I'm having an issue with storyboard (least bit surprised).
I have one ViewController which holds a container view along side various image views. Naturally, the image views selected determine what is displayed in the container view.
My issue is that when simulated on iPhone 6 plus, i have the container not meeting the edge of the window, thus creating a gap (See below - Left hand side).
My constraints are as seen below
As they appear in storyboard
I'm lost as to how i am supposed to do this easily & correctly. Any suggestions?
Delete those two constraints and then add them again, this time unchecking "Constrain to margins".
Related
I'm new to programming and I'm trying to work with Xcode. I have no experience. I'm trying to make an app with Xcode. I'm done with the code, the only issue i have is with the storyboard constraints. I need some one who can help me to set them up.
So, i have 28 buttons as you can see in the picture, I want to keep the size of 65x65 pixels. that means that the distance between them should vary in different device sizes(4inch, 4.7inch and 5.5inch). i also should mention that i want it to be only in portrait view and only for iPhone.i hope someone can help because I'm to noob for this, I've searched a lot on the internet but I'm not able to do it.
UIStackView (iOS 9+)
UIStackView was introduced in iOS 9, which is very useful in your case.
Edit: Before getting started, make sure to have size classes to be w Any, h Any, this will make thing easier.
To use this, search UIStackView in your utility panel.
Drag an drop a Vertical Stack View on the view of your view controller and set the constraints so it spans the whole screen.
Select the stack view we just placed and set the distribution to Fill Equally.
Drag and drop a Horizontal Stack View onto the vertical one.
Select the horizontal one and set the distribution to Fill Equally.
Place your buttons in the Horizontal Stack View.
Copy and paste the horizontal stack view multiple times based on number of rows you want.
That's it.
You can control the buttons' background images to make it smaller (65px), or you can place a view as its' parent then align horizontally/vertically to place it to the center, like this:
Orientation
If you'd like to lock the orientation throughout the app, go to the settings of your project.
Sample project
I made a sample project for this question, you can check it out here: https://github.com/cyhsutw/UIStackView-example
I used to be able to do this:
UIButton *bigBottomBtn=[[UIButton alloc]initWithFrame:CGRectMake(0, self.view.frame.size.height-60, self.view.frame.size.width, 60)];
I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent.
What is going on with Xcode, Autolayout and Apple for that matter....is my Xcode not working properly? Have I missed a major memo? is Apple just going downhill fast?
Your button-creating code used to work (and still does) if self.view's frame was correct at the time you created the button. Note that the view doesn't necessarily come out of the xib or storyboard with the correct frame; the xib/storyboard contains the view at some design size which might not match the current device. This wasn't as much of a problem when all iPhones had 3.5 inch screens, but became a pretty common problem with the advent of the iPhone 5's 4 inch screen.
The view isn't guaranteed to have its correct frame until its superview's layoutSubviews returns, so if for example you're creating bigBottomBtn in viewDidLoad, that's too early. Many questions on stackoverflow cover this problem. You either need to set the autoresizingMask of the button, or implement layoutSubviews or viewDidLayoutSubviews to update the button's frame, or turn off translatesAutoresizingMaskIntoConstraints and install constraints. Note too that your view can change size if you support rotation, slide over or split view multitasking, or if your view can be the detail view of a UISplitViewController, so it's a bad idea to try to guess the correct frame of the button based on the device's screen size at the moment the button is created.
Note that storyboards now by default use a design size of 600x600, which isn't the size of any device. This is probably because if Apple chose some device's size (say, the iPhone 5's 320x568) as the default, and you happened to use a device of that size as your primary (or only) test device, you could easily forget to think about what your app will look like at other sizes. However, you can explicitly set the design size to some device's size if you want:
I usually use “iPhone 3.5-inch” if I don't specifically need something bigger, because it lets me get the most scenes on the screen simultaneously (and produces the smallest screen shots for stackoverflow).
As for “I also used to be able to just drag a button onto a storyboard and add a constraint that would hold it to the bottom of the parent”, I have good news: you still can. Example:
However, you do need to be careful if you have filled your root view with a table view as appears to be the case in your screen shots. You need to drag the button to the document outline in that case, because if you drop it on the table view, Xcode will assume you want it to be the table view header:
Trying to pin a table view header to the bottom of the screen would be folly.
As for the Editor > Align menu, I have found that the items can be mysteriously inactive, which is frustrating.
Note, though, that only the “Horizontally in Container” and “Vertically in Container” will work (when they work at all) with a single view selected. To use the other items in the menu, you need to have at least two views selected, because the other items align the selected views with each other by setting their frames:
If you only have one view selected, Xcode doesn't know what other view you might want to align it to.
Those menu items are perhaps useful in the springs'n'struts model, but they don't add constraints, and under autolayout you probably want constraints to enforce the alignment at run time.
As far as I know, those menu items have never added constraints, but I'm not going to reinstall Xcode 6 to verify that, because there's a convenient popover that will add constraints corresponding to all of those menu items:
In xcode you always need to add buttons according to its visibility. As you said you need to show button on top of tableView and it should be aligned to bottom. For that You just need to arrange the order of items. as shown in the image below.Provide the layout for the button.
