I have an MVC site that I am publishing through the command line using the arguments
msbuild.exe /p:DeployOnBuild=true /p:PublishProfile=Test MyProject.csproj
The MyProjectproject has a reference to another web application project MyReferencedProject. This is used to store shared Razor views and other shared code with another web site. (Making the project type as a Web Application was recommended by RazorGenerator so that I get intellisense when working with Razor views) This project functions like a class library, and should never be published.
The issue is that when I run the command above, I get the error that it can't find the Test.pubxml for MyReferencedProject:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets(4352,5): error : The value for PublishProfile is set to 'Test', expected to find the file at 'C:\Projects\MyReferencedProject\Properties\PublishProfiles\Test.pubxml' but it could not be found.
How can I run msbuild to publish MyProject without it also trying to publish MyReferencedProject?
I found I can work around the issue by adding a Test publish profile for this project, but that means I have to set up some place to put the code when it's published, which really shouldn't be generated at all.
Try changing your command line to:
msbuild.exe /p:DeployMyProject=true /p:PublishProfile=Test MyProject.csproj
Then add the following property group to MyProject.csproj before any Import statements:
<PropertyGroup>
<DeployOnBuild Condition="'$(DeployMyProject)'!=''">$(DeployMyProject)</DeployOnBuild>
</PropertyGroup>
This solution is based on: How to publish one web project from a solution.
Related
I have a solution that has a Web Site (not a Web Application) and I'm having trouble setting up my Visual Studio Build task.
Usually I setup my MSBuild Arguments like so
/p:DeployOnBuild=true
Then in my Copy Publish Artifact, I e
$(build.sourcesDirectory)/AppSolution/Website/obj/$(BuildConfiguration)/Package/PackageTmp
What MSBuild Arguments do I need to set so that I can make the above work?
The files do not get copied over to the obj/$BuildConfiguration)/Package/PackageTmp folder. So when I go look at the output folder, it just looks like the code files. Not the binaries
Use the MSBuild argument /p:PackageLocation=$(Build.ArtifactStagingDirectory), then publish $(Build.ArtifactStagingDirectory) as an artifact.
I have F# project which I want to build with command line (to use that later in FAKE config).
The problem is that MSBuild fails to resolve assembly dependencies when I use it on the project file directly. While it goes fine when I use solution file with this single project included.
I really have run out of ideas. The solution file seems to not contain any critical information.
Another weird thing is that VSCode also fails to resolve one of those assemblies. I hope that when I fix MSBuild config I may be will able to see what's wrong with VSCode.
Command line:
"C:\Program Files (x86)\MSBuild\14.0\Bin\msbuild.exe" FSharpWeb1\FSharpWeb1.fsproj /t:rebuild
Error message:
C:\work\MNP\testMSBuild1\FSharpWebApi\FSharpWeb1\FSharpWeb1.fsproj(173,5): error MSB4062: The "MSBuild.ExtensionPack.FileSystem.File" task could not be loaded from the assembly C:\work\MNP\testMSBuild1\FSharpWebApi\FSharpWeb1\*Undefined*\packages\MSBuild.Extension.Pack.1.3.0\tools\net40\MSBuild.ExtensionPack.dll. Could not load file or assembly 'file:///C:\work\MNP\testMSBuild1\FSharpWebApi\FSharpWeb1\*Undefined*\packages\MSBuild.Extension.Pack.1.3.0\tools\net40\MSBuild.ExtensionPack.dll' or one of its dependencies. The filename, directory name, or volume label syntax is incorrect. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask.Done Building Project "C:\work\MNP\testMSBuild1\FSharpWebApi\FSharpWeb1\FSharpWeb1.fsproj" (rebuild target(s)) -- FAILED.
I've pushed the minimal demo to github: https://github.com/alehro/testMSBuild.git
It's actually easy to reproduce independently. In VS 2015 Community edition create new project from F# Web Template named "Web Api 2.2" and then try to build it with MSBuild.
Another disturbing thing is that the minimal demo produces different errors from those I've seen yesterday. Also vscode complains on different items. If yesterday it could not resolve a couple of calls, now it complains on all of:
open System.Net.Http
open System.Web
open System.Web.Http
open System.Web.Routing
telling that neither of them is defined.
Reformatting my comments to a response now that it's verified it works:
Your FSharpWeb1.fsproj references MSBuild.ExtensionPack.FileSystem.File task from MSBuild.Extension.Pack, but the path specified in the <UsingTask> tag contains $(SolutionDir) property which is not defined when you run MSBuild outside of Visual Studio.
The error message you're getting shows that in the highlighted part of the path:
The "MSBuild.ExtensionPack.FileSystem.File" task could not be loaded from the assembly C:\work\MNP\testMSBuild1\FSharpWebApi\FSharpWeb1\*Undefined*\packages\MSBuild.Extension.Pack.1.3.0\tools\net40\MSBuild.ExtensionPack.dll.
