I have a CollectionViewCell where i want to add a imageView. This imageView should be set to exact size, so it is proportional without cutting, something out of the image by resizing. How can i do this? Do i need to do it programmatically or can it be done in autolayout?
The example of this is the images on this picture below. where they have the exaact height as the images?
You can add constraint at runtime programmatically.
By calculating image's height and width and than add constraint for it's height and width.
Constraint for it's X and Y should be set before this
[imageView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:[myView(==width)]"
options:0
metrics:nil
views:NSDictionaryOfVariableBindings(imageView)]];
[imageView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:[myView(==height)]"
options:0
metrics:nil
views:NSDictionaryOfVariableBindings(imageView)]];
Related
I am trying to create a UILabel inside a UIImageView but it doesn't fit correctly into the UIImageView bounds. I can set it fine when running in portrait, but when I turn the device to landscape it seems to lose the orientation and it appears outside the UIImageView.
Is there some way to clip the UILabel into the UIImageView?
You can achieve it by adding appropriate constraints to both your label and imageview. Here's a sample code which fixes your label from left, right and bottom of imageview :
// align yourLabel from the left and right
[yourImageview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[yourLabel]-0-|" options:0 metrics:nil views:NSDictionaryOfVariableBindings(yourLabel)]];
// align yourLabel from the bottom
[yourImageview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:[yourLabel]-0-|" options:0 metrics:nil views:NSDictionaryOfVariableBindings(yourLabel)]];
In my application I'm using ScrollView to show full size images horizontally and its running perfect in Portrait mode but when I shift it to Landscape mode then the width of scrollview doesn't update.
Lets say I've 4 images and width of each image is 568 in Landscape mode so the total width of UIScrollView should be 2272 and actually it is. but it only show content of width 1136 i.e. 2.5 out of 4. And If I go to previous view and reload this view in Landscape then scrollview shows all the contents within its width (2272).
Here is my Views hierarchy:
I'm adding constraints as follow:
[mainScrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:[NSString stringWithFormat:#"V:|[imgView(%f)]|", self.view.frame.size.height]
options:kNilOptions
metrics:nil
views:views]];
[mainScrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:[NSString stringWithFormat:#"H:|[imgView(%d)]|", width_size]
options:kNilOptions
metrics:nil
views:views]];
[mainScrollView updateConstraints];
where width_size = 2272
You can find my Code there :
https://drive.google.com/file/d/0B1noH4KPfAePTVVNb3lhZXlmZzA/edit?usp=sharing
I'm new to AutoLayout and stuck and don't know why this is happening, any help will be greatly appreciated.
Here is my structure of views for this detail view (blogging application, I want to view the entire post which has dynamic height inside of a scrollview):
UIView
-UIScrollView
-SinglePostView (custom view)
-Title
-Subtitle
-Content
Normally to add a 'single post view' to a UIView I simply instantiate it, feed it my Post object and then add a single constraint that pins the width of the singlePostView to the superview, at which point things get laid out nicely. However when I try to add it to a scroll view, it doesn't show up nor does it scroll.
UIScrollView *scrollView = [[UIScrollView alloc] init];
[self.view addSubview:scrollView];
NOBSinglePostView *singlePost = [[NOBSinglePostView alloc] initWithPost:self.post];
[scrollView addSubview:singlePost];
singlePost.translatesAutoresizingMaskIntoConstraints = NO;
scrollView.translatesAutoresizingMaskIntoConstraints = NO;
NSDictionary *viewsDictionary = NSDictionaryOfVariableBindings(scrollView,singlePost);
[self.view addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[scrollView]|" options:0 metrics: 0 views:viewsDictionary]];
[self.view addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|[scrollView]|" options:0 metrics: 0 views:viewsDictionary]];
[scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[singlePost]|" options:0 metrics: 0 views:viewsDictionary]];
In the structure you are presenting, using AutoLayout, the contentSize of your UIScrollView is driven by the intrinsicContentSize of its subviews, here your SinglePostView.
The problem is, SinglePostView being a subclass of UIView, its intrinsicContentSize is always CGSizeZero when considered by itself. What you need to do is make the intrinsicContentSize of your SinglePostView depend on the intrinsicContentSize of its subviews.
Then, because the subviews of your SinglePostView are UILabels, and because a UILabel's intrinsicContentSize is the smallest size it needs to display its content, your SinglePostView's intrinsicContentSize will be equal to the sum of its subviews intrinsicContentSizes, that is the total size needed to display the content of all three of your labels.
Here is how to do it.
Step 1: Removing all automatically set constraints
First, as you partially did, you need to remove all constraints automatically set by the system.