I have a container view showing a sidebar which is pinned to the main views leading edge. The sidebar is initial visible which is fine for iPads however I would like it to be hide initially for smaller devices. To do that I need to set the side bars trailing edge constraint to be (0 - its own width)
As far as I can see this is not possible in the interface builder. I have tried to do it in the viewDidLoad, checking if the device is an iPhone before doing self.sidebarX.constant = -self.sidebar.frame.width. This fails because viewDidLoad has not set up the views yet so the width is wrong. I also tried to do it in viewDidLayoutSubviews however the user sees the sidebar disappearing which isn't nice. I am sure there must be a common way of dealing with this?
I finally worked it out. viewDidLayoutSubviews was the correct place to be doing this. At first when I tried it, it was showing the sidebar slide away as the view controller loaded. It turns out this is because I was calling my closeSidebar method which animates the side bar moving off screen. Changing this so it just sets the view off screen and adding a check to ensure this only done once on first load (as viewDidLayoutSubviews is called multiple times) does the job of hiding the the sidebar for certain devices without anyone seeing it happen.
You can set this using xcode adaptative layout:
You can set the different position for all different screen types here, changing the constraints, positions, sizes to each different type you need.
You can install the layout of one object in different screen types using the dialog below:
Have a look in this 2 parts tutorial from raywenderlich part 1 part 2
I am trying to develop a simple app with one screen for iOS and am running into a strange problem. Only half of the app is showing up. For example I have a screen with just one button in the center of the screen. When I run the app in the simulator I only see half the button and I cannot move it either.I can scroll the view in the simulator vertically but not horizontally. I am stumped. Will appreciate any pointers.
I'm pretty sure you built your view using the main storyboard and put everything in the middle of it. The main storyboard is set to take all iOS format into account, iPhone and iPad. If you want your app to appear centered on your iOS device, you need to constraint the position of your different UI objects, using Auto Layout. That way it would appear centered automatically, whatever is the device you're using
I reckon you've got AutoLayout turned on... but haven't set any constraints on your controls yet.
Try the following test:
Go into your Storyboard file.
Click on a blank area in your storyboard, then on your screen (so the border of your screen is blue - not black or gray).
In the menu bar, click on Editor \ Resolve Auto Layout Issues, and then "Update Frames".
Alternatively, you can click on the following button, and select "Update Frames" from there (it doesn't matter which one):
When you do this, where does your "one button" end up ? Does it suddenly disappear off the screen, have a negative X or Y position, or a width/height of 0 ? If so, then AutoLayout is your problem.
With XCode 6.1, Apple has put a gun to developers' heads and demanded that when you add an object to a Storyboard, you must - straightaway - add some constraints to it.
I had this issue when I first upgraded to XCode 6.
I would add, say, a View to a screen, stretch it to a particular size, then drag a second control (perhaps a Label) onto the same screen. Suddenly, my View would resize itself to a height/width of zero, or be positioned way off the side of the screen... huh ?!
To get around this, when you add a control onto a Storyboard, you must add sufficient constraints to really let XCode calculate where to position it, based on which device/orientation the device is running on. And, yes, you sometimes need to do this straightaway before XCode ridiculously decides to mess up your control's position or size.
I really do loathe XCode. This isn't the way a development environment should behave in 2015...
If I get your point of problem then
I m sure the problem is you have auto layout and size classes enabled.
check if you have Auto layout and size classes enabled ....???
If yes then you haven't set the constraints accurately. set the constraints for the UI Objects to show on your desired position in screen.
I am having a strange situation. I created a very simple screen with some buttons on the storyboard, then when I ran the emulator (is it correct to say simulator or emulator?) it got the spacing wrong for one of the buttons.
I am adding a screenshot. The emulator is to the right of the storyboard screen.
Any idea why this may happen?
I thought it was a problem with the button. And it might have been. But when I took out two lower buttons, I got something even weirder as shown on this screenshot:
Thanks!
It looks like you are using Autolayout, and all your buttons except Investment has a Top constraint while Investment has a Bottom constraint, causing Investment's distance to bottom to stay the same when the screen grows taller.
Click on Investment button, click [Editor -> Pin -> Top space to Superview] in the top menu.
Click Investment button again. Click the second tab from the right in the right panel (the one where you can set frame). Look for a Top Space to Superview constraint, right click and delete. If there isn't one, then XCode did its job. Try running simulator again.
Edit: I just want to say that XCode has a habit of adding Top constraints for you when the view you just dragged into the xib is in the upper half of its container, and Bottom constraints when it's in the bottom half. I know XCode is trying to help but it drives me crazy sometimes.
It looks like you're using a 3.5" simulator and laying out for a 4" device, so the view will be resized.
If you're using autoresize masks, are some of the autoresize masks on your buttons incorrect? You probably want them all to stick to the top of the screen. Check to make sure the autosizing for each of your buttons matches this image. (You'll need to click the "ruler" icon to see these settings.)
I assume that you're using the XCode4 which provides NSAutoLayout as default. When you place an object to the storyboard NSAutolayout automatically creates constrains which layouts the object on the screen automatically for different devices(iPhone4,iPhone5) or orientations(portrait/landscape). Please check NSAutolayout class and constrains. if you want you can remove the NSAutolayout and your objects will be displayed on the simulator normal but in that case you have to manually adjust your objects for different orientations and screens
Hope helps.