Sorry if this is a noob question, I'm starting to learn iOS programming.
As I see im many tutorials and examples, the 1st item in storyboard is almost always a Navigation Controller, like in the image below:
My question is: what is the reason to always put a Navigation Controller as the first view controller? Like in the image above, I think that can remove the Navigation Controller and set the Test Table View Controller as the first view controller, so why need a Navigation Controller there?
Because the navigation controller is what allows tapping a table cell to do a push segue to the next view controller.
Using Navigation Controller could let you make the push segue, It allows you to manage your views in a stack. It's OK to remove the Navigation controller, but you must use another segue to transform controllers.
Related
I have searched around and all cases of using the pop to return to a previous view controller seem to be based around using a navigation controller, I am using a tab bar controller and have no real need to the navigation controller and so havent implemented it.
I load this detailed view controller via a segue based on rowindex selected in a list controller and just need to close it when they are done reading with a close button.
Is there still a method that can be used to pop a view controller without it all being housed in a navigation controllers unnecessarily?
Why don't you use a Storyboard and use an Unwind Segue to go back to the prev. View? Take a look at this Unwind Segue, hope will help you.
I want to design a routing mechanism for management view controller transitions in objective-c.
Two view controllers, without reference to the other side of the pointer, the transition is completely controlled by the route.
How to achieve the route?
Thanks for your help.
I hope you think like this.
Route = Segue (In Xcode)
Take Two View controller
Make 1st Embed in Navigation controller (Which is must be initial View Controller)
Put One Button in 1st VC
Press Ctrl + Drag Mouse from button to 2nd VC (One popup will be show, then select Push)
Run Project
Press Button
Lol
You can use Storyboard's segues. Create view controllers and segues between them. You can use Push Segue or Model Segue. Push Segue will let you pop next view controller too, and you will have to embed your first view controller into navigation controller. For Model Segue, you can move from one view controller to another but to return to previous view controller, you will have to create another segue.
I think I find the approach to answer this question。 Here is the similar project.
I have have a view controller that is embedded in a UINavigationController and I want to segue to another view controller that is also embedded in a different UINavigationController. If I try to use a push segue, I get an error saying that I can't push a UINavigationController. However, I don't think using a modal segue is appropriate. How should I go about this?
How should I go about this?
You should use a single navigation controller.
the problem is that I want different bar button items for each view controller and they won't change
Each view controller can set up the bar buttons however it likes. Take a look at UINavigationItem. Each view controller has a navigation item, and the navigation item has various properties such as leftBarButtonItems and rightBarButtonItems that you can use to set the buttons.
Difference between navigation controller and viewcontroller?
I mean how can we decide when to use navigation controller or a normal view controller?
Just my two cents:
A UIViewController represents a single view and you can put buttons in this view controller to segue to another UIViewController. If you want to segue back to the first UIViewController, you will have to worry about putting a button in the second view controller that leads back to the first. If you are drilling down into view controllers, this can be tedious having to remember to give the user a way back to a previous view controller.
A UINavigationController does a lot of this tedious work for you. As mentioned, it contains a stack of UIViewControllers. It will create a navigation bar at the top that will allow you to easily go back up the hierarchy of view controllers.
In short, if you have a hierarchy of view controllers that you want the user to easily navigate around, inbed your UIViewControllers into a UINavigation controller.
UINavigation Controller is a combination of 2 or more view controllers,those are connected through "segue" feature of "Ios". Benefit of using Navigation Controller is that we can navigate between different screens easily with default "Back" button on each screen . We don't need to give any individual button to move back onto previous screen.
Whereas a ViewController provides a single screen & we can connect more screen using "segue" but we also have to design a "Back" button to navigate onto previous screen.
We should use Navigation Controller , in case where one option resides into another one.Like in an iPhone settings ->Mobile Data Options->Voice->4G or 3G or 2G. It's a hierarchy of menus so here navigation Controller is better option than using UIController.
We should use UiController with "segue " , in case where
we have to choose one option among multiple.Like -
Photos ->There are many folders in which , any one is selected, that are Favourites or People or Places .
Here's a very brief, high-level overview.
Whereas a UIViewController can be thought of as representing a single 'screen', UINavigationController, as the name implies, is used as a means of being able to navigate multiple 'screens'.
From the documentation:
The UINavigationController class implements a specialized view controller that manages the navigation of hierarchical content. This navigation interface makes it possible to present your data efficiently and makes it easier for the user to navigate that content. You generally use this class as-is but in iOS 6 and later you may subclass to customize the class behavior.
Please see the rest of the UINavigationController documentation here: https://developer.apple.com/library/ios/documentation/UIKit/Reference/UINavigationController_Class/index.html
Okay, Thank you everyone for helping me to find out a clear answer on this.
Navigation Controller consists of navigation bar and tool bar to move in and out from view controllers present in navigation stack.Therefore there can be many view controllers in Navigation Controller.
In view controller we don't have this facility and it represents a single screen view.
Please correct me If I am wrong.
See the Navigation Controller discussion in the View Controller Catalog.
Bottom line, a navigation controller actually is a view controller, but it just happens to be one that presents and navigates between other view controllers.
I'm new in Objective-C, and even more using storyboards. This being said I'm trying to use a bar button item within UITabBarController and UINavigationController as can you see in the image below.
But once I run the project in simulator this item is not showing. I would appreciate a non programmatically solution if it's posible.
Okay, so the way to do this:
When you create your tab view controller. You have to add a navigation controller that will handle each tab.
Tab View Controller --> navigation controller --> View Controller 1.
Then add the bar button item to view controller 1. Then go ahead and add the segues.
Now, still it won't show up.
But, if you go to your code for your view controller 1: Add a reference from the storyboard of your bar button item into your View Controller 1 file. Then, in ViewWillAppear():
self.tabBarController.navigationItem.rightBarButtonItem = _btnNewContact;
From there, it will show up and the segue you have configured in your storyboard should work perfectly! =)
After I spent a while trying to get the best way to do it I finally did that I should have done since begin. Read official apple documentation.
Parameters
viewController
The view controller that is pushed onto the stack. This object cannot be an instance of tab bar controller and it must not already be on the stack.
In other words, my approach is just a bad design.