I have checked this topic to find two words in a text file: How to combine two search words with "grep" (AND)
But now I'm trying to know if it's possible to check when they are consecutive in the file. For instance:
grep -ilZ "not" file.txt | xargs -0 grep -il "sure"
In file.txt I have "I am not sure".
How could I do?
Thank you so much.
Just grep -il "not sure" file.txt would solve your problem.
Related
I have a bunch of strings that I have to fetch the 'port_num' from -
"76 : client=new; tags=circ, LINK; port_num=switch01; far_port=Gi1/0"
The word might be in a different place in the string and it might be a different length, but it always says 'port_num=' before it and ';' after it...
I only want this bit- 'switch01'
Currently I use-
| grep -Eo 'port_num=.+' | cut -d"=" -f2 | cut -d";" -f1'
But there has got to be a better way
You can try grep -oP '(?<=port_num=).+(?=;)', if you run this:
echo "76 : client=new; tags=circ, LINK; port_num=switch01; far_port=Gi1/0" \
| grep -oP '(?<=port_num=).+(?=;)'
result will be:
switch01
Updated answer: grep -oP '(?<=port_num=)[^;]+(?=;)'
This is what I would use:
... | grep -E 'port_num=.+' | sed 's/^.*port_num=\([^;]*\).*$/\1/'
This works with or without the -o on grep, and the availability of -P will depend on the version of grep you have. (e.g., my grep does not have it). I'm not saying the other answers that rely on -P aren't any good -- they look fine to me. But grep -P will be less portable.
IMHO, piping grep with sed allows each utility to do what it specializes in -- grep is for selecting lines, sed is for modifying lines.
This can be done in a simple sed command:
s="76 : client=new; tags=circ, LINK; port_num=switch01; far_port=Gi1/0"
sed 's/.*port_num=\([^;]*\);.*/\1/' <<< "$s"
switch01
... | grep -Po 'port_num.+(?=;)'
This uses grep's Perl Compatible Regular Expression (PCRE) syntax. The (?=;) is a look-ahead assertion which looks for a match with ";" but doesn't include it in the matched output.
This produces:
port_num=switch01
As #Vladimir Kovpak noted, if you want to exclude the "port_num=" string from this output, add a look-behind assertion:
... | grep -Po '(?<=port_num).+(?=;)'
I would like some advice on how to exclude a word in a line using grep but still keep the line?
So I have tried:
grep -v '1.942134' results.tbl | egrep '*.fits' results.tbl
to try to list all the string with extension .fits but exclude "1.942134" in the sentence but it still returns the full lines.
Any advice?
Or you can use awk
awk '/\.fits/ && !/1\.942134/` results.tbl
PS you should escape the . in both sed and awk or else it will mean just any character.
You should pipe to sed. Sed has lots of abilities, some of them more complicated than others, but one of its best is regexp substitutions.
grep '\.fits$' | sed 's/1.942134//'
I am trying to parse items out of a file I have. I cant figure out how to do this with grep
here is the syntax
<FQDN>Compname.dom.domain.com</FQDN>
<FQDN>Compname1.dom.domain.com</FQDN>
<FQDN>Compname2.dom.domain.com</FQDN>
I want to spit out just the bits between the > and the <
can anyone assist?
Thanks
grep can do some text extraction. however not sure if this is what you want:
grep -Po "(?<=>)[^<]*"
test
kent$ echo "<FQDN>Compname.dom.domain.com</FQDN>
dquote>
dquote> <FQDN>Compname1.dom.domain.com</FQDN>
dquote>
dquote> <FQDN>Compname2.dom.domain.com</FQDN>"|grep -Po "(?<=>)[^<]*"
Compname.dom.domain.com
Compname1.dom.domain.com
Compname2.dom.domain.com
Grep isn't what you are looking for.