Assuming you don't have any constraints set in your storyboard or XIB (or you don't even have one of these), just do:
scrollView.translatesAutoresizingMaskIntoConstraints = NO;
singlePost.translatesAutoresizingMaskIntoConstraints = NO;
titleLabel.translatesAutoresizingMaskIntoConstraints = NO;
subtitleLabel.translatesAutoresizingMaskIntoConstraints = NO;
contentLabel.translatesAutoresizingMaskIntoConstraints = NO;
Now you have a clear slate and you can start setting your own constraints.
Step 2: Constraining the scrollView
First, let's create, as you did, the views references dictionary for AutoLayout to use:
NSDictionary *views = NSDictionaryOfVariableBindings(scrollView, singlePost, titleLabel, subtitleLabel, contentLabel);
Then, also as you already did, let's constrain the scroll view to be the size of its superview:
[self.view addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[scrollView]-0-|" options:0 metrics:0 views:views]];
[self.view addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|-0-[scrollView]-0-|" options:0 metrics:0 views:views]];
Step 3: Constraining the SinglePostView to push the scrollView's contentSize
For this step to be clear, you have to understand that every constraints set between a UIScrollView and its subviews will actually change the contentSize of the UIScrollView, not its actual bounds. For Example, if you constrain a UIImageView to the borders of its parent UIScrollView and then put an image twice the size of the UIScrollView inside the UIImageView, your image won't get shrunk, its the UIImageView that will take the size of its image and become scrollable inside the UIScrollView.
So here is what you have to set here:
[scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[singlePost]-0-|" options:0 metrics:0 views:views]];
[scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|-0-[singlePost]-0-|" options:0 metrics:0 views:views]];
[scrollView addConstraint:[NSLayoutConstraint constraintWithItem:singlePost
attribute:NSLayoutAttributeWidth
relatedBy:NSLayoutRelationEqual
toItem:scrollView
attribute:NSLayoutAttributeWidth
multiplier:1.0f
constant:0.0f]];
First two constraints are pretty obvious. The third one, however, is here because, for your UILabels to display their content properly and still be readable, you will probably want them to be multilined and the scrolling to be vertical, not horizontal. That's why you set your SinglePostView's width to be the same as your scrollView's. This way, you prevent your scrollView's contentSize.width to be anything more than its bounds.width.
Step 4: Constraining your UILabels to "push" the bounds of your SinglePostView
Fourth and final step, you now need to set constraints on your SinglePostView's subviews, so that it gets an intrinsicContentSize from them.
Here is how you do it (simplest implementation, no margins, one label after the other vertically):
[singlePost addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[titleLabel]-0-|" options:0 metrics:0 views:views]];
[singlePost addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[subtitleLabel]-0-|" options:0 metrics:0 views:views]];
[singlePost addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|-0-[contentLabel]-0-|" options:0 metrics:0 views:views]];
[singlePost addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|-0-[titleLabel]-0-[subtitleLabel]-[contentLabel]-0-|" options:0 metrics:0 views:views]];
And with that you should be done.
One last advice, you should definitely look into UIStoryboard to do these kinds of things. It's a lot simpler and more visual.
Hope this helps,
P.S.: If you want, I can take some time and push a project using both UIStoryboard and the Visual Format Language on Github. Just tell me if you would need one.
Good luck.
in auto layout
frame of scrollview is decided by constraints between scrollview and superview of scrollview.
contentSize of scrollview is decided by constraints between scrollview and subview of scrollview.
you should set the size of singlePostView. ScrollView calculate contentSize from it. (you need to add size constraints explicitly)
CGFloat heightOfSinglePostView = calculate..
[scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[singlePost(heightOfSinglePostView)]|" options:0 metrics: 0 views:viewsDictionary]];
I am new to AutoLayout and struggling with it a bit. I have a UIImageView which is part of an UIView. When the app is running on a 3.5 inch device, I want the UIImageView to resize according to the change of the screen size.
I am not sure how to achieve this. From what I have seen so far, you can only set a fixed width and height of the views, is it possible to make them dynamically resize ? In other words, how can the UIImageView resize accordingly to the super view's height ?
Choose your ImageView in Interface Biulder.
Press pin button.
Set the constraints.
Example
This code will size the UIImageView according to its superview's width and height.
UIImageView *myImageView = [[UIImageView alloc] initWithImage:theImage];
[self.view addSubview:myImageView];
[myImageView setTranslatesAutoresizingMaskIntoConstraints:NO];
NSArray *imageViewConstraints = [NSLayoutConstraint constraintsWithVisualFormat:#"H:|[myImageView]|" options:0 metrics:nil views:#{#"myImageView": myImageView}];
[self.view addConstraints:imageViewConstraints];
imageViewConstraints = [NSLayoutConstraint constraintsWithVisualFormat:#"V:|[myImageView]|" options:0 metrics:nil views:#{#"myImageView": myImageView}];
[self.view addConstraints:imageViewConstraints];
Me too faced same problem.It may help someone,
If you are designing in InterfaceBuilder or Storyboard just pin all the edges to superview (i.e)Leading Space,Trailing Space,Top Space and Bottom Spoace to UIView.
