loop... if you can't you have to consume a '"' to finish.
I made this with https://regexper.com/#%2Ftitle%3A%22((%3F%3A%5C%5C%22%7C%5B%5E%22%5D)%2B)%22%2F
but there is now a plugin for Atom text editor too that does this.