Try sed with a regular expression : http://unixhelp.ed.ac.uk/CGI/man-cgi?sed
You can do it like you want with grep :
grep -oP '<FQDN>\K[^<]+' FILE
Output:
Compname.dom.domain.com
Compname1.dom.domain.com
Compname2.dom.domain.com
As others have said, grep is not the ideal tool for this. However:
$ echo '<FQDN>Compname.dom.domain.com</FQDN>' | egrep -io '[a-z]+\.[^<]+'
Compname.dom.domain.com
Remember that grep's purpose is to MATCH things. The -o option shows you what it matched. In order to make regex conditions that are not part of the expression that is returned, you'd need to use lookahead or lookbehind, which most command-line grep does not support because it's part of PCRE rather than ERE.
$ echo '<FQDN>Compname.dom.domain.com</FQDN>' | grep -Po '(?<=>)[^<]+'
Compname.dom.domain.com
The -P option will work in most Linux environments, but not in *BSD or OSX or Solaris, etc.
I have a file that possibly contains bad formatting (in this case, the occurrence of the pattern \\backslash). I would like to use grep to return only the line numbers where this occurs (as in, the match was here, go to line # x and fix it).
However, there doesn't seem to be a way to print the line number (grep -n) and not the match or line itself.
I can use another regex to extract the line numbers, but I want to make sure grep cannot do it by itself. grep -no comes closest, I think, but still displays the match.
try:
grep -n "text to find" file.ext | cut -f1 -d:
If you're open to using AWK:
awk '/textstring/ {print FNR}' textfile
In this case, FNR is the line number. AWK is a great tool when you're looking at grep|cut, or any time you're looking to take grep output and manipulate it.
All of these answers require grep to generate the entire matching lines, then pipe it to another program. If your lines are very long, it might be more efficient to use just sed to output the line numbers:
sed -n '/pattern/=' filename
Bash version
lineno=$(grep -n "pattern" filename)
lineno=${lineno%%:*}
I recommend the answers with sed and awk for just getting the line number, rather than using grep to get the entire matching line and then removing that from the output with cut or another tool. For completeness, you can also use Perl:
perl -nE 'say $. if /pattern/' filename
or Ruby:
ruby -ne 'puts $. if /pattern/' filename
using only grep:
grep -n "text to find" file.ext | grep -Po '^[^:]+'
You're going to want the second field after the colon, not the first.
grep -n "text to find" file.txt | cut -f2 -d:
To count the number of lines matched the pattern:
grep -n "Pattern" in_file.ext | wc -l
To extract matched pattern
sed -n '/pattern/p' file.est
To display line numbers on which pattern was matched
grep -n "pattern" file.ext | cut -f1 -d:
I have a large file where each line contains a substring such as ABC123. If I execute
grep ABC file.txt
or
grep ABC1 file.txt
I get those lines back as expected, but if I execute
grep ABC12 file.txt
grep fails to find the corresponding lines.
This seems pretty trivial functionality, but I'm not a heavy user of grep so perhaps I'm missing some gotcha.
Use something like
od -x -a < filename
to dump out the file contents in hex. That'll immediately show you if what you have in your file is what you expect. Which I suspect it isn't :-)
Note: od has lots of useful options to help you here. Too many to list, in fact.
Is there a chance your file contains some hidden character, such as 0x00 ?
This doesn't make sense. Are you sure the file contains "ABC123"?
You can verify this by running following command in a shell
echo "ABC123" | grep ABC12
If the lines contain ABC123, then "grep ABC12" should get them. Do you perhaps mean that you want to match several different strings, such as ABC1, ABC2 and ABC3? In that case you can try this:
grep -E 'ABC1|ABC2|ABC3'
I'm not sure what the problem is.. grep works exactly as it should.. For example, the contents of my test file:
$ cat file.txt
ABC
ABC1
ABC12
ABC123
..and grep'ing for ABC, ABC1, ABC12, ABC123:
$ grep ABC file.txt
ABC
ABC1
ABC12
ABC123
$ grep ABC1 file.txt
ABC1
ABC12
ABC123
$ grep ABC12 file.txt
ABC12
ABC123
$ grep ABC123 file.txt
ABC123
grep is basically a filter, any line containing the first argument (ABC, or ABC1 etc) will be displayed. If it doesn't contain the entire string, it will not be displayed