That's it
select the imageView. Now go and add a pin with bottom spacing from super view.
I made a few UIScrollView's in different views, they all worked without Autolayout.
I turned Autolayout on, because it was better for my app.
But since then, there's a big problem with my UIScrollView's:
No one is scrolling, they don't work.
Here's my code for a UIScrollView:
.m:
-(viewDidLoad) {
scrollerHome.contentSize = CGSizeMake(320, 1000);
scrollerHome.scrollEnabled = YES;
[self.view addSubview:scrollerHome];
scrollerHome.showsHorizontalScrollIndicator = false;
scrollerHome.showsVerticalScrollIndicator = false;
[super viewDidLoad];
}
.h:
#interface ViewController : UIViewController{
IBOutlet UIScrollView *scrollerHome;
}
Do I have to add some code because I turned on Autolayout?
You should call [super viewDidLoad] before doing anything !
In autolayout, you do not set the contentSize manually. Autolayout works slightly differently with scrollviews, whereby the contentSize of the scroll view is dictated by the constraints of the scrollview's subviews.
If you're trying to force the contentSize to some large size (for example, you're implementing some infinite scroller), you can just add a subview of the appropriate size, e.g.:
UIView *containerView = [[UIView alloc] init];
containerView.translatesAutoresizingMaskIntoConstraints = NO;
[self.scrollView addSubview:containerView];
NSDictionary *views = NSDictionaryOfVariableBindings(containerView);
[self.scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[containerView]|" options:0 metrics:nil views:views]];
[self.scrollView addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|[containerView(1000)]|" options:0 metrics:nil views:views]];
But if you were trying to set the contentSize in anticipation of adding subviews, you generally don't have to do anything, such as the above snippet. Just add your subviews, provide their constraints, and autolayout will adjust the scroll view's contentSize automatically.
As mentioned above, with autolayout, you can just add the subviews to your scrollview (with their constraints), and the contentSize will be calculated automatically for you.
There is a trick here, though. You sometimes you want to size a subview based upon the dimensions of the screen. But the usual technique of using the | symbols won't work. For example, for an imageview1 inside a scrollview, the usual #"H:|[imageview1]|" won't set the imageview1 to be the width of the screen, but rather it will define the scroll view's contentSize to match the width of imageview1, but it says nothing about what the width of that image view should be!
So, it's useful to capture a reference to the scroll view's superview. That way, you can use something like #"H:|[imageview1(==superview)]|", which not only says "make the scroll view's contentSize equal to the width of imageview1", but also "define the width of imageview1 to be equal to the width of the scroll view's superview."
Thus, for example, to add three images in a paging scroll view, you might do something like:
UIImageView *imageview1 = [[UIImageView alloc] initWithImage:[UIImage imageNamed:#"_DSC0004.jpg"]];
imageview1.contentMode = UIViewContentModeScaleAspectFit;
imageview1.translatesAutoresizingMaskIntoConstraints = NO;
[self.scrollView addSubview:imageview1];
UIImageView *imageview2 = ... // configured similar to imageview1
UIImageView *imageview3 = ... // configured similar to imageview1
UIView *superview = self.scrollView.superview;
NSDictionary *views = NSDictionaryOfVariableBindings(imageview1, imageview2, imageview3, superview);
// not only define the image view's relation with their immediate scroll view,
// but also explicitly set the size in relation to the superview, too!
[superview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"V:|[imageview1(==superview)][imageview2(==superview)][imageview3(==superview)]|" options:0 metrics:nil views:views]];
[superview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[imageview1(==superview)]|" options:0 metrics:nil views:views]];
[superview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[imageview2(==superview)]|" options:0 metrics:nil views:views]];
[superview addConstraints:[NSLayoutConstraint constraintsWithVisualFormat:#"H:|[imageview3(==superview)]|" options:0 metrics:nil views:views]];
self.scrollView.pagingEnabled = YES;
From the Apple iOS 6.0 release notes:
"In general, Auto Layout considers the top, left, bottom, and right edges of a view to be the visible edges. That is, if you pin a view to the left edge of its superview, you’re really pinning it to the minimum x-value of the superview’s bounds. Changing the bounds origin of the superview does not change the position of the view.
The UIScrollView class scrolls its content by changing the origin of its bounds. To make this work with Auto Layout, the top, left, bottom, and right edges within a scroll view now mean the edges of its content view."
You can find the full notes here and find the answer to your question in the section that I quoted from. They give code examples on how to use UIScrollView in a mixed Auto Layout environment.