I am saving audio data to the Documents directory and trying to read it back. If I play it back immediately it plays successfully, however, if I start a new session and try and play the song locally it will fail even though listing the files in the Documents directory shows that my file is still there. Note that the file is played back from the Documents folder in the same way (same code) if it is played immediately or during a new session.
Here is how I save the audio data to the Documents directory:
+(void)writeDataToAudioFile:(NSData*)data forTrack:(MediaItem*)track
{
// filename looks like "[track_id].mp3"
NSString *fileName = [NSString stringWithFormat:#"%#.%#",track.sc_id,track.original_format];
NSString *pathName = [[NSSearchPathForDirectoriesInDomains(NSDocumentDirectory,
NSUserDomainMask,
YES) firstObject]
stringByAppendingPathComponent:fileName];
[[NSFileManager defaultManager] createFileAtPath:pathName
contents:data
attributes:nil];
}
Then in my music player I want to load the local URL to this file to initialize the AVPlayer:
NSURL *url;
if(_currentTrack.is_local_item)
{
url = [NSURL fileURLWithPath:_currentTrack.local_file_path];
}
url does not get created properly as AVPlayer does not play. Furthermore, I have tried every different way to load the file as data into an NSData object to check the byte size but trying to access the file as data always returns nil. However, the file exists as if I use NSFileManager I am able to iterate over the items in the Documents directory and print their file names/paths, validating that I the path I have saved in "_currentTrack.local_file_path" does exist. Again, if I play the file immediately after saving the file to disk it will play back.
If there is more info I can provide to make this clearer I will. Thank you very much.
Do not write the full directory path to DB. It will change. You need to only save the file name to DB as reference. Then use as follows:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsPath = [paths objectAtIndex:0];
NSString *fileName = #"SAVED_FILE_NAME.mp3"; // eg: [track_id].mp3
NSString *filePath = [documentsPath stringByAppendingPathComponent:fileName];
This will provide you the actual path of the file.
Keep coding........... :)
I found the solution after putting the problem down for a few days. I break-pointed and print-stated the heck out of the program and I found that the file path I was saving was not the same as the file path of the file.
I think this was a simulator issue, as the issue only occurred between different sessions of the simulator, and worked within the same session, so the device id (which is part of the absolute path) was changing - maybe someone more knowledgeable can weigh in on that.
Pay closer attention to the string values of your variables folks!
Related
I am trying to take content from one file and write it into another. I am reading fine, but I am not able to write it into another file.
I have a database of words. I want to separate the words into different files based on the number of letters. All four letter words go into one file, and so on. I added a txt file called "4letter" into my resources and the following is my code:
NSError *error;
//READ
NSString *dbFile = [[NSBundle mainBundle] pathForResource:#"words" ofType:#"txt"];
NSString *test = [NSString stringWithContentsOfFile:dbFile encoding:NSUTF8StringEncoding error:&error];
//convert from string to array
NSArray *lines = [test componentsSeparatedByString:#"\n"];
NSFileHandle *logFile = nil;
logFile = [NSFileHandle fileHandleForWritingAtPath:[[NSBundle mainBundle] pathForResource:#"4letter" ofType:#"txt"]];
//Test if write works
for (int i=0; i<5; i++)
{
NSString *randomAnagram = [[lines objectAtIndex:i] lowercaseString];
[logFile writeData: [randomAnagram dataUsingEncoding: NSNEXTSTEPStringEncoding]];
}
In iOS, you can't write into a file in your app's bundle -- the entire bundle is read-only. Use a path into the Documents folder instead.
See special File System Programming Guide for better understnading.
In iOS, you can't write into a file in your app's bundle -- the entire bundle is read-only.
Consider reading iOS Data Storage Guidelines to better understand the purpose of directories below, in context of iCloud backup.
<Application_Home>/AppName.app
This is the bundle directory containing the app itself. Do not write
anything to this directory. To prevent tampering, the bundle directory
is signed at installation time. Writing to this directory changes the
signature and prevents your app from launching again.
<Application_Home>/Documents/
Use this directory to store critical user documents and app data
files. Critical data is any data that cannot be recreated by your app,
such as user-generated content. The contents of this directory can be
made available to the user through file sharing. The contents of this
directory are backed up by iTunes.
