How can i programatically add a UICollectionView in the UITableView's viewForHeaderInSection ?
-(UIView *) tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
UICollectionView *cell;
return cell;
}
Note: I have already added the UICollectionViewDataSource and UICollectionViewDelegate in the .h file. But, i am not sure how to programatically create the UICollectionView . Can someone please help.
Maybe you want [[UICollectionView alloc] initWithFrame:(CGRect)];?
I don't know your class design, but maybe you can init the collection view(s) and set their delegate and datasource in viewdidload, store them in an array, and choose the collection view at the right index in viewForHeaderInSection.
Related
I haven't developed any iOS apps in a while. I am fine with both swift and Objective-C but what I find different is adding a UITableView to ViewController. Before, I used to add a UITableView to ViewController, add the required datasource methods and the typical UITableViewCell object, and return the cell in cellForRowAtIndexPath:, which would display empty cells depending on the number of rows I return. Now, I did everything the same, but the UITableView is empty and when I scroll I see the lines but not my cell.textlabel.text value, which I set. It seems now I am supposed to add UITableViewCell to the UITableView and remove the
#pragma-mark TableView Datasource
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
return [_formTitles count];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell =[tableView dequeueReusableCellWithIdentifier:#"cell"];
if(cell==NULL)
{
cell=[[UITableViewCell alloc]initWithStyle:UITableViewCellStyleValue1 reuseIdentifier:#"cell"];
}
cell.textLabel.text=[_formTitles objectAtIndex:indexPath.row];
cell.detailTextLabel.text=#"Kaushik";
return cell;
}
I can't find a simple post online regarding the same.
Can someone post what are the changes in the new iOS 9 in a simple manner?
Thank you
Right..For those of you who are still prefer to add a tableview to a viewcontroller.Here are the steps
In the ViewController drag and drop the tableview.Now instead of the lines which you see in the old Xcode.This time you would see a blank table view with the text " Table View prototype content" in the middle.
We usually create a tableviewcell only we doing anything different like adding more labels or image etc but hereafter it is required to add a tableviewcell in the tableview.Drag and drop a tableview onto the tableview.It will display as protype cells.One can select type of cell here itself as basic,value 1,value 2 or subtitle.Also NEED TO SET THE REUSE IDENTIFIER IN THE STORYBOARD UTILITIES PANEL ON YOUR RIGHT. At the end, you can select the tableview and add the missing constraints.
Implement the typical required datasource methods in your viewcontroller class.
(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
return 5;
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell =[tableView dequeueReusableCellWithIdentifier:#"cell"];
cell.textLabel.text=#"text";
cell.detailTextLabel.text=#"DetailedText";
return cell;
}
The change here is that we dont require the usual if(cell==nil)
{..}
piece of code since we added the prototype cells to the storyboard.
Don;t forget to connect the delegate and datasource of the tableview to the viewcontroller.
This should display the tableview in your viewcontroller but i am getting a space on top of the tableview which i don't know why.Anyway this is how you add a tableview to a view controller using Objective-C language in iOS 9.3.
FYI: Guys if i've missed anything, please mention it in the comments
Thank you
Put tableView to view controller and link it to viewcontroller.
link delegate and datasource of tableview to viewcontroller.
in
viewcontroller.h
#interface ViewController :<UITableViewDelegate, UITableViewDataSource>
in viewWillAppear put
tblService.delegate=self;
tblService.dataSource=self;
and your array elements.
5.Impliment your tableview delegate method and datasource method .
6.be sure you cell identifier equal the one put on storyboard.
this link will help you more to implement your first app and this video.
I want to have the height of my UITableView cells depend on the material they contain. My view controller object is a subclass of UITableViewController and conforms to the <UITableViewDelegate> protocol. Is this the correct place to reference the protocol?
Then in my implementation I declare
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
{
return [indexPath row] * 20;
}
but when I run the app each row is of fixed height that is visually represented in the storyboard. Is it something with the prototype cell that is overriding my code? Am I missing something completely naive?
Did you set your view controller as delegate to table view. You can do it either through connection inspector of your table view in xib/ storyboard. Or you can do it by doing following in your initWithNibName:bundle: method
myTableView.delegate = self;
I try to display objects of an array in a tableview.
This is a single screen app, I'm using storyboard.
When running - the tableview appears as an empty grid. the data of the objects is not displayed. what may cause this?
Having 2 required methods numberOfRowsInSection and cellForRowAtIndexPath I suspect the last one.
The .h file contains this row:
#interface MYViewController : UIViewController <UITableViewDataSource, UITableViewDelegate>
I set the delegate & datasource via the code as you suggested. still empty grid.
This is my implementation:
-(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [listRecipes.recipeArray count]; }
-(UITableViewCell )tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString cellIdentifier = #"ListCellIdentifier"; MYCustomListCell* listCell = [tableView dequeueReusableCellWithIdentifier:cellIdentifier]; NSString* dataString = listRecipes.recipeArray[indexPath.row]; listCell.listName.text = dataString; listCell.imageView.image = [UIImage imageNamed:dataString]; return listCell; }
I try to display data from an array in MVC .
If the array is local - the data is displayed
Can you please advise what to do?
Thank you in advanced.
Always remember to hook up your table's delegate and datasources.