This can be remedied by conditionally setting the relative path when the property is not set by VS:
<SolutionDir Condition="$(SolutionDir) == '' Or $(SolutionDir) == '*Undefined*'">..\</SolutionDir>
(original response for this solution: https://stackoverflow.com/a/33782131/1659828)
One more thing I mentioned in the comments is that this solution assumes you already have the necessary dependencies downloaded in the packages folder. Visual Studio does that automatically by restoring NuGet packages before build, but when you build in another context, you have to make sure the packages are restored, otherwise the build will keep failing.
I have a Visual Studio 2013 solution with the full Orchard source code. When I use "Publish..." on the "Orchard.Web" project in Visual Studio, it correctly publishes the site to the File System destination I've configured into the .PubXml file that I used.
However, if I build this site using Jenkins, the files do not get copied to the destination. I've created a separate PubXml file that is used by Jenkins.
In my Jenkins job, I have two Build steps of interest. The first uses the src\Orchard.sln file with a command line argument of /p:Configuration=Release. This runs correctly, and builds the entire solution.
The second Build step, immediately after, uses the Build File of src\Orchard.Web\Orchard.Web.csproj and these command line arguments:
/p:DeployOnBuild=true
/p:PublishProfile="D:\workspace\Site\trunk\src\Orchard.Web\Properties\PublishProfiles\Jenkins.pubxml"
/p:VisualStudioVersion=12.0
/p:Configuration=Release
/p:Platform=AnyCPU
/v:minimal
/nologo
/p:WarningLevel=1
With this, the build and deploy seems to work - but doesn't. Here are some lines from the build output:
Copying all files to temporary location below for package/publish:
obj\Release\Package\PackageTmp.
Auto ConnectionString Transformed obj\Release\Package\PackageTmp\Shapes\Scripts\Web.config into obj\Release\CSAutoParameterize\transformed\Shapes\Scripts\Web.config.
(... about 200 more "Auto ConnectionString..." lines...)
Finished: SUCCESS
No where does it actually copy the files to the destination defined in the PUBXML file.
In contrast, in Visual Studio, the output looks similar, but transforms only 4 config files and includes lots of "Publishing folder x" lines:
(...)
Transformed Modules\SH.GoogleAnalytics\web.config using ....
Copying all files to temporary location below for package/publish:
obj\Release\Package\PackageTmp.
Publishing folder /...
Publishing folder bin...
(etc.)
(I have installed the latest Windows Azure SDK for .NET on the Jenkins server.)
I have the same trouble,that work for me:
/t:Rebuild
/p:DeployOnBuild=true
/p:PublishProfile=Jenkins_Publish
/p:Configuration=Release
do not use /p:VisualStudioVersion=xxx
This is kind of old, but I actually just set up Orchard to be able to get built via command line and MSBuild. Here is what I did:
/p:VisualStudioVersion=12.0;PublishProfile="example-profile";DeployProjA=true;FrameworkPathOverride="C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v4.5";Configuration=Release;PublishProfileRootFolder=c:\Workspace\src\Orchard.Web\Properties\PublishProfiles;Password=ExamplePass
Since you are using Orchard you want to make sure that only the Orchard.Web project gets published so do not use DeployOnBuild=true. This will attempt to deploy every web project in the solution, which is a lot for Orchard. Instead follow the guidelines here to see how to deploy only the web project: http://sedodream.com/2013/03/06/HowToPublishOneWebProjectFromASolution.aspx
My team is starting to take on the challenge of automating our Build-Deploy-Test process, beginning with the build.
Right now we have Build Definitions configured in TFS that will publish our site to our servers using Web Deploy, and this is working; however, we aren't able to keep an archive of the packages that would be created with each build because when we turn on package creation with the MSBuild parameter /p:CreatePackageOnPublish=true, the build fails on silly NTFS file length constraints.
Exception Message: TF400889: The following path contains more than the allowed 259 characters: \\builds.tfs.company.com\builds\Project.Dev.Nightly\Project.Dev.Nightly_20130630.6\Debug\_PublishedWebsites\Project.Middleware.Service_Package\Archive\Content\C_C\Builds\1005\Project\Project.Dev.Nightly\Sources\Source\Multi\Middleware\Project.Middleware.Service.
Is there a way that we can break the Archive folder out somewhere else?
You can edit the path by using the _PackageTempDir argument for MSBuild.
Just add _PackageTempDir=D:\{desired dir structure} when you're passing in MSBuild arguments.
More full explanation of this property can be found here -
VS2010 Web Deploy: how to remove absolute paths and automate setAcl?
I have TFS 2010 and for one of the team project I have created the build definition (used default build template) and added the solution of one of the project. But when try to create build getting the following error:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets
(902): The command "if Debug == Debug copy
"C:\Builds\14\\\Sources\ServerObjects..\SharedInterfaces\bin\debug*.dll"
"C:\Builds\14\\\Sources\ServerObjects..\ServerObjects\bin\debug"" exited with
code 1.
I think you maybe has wrong folder structure on the source control, see my answer on similar question here
teambuilding and deploying a dll (e.g. wpftoolkit.extended.dll)
TeamBuild overrides the output folder so the bin\debug (or bin\release) folder won't exist. It collates the output into Binaries.
For your custom build step use the obj folder instead of bin as that'll be the same under both TeamBuild and the local machine build.