<Application_Home>/Library/
This directory is the top-level directory for files that are not user
data files. You typically put files in one of several standard
subdirectories but you can also create custom subdirectories for files
you want backed up but not exposed to the user. You should not use
this directory for user data files. The contents of this directory
(with the exception of the Caches subdirectory) are backed up by
iTunes. For additional information about the Library directory, see
“The Library Directory Stores App-Specific Files.”
See full list (tmp/, Documents/Inbox) in iOS Standard Directories: Where Files Reside
UPDATE
I use NSFileManager method URLForDirectory:inDomain:appropriateForURL:create:error:
Like Caleb said, you can't write to your app's directory, but you can write to your app's Documents folder. You can get it like this:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
Your app's bundle is read-only. There is two ways I could see:
1) Write in documents folder:
NSArray *pathList = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *path = [myPathList objectAtIndex:0];
2) Use sqlite database. This is the same as 1 (you must save db in documents anyway), but you're using sqlite database. I think this is better than a lot of txt and plist files: here's a tutorial on the topic.
I use the following code :
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *appFile = [documentsDirectory stringByAppendingPathComponent:#"set.txt"];
NSString *data=#"Kostas";
[data writeToFile:appFile atomically:YES];
NSString *myData = [NSString stringWithContentsOfFile:appFile];
NSLog(#"Data : %# ",myData);
I save some run-time generated files inside the .app bundle of my iOS app. In the simulator it works fine, in the device it crashes:
Could create output files in the given shader cache path
'/var/mobile/Applications/CB064997-B40E-4FE3-9834-B3217CE33489/SimedTest.app/Ogre3D/assets/RTShaderLib/cache/
Is there a good overview of where I should and shouldn't put files - how to use Documents, Library and tmp, etc?
To clarify, these are files created at startup which pre-calculate some data to save time. IF they are not present they get created so it's fine they are deleted, but not while the app is running.
The bundle is read-only. You don't want to mess around with it for two reasons:
Code Signing: the signature is verified by against the contents of the bundle; if you mess around with the bundle, you break the signature.
App Updates: updates work by replacing the entire app bundle with a newly downloaded one; any changes you make will get lost.
Where you should save stuff:
Documents: if you want it to persist and be backed up
Library/Caches: if you just want to cache downloaded data, like profile pics; will be auto deleted by the system if it is low on room unless you specify with a special do-not-delete flag.
tmp: temporary files, deleted when your app is not running
For a full explanation check out File System Programming Guide and QA1719.
No, every time you change your bundle you invalidate your signature.
If you want to write files you`l need to write in the best folder depending on what you want to do with that file.
Documents folder for long duration files
Cache for small operations
and so on
EDIT
To get the path you`ll need something like this:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:#"filename.ext"];
With this path you can write or read like this:
write:
NSString *content = #"One\nTwo\nThree\nFour\nFive";
[content writeToFile:fileName atomically:NO encoding:NSStringEncodingConversionAllowLossy error:nil];
read:
NSString *content = [[NSString alloc] initWithContentsOfFile:fileName usedEncoding:nil error:nil];
I am trying to take content from one file and write it into another. I am reading fine, but I am not able to write it into another file.
I have a database of words. I want to separate the words into different files based on the number of letters. All four letter words go into one file, and so on. I added a txt file called "4letter" into my resources and the following is my code:
NSError *error;
//READ
NSString *dbFile = [[NSBundle mainBundle] pathForResource:#"words" ofType:#"txt"];
NSString *test = [NSString stringWithContentsOfFile:dbFile encoding:NSUTF8StringEncoding error:&error];
//convert from string to array
NSArray *lines = [test componentsSeparatedByString:#"\n"];
NSFileHandle *logFile = nil;
logFile = [NSFileHandle fileHandleForWritingAtPath:[[NSBundle mainBundle] pathForResource:#"4letter" ofType:#"txt"]];
//Test if write works
for (int i=0; i<5; i++)
{
NSString *randomAnagram = [[lines objectAtIndex:i] lowercaseString];
[logFile writeData: [randomAnagram dataUsingEncoding: NSNEXTSTEPStringEncoding]];
}
In iOS, you can't write into a file in your app's bundle -- the entire bundle is read-only. Use a path into the Documents folder instead.
See special File System Programming Guide for better understnading.
In iOS, you can't write into a file in your app's bundle -- the entire bundle is read-only.
Consider reading iOS Data Storage Guidelines to better understand the purpose of directories below, in context of iCloud backup.
<Application_Home>/AppName.app
This is the bundle directory containing the app itself. Do not write
anything to this directory. To prevent tampering, the bundle directory
is signed at installation time. Writing to this directory changes the
signature and prevents your app from launching again.