Being a UIElement on a UIViewController that conforms to these two protocols is not enough for Xcode to assume that that UIViewController should be the delegate and/or datasource for the table.
Right click on your tableview, drag from delegate & datasource to your UIViewController.
You can also set these programmatically via:
self.table.datasource = self;
self.table.delegate = self;
And if you're still having trouble after this, you'll have to show us how you're implementing the datasource protocol methods.
Check if your initialisation of tableview delegate and datasource would be before the recipeArray is initialised. In this case you will have to tableView.reload() after the items are added to recipeArray .
Here is what I have done:
I created a custom xib file that has a small UIView used for a custom table section header.
I classed the custom xib file.
I want to add this to a tableView as the header. I have looked at a few resources, but they seem to be either outdated or missing information.
Looking in the documentation, I see a reference to adding a custom header with the following instructions:
To make the table view aware of your header or footer view, you need to register it. You do this using the registerNib:forCellReuseIdentifier: or registerClass:forCellReuseIdentifier: method of UITableView.
When I added a tableView to my storyboard view, it was easy to assign it a reuse identifier within XCode. I was even able to create a custom cell xib file and it also had a spot for a reuse identifier within XCode.
When I created the custom UIView for the section header, it did not have an entry for reuse identifier. Without this, I have no idea how to use registerNib:forCellReuseIdentifier.
More information:
I have a storyboard scene that has a tableView inside. The tableView is of a custom class that is linked and the tableView object has an outlet in the parent view's ViewController file.
The parent ViewController is both the UITableViewDataSourceDelegate and UITableViewDelegate. Again, I was able to implement the custom cells with no issue. I can't even modify the header in any way besides the title.
I tried calling the method [[self tableHeaderView] setBackgroundColor:[UIColor clearColor]]; from the custom tableView class and nothing happens. I tried using this method in the parent ViewController class by using the outlet name like so:
[[self.tableOutlet tableHeaderView] setBackgroundColor:[UIColor clearColor]];
Any help would be greatly appreciated.
EDIT: (Can't change background to transparent)
- (UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
HeaderView *headerView = [self.TableView dequeueReusableHeaderFooterViewWithIdentifier:#"tableHeader"];
// Set Background color
[[headerView contentView] setBackgroundColor:[UIColor clearColor]];
// Set Text
headerView.headerLabel.text = [self.sectionArray objectAtIndex:section];
return headerView;
}
You don't need to set the identifier in the xib -- you just need to use the same identifier when you register, and when you dequeue the header view. In the viewDidLoad method, I registered the view like this:
[self.tableView registerNib:[UINib nibWithNibName:#"Header1" bundle:nil] forHeaderFooterViewReuseIdentifier:#"header1"];
Then, in the delegate methods:
-(UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
UIView *headerView = [self.tableView dequeueReusableHeaderFooterViewWithIdentifier:#"header1"];
return headerView;
}
-(CGFloat)tableView:(UITableView *)tableView heightForHeaderInSection:(NSInteger)section {
return 100;
}
On the problem with background color (Unless you want transparent):
You can create an UIView which occupies the whole view then change the background color of that.
If you don't want others to know what's happening, you can overwrite the backgroundColor property:
//interface
#property (copy, nonatomic) UIColor *backgroundColor;
//implementation
#dynamic backgroundColor;
- (void)setBackgroundColor:(UIColor *)backgroundColor {
//self.viewBackground is the created view
[self.viewBackground setBackgroundColor:backgroundColor];
}
- (UIColor *)backgroundColor {
return self.viewBackground.backgroundColor;
}
I am creating an App with following design:
I have a UITableView with custom UITableViewCell.
Each UITableViewCell contains a scroll view with multiple UIViews of size 150x150
Each of the small UIView contains a UITableView.
Since i am new to this, the forum is not allowing me to upload a picture, which could have explained the design very easily.
I have created the full design in the storyboard. The issue i am having is that the inner UITableView is not getting populated. The cellForRowAtIndexPath, numberOfSections or the numberOfRowsInSection methods of the datasource table view controller class do not get called.
I am using XCode 4.3.2 iOS5.
Following are the class structure:
NewsTableViewController : The ViewController for the mail table.
NewsTableViewCell : Custom TableViewCell which contains object of custom UIScrollView.
NewsScrollView: Custom UIScrollView containing UIViews and UITableView objects which are linked to the Storyboard UITableViews inside the UIViews.
NewsInnerTableViewController : TableViewController to be used as Datasource and Delegate for InnerTableViews.
I have created the object of NewsInnerTableViewController in NewsTableViewController and assigned it as delegate and datasource of the inner tableview.
-(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSSTring *CellIdentifier = #"NewCell"
NewsTableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];
newsInnerTableController = [[NewsInnerTableViewController alloc] initWithStyle:UITableViewStylePlain];
cell.scrollView.innerTable.delegate = newsInnerTableController;
cell.scrollView.innerTable.datasource = newsInnerTableController;
return cell;
}
I am unable to understand where i am going wrong. or is something like this needs to be created is some other way. or the Datasource and delegate needs to be assigned at some other level.
Please share your thoughts on this.
the trick is to have the UITableTableViewCell as the Datasource and delegate for the inner UITableView
http://iosstuff.wordpress.com/2011/06/29/adding-a-uitableview-inside-a-uitableviewcell/