<Application_Home>/Documents/
Use this directory to store critical user documents and app data
files. Critical data is any data that cannot be recreated by your app,
such as user-generated content. The contents of this directory can be
made available to the user through file sharing. The contents of this
directory are backed up by iTunes.
<Application_Home>/Library/
This directory is the top-level directory for files that are not user
data files. You typically put files in one of several standard
subdirectories but you can also create custom subdirectories for files
you want backed up but not exposed to the user. You should not use
this directory for user data files. The contents of this directory
(with the exception of the Caches subdirectory) are backed up by
iTunes. For additional information about the Library directory, see
“The Library Directory Stores App-Specific Files.”
See full list (tmp/, Documents/Inbox) in iOS Standard Directories: Where Files Reside
UPDATE
I use NSFileManager method URLForDirectory:inDomain:appropriateForURL:create:error:
Like Caleb said, you can't write to your app's directory, but you can write to your app's Documents folder. You can get it like this:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
Your app's bundle is read-only. There is two ways I could see:
1) Write in documents folder:
NSArray *pathList = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *path = [myPathList objectAtIndex:0];
2) Use sqlite database. This is the same as 1 (you must save db in documents anyway), but you're using sqlite database. I think this is better than a lot of txt and plist files: here's a tutorial on the topic.
I use the following code :
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *appFile = [documentsDirectory stringByAppendingPathComponent:#"set.txt"];
NSString *data=#"Kostas";
[data writeToFile:appFile atomically:YES];
NSString *myData = [NSString stringWithContentsOfFile:appFile];
NSLog(#"Data : %# ",myData);
My app uses iTunes File Share. I used the code to delete a single file:
It worked the first time. On the second try, however, iTunes showed a empty share directory. It turns out all data files are gone. Can I recover those data files from the iPad? Thanks
- (void) deleteFileFromDisk: (NSString*) fileName {
if([self fileExists: fileName]) {
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) ;
NSString *documentsDirectory = [paths objectAtIndex: 0];
NSString* theFile = [documentsDirectory stringByAppendingPathComponent: fileName];
NSError *error;
[[NSFileManager defaultManager] removeItemAtPath: theFile error: &error];
There's no "restore" feature on the iPad. But in all probability there's nothing to worry about.
There's nothing about your code that would delete multiple files. It would delete just that file from the Documents directory that you supplied the name of as fileName. If you didn't call deleteFileFromDisk: multiple times, you didn't delete multiple files.
Perhaps at some point you deleted the app. That would delete its entire sandbox and thus would take with it anything in the Documents directory. That sort of thing is perfectly normal during repeated testing.
I save some run-time generated files inside the .app bundle of my iOS app. In the simulator it works fine, in the device it crashes:
Could create output files in the given shader cache path
'/var/mobile/Applications/CB064997-B40E-4FE3-9834-B3217CE33489/SimedTest.app/Ogre3D/assets/RTShaderLib/cache/
Is there a good overview of where I should and shouldn't put files - how to use Documents, Library and tmp, etc?
To clarify, these are files created at startup which pre-calculate some data to save time. IF they are not present they get created so it's fine they are deleted, but not while the app is running.
The bundle is read-only. You don't want to mess around with it for two reasons:
Code Signing: the signature is verified by against the contents of the bundle; if you mess around with the bundle, you break the signature.
App Updates: updates work by replacing the entire app bundle with a newly downloaded one; any changes you make will get lost.
Where you should save stuff:
Documents: if you want it to persist and be backed up
Library/Caches: if you just want to cache downloaded data, like profile pics; will be auto deleted by the system if it is low on room unless you specify with a special do-not-delete flag.
tmp: temporary files, deleted when your app is not running
For a full explanation check out File System Programming Guide and QA1719.
No, every time you change your bundle you invalidate your signature.
If you want to write files you`l need to write in the best folder depending on what you want to do with that file.
Documents folder for long duration files
Cache for small operations
and so on
EDIT
To get the path you`ll need something like this:
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:#"filename.ext"];
With this path you can write or read like this:
write:
NSString *content = #"One\nTwo\nThree\nFour\nFive";
[content writeToFile:fileName atomically:NO encoding:NSStringEncodingConversionAllowLossy error:nil];
read:
NSString *content = [[NSString alloc] initWithContentsOfFile:fileName usedEncoding:nil error:nil];